Does MiniSD card need to be specially formatted? - 8125, K-JAM, P4300, MDA Vario General

Right now its FAT, I never formatted it, I just jammed it into the device.
Should I format FAT32? Anyone know?
TIA.

Best to stay FAT if you format to FAT32 your device may not recognize your card. If you ever do format it - do it on the device using storage tools or sktools.

I've used only one of my two 1gb mini-SD's to hold PocketMusic program files and MP3's. I think it was formatted FAT to begin with, but I was unable to copy more than 400mb to the card until I reformatted it to FAT32. It then loaded up with MP3's and there have been no problems. I did the formatting on the PC, not the MDA.
Any card >2gb will require FAT32 formatting, as 2gb is the limit for FAT16.

Related

SD Card problem?

Probably this topic should be in a different place, but In some way is connected to my BA.(Im using xplode's WM6). Ok back to problem. So I have 4gb SD card and I can only copy files on it after format. If I want to add sth on a card files became damaged.(I have only one chance to write files if i want to add sth I need to copy all files back on my pc then foramt card and then copy files back on Card). Problem is connected to my BA because when i copy files on a device and from device on my card(by resco explorer) files are ok(i dont need to format card). So where is the problem??
I wish you understand what I'm talking about
Are you sure you have 4GB SD card and not SDHC? SDHC cards are not supported on BA.
I'm sure. Its weird cause when i copy file from phone memory to storage card files are ok. But whem I'm copying directly from PC to card throug card reader(or wm5torage) files are damaged,unless I make a format but format halps only for one time.
May I know the file system of your SD card?
file system of windows NTFS. System of card FAT32
i had this prob. on my previous card its due to the file format. Beyond 2 gb fat do not works so it goes to fat32 and but these non sdhc card keeps running on fat so this happens. in ideal form the 4gb sd should be 4gb sdhc to work properly.
this causes me to switch to 2 2gb sd card instead of 1 4gb. I also advice u to take backup regularly because u never know when they stop working properly.
so if its file system problem why my 1gb card i working(fat32 as well as 4gb). That could mean that 4gb card is damaged sp why its workin after format and why I can copy from phone without mistakes? Is there any way to change file system on a card? By windows formating i can only format fat32

How do I use my previous 8gb MicroSD card...

I have put the card I used to use in my Raphael in to my HD2 and yes it saw it for a few seconds then 'poof' as if by magic it was gone! After trying several times cleaning the contacts etc I gave up.
Then I realised it was FAT32 and the newer 2GB card that was shipped with the phone was FAT format. So I wiped the card and reformatted to the FAT. Now its just not seeing it at all. Hmmm
I bought the SanDisk 8GB card with HC so it would be faster to access.... is this messing it up?
ANY IDEAS ITS DRIVING ME MAD!!!!!!!!!!!!!!!
try to format it with the Control Panel> Administrative Tools> commputer Management> Disk Management
formatted sd card
Yeah thats how I did it originally, not its just freezing up everything that I put the card into.
DOH, HELP!
ne1 got ideas?
FAT support only storage up to 2GB, FAT32 2-32GB. So it has to be FAT32.
Try SD-hotfix for HD2 http://forum.xda-developers.com/showthread.php?t=602527
I recomend Panasonic SDformatter 2.0 to clear your card (FAT32)

[Q] Help, my 16GB now shows as 8GB after 1GB partition in ClockWorkMod

I received a new 16GB micro SD card and put it into my phone.
I partitioned it in ClockWorkMod and started moving files (Music, photos etc) from the computer to my new card. While copying the blue screen of death came up on my laptop. This never happened before but upon reboot I tried to carry on copying files and it came up saying I have to format my card. I tried to format but it refuses to so I tried a full format, that didnt work either.
My 16GB micro SD card is now reading as 8GB. Can anyone help???
Have you tried removing the partition in gparted and then formatting?
Try using Panasonic SD Card Formatter
LiFE1688 said:
Try using Panasonic SD Card Formatter
Click to expand...
Click to collapse
I have, it comes up as saying the memory card failed to format.
You can't just format...you're going to have to repartition the card. You can use gparted like nokn suggested or any of the various windows partition tools out there. After you have set up the partition(s) you can format the card.
Just wondering what settings you used with the SD Formatter?
Did you enable RESIZE? Did you do a FULL Format with Erase on?
These two settings are pretty important. Another thing to look at would be [email protected], you can "KILL" a whole drive, which essentially writes a ZERO from beginning to end of the drive.
bdkinney said:
You can't just format...you're going to have to repartition the card. You can use gparted like nokn suggested or any of the various windows partition tools out there. After you have set up the partition(s) you can format the card.
Click to expand...
Click to collapse
I opened up a program called Partition Wizard and I managed to unallocate the partition and then resize the card to fat but only up to 8GB. It still refuses to be formatted or for anything to be written on it.
LiFE1688 said:
Just wondering what settings you used with the SD Formatter?
Did you enable RESIZE? Did you do a FULL Format with Erase on?
These two settings are pretty important. Another thing to look at would be [email protected], you can "KILL" a whole drive, which essentially writes a ZERO from beginning to end of the drive.
Click to expand...
Click to collapse
In SD Formatter v3.0.0.0 I opened options I selected Format Type as Full Erase and Format Size Adjustment as On and it came back as failed. Now my card is showing up as 8MB . It is also saying the memory card is write protected.

128 gb card format question

i have a 128gb micro sd card what should i format it to and what program to use
The S4 only recognizes the FAT and EXFAT file formats. Simply insert your SD card, go to settings, storage, and then SD Card. From there, you can let Android format your card for you.
If you're worried about speed, file formats don't offer much benefit for Android devices.

File size on SD card

I got a SD card that I've formatted in my phone but I just tried to copy a movie (a copy of a Blueray I own) of around 6GB to the card but it fails. I then removed the SD card and inserted it into my Windows 10 computer and tried again after which I'm told the file is too big for the file system on the card. There is plenty of free space on the SD card.
Isn't it possible to have large movie files on the SD card? If it is: What is the trick?
Which file system has the SD been formatted with? See the SD Properties in Windows.
themissionimpossible said:
Which file system has the SD been formatted with? See the SD Properties in Windows.
Click to expand...
Click to collapse
The phone always formats to FAT32 - and if I format to NTFS the phone complains that the SD card is damaged and has to be formatted. It can't even read the NTFS formatted card.
FAT32 is limited to 4GB max file size.
You must format the SD card with exFAT, which also Windows reads/formats perfectly.
themissionimpossible said:
FAT32 is limited to 4GB max file size.
You must format the SD card with exFAT, which also Windows reads/formats perfectly.
Click to expand...
Click to collapse
Do you know if the S7 Edge can work with exFAT or ?
Yes, of course, I use an exFAT formatted 64 GB SD card in my S7E...
Great - I'll format my card right away then! Thanks

Categories

Resources