Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
I am trying to connect my Note 3 to my computer and it will not mount as a device that is visible under windows. It was taken for service and when it came back it only connects to the PC as an ADB device, but not MTP when it is fully booted. I can flash firmware while in Odin, I can connect in bootloader mode, I just can not make it visible to transfer files from the computer directly to the phone via cable. Under device manager it says 'SAMSUNG Android ADB Interface'. USB debugging changes nothing either. My S3 shows ADB and MTP but the Note does not. I have attempted with multiple cables on 2 computers and get the same result. If anyone has a suggestion of a way to fix this without having to wipe again, I'd love to hear it. Thanks in advance.
So I'm trying to fix a friends bricked note 3, however Odin v3.07 will not recognize the device. I've downloaded samsung kies, however its still not working, not even my PC would recognize the device. The cable and ports are definitely not the issue, since my other phone can be recognized. Any help would be appreciated, thanks .
(if it helps, usb debugging isn't on)
umer283 said:
So I'm trying to fix a friends bricked note 3, however Odin v3.07 will not recognize the device. I've downloaded samsung kies, however its still not working, not even my PC would recognize the device. The cable and ports are definitely not the issue, since my other phone can be recognized. Any help would be appreciated, thanks .
(if it helps, usb debugging isn't on)
Click to expand...
Click to collapse
Try to uninstall kies and install samsung usb driver.
Sent from my SM-G925F
Are you using the original Samsung USB cable? I find that some Samsung phones are very picky about USB cables and USB ports used with Odin.
> I am not sure if Odin will recognize the device if debugging is turned off.
> Anti-Virus & Firewall programs can interfere with adb and/or device connection... open task manager and check the list of running programs as some background services could be the culprit.
> In Task Manager, Also check if adb and/or device driver is running, as at least one of those will be needed for your device to be recognized.
> If drivers are missing for the device, you can download Samsung mobile usb drivers from the Samsung website directly, but if you have Kies 3, chances are these are already installed but not always, especially if Kies 3 isn't even recognizing the device.
> Odin doesn't update live, make sure you plug in your phone first and once the device is acknowledged connected by the PC, open Odin and check for the blue bar in the top left confirming device added.
Hello! First, sorry for my bad english. In December after I install Android Nougat with Odin my pc doesn't recognized my phone. I tried different method but no one resolve my problem. I tried to :
1. Install drivers manually
2. Activate USB debugging from developers option
3. Connect my phone to different PC (Win 7/8/10 and Mac)
4. Factory reset
5. Change cable.
At device mannager appear Unknown USB Device and I install Samsung drivers manually.
My phone is not rooted.
PLEASE HELP ME!
does your phone charge when the cable is plugged into your computer ?
Prior to upgrade what type of connection did you have MTP or something else ?
My phone is charging when i plug in computer and is selected mtp connection .
I have Samsung grand prime SM G530H xcu.. i am experiencing a problem that mtp notification is not showing while connected to pc it only charges the phone.. I have tried many datacables and by connecting to different computers but no use.. i wantbto root the phone but cant be done wd out debugging and it shows root failed.. odin also did not detect my phone and pc also is not showing anything.. reinstalled all the drivers but no use..
Please help me in this regard..
Flash stock ROM
stock rom already installed..
Try ticking the USB debugging option in the developers option or vice versa. Another way is if you have another Samsung phone, plug that when the device drivers configure them completly then unplug that and plug this phone immediately
Uninstall driver and try again