Hey everyone, I will try to explain this as best as possible. I have the Cingular 8525. My touch screen thinks something is touching it. For example, I turned on screen taps in the sound settings, and I can hear it randomly tapping whenever I'm not touching it. Normally I would think its malfunctioning but when I take out the battery and let it sit for about 10 minutes and turn it back on, the screen will work for a little bit then I will hear the clicking sound. I have flashed it back to the stock ATT rom and it still does it. Any hope that this is a software issue?
Sorry man it is not software issue. Better fix it in to do it yourself thread, search for yourself. Or send it for repairing
Ok, thanks for the quick reply. I was hoping, oh well.
Hello everybody. I have an issue with the screen wake up. I use this rom, the latest version. Everytime I end a conversation the screen is turning off. That is normal. But the problem is, I cannot wake it up afterwards. The hardkeys backlight is turning on for just a moment and off. The only solution is taking out battery and booting Android once again. I know that changing the build would might be helpful but this ROM is really fantastic and I would like to avoid changing it. Could anyone help with this? Thanks.
boober78 said:
Hello everybody. I have an issue with the screen wake up. I use this rom, the latest version. Everytime I end a conversation the screen is turning off. That is normal. But the problem is, I cannot wake it up afterwards. The hardkeys backlight is turning on for just a moment and off. The only solution is taking out battery and booting Android once again. I know that changing the build would might be helpful but this ROM is really fantastic and I would like to avoid changing it. Could anyone help with this? Thanks.
Click to expand...
Click to collapse
This question would be better answered if posted in the thread created for the ROM. The other users may also be experiencing the issue and have a solution, or the chef may not even be aware of the problem and should be notified.
This is not the rom's problem, ...
it's your proximity sensor, quick fix is to put it under a bright light or zap it with an IR remote (the proximity sensor is located top-left
Hello!
I've tried to research as much as possible regarding this issue. Either I'm the only one interested in it or the option is right in front of my eyes and I am blind.
Anyways, I have a fantastic widgetlocker set up. My only problem is that I want to keep using the stock sliders (Ripple, Light effect, etc.) as a means to unlocking my phone. Why? I love that I can unlock the phone on any part of the screen and that the light follows my finger without me touching the phone. Call me crazy, but it's the little things.
Does any one know if this is possible? Thanks!
Hey guys,
Please help me for resolving my screen. Everytime i reboot or shutdown my phone the screen its like not the best resolution, seems like blury or something. but after i lock and unlock the phone the screen went back to normal. Whats happening with my screen? Its really bugging me. i attached a screen shot so if anyone can see
Thankyou
Sent from my GT-I9500
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Same is the case with me. I was asked to try resetting any changes made in the Performance menu. Try it, this may help.
Sent from my Yu Yureka (AO5510), from the XDA Android App.
Hi there,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Please explain more clearly-
If your phone is not waking up by double tap or by power button, does it wake up on an incoming call ?
How can you say that rest of the phone is working fine ?
YUREKA YU screen blacked out after reducing brightness
My phone display is blacked out after i reduced the brightness bar... can anyone help how to enable the screen
Flash a torch at tip of the phone near the sensor....then you have to be quick to increase the brightness
As someone reported, if you enable automatic brightness and color correction and reduce the brightness to the lowest, the screen would switch off forever. The only way back is a factory reset or restoring an backup.
just managed to fix this
I was in a real hurry yesterday and must have accidentally set brightness to all 0. And then bam..black screen
here's how i fixed it.
Downloaded this: http://droid-at-screen.ribomation.com/installation/
This mirrors the phone screen on pc using the jar file. Needs adb debugging to be enabled and accessible from pc.
Doesnt allow you do send touch inputs though.
Probably other solutions exist, like miracast etc. But the above app was my first try and it worked.
I kept my super awesome OPO next to the yureka, as a reference for screen position.
looking at the yu screen on pc, i activated, logged in to the phone, and then pushed my brightness up. All on a blank display. Also doing the same in parallel on the OPO, for reference point.
And, the yu screen lit up.
(if not this, may have to edit some system files, but didnt work in my trials..or backup device and then factory resent and then restore back)
How to fix screen goes dark after manually setting brightness zero
Almost all users are facing this issue. If you manually move the brightness slider to low (extreme left) the screen goes completely dark. You will not be able to see the screen. I tried it but kept the finger on the slider at all time so that I could move the slider and get the right screen brightness.
If you had manually changed the brightness to low and removed your finger from the slider. You sure are looking at a blank screen though the phone is still active. To fix it you will need to blindly follow these instructions. Your phone screen is dark, you will not see anything, unlock the phone (hope you are using swipe to unblock). Once done use two fingers to swipe from top screen to bottom. Note you will still see a blank screen, now tap and hold the finger in the center screen a slightly above the volume down button line – that is where the brightness slider is. If you don’t see the screen lighting up, tap again around the same area, you will get.
ok
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Change rom
Slight clarification
sunny765 said:
Flash a torch at tip of the phone near the sensor....then you have to be quick to increase the brightness
Click to expand...
Click to collapse
This was the exact problem I faced rather than as mentioned every where fix for
Proximity sensor .Tourch solution is the quickest one to resolve it.
In my case I used another smart phone to put light on yureka just there where microphone or message notification led is there.Miraculously it works yureka reflect back then
You bring back normal brightness.Explaining this as original and was too short to
Comprehend easily.
9111710426
Plz off adoptive brightness
Sent from my AO5510 using XDA Free mobile app
Go to Settings>Display.
And turn off the Adaptive Brightness.
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Though this issue may have been solved , the problem mostly is the proximity sensor setting. In dialer, dial *#*#7769#*#*.
This is the setting/calibration window. Press start and keep your ear to the sensor. Remember the value and press exit. Mine was 49.
please help me i ve done some mistake in flashing the yureka...i was installing lollipop on yureka by cmd after flash is done i ve disconnected my device after that my phone was not switching on i ve opened it and take the help of some pins inside my phone got detected in pc and charging led was coming...charging sound was also coming...but the display is black it is coming like blue screen and off coming and going please help me to get my phone back