Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Same is the case with me. I was asked to try resetting any changes made in the Performance menu. Try it, this may help.
Sent from my Yu Yureka (AO5510), from the XDA Android App.
Hi there,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Please explain more clearly-
If your phone is not waking up by double tap or by power button, does it wake up on an incoming call ?
How can you say that rest of the phone is working fine ?
YUREKA YU screen blacked out after reducing brightness
My phone display is blacked out after i reduced the brightness bar... can anyone help how to enable the screen
Flash a torch at tip of the phone near the sensor....then you have to be quick to increase the brightness
As someone reported, if you enable automatic brightness and color correction and reduce the brightness to the lowest, the screen would switch off forever. The only way back is a factory reset or restoring an backup.
just managed to fix this
I was in a real hurry yesterday and must have accidentally set brightness to all 0. And then bam..black screen
here's how i fixed it.
Downloaded this: http://droid-at-screen.ribomation.com/installation/
This mirrors the phone screen on pc using the jar file. Needs adb debugging to be enabled and accessible from pc.
Doesnt allow you do send touch inputs though.
Probably other solutions exist, like miracast etc. But the above app was my first try and it worked.
I kept my super awesome OPO next to the yureka, as a reference for screen position.
looking at the yu screen on pc, i activated, logged in to the phone, and then pushed my brightness up. All on a blank display. Also doing the same in parallel on the OPO, for reference point.
And, the yu screen lit up.
(if not this, may have to edit some system files, but didnt work in my trials..or backup device and then factory resent and then restore back)
How to fix screen goes dark after manually setting brightness zero
Almost all users are facing this issue. If you manually move the brightness slider to low (extreme left) the screen goes completely dark. You will not be able to see the screen. I tried it but kept the finger on the slider at all time so that I could move the slider and get the right screen brightness.
If you had manually changed the brightness to low and removed your finger from the slider. You sure are looking at a blank screen though the phone is still active. To fix it you will need to blindly follow these instructions. Your phone screen is dark, you will not see anything, unlock the phone (hope you are using swipe to unblock). Once done use two fingers to swipe from top screen to bottom. Note you will still see a blank screen, now tap and hold the finger in the center screen a slightly above the volume down button line – that is where the brightness slider is. If you don’t see the screen lighting up, tap again around the same area, you will get.
ok
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Change rom
Slight clarification
sunny765 said:
Flash a torch at tip of the phone near the sensor....then you have to be quick to increase the brightness
Click to expand...
Click to collapse
This was the exact problem I faced rather than as mentioned every where fix for
Proximity sensor .Tourch solution is the quickest one to resolve it.
In my case I used another smart phone to put light on yureka just there where microphone or message notification led is there.Miraculously it works yureka reflect back then
You bring back normal brightness.Explaining this as original and was too short to
Comprehend easily.
9111710426
Plz off adoptive brightness
Sent from my AO5510 using XDA Free mobile app
Go to Settings>Display.
And turn off the Adaptive Brightness.
suri68 said:
Hi everyone,
My phone display is not waking up by double tap or by power button and hence i'm not able to use the phone. Rest of the phone is working fine.
I'll be grateful if somebody could help me out on this issue.Thanks in advance.
Click to expand...
Click to collapse
Though this issue may have been solved , the problem mostly is the proximity sensor setting. In dialer, dial *#*#7769#*#*.
This is the setting/calibration window. Press start and keep your ear to the sensor. Remember the value and press exit. Mine was 49.
please help me i ve done some mistake in flashing the yureka...i was installing lollipop on yureka by cmd after flash is done i ve disconnected my device after that my phone was not switching on i ve opened it and take the help of some pins inside my phone got detected in pc and charging led was coming...charging sound was also coming...but the display is black it is coming like blue screen and off coming and going please help me to get my phone back
Related
"Description:
With G-off display you can turn off the screen by rotating and holding the phone upside down and holding it like that for a second.
To save battery while listen to your favorite music, simply point your phone downward, light off. All background processes remain.
Require G-sensor found in the latest HTC devices like Diamond / Pro / HD, etc."
Download
Just what I need! but...
Hi
This is a nice app that i've wanted. I know I could use Changescreen as it has a similar feature, but a standalone like this is more preferable for me...
But I just can't download from Rapidshare...
Is it possible to load the .cab here since its only 345kb? or a mirror to somewhere else...
Anyways, Thanks for pointing this App out...
bulletproof_78 said:
Hi
But I just can't download from Rapidshare...
Click to expand...
Click to collapse
I haven't got any problem downloading
thanks a million bro...
Works like a Charm!!!!
Installed on my TP doesnt seem to work and no progam icon to make any type of changes?
great idea. tried on my Omnia, works fine. but screen powers on only with Power button
installed on my touch pro, but doesnt seem to do anything any ideas, would really like to have it working am on WM6.5 if that makes any difference...
cheers!
Installed on my Diamond
it's ok
After a call is not working so
only works after soft reset.
Anyone same problem? solution?
Thejackal_71 said:
After a call is not working so
only works after soft reset.
Anyone same problem? solution?
Click to expand...
Click to collapse
Same problem here. I have to kill it with task manager and run it again It's faster then softreset...
Hello
how about battery drain pls?
not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
I got a question are there any options? like on conference call (when using loud speakers - device is upside down), will it ignore the g-off? Because I am not sure what would happend if I would press POWER BUTTON in the middle of the call just to get the screen back ..
Not working in my Touch Pro, too
Using latest WinMobile 6.5.21935.
I also did a softreset after installation!
Mashe said:
not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
Click to expand...
Click to collapse
You don't see it. But it is there. Go to the Program Files and the directory with the same name. Click once on it, and tune the device upside down. It will switch it off.Not ON again.
You can link to it.
I got a question are there any options? l..
Click to expand...
Click to collapse
No options. no nothing! It does work on my TD 1
origin of g-off display
Beware! I am NOT the programmer. I don't know who is either. I just found it.
btw ChangeScreen has a "display off" option too.
worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.
worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.
sorry for the duplicate post above--tried to edit, then hit save by accident
edit... i just tried screenchange and it in theory seems to do exactly what i want, but in practice, with 2.78 and any sensitivity level and appropriate no light option checked, it turns off the display even if there is light (and lots of it to be sure). i hold the device upside down above my head and the display goes off. i'm not covering the proximity sensor. my proximity sensor does work when in a phone call. i tried rebooting. i think the proximity sensor may be off somehow on my device...maybe htc only wants it on in a phone call? i will have to see if screenchange will work right with the device in a phone call... further posts will go over with screenchange.
btw, regarding the forum... its annoying that my edit made a whole new post in the first place.
cool！！！thanks
Still tested different NAND-Android Roms on my HD2 but got still a problem. If i make a phone call and the screen turns black while calling i press the endkey to end the phone call. But instead of turning on the device, the screen stays black and i need to pull the battery and restart the phone.
If i make a phone call and use the free speaking funktion, while the screen don't turn off, i got no problem when ending the phone call.
I don't know what the problem could be, but it seems, that the thing has to do with the sensor who turns the screen on and off. But i don't know if this is the problem and/or know how to fix this problem. Like i said, i tested different Android Roms formated the SD-Card, deleted cache and all the stuff, but nothing fixed this problem. :-(
28 Views and no one with this problem? :-(
There are 2 other threads discussing this issue already. Here is one.
http://forum.xda-developers.com/showthread.php?t=946012
Issue lies with the light/proximity sensor. Could be defective hardware. Could be incorrect sensor drivers. Could be dirty sensors. I have yet to take mine apart to check for dirt on sensors. Blowing into the led/earpiece opening seemed to help. I notice if it doesn't come back on I can hold a very bright light (ex: cigarette lighter) about an inch away and the screen comes on as long as the lighter is lit. Sometimes it stays on.
thanks for your answer. seems to be more things to test and maybe solve this problem. Thanks!
THANK YOU Agoattamer!
Your link helped me to solve the problem! I just cutted a little piece of my screen protector, where the proximity sensor is, and got no more freezes after the phone calls! The screen protector still got two holes for the light and proximity sensor, but this seemed not to be big enough. Anyway, thank you a lot for your post!
wake up problem
Palerider-de said:
Still tested different NAND-Android Roms on my HD2 but got still a problem. If i make a phone call and the screen turns black while calling i press the endkey to end the phone call. But instead of turning on the device, the screen stays black and i need to pull the battery and restart the phone.
If i make a phone call and use the free speaking funktion, while the screen don't turn off, i got no problem when ending the phone call.
I don't know what the problem could be, but it seems, that the thing has to do with the sensor who turns the screen on and off. But i don't know if this is the problem and/or know how to fix this problem. Like i said, i tested different Android Roms formated the SD-Card, deleted cache and all the stuff, but nothing fixed this problem. :-(
Click to expand...
Click to collapse
I also tried a a lot of different NAND ROM and I had also this problem and I can't use Android efficiently. Now I am using hyperdroid ROM ( first GBX now CM). With this ROM and sanity app (from market, with correct settings you can find with trying) I almost solve this problem. ( probability of 95 % I don't get this error)
hey guys! i found the solution goin through the market!
download an app called "Sanity" theres a free version in the regular android market.
go to the settings > general > check "Reverse Proximity" (This will give you some warning about not using it if you DONT have a buggy proximity sensor). Check it anyways. Then go back to preferences then click "Proximity" scroll down and uncheck Turn off screen and leave leave the Turn on screen checked. this will force your phone to stay on during calls so that it never has to go through the proximity phase of calls this no more black screens. Hope this was helpful ^_^
anthonydo1991 said:
hey guys! i found the solution goin through the market!
download an app called "Sanity" theres a free version in the regular android market.
go to the settings > general > check "Reverse Proximity" (This will give you some warning about not using it if you DONT have a buggy proximity sensor). Check it anyways. Then go back to preferences then click "Proximity" scroll down and uncheck Turn off screen and leave leave the Turn on screen checked. this will force your phone to stay on during calls so that it never has to go through the proximity phase of calls this no more black screens. Hope this was helpful ^_^
Click to expand...
Click to collapse
Does any other one tried this solution ???
Hi everyone, welcome to the next thread of mine where I would like to share with you an interesting case of a'faulty' proximity sensor. The issue with the sensor started a few weeks ago (I own my defy for a few months) and the problem I had with it was that sometimes during I was making a call the screen was not being turned off, and more whats more annoying - the screen was never turned on again after finishing the call.
I do not have a screen protector and the screen glass is original.
I downloaded an application that showed the state of the sensor and after a many examinations i found out that many times the sensor does not distinguish between the states of being covered and uncovered.
I tried everything - factory reset, clean installations, different ROMs - nothing helped. The only thing that helped a little was a tweak availale in the CM7 ROM by Quarx (not available in the STABLE CM7 though!) in the screen settings menu -which forced the screen to be turned on after finihing a call, and I could also set the power button to end a call in the accessibility options. So this helped but did not solve my problem.
Fortunately, after many questions asked on so many threads, the user monecafe PMed me with a link to a video where its clrealy shown what is the problem and how easy it is to fix it!
without sayng more - here is the solution for anybody experiencing this issue:
http://youtu.be/uMk1S90MjbY
I hope this helps !
& a BIG THANK YOU to monecafe who sent me this video
this is great, very simple solution but...
how will that affect the water resistant feature of our defys?
try turning off auto-brightness
posting to say... try turning off auto-brightness (worked for me)
I used to have this problem. Stable CM7.2 solves this issue for me. I used to get the screen to turn on before by just rubbing the area with the proximity sensor with my thumb as if it was dirty.
i still have this problem. , after the Waterproof failed with my phone ( i dont leave it in water, i just wash it !! the proximity sensor failed too when i make a call screen is black cant see anything..so my question is if i change the screen touch proximity sensor work?? or its on the board ? where is the proximity sensor place?..how can i solve this problem by myself.
i saw the video but not solve the problem..
i back to stock ROM _there_ if i press power button the screen back but in coustoms ROMs the screen off not back till remove the battery!! any software make screen on at call and disible the proximity sensor ?
thank you inadvance
dlshad said:
...if i change the screen touch proximity sensor work?? or its on the board ? where is the proximity sensor place?
Click to expand...
Click to collapse
No, it's on the board.
Auris 1.6 vvt-i said:
No, it's on the board.
Click to expand...
Click to collapse
THANK YOU PROBLEM SOLVED ITS WAS ABOUT A SMALL PLASTIC IT WAS OFFICER OF WORK PROXIMITY SENSOR A SMALL PLASTIC!! THANK YOU ALL THIS VIEDO HELPED ME TOO AT TIME 2:50
http://www.youtube.com/watch?feature=endscreen&NR=1&v=5eiFQ39Ypmc
CAN I GET THE TECHNICAL GUIDE(MAP) OF BOARD?
I also have problems with proximity sensor. With pressure on the screen where the sensor is located it is working again.
So I can believe that changing the screw pressure might solve the problem. But what is the initial reason for this? It is not a pressure sensor!
Hello All, I've been using the proximity sensor app on my DHD for quite some time now... LOVE IT ! However, now when I open the app & tap on Start & cover the proximity sensor on the phone, there is NO RESPONSE... Meaning the msg stays FAR... It DOES NOT change to NEAR.... Can anyone help me out ? CHEERS !
Proximity sensor Star N8000
asimriz said:
Hello All, I've been using the proximity sensor app on my DHD for quite some time now... LOVE IT ! However, now when I open the app & tap on Start & cover the proximity sensor on the phone, there is NO RESPONSE... Meaning the msg stays FAR... It DOES NOT change to NEAR.... Can anyone help me out ? CHEERS !
Click to expand...
Click to collapse
Hello all,
My 1st post. Pls i dont want any lectures on chinese clones, thats what some of us can afford! i Just got a Star N8000 which is a clone of a Samsung Note. I LOVE the phone. The only problem is that when make a call lets say to check voicemail, the screen goes black, the proximity sensor flashes continuosly (small red flashes) & nothing i do brings the screen back unless the call ends from the other side or i take out the battery. I dont want to root my phone just yet. It uses a tmd2771 proximity sensor. HELP! anybody
Solution??
Davyin04 said:
Hello all,
My 1st post. Pls i dont want any lectures on chinese clones, thats what some of us can afford! i Just got a Star N8000 which is a clone of a Samsung Note. I LOVE the phone. The only problem is that when make a call lets say to check voicemail, the screen goes black, the proximity sensor flashes continuosly (small red flashes) & nothing i do brings the screen back unless the call ends from the other side or i take out the battery. I dont want to root my phone just yet. It uses a tmd2771 proximity sensor. HELP! anybody
Click to expand...
Click to collapse
Found a possible Solution suggested by a supplier on Amazon;Switch off the phone - Hold power button & volume down button
simultaneously to bootinto factory testmode - use volume swith toscroll thru to 'test report' - select with the home key - scroll down to 'PS calibration' - select it then scroll to 'do calibration' let it do the calibration till it gives OK.Go back to 1st menu & reboot.
Was only partially successful forme, it may work for you.
Davyin04 said:
Found a possible Solution suggested by a supplier on Amazon;Switch off the phone - Hold power button & volume down button
simultaneously to bootinto factory testmode - use volume swith toscroll thru to 'test report' - select with the home key - scroll down to 'PS calibration' - select it then scroll to 'do calibration' let it do the calibration till it gives OK.Go back to 1st menu & reboot.
Was only partially successful forme, it may work for you.
Click to expand...
Click to collapse
I have the same problem with proximity sensor tmd2771 my phone is htc one x clone (E1911)
i make the calibration but its still have the problem it saws me the sensor goes up and then goes down from itself and at the calls the screen goes black and opens again from itself is there a solution for that???
Davyin04 said:
Found a possible Solution suggested by a supplier on Amazon;Switch off the phone - Hold power button & volume down button
simultaneously to bootinto factory testmode - use volume swith toscroll thru to 'test report' - select with the home key - scroll down to 'PS calibration' - select it then scroll to 'do calibration' let it do the calibration till it gives OK.Go back to 1st menu & reboot.
Was only partially successful forme, it may work for you.
Click to expand...
Click to collapse
Is this applicable for Motorola Defy or for the Chinese clone?
I tried this on my Defy running JB 4.1.2. I cannot get into the "factory testmode" even after pressing the VOL down key at boot up.
I just get a screen with an exclamation and the android bot.
Nothing happens after that.
BTW: What size of screw driver should I use to perform the trick in the video posted by the OP.
Not applicable to original defy
Sent from my MB526 using xda premium
Holy sh't it worked <333333333333
I cannot believe. IT WORKS. Its bugging me from the start..
your_login
thank you for the useful posting
queBurro said:
posting to say... try turning off auto-brightness (worked for me)
Click to expand...
Click to collapse
Yes finally this seems to be working for me too. Thanks
Thank you for so excelent video. I have same problem but just for sometimes. I will check will this help.
Can anybody post this video on dailymotion or any other video hosting site as youtube is blocked in my country. I really would appreciate that as I am having problem with my Desire HD's proximity sensor.
I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Sounds like Doze.
I don't find anything related to Doze or "standby" about this screen.
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
David_26 said:
I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Click to expand...
Click to collapse
thophan1975 said:
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
Click to expand...
Click to collapse
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
Sounds like there is an issue with the proximity sensor (not light sensor).
It's setup to turn the second screen off as well as disable knock on if the phone is in your pocket. Even during daylight hours if you put your finger within an inch of the sensor when the main screen is off, it should trigger it.
It seems your sensor may just be messed up.
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
There are a few apps on the play store you can try to fix it if you are rooted. You could also try a sensor app to see if the proximity sensor is showing feedback properly although you might need to be rooted for the apps to show the proximity sensor properly (not sure). My note 4 had a hardware test in the service menu not sure how to do it on V20 though.
Same Issue
Edit: Resolved the issue. Please read this post. There is a small rubber gasket-type thing that sits in the hole of the phone's frame where the proximity sensor is positioned. That rubber gasket was not included with my replacement screen. I pulled the rubber piece out of my original, broken screen, and installed it into my replacement screen. I am no longer having issues with the phone in the dark.
I am experiencing the same issue. I have a T-Mobile LG v20 (H918) and I cracked the screen last week. I ordered a replacement LCD assembly and installed it myself. Everything works fine during the day or in a well lit room, but at night, in a dark room, I experience all of the issues you are reporting. I am finding other posts online with our same issue, but as of yet, no resolution.
Even though the second screen is set to always be on, at night, in a dark room, it turns off almost immediately after locking the phone. It is almost as if the phone is in a "deep sleep" or something, because the following also occurs:
Knock On will not wake the phone
Fingerprint sensor will not wake the phone
Even connecting to the phone via AirDroid / AirMirror the phone doesn't wake
Need to press the power button multiple times to wake phone
Providing a light source immediately turns on second screen and resolves all issues
Hi.
I have problem with proximity sensor. While making a phone call, display is always on.
I tried to enable it in settings. Turned it on, rebooted my phone and nothing happened.
Also tried *#*#6484#*#* solution, and when I open proximity sensor, there are 'test' and 'error' buttons on the screen and I can't click anything.
Does anyone know how to fix this?
In the engineering menu * # * # 6484 # * # * we find 27 - Proximity sensor
When approaching the palm to the front camera should show "0".
I always showed "5", did not want to be calibrated.
I pressed Error, went out and went to the engineering menu, a miracle happened - it was calibrated.
stanley56 said:
In the engineering menu * # * # 6484 # * # * we find 27 - Proximity sensor
When approaching the palm to the front camera should show "0".
I always showed "5", did not want to be calibrated.
I pressed Error, went out and went to the engineering menu, a miracle happened - it was calibrated.
Click to expand...
Click to collapse
No, nothing happened. As usuall, screen is always on.
Yes, proximity sensor in settings was on and I have rebooted the phone.
I really don't know what to do. Is it because of bug in Global Rom or is it hardware malfunction?
Fortis10 said:
No, nothing happened. As usuall, screen is always on.
Yes, proximity sensor in settings was on and I have rebooted the phone.
I really don't know what to do. Is it because of bug in Global Rom or is it hardware malfunction?
Click to expand...
Click to collapse
Hold your phone with your left hand. The placement sensor gets blocked by your right ear when you make calls using your right hand. Give it a go and get back to us.
DelphinusMinor said:
Hold your phone with your left hand. The placement sensor gets blocked by your right ear when you make calls using your right hand. Give it a go and get back to us.
Click to expand...
Click to collapse
Ok, non-related to left and right hand.. Now my phone gets black screen all the time during calls. I can't put it on speaker or do anything while talking with someone. I really don't know what's happening...
Fortis10 said:
Ok, non-related to left and right hand.. Now my phone gets black screen all the time during calls. I can't put it on speaker or do anything while talking with someone. I really don't know what's happening...
Click to expand...
Click to collapse
I can't help there but left/right holding is an issue I guess with this phone. Or maybe it's the Pro. I forget offhand.
Fortis10 said:
Ok, non-related to left and right hand.. Now my phone gets black screen all the time during calls. I can't put it on speaker or do anything while talking with someone. I really don't know what's happening...
Click to expand...
Click to collapse
Obviously the proximity sensor is at fault. Enter the menu using the code mentioned above, then press the menu/options button and select Calibrate proximity sensor. Once you're there, hold your hand over the proximity sensor (to the right of the front camera) and tap the Calibrate button. That's one thing that could fix it.
Failing that, go to incoming call settings and turn off the proximity sensor (turn off screen in call). Restart your phone, go to the same toggle and turn it on.
If neither of these works, you likely have a faulty piece of hardware. Your last option is to have the phone repaired or try a different kernel/ROM.
Fortis10 said:
Hi.
I have problem with proximity sensor. While making a phone call, display is always on.
I tried to enable it in settings. Turned it on, rebooted my phone and nothing happened.
Also tried *#*#6484#*#* solution, and when I open proximity sensor, there are 'test' and 'error' buttons on the screen and I can't click anything.
Does anyone know how to fix this?
Click to expand...
Click to collapse
Hi , are you on miui global stock rom? Or custom rom?
I just had the same issue , but in my case , I recently opened the bootloader and installed xiaomi.eu rom, everything was working fine. I got notification of update ,I downloaded the update , but flash it thru TWRP , and then with the new update, the proximity was not working at all. Flash again the new rom, but wiping everything , and now works.
jonathan_jon said:
Hi , are you on miui global stock rom? Or custom rom?
I just had the same issue , but in my case , I recently opened the bootloader and installed xiaomi.eu rom, everything was working fine. I got notification of update ,I downloaded the update , but flash it thru TWRP , and then with the new update, the proximity was not working at all. Flash again the new rom, but wiping everything , and now works.
Click to expand...
Click to collapse
Is the EU rom that better?
I mean is there any plane to compare the known issues between the global and EU ?
I'm using the miui global 10.3.3.0 PFGEUXM and definitely have some "issues" with the proximity sensor.
I'm still trying to tie down the exact nature of the problem:
With a quick test, or doing calibration, it seems to work exactly as I would expect; the screen switches off as you approach closer than about 2 inches.
However during a long call I notice the display start to flash "on" frequently in the corner of my eye and soft keys can get inadvertently pressed.
It kinda feels like it gets worse during the call, is it time or perhaps the phone warming up in my hand? Not sure.
hi @All!
is there still no permanent solution for fixing proximity bug?
its really annoying and making me crazy....
even after making it working again using quicktune app - doing one call it is broken again
fasty said:
I'm using the miui global 10.3.3.0 PFGEUXM and definitely have some "issues" with the proximity sensor.
I'm still trying to tie down the exact nature of the problem:
With a quick test, or doing calibration, it seems to work exactly as I would expect; the screen switches off as you approach closer than about 2 inches.
However during a long call I notice the display start to flash "on" frequently in the corner of my eye and soft keys can get inadvertently pressed.
It kinda feels like it gets worse during the call, is it time or perhaps the phone warming up in my hand? Not sure.
Click to expand...
Click to collapse
Exactly what i've experienced.
Super annoying when you accidentally hang up during a call.
It happend countless times so far.
I'm on eu beta btw.
Wish there would be a solution.. . But afaik proximity is even more bugged in non miui custom roms.
I had this problem to. my proximity sensor what not responding at all. I thought it was defective because the calibration was not working to.
Then i went to the system update settings, downloaded the latest package and flashed it. After reflashing it started working with no problem at all.
Factory reset did the trick for me. Working normally now.
Install Quick Tuneup. Then do Sensor Celebration & Restart your device twice.
Two solutions
Fortis10 said:
Hi.
I have problem with proximity sensor. While making a phone call, display is always on.
I tried to enable it in settings. Turned it on, rebooted my phone and nothing happened.
Also tried *#*#6484#*#* solution, and when I open proximity sensor, there are 'test' and 'error' buttons on the screen and I can't click anything.
Does anyone know how to fix this?
Click to expand...
Click to collapse
It turns out that the problem is because MIUI does not activate the proximity sensor when the smartphone is turning on.
To force MIUI to ALWAYS activate the sensor at each start, we can do two things:
1- Always have "Automatic brightness" activated
2- Activate the "Pocket mode" (the best choice)
After applying one of these situations, it is necessary to restart the phone.
Only by activating the pocket mode it is no longer necessary to have automatic brightness activated all the time.
In the video I show how to activate the "pocket mode"
w w w . youtube.com/watch?v=2dfrqmH02O8
I published this solution in a forum in my country (Colombia).
w w w . laneros.com/temas/soluci%C3%B3n-sensor-de-proximidad-xiaomi.239997
I don't speak English, I had to use the google translator, sorry for any translation error.
2- Activate the "Pocket mode" (the best choice)
After applying one of these situations said:
KMILO_PARRA is a KING .........................
above is proof to SOLVE the Proximity Sensor no reaction in my Redmi Note 7.
I was having lots of TASKER Profile depending on whether or not Proximity Sensor is covered.
I found all those Profiles no more function due to the issue after I believe OTA to Global rom the latest ( August-2019 )
Thanks again to KMILO_PARRA
Click to expand...
Click to collapse
Actually, the proximity sensor for Redmi Note 7 isn't in the "usual" top-center position, it's a little bit on the top-right edge (if you watch the phone "against the light" you can actually see a small dot on that side).
If you're calling\responding try to put your ear at that angle, you'll never have those problem anymore.
I know it seems crazy, and of course the first times could be "unusual" to put the ear there, but it actually worked out flawlessly for me.
Mr
Quaresma_7 said:
Obviously the proximity sensor is at fault. Enter the menu using the code mentioned above, then press the menu/options button and select Calibrate proximity sensor. Once you're there, hold your hand over the proximity sensor (to the right of the front camera) and tap the Calibrate button. That's one thing that could fix it.
Failing that, go to incoming call settings and turn off the proximity sensor (turn off screen in call). Restart your phone, go to the same toggle and turn it on.
If neither of these works, you likely have a faulty piece of hardware. Your last option is to have the phone repaired or try a different kernel/ROM.
Click to expand...
Click to collapse
Thanks.....
It works for me
Hi guys,
I have made a little workaround, using the suggestion of @KMILO_PARRA user. (pocket)
https://taskerprofilecenter.blogspot.com/2019/09/project-proximity-sensor-workaround-for.html
This is mainly for Tasker users, but I have generated an APK to be installed too. So any user can use it. But what is needed, by now, is root, as it needs to write to Settings table.
Please, report me back if it does the job or not.
Note1: For those users that don't know how Tasker works, just install the app, and give it root permissions, and allow Write System Settings permission (Android option). I recommend you to not set it as an app to be killed from the OS using the battery optimization, as it could be killed. It acts on every shutdown and device boot.
Note2: It will generate two permanent notifications: Place holder, and the one that is the mini-Tasker code monitor (required). Just, disable the Place holder one, as described in the same notification (click on it), and disable notifications completely for the installed app to get rid of the last one.
---------- Post added at 12:44 AM ---------- Previous post was at 12:31 AM ----------
What it does exactly?
Well, as I explained on my web, it just changes the value (0/1) from the 'enable_screen_on_proximity_sensor' Global Settings table, that makes the pocket option to be toggleable in an automated way.
So, be sure not to use that option as a daily one, as the project/app uses it to allow the sensor be available at startup. And do not forget that you will need root too! Sorry.
What to download if I don't know what Tasker is?
You will only have to download the APK from the 'Kid App (APK)' link, provided under the 'DOWNLOAD' section. Nothing else.
If you know Tasker, you will know what to do.
Does it work really?
I'm currently testing this workaround, but as I could see, at least on my device (lavender too), seems to be working as expected. But needs to be tested a little more.
So, if it does not what it's intented for, please, report it me back.
After installing the app, giving root permissions, and allow it to modify system settings, reboot the device to take it effect.