Hello friends,
I need help, I'm desperate.
My K3 note died for no reason, I was using it hung up and now will not turn over. When I turn on the charger it does not appear any LED on the phone
I was one month using a custom rom, and he was with root and TWRP Recovery.
I installed MTK SP FlashTools, downloaded the Stock ROM VIBEUI 6.0 and try to make the flash'm finding the following error: Error Brom: S_storage_not_match (3182). Already tried other Stock Roms and all have the same error.
What can I do my friends? I lost cell phone?
Thank you
That error means the tool detects a mismatch between rom and phone. Are you using the latest usb drivers? The com port on the lower right looks different. Usually it says preloader instead of MTK port. Try uninstalling the usb drivers and use a different one. Also, change the Firmware Upgrade option to Download Only. One other thing, try with another rom file, possibly and older version rom first and see if it works. Changing the usb cable and port used won't hurt either.
If nothing works, your phone's EMMC might be dead..
How recover emmc for lenovo k3 note
try this its work for me
in sp flash tool try delete all+dowmload option in the firmware upload its work but after this you will lost your imei and original mac address. after this youy need to recover imei but if you don't know your mac address you can't change your mac addresss. its change every time when you on your wifi.
Related
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
I'm not a robot
Funtast said:
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
Click to expand...
Click to collapse
hi funtast
just to ask if your recovery stock or something better than default Chinese recovery also are you using a virgin branded ZTE blade l2 thanks in advance add I take time before I flash any new phone thanks again
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
MAXMICK69 said:
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
Click to expand...
Click to collapse
PUNCTUATION!!!!!! This is illegible!
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
Reposting it here, since this is the Lenovo sub-forums. Probably may find more help here.
I was using the Allegro ROM for the A1000G and it was running fine and dandy without any problems. Last night I tried installing a game and after I restarted it, it didn't turn on. I thought that maybe the device had low battery or something. So I plugged it in and let it charge for an hour and it still didn't turn on. Than I let it charge overnight and in the morning, it still doesn't turn on. So I tried to flash the Stock ROM for Lenovo a1000g and I got an error saying the storage was different or something - Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182) [Edit - Tried to find the error, this is the one]
It was probably because the Allegro ROM was installed before it stopped working. So after that failed attempt at Flashing the Stock ROM - I don't get the battery indicator anymore and no matter what I try inside SP Flash Tool, it doesn't detect the device and the flashing process doesn't work. I tried installing and uninstalling all the MTK and Mediatek drivers but still not working. It shows up as MediaTek DA USB VCOM (Android) but it doesn't disappear, unless I remove the usb cable.
Before when I flashed the Allegro ROM and as seen across other youtube tutorials and guide, the device would show up for 2-4 seconds before disappearing and the SP Flash Tool would start working. Now it is just blank and the MediaTek DA USB VCOM (Android) doesn't go, no matter what.
Please, I would appreciate help. Since I don't have much knowledge regarding this. What must I do? I am depending on you guys.
~Aaron.
Bump. Please someone help.
Hello! all. Im really nervous. THis never happened before, i dont know what to do. I was using an Custom Rom Miui Eu. And i decided today to went back to the official one for good. And when i was flashing the firmware in Miflash, the phone never reboot and MiFlash showed as "Flash Complete" in green color, so i removed the usb and the went all black and there is no way tu turn on the picture, i cant go to bootloader or fastboot. When i connect the phone to the PC. My PC recognize the phone as Qualcom 9008. But i cant flash and do anything. What can i do? i tried replacing the auth .elf file but im still having the error in MiFlash. The only way to fix this brick is doing that "test point" thing ?
First download the latest firmware and the correct one (global, chinese or whatever you had) for your device because you can only install higher version firmware using flash tool.
It seems your phone already is in EDL mode, hence there is no need for test point method.
Try another usb port. Try using a different PC. Change the location of the firmware folder to a shorter path like C:\ and try to reboot the phone a few times and then try.
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.