Related
Hello first post here but have been using site for years now
Please Help
The battery on my Hd2 will not charge. The Light on the phone is orange when charging. The android systems show the phone charging but the charge continues to go down. here is what I have tried and what I do know
Thanks
-This is a Brand new Tmous Phone still in the box ordered from eBay
-I have flashed several roms and all of them think the battery is charging but battery is not charging
-I have tried the "center pin fix" but the battery is in place and the pins look great (new phone)
-Tried many different usb cables ( oem htc cable also )
-Have tried two different batteries and both do the same thing
-Have tried charging phone with sim card out as suggested
I am out of ideas.
-My current Rom is Dorimax-V7.1A- ANDROID VERSION 2.3.7
Have you tried to put WM 6.5 on it again(to see if the problem still exists)?
You should check the amperage of your charger. the mine say 1 amp and 5volts.
yes
HTCHDFERT said:
Have you tried to put WM 6.5 on it again(to see if the problem still exists)?
Click to expand...
Click to collapse
did not try but will
I have the exact same problem. It won't charge no matter the charger (tried two OEM) and the battery (tried two OEM). I installed WM6.5 but the problem stays. I thought it was form the voltage controller (possibly damaged by the ICS ROM), because USB sync used to work, but now that will not work as well. The LED also started to flash orange which confirmed my theory
Sometimes it's impossible to tell by looking at it but it's quite possible the pins on the female end (your phone) were damaged. Although it's much more likely the battery itself is toast. You could maybe try one of those knockoff $5 replacement batteries and test it's charging capability.
Worst comes to worse you could just use an external charger.
hi everyone,i got a problem of charng on my MT4G recently.Actually it happened since few hours ago.I searched,read reagarding MT4G charging issue,but this is not it.
Phone shows charging (settings>about phone> Battery)
Red light is lighting but No Charging Animation.
USB Mass Storage working!
Tried a factory rest,but still have the problem.
Tried many chargers & data cables,but nothing has changed!
What could be the matter?
TIA
If the battery is charging it's probably your ROM. Which one are you using?
Try clearing data and cache and reflashing the ROM. Sometimes that clears things up. It won't mess up any of your programs, but if you've altered anything in the system folder or changed the kernel it WILL revert.
Agree with estallings15 above. If the charging light appears, the battery is actually being charged and USB MS is functional - all that means the phone detects USB power (VBUS), and I'd start looking for faults from the ROM.
Thank you very much estallings15 & Jack_R1!It seems that.
Im on Stock Rooted GB ROM.
I turn offed the phone & start to charge.Then after 1 hour i power on it & see.Now the phone is charging,
It show charging animation (in early,it didn't show).BUT charging is extremely slow!It took 2 hours to charge from 30% to 32%!!I have installed Snake battery booster & it show remaing 5 hours to full chrage from 15%(current battery level)!!!
Anyway guys,i will try another rom after i get decent battery percent.Thank you very much!
Like i sad,
ROM - Rooted Stock GB ROM
Kernel - Default one which came from
If the charging is that slow - there is another option, but you're not going to like that one. Your battery or charging circuit on the board might be faulty.
your phone is using more current than the charger is able to deliver error
Jack_R1 said:
If the charging is that slow - there is another option, but you're not going to like that one. Your battery or charging circuit on the board might be faulty.
Click to expand...
Click to collapse
Thanks!What is the option??BTW,I just flashed Android Revolution HD & after few minutes,i got this message suddenly (see the attachment).What is now?Is this regarding charging port or something like you said ?
error is " your phone is using more current than the charger is able to deliver error"
I bought a charger off line once and it charged my phone about that slow all I did was switch chargers and it started charging it fast again
Sent from my Glacier using xda premium
I think the original htc charger is slower than motorola's one. Don't know which one is better for battery life.
I have gotten that message before not since buying a new charger after old one got shortage
Sent from my T-Mobile myTouch 4g using Tapatalk 2
crazykas said:
Thanks!What is the option??BTW,I just flashed Android Revolution HD & after few minutes,i got this message suddenly (see the attachment).What is now?Is this regarding charging port or something like you said ?
error is " your phone is using more current than the charger is able to deliver error"
Click to expand...
Click to collapse
It confirms my thoughts. If you're using a good stock charger (the one that's able to deliver 1A current) and you're seeing this message - it means that either your battery is dead, or the charging circuit in your phone is malfunctioning. Other problems are unlikely, given that you have functional USB. There is still a chance of something bad on the connector level (GND pin), but I can't say for sure if this is possible - never tried.
Jack_R1 said:
It confirms my thoughts. If you're using a good stock charger (the one that's able to deliver 1A current) and you're seeing this message - it means that either your battery is dead, or the charging circuit in your phone is malfunctioning. Other problems are unlikely, given that you have functional USB. There is still a chance of something bad on the connector level (GND pin), but I can't say for sure if this is possible - never tried.
Click to expand...
Click to collapse
I thought was using OEM HTC Datacable which bought from eBay.haha.Now im using HD 2 OEM data cable.That works fine.But seems litte bit lower charging speed than OEM Glacier data cable.Thank you for your help!
Jack_R1 said:
It confirms my thoughts. If you're using a good stock charger (the one that's able to deliver 1A current) and you're seeing this message - it means that either your battery is dead, or the charging circuit in your phone is malfunctioning. Other problems are unlikely, given that you have functional USB. There is still a chance of something bad on the connector level (GND pin), but I can't say for sure if this is possible - never tried.
Click to expand...
Click to collapse
Thanks every one,just had to use oem data cable.Than you again for your help!
I have a similar issue. My HTC MyTouch doesn't charging at all.
The charge light appears, the charging animation too, but the phone discharges like no charger connected.
I've used: charge from usb (pc) with Motorola, Samsung and Blackberry cables, 5V/1A charger, 5,7V/2A charger. No changes.
I'm on Stock rooted GB. The problem appears on Stock Froyo and before trying Gfree method. Even with the phone turned-off.
I've tried with two different batteries, also. No changes.
I hope you can help me. I believe that this is a hardware problem.
Thanks
Try a very short cable!!! (like 20cm) and good charger , not the usb of computer or notebook
padre629 said:
I have a similar issue. My HTC MyTouch doesn't charging at all.
The charge light appears, the charging animation too, but the phone discharges like no charger connected.
I've used: charge from usb (pc) with Motorola, Samsung and Blackberry cables, 5V/1A charger, 5,7V/2A charger. No changes.
I'm on Stock rooted GB. The problem appears on Stock Froyo and before trying Gfree method. Even with the phone turned-off.
I've tried with two different batteries, also. No changes.
I hope you can help me. I believe that this is a hardware problem.
Thanks
Click to expand...
Click to collapse
Change your rom. I notice very slow charging on some some sense roms. Still try jumping roms.
N_otori0us_ said:
Change your rom. I notice very slow charging on some some sense roms. Still try jumping roms.
Click to expand...
Click to collapse
Sure, now I'm on Albinoman's 4.3 ROM... the issue still appears
I believe that this is a hardware problem, with many chargers, many cables and two batteries there is no change.
thanks for your answer
Have you tried cleaning out any pocket lint from the port with a sharpened toothpick?
If you search xda you'll find some tricks for USB ports in general
Sent from my myTouch 4G using xda app-developers app
Hello,
since September I have charging problems with my Oppo Find 5.
Sometimes when I charge with a power supply it doesn't charge, it decreases then or stays at the same level.
I tried several different cables and chargers, but I coundnt find a connection to the charging behavier and the charging devices I used.
Tonight it was switched off and connected to the standard charger but switching it on in the morning: 0 %...
I'm using Cyanogenmod (Android 5.0.2), I thought of flashing another rom, maybe that will do it...
Has somebody another idea or has similar expiriences?
Best regards,
gragib
Hi... I had the same problem some wks ago. I think there is a mechanical issue, but I don't understand. Now I return to the official CM12 (the best ROM for my experience) and the charge is ok.
Maybe change the connector.
aliexpress.com/item/Original-Replacement-Parts-for-OPPO-Find-5-X909-USB-Dock-Charging-Port-Microphone-Vibration-Module-Board/32334200164.html
Hey Guys,
I really dont know what to do anymore.
My OPT needs 8 hours+ to fully charge everytime!
If I use my OPT to watch Videos it even drains faster than it charges.
The strange thing is if i shut it down and let it charge in the shut down mode ( with only battery visible on screen). The Charge time goes down to less than 2h. So a very normal charge time, that I experienced before.
It started the strange behaviour after i had OOS3 installed for 2+ weeks and never gone back.
Things i tried:
different roms: OOS2, OOS3, CM13, Exodu. Currently I am on Hydrogen OS-
different kermels: Boeffla, Sandy, AK, Stock.
different firmwares and recoveries (I know its useless but i tried everyhing)
wiping complete phone and reinstalling from 0 several times.
different cables / adapters and wall chargers. (Normaly using a 5-port 40w anker charger with anker cable. Every other config like car charger or orginal power adapter&cable same problem).
I have no problems with other devices like my tablet, powerbank, nintendo 3ds, Videogame controllers,... And even the OPT works but only if i shut it down.
I observe this problem now since the start of this month. Its so annoying i am basicly forced to have a power bank always with me.
I really hope you can help me
Could it be an update for one of your apps that has made the app run wild causing it to put phone under constant use? What does battery stat tell you about battery usage? Tried installing system monitor to check on installed apps and how much CPU time the use?
I googled alot and found something about ES File explorer that messes with charging. I deleted it now,
Other thatn that i only installed very common apps like whatsapp.... I dont think its the apps but its worth a try.
Running complete stock for 1 day with no 3rd party apps and recharge.
Same here...some voltage problem in your home....try charging turning phone off.
i would suggest you to use a voltage stabilizer in between your wall plug and your charger,
the one that you normally used for desktop pc
HandsomeOwl said:
Hey Guys,
I really dont know what to do anymore.
My OPT needs 8 hours+ to fully charge everytime!
If I use my OPT to watch Videos it even drains faster than it charges.
The strange thing is if i shut it down and let it charge in the shut down mode ( with only battery visible on screen). The Charge time goes down to less than 2h. So a very normal charge time, that I experienced before.
It started the strange behaviour after i had OOS3 installed for 2+ weeks and never gone back.
Things i tried:
different roms: OOS2, OOS3, CM13, Exodu. Currently I am on Hydrogen OS-
different kermels: Boeffla, Sandy, AK, Stock.
different firmwares and recoveries (I know its useless but i tried everyhing)
wiping complete phone and reinstalling from 0 several times.
different cables / adapters and wall chargers. (Normaly using a 5-port 40w anker charger with anker cable. Every other config like car charger or orginal power adapter&cable same problem).
I have no problems with other devices like my tablet, powerbank, nintendo 3ds, Videogame controllers,... And even the OPT works but only if i shut it down.
I observe this problem now since the start of this month. Its so annoying i am basicly forced to have a power bank always with me.
I really hope you can help me
Click to expand...
Click to collapse
Same issue here. Tried every sort of things. Was initially on CM13 Seraph08, moved to Grarak, then back to OOS3. No improvements, as the OP mentioned the issues are observed from the month of May. It takes 7-8 hours to charge 100%. Did anyone approached service center?
Have your also tried different cables and chargers? As quality of the cables that came with the phone can differ, and also the chargers. Some chargers seems to barely be able to output 1A even, nearing USB:s 800mA charging.
i also having same problem check the charger and cable if u r in oxygen os factory test mode
So most of the answers havent read my first post prolly.
I finally got the OnePlus sup to exchange my phone. With the new one i have no more charging problems.
So i think it was a hardware defect but I am not 100% sure.
how did u get the exchange of the phone ??
was it rooted ??
if it is having a custom recovery will they reject the warrenty ??
please reply asap
Just an observation, Benschholds kernel seems to have fastcharge support. See this recent commit in his source:
https://github.com/benschhold/andro...mmit/b5d1eed20c12a9e9db5128ace98efa51b0a97e19
I noticed these values aren't updated in the AOSPA kernel source for our device, so I'm going to try flashing this kernel and see if it works with AOSPA.
Edit: interesting, the stock OOS2 and 3 kernels do not have these values. So this may not help, or maybe it does, who knows.
Edit2: I tried to flash Benschholds on AOSPA and it DOES NOT WORK! I had to flash the old boot.img using fastboot to fix boot loop.
i had the same problem
i also tried many ROMs and kernels, no help
but now it's fine i'm using another cable
just change the cable(not the charger head)
right now i'm using nexus 6p cable (borrowed)
A friend was having this issue, he said he fixed uninstalling clean master app
Sent from my ONE A2005 using Tapatalk
Yea same issue in Exodus ROM.. Oxygenos 3 didn't have any issues lyk this..
No need for fastcharge in this case, OP2 can already suck almost 1,5A by default and that is a significant number, if connected to original or similar charger with high current output of at least 2A. There are ways to see exact number, like in kernel config apps (Boeffla does it for sure) or by installing apps like Ampere. Compare your cables and charger adapters
Same issue!
My Op2 used to take around 2.5 hrs to completely charge .. Just after i installed cyanogenmod 13 my charging capacity got tooo bad. Its taking more than 5hrs to charge the device. After changing roms from cm13 the battery capacity has not Changed
According to me due to some issue in cm13 the battery charging time has become too bad. Please help currently on oxygen os 3.5.8.. when i use my
phonr while charging at times it evn discharges. Tried moto g4 plus charger due to which the charging time reduced a
bit.
ashwathb24 said:
My Op2 used to take around 2.5 hrs to completely charge .. Just after i installed cyanogenmod 13 my charging capacity got tooo bad. Its taking more than 5hrs to charge the device. After changing roms from cm13 the battery capacity has not Changed
According to me due to some issue in cm13 the battery charging time has become too bad. Please help currently on oxygen os 3.5.8.. when i use my
phonr while charging at times it evn discharges. Tried moto g4 plus charger due to which the charging time reduced a
bit.
Click to expand...
Click to collapse
Replace usb cable & try a different charger.
Same problem here
It take 12hr from 2-100% charging, can anyone help. It happened suddenly, I dought on recently update by oneplus.
The phone was supposed to Quick Charge, it is doing slow charge, not even normal charge.
Can anyone help. I never used custom ROM on my phone.
kunalkrishna85 said:
It take 12hr from 2-100% charging, can anyone help. It happened suddenly, I dought on recently update by oneplus.
The phone was supposed to Quick Charge, it is doing slow charge, not even normal charge.
Can anyone help. I never used custom ROM on my phone.
Click to expand...
Click to collapse
Oneplus 2 was never designed to be Fast Charge ready.
I've had problems like: random reboots, slow charging, battery drain. But after flashing the (considered most stable) 3.1.0 firmware + Boeffla kernel everything was ok again.
But you probably tried it already I guess.
Hello boys! I have a very serious problem with my LE PRO 3. Since yesterday, the following is happening BUG: When I connect the charger, it does not load immediately. It only loads if I reboot the device. And if I take it out and put it back, it stops loading again. This also happens when I connect to the PC. The device only recognizes if I leave the cable connected and restart. With the headset the same thing. It only recognizes if I leave it connected and restart the device. I'm on the Cydrass Google edition ROM, and my device is the x720 version. I have already switched to other ROMs (LineageOs, Ressuection Remix, and even the Chinese STOCK ROM 26s, and the problem still persists!) Apparently it's a serious problem recognizing my USB port I do not know what else to do! Please, help me!
even first buy , do you have problem ?
To Vitor_147
Remember, if you change the stock original LeEco rom you cannot say "have a problem with my LePro3", it's no longer the original combo "LePro3" (hardware + software) so expect (and accept) anything (better or worse!) and report the defects to the rom developer.
Now some helping things!
Apart to clean the phone usb c port and to try a new usb cable, you can:
With the usb cable connected, switch the usb debug off (or on) (developer options) then check if your computer detect your phone.
Even if your computer doesn't detect the phone or your phone seems not charging battery, if the usb cable (and charger) is good in 99% of the cases it charges the battery even if not at full charge rate (expect a minimum 4 hours charge time).
Before to give up, the last try is to bring your phone back to factory conditions with everything (but everything!) under the exact conditions of how it came out of the factory, then you can start over there and have an idea of whether the phone has a hardware defect or if it's just a matter of software.
I hope you solve the problem, if you find the right solution please report it here, so other users can learn how to solve this problem! Cheers!
orsonbear said:
To Vitor_147
Remember, if you change the stock original LeEco rom you cannot say "have a problem with my LePro3", it's no longer the original combo "LePro3" (hardware + software) so expect (and accept) anything (better or worse!) and report the defects to the rom developer.
Now some helping things!
Apart to clean the phone usb c port and to try a new usb cable, you can:
With the usb cable connected, switch the usb debug off (or on) (developer options) then check if your computer detect your phone.
Even if your computer doesn't detect the phone or your phone seems not charging battery, if the usb cable (and charger) is good in 99% of the cases it charges the battery even if not at full charge rate (expect a minimum 4 hours charge time).
Before to give up, the last try is to bring your phone back to factory conditions with everything (but everything!) under the exact conditions of how it came out of the factory, then you can start over there and have an idea of whether the phone has a hardware defect or if it's just a matter of software.
I hope you solve the problem, if you find the right solution please report it here, so other users can learn how to solve this problem! Cheers!
Click to expand...
Click to collapse
I already wrote this up in Omni thread, so I'll keep it short. I've also been experiencing this same issue for a while now, it first happened on stock rom, reboot solves it. Darko tried a fix in his eas kernel, seems to fix it (so maybe somehow kernel related). I believe it might be somehow related to the usb-c controller, cause I found cases online of similar issues with pixel phones (i believe the controller manufacturer is the same as in our phones). I actually know the exact moment when my problems first began, after I used my OTG adapter to connect a usb mouse. Few hours after that, the phone wouldnt charge.
{Disclaimer - this part is purely my theory}
I think it maybe somehow related to a safety "switch/fuse" of sorts, or something to do with static discharge or something similar, and here's why. I did a loot of trial and error since the first time it happened to me cause it scared the sh*t outta me, thinkin my phone is broken. I am vigilant about careful handling of usb ports and such, (ocd-ish really) so theres no way I physically damaged it, its not loose one bit, cleaned it out, tried wiggling the cable around anyway, has no effect, so I excluded the possibility of a faulty port/soldering. A few occurences to note
No1 - if I plug my phone in the charger first, and then plug the charger in the outlet, it breaks the port, I have to reboot to fix it. But plug the charger in the outlet first, then the cable to the phone - no problem. (Static discharge of sorts?)
No2 - since it started happening, the only way my usb-c OTG adapter works is if i first plug the adapter in the phone, and then the desired usb device in the adapter. If i try to plug the adapter in the phone w/say a usb stick already connected to it - no go, doesnt work.
Oh... I'm sorry for what happens to your phone! It's true the safest way to charge a phone avoiding current surge/spikes/shocks is to plug first the charger to AC outlet, then the usb c plug to the phone, then the usb plug to the charger. If possible, never plug/unplug the charger to/from the AC outlet if the phone is connected to the charger.
When the phone is full charged, first unplug the cable, not important which side first, then unplug the charger. If the phone is still charging, better unplug first the cable from the charger side to avoid micro spikes on the usb c port.
If you cannot obtain a normal behavior of the usb c port neither with reflashing the phone with the "qfil" system, perhaps a logic port of the usb c port is burned or simply in undetermined state, in the last case a total battery discharge may reset the logic port state and the phone can works fine once fully recharged. I'm sorry I can't help you better at this time! Cheers!
Sent from my LEX720 using XDA Labs
@orsonbear, thats my train of thought aswell, micro discharges occuring while plugging/unplugging causing the controller to freak out, or potentially damage the tiny connections (micro usb only had 4 wires vs 24! in usb-c). But I believe the problem lies somewhere on the software/firmware side, mainly because a reboot solves any issue I have. And also I just remembered, the first time it happened to me was a couple of days after I updated my firmware while updating to 19s, or 20s, cant recall precisely. Anywho, for me it's a minor nuissance, not like the OP who can only connect his phone once before rebooting (I can go for weeks before it occurs).
orsonbear said:
Oh... I'm sorry for what happens to your phone! It's true the safest way to charge a phone avoiding current surge/spikes/shocks is to plug first the charger to AC outlet, then the usb c plug to the phone, then the usb plug to the charger. If possible, never plug/unplug the charger to/from the AC outlet if the phone is connected to the charger.
When the phone is full charged, first unplug the cable, not important which side first, then unplug the charger. If the phone is still charging, better unplug first the cable from the charger side to avoid micro spikes on the usb c port.
If you cannot obtain a normal behavior of the usb c port neither with reflashing the phone with the "qfil" system, perhaps a logic port of the usb c port is burned or simply in indeterminated state, in the last case a total battery discharge may reset the logic port state and the phone can works fine once fully recharged. I'm sorry I can't help you better at this time! Cheers!
Sent from my LEX720 using XDA Labs
Click to expand...
Click to collapse
Yes,
I thought about letting the phone down completely, and see if that does not happen anymore!
Same problem here
Days ago it start happen, exactly how you say, i never change the stock software and it start happen randomly, I have to reboot to recognize anything that I plug into the USB c port, I try factory reset and change from 26s to 23s and it keeps happening so maybe I'm pretty ****ed, someone help me, in my country no one will fix the port u.u (sorry for my English).
Hellao! I'm having a very similar issue, charging works fine and the pc detects the phone but OTG and the audio on my headset is not working. Did someone of you find a solution to this problem?
1. x720, x722 or x727?
2. Where did you buy the phones? (Store names)
3. What kind of USB-C cable were you using? The one that came in the box? Have you used other USB-C cables and adapters to see if it works?
This could be hardware failure due to a lack of QCing from LeEco (just your average hardware issue) or a USB-C cable issue. It's ver. 1.0 on all LeEco Pro 3 models (right)? So I can't say it's the cable for sure. Has anyone attempted to take the phone apart to replace the port? do they even sell the port replacement?
Similar problem for me. About a month ago my headset stop working and the phone did not recognize it at all, tried with the adaptor to 3,5 mm jack and did not work either. Charging worked though.
Found a replacement chip with usb c port and ordered. Yesterday i replaced the charging port, but still the headset do not work at all, and connection to PC does not work ether. Charging still works as usual.
I ordered the phone from grossoshop 7 month ago with their rom. Tried this evening to upgrade the rom from 5.8.018 to 5.9.020, still grossoshop but no difference... It should not be a hardware problem as i replaced the type c port.
Should i try to flash another rom to see if there's any difference?
Any other suggestions?
Thankful for any ideas
Linkan78 said:
Similar problem for me. About a month ago my headset stop working and the phone did not recognize it at all, tried with the adaptor to 3,5 mm jack and did not work either. Charging worked though.
Found a replacement chip with usb c port and ordered. Yesterday i replaced the charging port, but still the headset do not work at all, and connection to PC does not work ether. Charging still works as usual.
I ordered the phone from grossoshop 7 month ago with their rom. Tried this evening to upgrade the rom from 5.8.018 to 5.9.020, still grossoshop but no difference... It should not be a hardware problem as i replaced the type c port.
Should i try to flash another rom to see if there's any difference?
Any other suggestions?
Thankful for any ideas
Click to expand...
Click to collapse
Have you tried switching cables? Could you have broken a contact or something while swapping the port out? Have you tried putting the old port back in to see if the computer recognizes the phone with it? Unfortunately you're gonna have to try everything, even if opening it back up again is tough. LeEco phones aren't exactly known for their build quality. Are you x720? Well, flash whatever ROMs you can, I guess. Might as well try everything.
sk8223 said:
Have you tried switching cables? Could you have broken a contact or something while swapping the port out? Have you tried putting the old port back in to see if the computer recognizes the phone with it? Unfortunately you're gonna have to try everything, even if opening it back up again is tough. LeEco phones aren't exactly known for their build quality. Are you x720? Well, flash whatever ROMs you can, I guess. Might as well try everything.
Click to expand...
Click to collapse
Yes, I have tried to switch the cables so no problem with them. Have not done a swap back again as the problem seem to be similar as before, so maybe a change to a different rom will be the next step for me. If change of rom does not work, maybe then I'll try to swap port again.
And yes, It's a X720
Thanks for fast reply.
Linkan78 said:
Yes, I have tried to switch the cables so no problem with them. Have not done a swap back again as the problem seem to be similar as before, so maybe a change to a different rom will be the next step for me. If change of rom does not work, maybe then I'll try to swap port again.
And yes, It's a X720
Thanks for fast reply.
Click to expand...
Click to collapse
Maybe it's not plugged in or attached correctly so the phone doesn't detect it. Sounds like a hardware issue to me, in all honesty. I once took apart my iPhone 5 to replace the non-functional home button and it wouldn't work no matter what I tried. I had to remove the battery, reseat it, and then attach the home button again. It finally worked after a reboot.
just report in on this thread, I as well recently purchased an x727 experienced the similar issue. Basically as described above no matter what roms i test is always have some sort of camera errors when charging.
sometimes charging doesn't work or camera doesn't work I have to reboot to get it to work. extremely annoying. I think it is hardware related.
Anybody else have a solution?
blanktape said:
just report in on this thread, I as well recently purchased an x727 experienced the similar issue. Basically as described above no matter what roms i test is always have some sort of camera errors when charging.
sometimes charging doesn't work or camera doesn't work I have to reboot to get it to work. extremely annoying. I think it is hardware related.
Anybody else have a solution?
Click to expand...
Click to collapse
i got charging problem dude after second day of use just got it last night x727.ffs.
i replace the usb board and the problem persist, i don't know what to do anymore, if someone has passed this problem please speak I am about to smash this damn bugged phone
Anthp said:
i replace the usb board and the problem persist, i don't know what to do anymore, if someone has passed this problem please speak I am about to smash this damn bugged phone
Click to expand...
Click to collapse
This my advice to anybody considering buying this phone don't why you will get zero support from letv.
I got luckey I have zero problems with phone .
I recommend spending more money and getting a supported phone by the maker.
If you do buy one buy it from Amazon where get a warranty on it.
Sent from my LEX727 using xda premium
Somebody fixed thuis allready as my le2 x626 only detects charging by USB when in fact its connected to the AC adapter.
And extremly slow charging from 9 to 100 % more then ó hours.
Also the phone`s microphone is nog working at all!! And the headphone is nog working!
please help