Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
juzzy16 said:
Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
Click to expand...
Click to collapse
1. The CSC appears close to ur firmware in Kies 3. Like in the 1st pic the CSC is XEU.
2. I9505XXUENAA no is an official update recognized by Kies how u can see in the 2nd pic. Kies 3 recognize that u have the latest update installed. If you want update ur phone by Kies you will have to wait new official update or u will have to use ODIN for install I9505XXUENAA otherways (SamMobile).
I tried that csc the other night, and it loads the Austria/Switzerland stuff on my phone by default......very useful here in the uk.
There is option to select uk/btu but it resets the phone, so Im not spending 3 hours setting up my phone.
Oh, and the mobile data speed seems so crap on that modem compared to mk9....
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
juzzy16 said:
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
Click to expand...
Click to collapse
Yes normally.
- Branded phones have to have custom firmware (coz they install their own apps/mods/rebuilts)
- Unbranded handsets can apply new firmware as soon as Samsung releases it (without changes).
Related
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Meyhemg said:
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Click to expand...
Click to collapse
After flashing MJ5 you made root, right?
jaswinky said:
After flashing MJ5 you made root, right?
Click to expand...
Click to collapse
No, I didn't root it and didn't do anything. So why?
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I have the same, cant go back to XEF
a40 said:
I have the same, cant go back to XEF
Click to expand...
Click to collapse
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Meyhemg said:
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Click to expand...
Click to collapse
No we need same pda and csc...
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I mean, when I updated to JB4.3 from 4.2.2 and rooted my phone, The knox counter incresed to 0x1; this was the reason I allways have thought OTA and kies updates notifications will never work again.
Anyway, In my case I can no more update by OTA or kies because I rooted the phone in 4.3 (or better, because of the knox counter increasing), but for buckups and so on I can use it normally, except I had to download kies version 3, the only kies version compatible with S4 JB 4.3, maybe you still have kies version 2.
I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
http://forum.xda-developers.com/showthread.php?t=1704138
Your CSC is Korea CSC MK6 (KOR)
Pleas read the faqs and guides CSC etc .
231
JohnnyMug said:
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
Click to expand...
Click to collapse
use sammobile.com and flash chosen firmware for the UK via odin. After that check your csc.
And you should update to kies 3 to recognise your 4.3 rom
sent from sgs3 -stock 4.3 open europe rom
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1704138
Your CSC is Korea CSC MK6 (KOR)
Pleas read the faqs and guides CSC etc .
Click to expand...
Click to collapse
Hi the info about my current CSC is from the KIES when i connect my phone to the PC. Does it mean that my phones CSC is Korean or that the Firmware I currently is Korean?
I bought my phone in he UK so i think it should be BTU shouldn't it ?
Also uglyjohnny I have downloaded kies3 but I still get the same message about my firmware but thank you for help.
Also I have use sammobile.com to download my firmware and it was UK firmware i downloaded every time.
Pleas read the faqs and guides CSC etc .
Change CSC i believe is what you want not that i ever use Kies to be 100% .
Kies Emergency Recovery post may help.
http://forum.xda-developers.com/showthread.php?t=1978840
JohnnyMug said:
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
Click to expand...
Click to collapse
Hi i had the same issue and here is how i fixed it
1. Flash the 4.3 UK BTU firmware from sammobile using ODN
2.Root your phone using cf autoroot - Instructions http://www.theandroidsoul.com/samsung-galaxy-s3-root-tools-videos-guides-downloads/
3. Download CSC Changer from play store and change CSC on BTU
4.Download and install triangleaway app to reset flash counter - http://au.ibtimes.com/articles/4973...ung-galaxy-s3-gt-i9300-reset.htm#.Urj3D7Rn25h
5.Flash the 4.3 firmware again using ODIN
6.Now go into recovery mode and wipe cache and wipe factory data
Your phone will be unrooted and the CSC will match ( Credit goes to medi-927 who originally posted this guide)
Hello,
I have a Galaxy S4 with adroid 4.3 and CSC from NEE (Nordic Countries) but I'm living in Spain. I'm wondering if I'm going to get updates via OTA or Kies to 4.4.2. If I try to search for updates in Kies or OTA it says that I have the lastest firmware uptade.
Thanks you!
TehSebaXx said:
Hello,
I have a Galaxy S4 with adroid 4.3 and CSC from NEE (Nordic Countries) but I'm living in Spain. I'm wondering if I'm going to get updates via OTA or Kies to 4.4.2. If I try to search for updates in Kies or OTA it says that I have the lastest firmware uptade.
Thanks you!
Click to expand...
Click to collapse
Dial *#1234# and attach what appears here.
There you go.
TehSebaXx said:
There you go.
Click to expand...
Click to collapse
Problem is that you have wrong baseband for that OTA/KIES tell you have the latest updates.
Steps to follow:
1. Dont use Kies.
2. Use Kies 3 for know ur CSC. In your case its NEE (if its correct).
3. Go HERE for download the latest firmware for ur phone.
4. Flash it through ODIN.
5. When u finish the process of flashing and your system start again, dial *#1234# and have to appear this:
AP: I9505XXUFNB9
CP: I9505XXUFNB9
CSC: I9505NEEFNB2
6. Reflash the firmware if you dont have what appears in the step 5.
7. You will receive the OTA updates now. Good luck :highfive:
Ok thanks you very much!
Hello,
Yesterday I downloaded the Vodafone Italian Nougat firmware, flashed it and immediately as my S7E turned on I saw that the firmware was wrong.
In fact the firmware is from Germany No Brand, I already downloaded it again just to make sure that I didn't made any mistakes, flashed it again and I have the same problem.
Sammobile take up to 10 days to respond, So I'm asking if anyone else has this problem, or maybe can anyone upload the real Vodafone Italia Nougat firmware:
Model SM-G935F
Model name Galaxy S7 edge
Country Italy (Vodafone)
Version Android 7
Changelist 10422490
Build date Mon, 20 Feb 2017 06:27:00 +0000
Security Patch Level 2017-02-01
Product code OMN
PDA G935FXXU1DQBT
CSC G935FVFG1DQBT
Thanks everyone
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
edan1979 said:
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
Thanks, will download, flash and report back here
I downloaded that one myself some days ago and had no issues.
However, I am wondering why did you flash it if it was wrong. You can easily determine it by the filename.
Has your device been on OMN before?
andiling said:
I downloaded that one myself some days ago and had no issues.
However, I am wondering why did you flash it if it was wrong. You can easily determine it by the filename.
Has your device been on OMN before?
Click to expand...
Click to collapse
Yes mine is branded Vodafone, but I had the UK Nougat flashed, now I saw that finnaly Italian Vodafone Nougat became available I donwloaded it to flash, but the guys from sammobile made an mistake, yes the firmware is Vodafone, but it's germany not italy
It contains actually several countries but all are Vodafone branded.
Did you have a Vodafone Italy SIM inside when booting up for the first time?
edan1979 said:
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
Update.....Tried to flash it 2 times, but the same result, I dont know what's going on, I'm still on Germany Vodafone firmware.
Can anyone help please?
andiling said:
It contains actually several countries but all are Vodafone branded.
Did you have a Vodafone Italy SIM inside when booting up for the first time?
Click to expand...
Click to collapse
Yes ofcourse, I an prepaid Vodafone SIM installed. The phone was not bought under any contract with Vodafone
the firmware is multi csc files with Germany is the main CSC. we cannot do anything with it. The only way i know how to change the csc fully to your country is via Samsung Service Center or you need to root the device and do it with samsung phoneinfo apps. Root and you will loose samsung pay function/secure folder and any knox related software like shealth
Usually the CSC changes accordingly to the sim inserted. Only if there's no corresponding csc it takes the default one in multi csc roms.
Please download Phone INFO ★Samsung★ and posts screens here to see what's really going on.
Here's the screenshot
Anyone has an solution?
blackfire2802 said:
Anyone has an solution?
Click to expand...
Click to collapse
Flash your original marshmallow firmware using the CSC. It will factory reset your device
Flash the latest Nougat firmware using the HOME_CSC from your original firmware (can be the marshmallow one or if you have an Nougat one, use this). Don't use the nougat CSC file anymore.
Unfortunately without a Single CSC file you are not getting back to your original CSC and a single CSC has not been published for Vodafone Italy. In case of multi CSC the system uses the CSC already applied or in case of change (since you've BTU at the moment) the standard CSC which is VD2 (Vodafone Germany) in this case.
The only way to change that is with root.
andiling said:
Unfortunately without a Single CSC file you are not getting back to your original CSC and a single CSC has not been published for Vodafone Italy. In case of multi CSC the system uses the CSC already applied or in case of change (since you've BTU at the moment) the standard CSC which is VD2 (Vodafone Germany) in this case.
The only way to change that is with root.
Click to expand...
Click to collapse
I said using CSC meaning the firmware included all the stuff of your firmware.
Sent from my SM-G935F using XDA-Developers Legacy app
Unfortunately that won't help as there's no firmware which only includes Vodafone Italy. There's only one with several European Vodafone settings and if you flash that onto a device with non-Vodafone CSC such as BTU it used the standard CSC included which is Vodafone Germany. I thought first different, too, unfortunately there's no way without root (tested it by myself).
Rooting is out of picture, because I don't want to loose warranty.
I'll try to download and flash Vodafone Italy MM, then flash it, after I'll flash again the nougat with the old MM csc.
Edit: in this case I'll wait for a few weeks until Vodafone Italy will release the proper csc file.
Thanks