When i flashing my Tablet (Lenovo A3000-H) it is stopped at 38%, i download new Firmware, and re-installed new VCOM Drivers, and try to make format all+Download, but the problem still running, I Tried to change my PC and re install the firmware again, but the problem still running.
i changed the ROM i make different ROM but it didn't work, there is some thing make the flash tool stop and can't install it's files.
The error which appear:
S_DA_SDMMC_WRITE_FAILED (3149)
is there any software solutions, or i have to make a hardware solutions? please help !
Related
Hello friends,
I need help, I'm desperate.
My K3 note died for no reason, I was using it hung up and now will not turn over. When I turn on the charger it does not appear any LED on the phone
I was one month using a custom rom, and he was with root and TWRP Recovery.
I installed MTK SP FlashTools, downloaded the Stock ROM VIBEUI 6.0 and try to make the flash'm finding the following error: Error Brom: S_storage_not_match (3182). Already tried other Stock Roms and all have the same error.
What can I do my friends? I lost cell phone?
Thank you
That error means the tool detects a mismatch between rom and phone. Are you using the latest usb drivers? The com port on the lower right looks different. Usually it says preloader instead of MTK port. Try uninstalling the usb drivers and use a different one. Also, change the Firmware Upgrade option to Download Only. One other thing, try with another rom file, possibly and older version rom first and see if it works. Changing the usb cable and port used won't hurt either.
If nothing works, your phone's EMMC might be dead..
How recover emmc for lenovo k3 note
try this its work for me
in sp flash tool try delete all+dowmload option in the firmware upload its work but after this you will lost your imei and original mac address. after this youy need to recover imei but if you don't know your mac address you can't change your mac addresss. its change every time when you on your wifi.
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
Reposting it here, since this is the Lenovo sub-forums. Probably may find more help here.
I was using the Allegro ROM for the A1000G and it was running fine and dandy without any problems. Last night I tried installing a game and after I restarted it, it didn't turn on. I thought that maybe the device had low battery or something. So I plugged it in and let it charge for an hour and it still didn't turn on. Than I let it charge overnight and in the morning, it still doesn't turn on. So I tried to flash the Stock ROM for Lenovo a1000g and I got an error saying the storage was different or something - Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182) [Edit - Tried to find the error, this is the one]
It was probably because the Allegro ROM was installed before it stopped working. So after that failed attempt at Flashing the Stock ROM - I don't get the battery indicator anymore and no matter what I try inside SP Flash Tool, it doesn't detect the device and the flashing process doesn't work. I tried installing and uninstalling all the MTK and Mediatek drivers but still not working. It shows up as MediaTek DA USB VCOM (Android) but it doesn't disappear, unless I remove the usb cable.
Before when I flashed the Allegro ROM and as seen across other youtube tutorials and guide, the device would show up for 2-4 seconds before disappearing and the SP Flash Tool would start working. Now it is just blank and the MediaTek DA USB VCOM (Android) doesn't go, no matter what.
Please, I would appreciate help. Since I don't have much knowledge regarding this. What must I do? I am depending on you guys.
~Aaron.
Bump. Please someone help.
__PUMA__ said:
Bump. Please someone help.
Click to expand...
Click to collapse
Thread closed as duplicate. I have left this one open
https://forum.xda-developers.com/th...p-lenovo-a1000-g-indian-version-hard-t3630644
but closed the others. Please do not make any more duplicates
Sawdoctor
Reposting it here, since this is the Lenovo sub-forums. Probably may find more help here.
I was using the Allegro ROM for the A1000G and it was running fine and dandy without any problems. Last night I tried installing a game and after I restarted it, it didn't turn on. I thought that maybe the device had low battery or something. So I plugged it in and let it charge for an hour and it still didn't turn on. Than I let it charge overnight and in the morning, it still doesn't turn on. So I tried to flash the Stock ROM for Lenovo a1000g and I got an error saying the storage was different or something - Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182) [Edit - Tried to find the error, this is the one]
It was probably because the Allegro ROM was installed before it stopped working. So after that failed attempt at Flashing the Stock ROM - I don't get the battery indicator anymore and no matter what I try inside SP Flash Tool, it doesn't detect the device and the flashing process doesn't work. I tried installing and uninstalling all the MTK and Mediatek drivers but still not working. It shows up as MediaTek DA USB VCOM (Android) but it doesn't disappear, unless I remove the usb cable.
Before when I flashed the Allegro ROM and as seen across other youtube tutorials and guide, the device would show up for 2-4 seconds before disappearing and the SP Flash Tool would start working. Now it is just blank and the MediaTek DA USB VCOM (Android) doesn't go, no matter what.
Please, I would appreciate help. Since I don't have much knowledge regarding this. What must I do? I am depending on you guys.
~Aaron.
Bump. Please someone help.
So yeah, I screw up by a lot, but let's see if someone can help me/
I tried to update twrp on my phone and it got bricked, ADB was not seeing the device but Mi FlashTool was with a code but not COM, tried changing the phone drivers brom 900E to QL8000 and it got registered by MiFlashtool as COM and another code, the phone was still showing there even if I could not make the phone go to fastboot mode, just blackscreen; I tried to reinstall stock rom with it but got stuck at "flashing", disconnected the phone, the phone was still bricked in a black screen, when trying to reconnect the phone again to the pc, Win10 now displays an error
https://imgur.com/a/VS1yh6t
,
https://imgur.com/a/4PxUD7E
, I already tried uninstalling the device, deleting and reinstalling the drivers (unable because for some reason they won't appear now, but already tried installing the from their 1st party and prom MiFlashTool), so the phone won't turn on, display anything, go into recovery/fastboot, and I don't know what to do now, is the phone lost? I hope you can help me with this issue.
Hello Bro. Try install latest Mi Flash Tool latest version and then install the drivers. For my it's works in windows 10.