Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
I'm not a robot
Funtast said:
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
Click to expand...
Click to collapse
hi funtast
just to ask if your recovery stock or something better than default Chinese recovery also are you using a virgin branded ZTE blade l2 thanks in advance add I take time before I flash any new phone thanks again
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
MAXMICK69 said:
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
Click to expand...
Click to collapse
PUNCTUATION!!!!!! This is illegible!
Related
TL;DR Rooted my LG Optimus l7 (P705g), installed CM10, didn't work that well, tried to flash the stock rom onto my phone and now my phone is bricked! Please help!
Yesterday I flashed V20A_00.KDZ onto my phone, and I successfully managed to root my phone and install the official jellybean release, but it was slow and I didn't like it that much. So I decided to install CM10 onto my phone with Rom Manager and Clockwork Mod, and it bricked my phone. I flashed the V20A_00 back onto my phone and it worked. I tried to install CM10 again, and this time it worked. However it couldn't recognize my SIM card or something, and I couldn't connect to any mobile network. So I tried to flash V20A_00 onto my phone again except it didn't work and now my phone is bricked. I have tried to flash it like 10 times and it never works, it just gets stuck at the boot animation. I am using KDZ_FW_UPD to flash the roms, and I have ran in administrator, put my phone into emergency mode, set type to 3GQCT and phone mode to EMERGENCY. I have tried to flash V10E_00 onto my phone as well but it won't work. Please help, I really really really need my phone. If I haven't provided enough info, I can provide more
JonXDAaccount said:
TL;DR Rooted my LG Optimus l7 (P705g), installed CM10, didn't work that well, tried to flash the stock rom onto my phone and now my phone is bricked! Please help!
Yesterday I flashed V20A_00.KDZ onto my phone, and I successfully managed to root my phone and install the official jellybean release, but it was slow and I didn't like it that much. So I decided to install CM10 onto my phone with Rom Manager and Clockwork Mod, and it bricked my phone. I flashed the V20A_00 back onto my phone and it worked. I tried to install CM10 again, and this time it worked. However it couldn't recognize my SIM card or something, and I couldn't connect to any mobile network. So I tried to flash V20A_00 onto my phone again except it didn't work and now my phone is bricked. I have tried to flash it like 10 times and it never works, it just gets stuck at the boot animation. I am using KDZ_FW_UPD to flash the roms, and I have ran in administrator, put my phone into emergency mode, set type to 3GQCT and phone mode to EMERGENCY. I have tried to flash V10E_00 onto my phone as well but it won't work. Please help, I really really really need my phone. If I haven't provided enough info, I can provide more
Click to expand...
Click to collapse
Use adb from computer and flash ROM over hopefully it will show device connected to windows computer hope you have used ASB and downloaded drivers and did a backup.
culaterout said:
Use adb from computer and flash ROM over hopefully it will show device connected to windows computer hope you have used ASB and downloaded drivers and did a backup.
Click to expand...
Click to collapse
Could you explain how to flash a ROM over it with adb, I've used it before but only for unlocking the bootloader. Also I have a backup, but would I have to turn it into a zip? And what is ASB?
Hi everyone, I'm sorry if I am posting at wrong place but I need your help !
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok !
but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked :crying:
could someone PLEASE help me ?
this kind of thing never has happened with me before :crying:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
not work :/
davidequiz said:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
Click to expand...
Click to collapse
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
felipemichelr said:
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
Click to expand...
Click to collapse
The battery not empty?
Try charging the battery use ebc...
the battery is full charged !
glori2 said:
The battery not empty?
Try charging the battery use ebc...
Click to expand...
Click to collapse
see friend, the problem isn't with the battery, I've tried many others ...
the real reason is 'cause I hit format device and it has formatted all partitions from the phone ...
does anyone know how to fix ?
My stock recovery won't load. Any suggestions?
Sent from my BLU STUDIO 5.0 using Tapatalk
stock ROM
I have never been able to find a stock ROM for Blu devices. I tried finding one for my Blu Studio 5.5s and Bluproducts Support says you must mail your phone to the repair center, that they will not supply ROMs for their phones. Sad situation.
Also it's too late to warn you but anytime you connect a USB device that is known to work, even a little bit, when WIndows says that something needs formatting, NEVER do it, it usually means that there is a problem communicating that Windows believes is an unformatted memory card. This is hardly ever the case.
I guess we are on our own with these Blu phones until either they either take off in popularity and we see more recovery tools or they quite making them and after we have bricked them all due to lack of recovery tools.
Blu Factory Default Recovery for BLU 5.0 2/ 5.5s
Hello BLU User of 5.0 2/ 5.5s
Okay the first thing I will say " DO NOT..... I REPEAT.... DO NOT USE ANY Version OF AIO FLASHER "
because the program is a real B.S flasher.... 1. it hangs like crazy
2. their is no progress bar/ status bar
3. the only real thing that works is backup
4. all partition on drive is NOT PROTECTED
Meaning all partition will be erased if you f-up
hit yes when you should have press NO..
now with all that said both phone are great 5.0 2/ 5.5s
I Already Brick the crap out of Blu 5.0 2, Now I have the Blu 5.5s
All I want to do is Drop CWM on it..... to no avail..
I Can tell you this....... I manage to f-up the stock default recovery
so now there is no default recovery for on a brand new phone
I got it rooted no prob... all of my backup come without default
recovery..
the Question is how can i recreate the default recovery partition
on main system memory card or would it be possible to create that
partition on my 64G SDCARD Via the Computer ?
Edit:
Fixed: Reflash Preloader / EMI from original ROM - Boot into Factory menu (Not Recovery) Turn off the phone.
Start SPFlashTool - Select Scatter.txt (Make sure its Scatter from the Original ROM) - Flash Original FULL Rom - Reflash Boot/Recovery/Pre Entire ROM -
Adb Install Update
Done!
---------------------------
I have managed to brick the Blu Studio X today using SPFlashTool.
EMI Obtain DRAM Fail.
This started when I replaced Factory recovery with CWM which turned out to be even worst than Factory. I got it Rooted without issue but in an effort to Flash back to Stock Recovery, I was unsuccessful.
The phone is detected by the PC now but I cannot do anything. The battery is integrated also.
What I need is the entire Blu Stock ROM including the Preloader. Without this, I cannot Unbrick it. Any help or ideas would be great.
Very urgent please, how do I get into bootloader (factory menu) without going through recovery? My D830u is in a Blu logo boot loop without recovery or anything. I need fastboot mode
i tried to upgrade the rom to a newer version and in the process i ereased everything
now when i turn on the phone it stucks in the LG logo and thats it
and the pc cant recognize the phone
the download mode works so as the recovery mode
how can i fix this i need my phone
@darksnail2 I'm thinking you tried to flash the newer version of a custom rom, is that it? If you have custom recovery installed, then you can enter recovery by pressing the hardware button combo & flash the older working ROM by choosing it from your SD card.
raravi said:
@darksnail2 I'm thinking you tried to flash the newer version of a custom rom, is that it? If you have custom recovery installed, then you can enter recovery by pressing the hardware button combo & flash the older working ROM by choosing it from your SD card.
Click to expand...
Click to collapse
i cant find in the sd card
what should i do ? to make my pc recognize my phone ?
darksnail2 said:
i cant find in the sd card
what should i do ? to make my pc recognize my phone ?
Click to expand...
Click to collapse
To start, you need to say what ROM it is including the version you were on, and the version you updated to. Without that, no one can help your specific situation.
Sent from my LG-LS980 using Tapatalk
gonk24 said:
To start, you need to say what ROM it is including the version you were on, and the version you updated to. Without that, no one can help your specific situation.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
i had CM 10 kit kat
tried to upgrade it to a newer stable version and it made me problems
pop up messages like Unfortunately messaging has stopped so i figure i should install a newer Gapp and it didnt work
and then i made a factory reset by a mistake and now it is bricked
i tried to follow this tutorial
http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
and i am stuck in the third step when i type fastboot erase aboot in the cmd
it just says "waiting for device" and thats it
somehow i cant make the phone connect to the pc ! any solution ?
anyone ?> need ur help
Did you try putting the phone into download mode, connecting to LG Mobile Support Tool program, and do an upgrade recovery?
audit13 said:
Did you try putting the phone into download mode, connecting to LG Mobile Support Tool program, and do an upgrade recovery?
Click to expand...
Click to collapse
cant dunno why
Which part of the process doesn't work?
Hi guys.
Recently I managed to brick and then succesfully unbrick my LG g2 d802 using SRK tool. After that the phone wasn't recognized by PC anymore. Nevertheless, I bricked it once more by mistake and I managed to unbrick it using SRK tool. What was weird was that using the tool I could write the .img files to the corresponding partitions, but after I unbrick the phone, install ANY ROM whatsoever, the phone isn't recognized by PC anymore.
In device manager I can see LGE Modem and LGE Port, but no Phone Drive in My Computer. Can't flash the stock anymore because of that, and I'd really want to go back to stock...
Another issue I'm facing is with the lockscreen on any ROMs based on Stock, every time I restart the phone the lockscreen resets to NONE.
With any custom ROM installed the Virtual Navigation Keys are not shown until I edit the build.prop
Not to mention the LEDs are either not working or staying on any time I unlock the screen,
Anyone with the same problems here?
AndrewGliga said:
Hi guys.
Recently I managed to brick and then succesfully unbrick my LG g2 d802 using SRK tool. After that the phone wasn't recognized by PC anymore. Nevertheless, I bricked it once more by mistake and I managed to unbrick it using SRK tool. What was weird was that using the tool I could write the .img files to the corresponding partitions, but after I unbrick the phone, install ANY ROM whatsoever, the phone isn't recognized by PC anymore.
In device manager I can see LGE Modem and LGE Port, but no Phone Drive in My Computer. Can't flash the stock anymore because of that, and I'd really want to go back to stock...
Another issue I'm facing is with the lockscreen on any ROMs based on Stock, every time I restart the phone the lockscreen resets to NONE.
With any custom ROM installed the Virtual Navigation Keys are not shown until I edit the build.prop
Not to mention the LEDs are either not working or staying on any time I unlock the screen,
Anyone with the same problems here?
Click to expand...
Click to collapse
try another computer to see if phone its recognized.. why not go back to stock using TOT method.
raptorddd said:
try another computer to see if phone its recognized.. why not go back to stock using TOT method.
Click to expand...
Click to collapse
Thank you for your reply.
It was impossible for me to go back to stock with TOT method, but yesterday I fixed the phone after 6 months.
For a weird reason the download mode was broken, LG Flash TOOL was always giving an error. After I flashed SRK's Stock flashable ROM the download mode started to work again (might be a coincidence).
I managed to install the latest KDZ available for d802 (with CSE Flash, from LG Flash TOOL) and finally got the phone fully working, stock version, all functionality is back.
Thank you again for your reply.
Hi Guys,
I would greatly appreciate any help. I have somehow lost the TWRP & Stock recovery to my ZTE ANXON 7 MINI.
I had a custom rom and decided to flash a stock update zip and that rendered my phone unusable. I have managed to get it too boot to 6.0.1 B9 Spanish rom. However i have NO RECOVERY to flash the original update for the UK B12 Rom.
Im using the EDL Tool to flash. If anyone has the stock recovery to the B9 6.0.1 Rom that would be a big help. Or a EDL full backup.
All links to the ZTE website are down as they are no longer allowed to use ANDROID.
Also to note i have tried to reinstall TWRP however im left with either a white screen or nothing just bootloop.
Unable to unlock bootloader also as i have no fastboot option as recovery is dead
Thanks.
This are (full flash)EDL roms(need to extract to folder "flash\full ",and flash(not recovery ))B12.6Android.EDL.EU.Version
B13.Android7.EDL.EU.Version
A18xcn said:
Hi Guys,
I would greatly appreciate any help. I have somehow lost the TWRP & Stock recovery to my ZTE ANXON 7 MINI.
I had a custom rom and decided to flash a stock update zip and that rendered my phone unusable. I have managed to get it too boot to 6.0.1 B9 Spanish rom. However i have NO RECOVERY to flash the original update for the UK B12 Rom.
Im using the EDL Tool to flash. If anyone has the stock recovery to the B9 6.0.1 Rom that would be a big help. Or a EDL full backup.
All links to the ZTE website are down as they are no longer allowed to use ANDROID.
Also to note i have tried to reinstall TWRP however im left with either a white screen or nothing just bootloop.
Unable to unlock bootloader also as i have no fastboot option as recovery is dead
Thanks.
Click to expand...
Click to collapse
If you have white screen or ZTE logo then I know how to solve it.
Funny enough, hook the phone to the pc, open adb command and type adb devices.
You will see you pc recognises the phone in adb as recovery.
If this happens let me know and I'll show you how to push the entire bootstack to data/media, then write all these files to each partition. After that your twrp will work and you are done.
These happened to me about 10 times now and I even created a bat file which I double click and it does all the operations at once then reboots straight into twrp. Quite cool actually.
Nevertheless I'm also interested in an edl ROM to umbrick another axon 7 mini I have which is totally, utterly bricked.
I have opened the phone (still opened) and I managed once to get the test point to work and connect to qcn configurator but since then I never got it to be recognised again.
Good luck
Cheers
bius88 said:
This are (full flash)EDL roms(need to extract to folder "flash\full ",and flash(not recovery ))B12.6Android.EDL.EU.Version
B13.Android7.EDL.EU.Version
Click to expand...
Click to collapse
Mate, you don't know how helpful this post was.
I have bricked this [nasty] phone about 10 times.
but yesterday I learn yet another lesson, after trying to flash a new splash screen, the phone went totally dead, connecting directly in DFU mode.
I sort of panicked because I didn't have a fresh data backup and there aren't full EDL ROM for this phone easily found on the web.
After focusing in making sure my laptop had the correct drivers (loader/bulk/adb) and after I got confident to use the deepflash cable to move from DFU to EDL, bulk device recognised, right click on it and update the driver to show the loader (901D) then I though what would be the next step.
I did not understand the MIflash tool and the version I had didn't seem to work at all I scratched my had for a while.
I then used the EDL tool, placed your files into the FULL folder and ran through the steps...….mate.....that was beautiful.
I ended up flashing the full B13 on top of the B09 and the system works perfect without any loss of data.
Having learnt all this, I went brave and confident I could rescue my other axon 7 min, which had been dead for over 2 months. Although I had to open it to access the test point, after about 50 or more attempts, I had tried lots of combinations, test point again etc.
It turned out I have left the phone plugged in to the PC with every plug disconnected except the usb board and went to do the washing up. 2-3min later my pc gave a sound, loader 901D was already ready and I repeated the exact process.
You basically saved both of my phones!!!! THANK YOU