HI all i wouldnt say im a noob have been flashing roms for years, i wanted to flash BTU firmware on the s7 edge all worked fine but no updates and i seen o2 have been rolling out updates monthly so wanted to go back to the o2u rom only thing is when i flash it i get the German rom with VIA and not o2u as well as all the bloat! ANY ONE ANY IDEA WHY IM GETTING VIA AND NOT O2U and it is the o2u firmware i have downloaded it twice from diffrent sites any help guys ????
Post results from *#1234# and also the link to firmware.
http://www.sammobile.com/firmwares/download/71125/G935FXXU1APDH_G935FTEF1APC2_O2U/
this is the link to the firmware i downloaded as well as
http://stockroms.net/file/GalaxyS7Edge/6.0.1/UnitedKingdom/O2/G935FXXU1APD1_G935FTEF1APC2_O2U.zip
AP: G935FXXU1APDH
CP: G935FXXU1APD1
CSC: G935FTEF1APC2
Model: SM-G935F
What i use to have but now it shows VIA and germany ???
Related
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
i think it means that firmware is not compatible ,but i may be wrong
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
I started a simlar thread a few days back asking similar question. I am trying to flash ROM from different region and without success. so far no one has replied a way to do it. I have Vodafone ROM on my N9005 and I have managed to flash it with BTU ROM but not TGY ROM. Apparently any european ROM I can probably flash but not asia. So you is the other way round.
Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
juzzy16 said:
Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
Click to expand...
Click to collapse
1. The CSC appears close to ur firmware in Kies 3. Like in the 1st pic the CSC is XEU.
2. I9505XXUENAA no is an official update recognized by Kies how u can see in the 2nd pic. Kies 3 recognize that u have the latest update installed. If you want update ur phone by Kies you will have to wait new official update or u will have to use ODIN for install I9505XXUENAA otherways (SamMobile).
I tried that csc the other night, and it loads the Austria/Switzerland stuff on my phone by default......very useful here in the uk.
There is option to select uk/btu but it resets the phone, so Im not spending 3 hours setting up my phone.
Oh, and the mobile data speed seems so crap on that modem compared to mk9....
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
juzzy16 said:
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
Click to expand...
Click to collapse
Yes normally.
- Branded phones have to have custom firmware (coz they install their own apps/mods/rebuilts)
- Unbranded handsets can apply new firmware as soon as Samsung releases it (without changes).
Hi...as the title says: Is it possible?
So to flash BTU and after it the CSC for my provider (it's from a MM Firmware)?
Tried the search function but couldn't find a statement.
it works, mine has xeu csc and I have flashed btu without a problem
Yeah...I'm also on BTU now. But I wanted to know if I could flash a 6.0.1 CSC now without problems.
yes, tested by me, downgrade is safe because bootloader binary is the same
Thanks!
@Pet1981 hey there? did you try to flash the marshmallow CSC? I'm thinking of doing so since Samsung Pay has been rolled out in my home country but I'm currently in Switzerland, using the BTU nougat update
Yep! Works without problems
Tried the MM csc for T-Mobile Germany (DTM) in Renovate 7.1.0 (Nougat) and it doesn't work properly, needed to switch back to the german unbranded csc (DBT)
Hi I am using Note 4 N910F and I installed custom ROMs and flash my kernel and modem also but I forgot what was my stock ROM and kernel and modem and my oculus for gear VR no more works now and after searching about I found that I need my stock ROM kernel modem to make my gear VR work again please guide where do I find my custom rom and hard and posting images of my phone info please help and sorry for noob question
just goto sammobile, dl latest fw for ur phone model(whats printed under battery) and carrier, flash w/odin, then factory reset w/stock recovery
vincom said:
just goto sammobile, dl latest fw for ur phone model(whats printed under battery) and carrier, flash w/odin, then factory reset w/stock recovery
Click to expand...
Click to collapse
Looks like my phone is n910f and is from UK .am I right?
Also on sammobile I found united Kingdom EE, H3G,VODAFONE ETC.
One is plane only united Kingdom and I assume it should be mine
Please anyone confirm
Can I download it from Samsung firmware.Org as server is down today at sammobile
Also I am confused what is my firmware as united Kingdom has
BTU
VOD
O2U
H3G
EVR
What is mine here
nicholes said:
Can I download it from Samsung firmware.Org as server is down today at sammobile
Also I am confused what is my firmware as united Kingdom has
BTU
VOD
O2U
H3G
EVR
What is mine here
Click to expand...
Click to collapse
idk about .org
try to match fw w/ur carrier, what is ur carrier or the phones original carrier/country ? those 3 letters match up to a specific carrier.
not that critical as all are almost exactly if not all the same fw, bloatware will be installed as to ur phones carrier csc
Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Opening the stock recovery completes the CSC installation, give that a try. It's expected to show "Updating 0-100%".
jereyeap said:
Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Click to expand...
Click to collapse
So, I have done some digging around the internet and found this link from the Sammobile forum. I've tried the methods in that forum, and it works!
If any of you have suffered the same problem as me, you could perform troubleshoot using this method. It seems that firmware for XME is actually multi-CSC and includes other CSC such as Vietnam, Thailand, Singapore, Myanmar and etc.. The Vietnam CSC is the default CSC.
So, here you go. This is the link: https://www.sammobile.com/forum/threads/39155-How-to-change-CSC-with-a-combination-file