Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
i think it means that firmware is not compatible ,but i may be wrong
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
I started a simlar thread a few days back asking similar question. I am trying to flash ROM from different region and without success. so far no one has replied a way to do it. I have Vodafone ROM on my N9005 and I have managed to flash it with BTU ROM but not TGY ROM. Apparently any european ROM I can probably flash but not asia. So you is the other way round.
Related
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
jeezy85 said:
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
Click to expand...
Click to collapse
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
weasley said:
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
Click to expand...
Click to collapse
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
toker_X1 said:
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
Click to expand...
Click to collapse
BUMP
any luck anyone? still getin ext4 error
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Click to expand...
Click to collapse
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
perosredo said:
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
Click to expand...
Click to collapse
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
ultramag69 said:
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
Click to expand...
Click to collapse
How did you flash it to void warranty?
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
Stay away from Kingo/vroot, xda has removed all links and closed the thread. It's full of malware / spyware and will send all personal details to a Chinese Web server.
Sent from my SM-N9005 using Tapatalk
ultramag69 said:
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
this was my original PTN Firmware
ap= n9005xxubmj3
cp=n9005xxubmj2
csc=n9005phnbmj3
if just flashed it, with odin to the udmj7 firmware
ap= n9005xxudmj7
cp=n9005xxubmj2
csc=n9005oxadmj4
so far so good !! , still no random reboots ( i had before with the ubmj3 firmware )
Click to expand...
Click to collapse
just changed my firmware from xme to btu
just follow these from the s4 forum by kaushalls but use odin 3.04 and be patient it may fail for two time but will eventually will do it and run odin in normal mode not administrator mode
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via back up and reset option
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
and restart (go into recovery and see the csc btu being applied if yes then stop here,do factory reset and restart)
after this the next steps are optional
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
check csc by going to stock recoverry it will show manual mode at the bottom and then show btu csc applied
i am now on xxumdj6
Hi Guys and Gurls,
I have an international version of Note 3 PDA: MI7 Phone: MI5 CSC: MI7 (TGY).
It fails to update after reboot from OTA saying to use Kies, Kies fails saying unknown error, the update available is PDA: MK1 Phone: MJ9 CSC: MK1 (TGY).
I have another note 3 from france wich updated perfectly fine both brought from Kogan.
Does anyone have any idea or ideas on how to update? id sooner not flash but if i have to well i guess ill wait for 4.4.2
Any help will be greatly appreciated,
Your Unclebeavz
Bump
Sent from my SM-N9005 using XDA Premium 4 mobile app
Unclebeavz said:
Hi Guys and Gurls,
I have an international version of Note 3 PDA: MI7 Phone: MI5 CSC: MI7 (TGY).
It fails to update after reboot from OTA saying to use Kies, Kies fails saying unknown error, the update available is PDA: MK1 Phone: MJ9 CSC: MK1 (TGY).
I have another note 3 from france wich updated perfectly fine both brought from Kogan.
Does anyone have any idea or ideas on how to update? id sooner not flash but if i have to well i guess ill wait for 4.4.2
Any help will be greatly appreciated,
Your Unclebeavz
Click to expand...
Click to collapse
Sorry...can't help but just to confirm that i had the same problem. had bought note 3 from ebay from a Hong Kong based seller. Then rooted and updated to MK2... Just wanted to share... cheers.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
Hi,
What model of phone do you have? The LTE SM-N9005? If so (and I hope someone could either second this or correct me if i'm wrong) I believe you could flash via odin (and you do not need to be rooted to do this) the lollipop update that O2 has. 5.0 is available for the UK via the sammobile website, so if the basebands remain the same and the phone is the same model, I believe you could just download the 5.0 update from sammobile and flash it via odin.
Since you would be flashing an official version of sammy's rom, you won't need to be rooted, nor have a custom recovery.
Cheers
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
We need know your model and firmware that you are using. Install this APP and add some screenshots here.
reply
Ok phone model is SM-N9005 And firmware is N9005xxugng1
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
so, you are using the sm-n9005, and the firmware u have is the same one as the firmware that the 02 UK version runs in 4.4.2.
Unless I'm mistaken, and if anyone sees I am please correct me, you could flash the 5.0 version with odin for o2 UK. I don't see why it wouldn't work, since it seems you have the same phone and firmware currently in 4.4.2
cheers
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
Your device is using of UK (with CSC: BTU). It still without Lollipop update. I recommend don't flash via ODIN any firmware and wait for future updates (via OTA) if you aren't rooted.
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
You have
Model SM-N9005 Model name GALAXY Note 3 LTE Country United Kingdom Version Android 4.4.2 Changelist 1955971 Build date Mon, 28 Jul 2014 12:56:29 +0000 Product code BTU PDA N9005XXUGNG1 CSC N9005OXAGNJ3
BTU no current update and likely to skip to the next build of Android .
O2 UK firmware can be used on this phone flashed via Odin .
http://www.sammobile.com/firmwares/download/45137/N9005XXUGBOB6_N9005O2UGBOC1_O2U/
HI all i wouldnt say im a noob have been flashing roms for years, i wanted to flash BTU firmware on the s7 edge all worked fine but no updates and i seen o2 have been rolling out updates monthly so wanted to go back to the o2u rom only thing is when i flash it i get the German rom with VIA and not o2u as well as all the bloat! ANY ONE ANY IDEA WHY IM GETTING VIA AND NOT O2U and it is the o2u firmware i have downloaded it twice from diffrent sites any help guys ????
Post results from *#1234# and also the link to firmware.
http://www.sammobile.com/firmwares/download/71125/G935FXXU1APDH_G935FTEF1APC2_O2U/
this is the link to the firmware i downloaded as well as
http://stockroms.net/file/GalaxyS7Edge/6.0.1/UnitedKingdom/O2/G935FXXU1APD1_G935FTEF1APC2_O2U.zip
AP: G935FXXU1APDH
CP: G935FXXU1APD1
CSC: G935FTEF1APC2
Model: SM-G935F
What i use to have but now it shows VIA and germany ???
Hi guz,
I want to downgrade my NOTE 4 from 6.0.1 to 5.1.1. I googled it and did show one of the thread on this forum using ODIN method for that. My problem is to find the correct firmware version for note 4.
My device info is given below
Model Number: SM-N910F
Baseband version: N910FXXU1DPB1
Build Number: MMB29M.N910FXXU1DPE1
Please help me on finding the correct firmware or suggest me on identifying the possible versions.
Thank you.
Go to sammobile and find the last released 5.1.1 firmware for your device.
ithehappy said:
Go to sammobile and find the last released 5.1.1 firmware for your device.
Click to expand...
Click to collapse
Thank you for reply.
I have already checked sammobile, I did found some 5.1.1 firmware for note 4, my problem is I couldn't find any for my build. so my question is can I use any other similer version, if so what version?. Please be specific.
Thank you.
codejc said:
Thank you for reply.
I have already checked sammobile, I did found some 5.1.1 firmware for note 4, my problem is I couldn't find any for my build. so my question is can I use any other similer version, if so what version?. Please be specific.
Thank you.
Click to expand...
Click to collapse
Use any unbranded firmware mate, UK for example. By unbranded I mean try those which don't come with any carrier labelling, you know like O2 etc.
ithehappy said:
Use any unbranded firmware mate, UK for example. By unbranded I mean try those which don't come with any carrier labelling, you know like O2 etc.
Click to expand...
Click to collapse
I have downloaded the following build
Code:
Model: SM-N910F
Country: United Kingdom (EE)
Version: Android 5.1.1
Product code: EVR
PDA: N910FXXU1COI3
CSC: N910FEVR1COJ1
Will this work, mate?
codejc said:
I have downloaded the following build
Code:
Model: SM-N910F
Country: United Kingdom (EE)
Version: Android 5.1.1
Product code: EVR
PDA: N910FXXU1COI3
CSC: N910FEVR1COJ1
Will this work, mate?
Click to expand...
Click to collapse
Yes, unless EE is a carrier name it should be unbranded.
Installing the EE firmware will also install EE's own remote phone locking software in the persdata partition (Which is a real pain to remove as it will keep coming back even if you flash a non EE firmware) as well as EE's bloatware.
Use the BTU firmware for a clean unbranded phone.
Azriaphale said:
Installing the EE firmware will also install EE's own remote phone locking software in the persdata partition (Which is a real pain to remove as it will keep coming back even if you flash a non EE firmware) as well as EE's bloatware.
Use the BTU firmware for a clean unbranded phone.
Click to expand...
Click to collapse
Thank you for the valuable insight. Its a good thing since I have delayed the downgrade.
Downgrading on galaxy note 4
Hi....I just found your thread and wanted to know did the downgrade work in the end and what impact did it have on the phone. Did it improve? What were the reasons you decided to downgrade?
Thanks