stuck....ls980 thinks it is the d800 - G2 Q&A, Help & Troubleshooting

my ls980 thinks it is the d800 and I can't seem to flash it back to the ls980.
I flashed a custom ROM thru twrp and I got an error. I tried restoring the backup and the system partition would not mount. after poking around for quite some time I tried restoring the phone in download mode. apparently the computer thought it was the d800 and flashed the system for that phone. when it restarted I saw the at&t boot screen and when it started up it was not working correctly.
I put it back in download mode and tried flashing the phone again. the computer was sure it was the d800. then I tried flashing manually using the DLL intended to convert this and the tot file for the ls980. I get the error saying I can't convert from the d800 to the ls980.
I then tried flashing thru adb from both windows and linux. both say they cannot find the phone regardless how I try connecting.
since I flashed the factory files the phone will not start in recovery mode I have no clue why.
so now I have a phone that:
will not flash the ls980 tot file,
will not connect to adb,
and will not boot into recovery.
now what?
-boxorandyos
<sent from my nexus4>

Dang dude. Harsh. I almost ended up in this same situation after downloading files for the wrong device and noticed literally at the last second and was able to pull the plug, literally, and save my device.
I've been looking for ways to fix it in case it happens again and I don't catch it in time, so if I find the answer I'll let you know. There has to be a way to trick the computer into thinking it's a LS980 like it's supposed to be the same way it thought the phone was a d800.
Sent from my LG-LS980 using XDA Premium 4 mobile app

I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>

yo
boxorandyos said:
I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>
Click to expand...
Click to collapse
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol

vegito6 said:
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol
Click to expand...
Click to collapse
woops im a little slow here. what is LGNPST ? I solved the issue by manually editing the build.prop file and that tells the lg mobile support tool that it is a different phone. that was a whole different complicated story of its own but it worked.
sorry I didnt see your comment until now.

def sounds like you used the wrong dll or just the stock lg dll which works with some phones, but others need their specific dll to match the tot and such to make a proper bootloader flash over i believe.

Related

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help
same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery
ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.
I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking
Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you
Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

[Q] Soft Brick help me please!!!

PLEASE READ EVERYTHING FOR BETTER UNDERSTANDING
Hey fellow LG Owner(s) I am writing this asking for some help. I know that majority of LG Phones use the same software and flashing tools regarding taking your phone back to stock. I currently own an LG G Flex (LS995 Sprint Variant) and I managed to soft brick my phone. I have posted this same message over at the LG G Flex Threads but so far I have gotten no one to provide me some sort of solution on how to un-brick or factory reset my phone.
The status of my phone before it got bricked was it had Root (IOROOT method), Busy-Box (by Jrummy), Build.Prop was edited to display as a Nexus 5, and boot-loader locked along with no custom recovery. If you’re wondering why my boot-loader was locked and why there wasn’t any type of custom recovery was due to the sad fact that Developers are having a hard time on cracking it.
Now to explain on how I soft bricked my phone. I was changing my font style by using a tool called ROM Toolbox (by Jrummy). I managed to change my font once and I attempted to change it a second time, since I was looking for something that displayed it wider and bolder. So as I applied install on the new font I got an automatic reboot.
The reboot consisted of the normal LG Logo display, followed by a black screen and staying as a black screen. On the upper left of my phone the notification indicator was flashing multiple colors (red, white, blue etc). This is the current state of my phone, black screen with a multicolor notification.
My attempts to fix:
- Simple reboot of the phone ((fail))
- Let the phones battery drain out then charge for a few minutes and restart ((fail))
- Managed to get into STOCK recovery and perform clean partition ((fail)
- Managed to get into STOCK recovery and apply factory reset ((fail))
- I got into some weird mode which also gave me the option to apply factory reset ((fail))
- I followed this tutorial (LG Flash Tool) on how to revert back to stock (by hyelton) ((fail))
Link to tutorial: http://forum.xda-developers.com/showthread.php?t=2644083
The tutorial by hyelton was almost successful to reverting back to stock firmware until I got to the last step (Number 6). The error that occurred by using the LG Flash Tool was when the tool attempted to flash the stock firmware it gave me a Download FAIL!! “Device Model is different“ notification (Images below). I did this tutorial at least seven times and I got no luck. Every single time that I attempted to do this I kept getting the same notification. I have now ran out if ideas on what to do.
My theory, I believe that by changing my build prop to display as a nexus 5 is the reason why I keep getting this fail notification. On the phone it-self when I put it into download mode it even displays as a Nexus 5 (Images below).
I was wondering since it’s possible to get into STOCK RECOVERY, I saw that it had an option for “ADB SIDELOAD” is it possible to push something thru ADB??? Any type of help is greatly appreciated and thanked. Please do not get upset that you see this in multiple LG threads, I am just trying to find a solution to UNBRICK this very expensive phone that I bought and I cannot afford to just use it as a paper weight. THANK YOU AND GOD BLESS
Here is a Link to all my files regarding STOCK tot,dll,lg flash tools,aboot, buildprop, lg usb drivers and adb drivers that are for my phone
Link: https://drive.google.com/folderview?id=0B1D8UNLjuTB6TWpCQ1pJME5qWk0&usp=sharing
i hope these files help anyone that are attempting to help me put my phone back to stock
Alright yall, I am almost official screwed. I purchased this phone about a month ago from Best Buy and they stated that I am out of there 15 day window so I cannot exchange or replace for the same phone. I then went to Sprint on whom I have phone insurance for and they stated that they cannot do anything and that I have to go to one of their Sprint repair stores. I went to one of the repair stores and the gentlemen that assisted me plugged my phone to his computer and immediately knew that my phone was rooted. So from there I played the dumb blonde card acting like I don’t know what he’s talking about and from there he directed me to call LG and see what they can do. So now the current status is I filed a repair request and now I am awaiting a reply from LG. Does anyone have any suggestion???
**SOLUTION** hey yall i got the solution to my problem and it was simply by downloading this universal custom .dll from
http://forum.xda-developers.com/show....php?t=2663369
and i managed to flash back to stock recovery using this guide. instead using the dll on the the guide i used the custom one.
*GUIDE BACK TO STOCK*
http://forum.xda-developers.com/show....php?t=2644083
BUMP
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
can you link me to where I can find the dll you are using?
XxZombiePikachu said:
can you link me to where I can find the dll you are using?
Click to expand...
Click to collapse
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
lingarajug said:
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
thanks for your response but unfortunately there is only one firmware for the sprint flex at the current moment.
christiam.coronado said:
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
Click to expand...
Click to collapse
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
XxZombiePikachu said:
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
Click to expand...
Click to collapse
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
christiam.coronado said:
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
Click to expand...
Click to collapse
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
XxZombiePikachu said:
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
Click to expand...
Click to collapse
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
christiam.coronado said:
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
Click to expand...
Click to collapse
what did you add to your build prop to make it think it was a nexus 5?
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
all that i did to the build prop was change the model to Nexus 5. luckily i have copied my original build prop to my computer. here is the ling to my google drive which i have saved my original build prop
https://drive.google.com/file/d/0B1D8UNLjuTB6UVBGZnhIaWEwNjg/edit?usp=sharing
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
attached below is an image of what my original build prop looked like with its original model as ro.product.model = LG-LS995
the LG-LS995 was the part that i replaced with Nexus 5
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
harrymason37 said:
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
how remember that my bootloader is still locked and this model does not have a custom recovery. but i am able to access the stock recovery with an option to ADB SIDELOAD. I got word from a DEV stating that:
"Factory recovery won't let you adb sideload a package without a LG verified updater script so it won't work." (by XDA justinswidebody)
but if he is incorrect i wouldn't mind attempting trial and error. what do you think???
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
ok ill try it out give me a minute
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
christiam.coronado said:
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
Click to expand...
Click to collapse
what's the version of your flash tool
edit: after some reading to flash nexus tots you need lg flash tool 1.8
re-edit: I believe that the dll needs to be modified so that it accepts the device as a nexus 5 but once it's done flashing it needs to make the device and ls995 again, but for now it's 1am and I need to be up early later so I'll work on something later, also just some extra information on ther stuff: as for flashing the build prop if you can manage to make it into a flashable update.zip(which also places it in corresponding directory) which is also signed and you can sideload it should flash or just give an error, and another thing that could work with above method is flashing a corrupted kernel which will throw your phone into fastboot mode and with correct files and commands you can repartition the entire device to stock(this one is very dangerous/risky would not recommend it)
XxZombiePikachu said:
what's the version of your flash tool
Click to expand...
Click to collapse
Setup_LGFlashTool_1.6.01.0529
its on my drive should i downgrade??? https://drive.google.com/file/d/0B1D8UNLjuTB6ekthOGRVMWE3ejA/edit?usp=sharing

[Q] My D803 (Bell) is a D801? WTH?

So long story short I screwed my phone up and had to use LG Flash Tool to make it work again. The weird thing is, when I tried to flash a D803 .TOT file the LG Flash Tool said "wrong phone model" or something along those lines. It then said "D801" was my phone model. I searched and searched and SEARCHED for Bell D801 and could only find people saying it's D803. Well, I said screw it and downloaded TMobile's D801 .TOT and flashed it. The phone works now but it has a TMobile boot animation. It still connects to Bell fine, but here's the main issue;
Part of my touchscreen doesn't work anymore and I'm still under warranty if I can just get the phone back to stock to have it sent in. How can I do this? Any help? Also, does flashing with the LG Flash Tool make it so LG can't see I ever rooted the phone?
Thanks!
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
danial.aw said:
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
Click to expand...
Click to collapse
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
cptnsmelly said:
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
Click to expand...
Click to collapse
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Funjet said:
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Click to expand...
Click to collapse
So are you saying there is no TOT? I cant get the kdz method to work... so i need a tot.
Ok so I typed my IMEI into some site and it said my phone is indeed a D803! However, because I flashed a TMobile .TOT to the phone, my phone thinks it's a D801. Oh god... How do I fix this now?
BUMP!
Hmm I'm not sure how you can go back but if you are within warranty you can try wrecking the system (so it doesn't work) and send it in for repair... They will reinstall a new version
Maybe your bootloader or whut was d801?? Idk but can you try to flash this kdz http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Canada+D803/
Then the one from bell? I hope its gonna be alright if you can flash it. Note that if you screw up with flashing then try not to wreck your system but try to repair it you itself since a system wreckage doesn't come fromself and lg doesnt need to pay the price to fix it. Even under warranty. I know lg screws up stuff but flashing is at own risk.
Edit: I sawmyour other thread so nvm.
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
cptnsmelly said:
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
Click to expand...
Click to collapse
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
wulsic said:
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
Click to expand...
Click to collapse
Thanks for the info, but how do I change the build prop? I tried the adb usb thing and I get "device closed"
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
cptnsmelly said:
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
Click to expand...
Click to collapse
Great to hear that it worked yes about that build.prop editing i wasn't clear sorry for that but good that it worked now.

LG Flash tool doesn't detect model, please help.

As you read. After a whole day of searching non-stop from day 'til night, I finally give up and ask for help.
I've tried to flash a Lollipop ROM, which resulted in my LG G2 D800 having a soft brick.
I already had this issue once, so I knew what I had to do. I used a Kitkat 20c TOT package to return to Stock Kitkat. However, I kept recieving an error;
Device Model Unknown, Check Model or DLL. Or something similar. Upon my first search, I found out about the custom DLL.
So I tried it. But I get another error; CrossDL [Unknown] to [D800]. I tried 3 different DLL files, modified the TOT file (Hex Editor paste write)
I also ended up flashing some img files I don't remember which post it was exactly, but it was from here.
My device no longer boots up, it gives me, however, the option to either reboot or go directly to download mode once I power it on.
Please note; before and after the img flashing. I kept having the same issue.
So in short, I have no idea of how to flash the tot file because it keeps giving me a Device Model error. It there truly a way for the LG FLash tool (1.8.1 I think) to simply ignore what model it is before flashing?
Also, I tried this on another computer, but no luck, same result. I'm doing this on my PC with a Virtual Machine (I run Linux Mint as a Main OS) so I'm truly unsure if it's that, though the first time I did it when I first had the issue, it worked just fine...
Any ideas, suggetions?
Edit :: Another reason why I'm posting this is because a lot, if not all people with a D800 with this issue, their posts are either ignored or discontinued. So if I get this fixed, I'll make sure to specify how I did.
bump?
buump?
lordsolrac2 said:
buump?
Click to expand...
Click to collapse
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Art Vanderlay said:
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Click to expand...
Click to collapse
I actually flashed This ROM
The first time I had this issue, it was because, I flashed CloudyG2 3.3.
Both the D800 Variants of the ROMs
It seems the issue is that I didn't have the kitkat bootloader (though, my device has Kitkat by default, so, why does it have this issue?)

Categories

Resources