I got a SD card that I've formatted in my phone but I just tried to copy a movie (a copy of a Blueray I own) of around 6GB to the card but it fails. I then removed the SD card and inserted it into my Windows 10 computer and tried again after which I'm told the file is too big for the file system on the card. There is plenty of free space on the SD card.
Isn't it possible to have large movie files on the SD card? If it is: What is the trick?
Which file system has the SD been formatted with? See the SD Properties in Windows.
themissionimpossible said:
Which file system has the SD been formatted with? See the SD Properties in Windows.
Click to expand...
Click to collapse
The phone always formats to FAT32 - and if I format to NTFS the phone complains that the SD card is damaged and has to be formatted. It can't even read the NTFS formatted card.
FAT32 is limited to 4GB max file size.
You must format the SD card with exFAT, which also Windows reads/formats perfectly.
themissionimpossible said:
FAT32 is limited to 4GB max file size.
You must format the SD card with exFAT, which also Windows reads/formats perfectly.
Click to expand...
Click to collapse
Do you know if the S7 Edge can work with exFAT or ?
Yes, of course, I use an exFAT formatted 64 GB SD card in my S7E...
Great - I'll format my card right away then! Thanks
Related
Right now its FAT, I never formatted it, I just jammed it into the device.
Should I format FAT32? Anyone know?
TIA.
Best to stay FAT if you format to FAT32 your device may not recognize your card. If you ever do format it - do it on the device using storage tools or sktools.
I've used only one of my two 1gb mini-SD's to hold PocketMusic program files and MP3's. I think it was formatted FAT to begin with, but I was unable to copy more than 400mb to the card until I reformatted it to FAT32. It then loaded up with MP3's and there have been no problems. I did the formatting on the PC, not the MDA.
Any card >2gb will require FAT32 formatting, as 2gb is the limit for FAT16.
Probably this topic should be in a different place, but In some way is connected to my BA.(Im using xplode's WM6). Ok back to problem. So I have 4gb SD card and I can only copy files on it after format. If I want to add sth on a card files became damaged.(I have only one chance to write files if i want to add sth I need to copy all files back on my pc then foramt card and then copy files back on Card). Problem is connected to my BA because when i copy files on a device and from device on my card(by resco explorer) files are ok(i dont need to format card). So where is the problem??
I wish you understand what I'm talking about
Are you sure you have 4GB SD card and not SDHC? SDHC cards are not supported on BA.
I'm sure. Its weird cause when i copy file from phone memory to storage card files are ok. But whem I'm copying directly from PC to card throug card reader(or wm5torage) files are damaged,unless I make a format but format halps only for one time.
May I know the file system of your SD card?
file system of windows NTFS. System of card FAT32
i had this prob. on my previous card its due to the file format. Beyond 2 gb fat do not works so it goes to fat32 and but these non sdhc card keeps running on fat so this happens. in ideal form the 4gb sd should be 4gb sdhc to work properly.
this causes me to switch to 2 2gb sd card instead of 1 4gb. I also advice u to take backup regularly because u never know when they stop working properly.
so if its file system problem why my 1gb card i working(fat32 as well as 4gb). That could mean that 4gb card is damaged sp why its workin after format and why I can copy from phone without mistakes? Is there any way to change file system on a card? By windows formating i can only format fat32
Hi,
I want to root a Simple Touch Glow and was following the steps using SD_2gb_clockwork0rc2.zip.
The trouble is that is designed for a 2GB card and mine is 16GB. Can I use it? If not, is there a version for the 16GB card or do I need to buy a 2GB card?
Thanks in advance!
Yes, you can always use a bigger SD card than necessary.
If you are writing an image to the card you may end up with the drive appearing as if it were a smaller size.
When you are all done you will have to reformat the drive to get it to be its full native size.
For instance, writing Noogie to a 4 Gig SD card will work fine.
When you are done, the card will appear to be only 70 Megs.
Just reformat the card.
Windows can not low-level format an SD card.
Partition Wizard can. http://www.partitionwizard.com/
Renate NST said:
Windows can not low-level format an SD card.
Partition Wizard can. http://www.partitionwizard.com/
Click to expand...
Click to collapse
As can SD Formatter, and the Nook can as well from the settings.
i have a 128gb micro sd card what should i format it to and what program to use
The S4 only recognizes the FAT and EXFAT file formats. Simply insert your SD card, go to settings, storage, and then SD Card. From there, you can let Android format your card for you.
If you're worried about speed, file formats don't offer much benefit for Android devices.
Hi, as you all know Mi A1 supports Micro SD card, but I have question about the file system that it will support. I prefer the phone can use either NTFS or exFAT so that I can put files that is larger than 4GB on the memory card. But seems like the OS can't read both file format, only FAT32. Any idea?
Android OS generally is compatible with exFAT and FAT32.
NTFS is proprietary from Microsoft. So It cannot write to NTFS. (Solutions exist though, not worth the hassles)
More details can be found here.
I insert SanDisk 64GB card, exFAT
FS not recognized
insert the memory card to the phone.. then it'll show do you want to format it, do it..
after it's done, try moving the files you want to the memory card
VecH said:
I insert SanDisk 64GB card, exFAT
FS not recognized
Click to expand...
Click to collapse
Same here you mast format sd card and than works u can chose to merge with phones memory or to leave it like that.
Mad4Red said:
Same here you mast format sd card and than works u can chose to merge with phones memory or to leave it like that.
Click to expand...
Click to collapse
After format file system is fat32
Try ApoMgr3.
Yes m1a1 will automatically format SD card now use the above to automatically shift your apps to it provided you use a very fast card.
yes, i face same problem. i want copy 6GB size videos to OTG flashdisk, but i didnt support with FAT32, also NTFS and ExFAT didnt support on Android Oreo too. didnt know how to fix.
For ExFAT you need to change the kernel to one that supports that file system.