After trying to install b321 on L29 now my phone is just stuck on your device is booting. I can't get into fastboot by holding volume down and power. Please help
UnchartedRd said:
After trying to install b321 on L29 now my phone is just stuck on your device is booting. I can't get into fastboot by holding volume down and power. Please help
Click to expand...
Click to collapse
with your device plugged in ?
just turn off your phone after you press the volume down you connect the USB cable
Enviado desde mi HUAWEI NXT-L09 mediante Tapatalk
http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934/page8
Take a look here if any of the steps help.
Related
Hey guys ,
I tried to enter download mode today to revert to stock after flashing PA 3.99
but i get a black screen saying
"fastboot: processing commands"
Any ideas how to use kdz again?
Thanks:laugh:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
raul338 said:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
Click to expand...
Click to collapse
drkingtech said:
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
Click to expand...
Click to collapse
Tried both of them but I get fast boot rocessing commands in a black screen
P.s -i have an e612
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
drkingtech said:
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
Click to expand...
Click to collapse
I had seen that but its for a different device
Edit:it only shows how to flash a recovery
my recovery is intact and completely functional i dont know where the hell my download mode is ?!
Sent from my LG-E610 using Tapatalk 4
pls help me my p8 lite dont have bootloader mode.. i updated manualy to b311 any idea?
ngato35 said:
pls help me my p8 lite dont have bootloader mode.. i updated manualy to b311 any idea?
Click to expand...
Click to collapse
What do you mean......?????
Just plug your phone into PC and hold power and volume down button until Fastboot mode shows up
its working thank you <3
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Vermillion_PT.2 said:
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Click to expand...
Click to collapse
Try to power off your phone and press volver+, vol- and power at the same time until mi logo appears. Then release allí buttons
Enviado desde mi Redmi 4 mediante Tapatalk
Dang! I don't know why. But it's worked!!! Thanks man!!!!
hi guys, can you help me with my a1 phone since it cannot on after i succesfull install gcam. on the app state finalize and phone start to reboot then mi logo appear and turn off back. after that happen i plug out usb + power button and the phone appear mi logo then turn off. the computer does not recognize my phone when i connect to the usb port. can you give me solution how to use back my phone btw i use mi a1 android nougat 7.1.2
amirulsyafiqs said:
hi guys, can you help me with my a1 phone since it cannot on after i succesfull install gcam. on the app state finalize and phone start to reboot then mi logo appear and turn off back. after that happen i plug out usb + power button and the phone appear mi logo then turn off. the computer does not recognize my phone when i connect to the usb port. can you give me solution how to use back my phone btw i use mi a1 android nougat 7.1.2
Click to expand...
Click to collapse
can you enter to fastboot mode?,
volume down button and power at same time.
amirulsyafiqs said:
hi guys, can you help me with my a1 phone since it cannot on after i succesfull install gcam. on the app state finalize and phone start to reboot then mi logo appear and turn off back. after that happen i plug out usb + power button and the phone appear mi logo then turn off. the computer does not recognize my phone when i connect to the usb port. can you give me solution how to use back my phone btw i use mi a1 android nougat 7.1.2
Click to expand...
Click to collapse
First go in fastboot (by pressing volume down + power button)
*unlocked bootloader ( fastboot oem unlock)
*then flash fresh fastboot rom using mi flash tool
Now you will get your phone back
teacapan said:
can you enter to fastboot mode?,
volume down button and power at same time.
Click to expand...
Click to collapse
yes i can enter the fastboot
amirulsyafiqs said:
yes i can enter the fastboot
Click to expand...
Click to collapse
Then Check adb driver properly installed or not in ur pc
Mohit S said:
First go in fastboot (by pressing volume down + power button)
*unlocked bootloader ( fastboot oem unlock)
*then flash fresh fastboot rom using mi flash tool
Now you will get your phone back
Click to expand...
Click to collapse
can you tell me on more detail? or video tutorial since i cannot understand a little bit and also need to use internet during mi suite?
amirulsyafiqs said:
can you tell me on more detail? or video tutorial since i cannot understand a little bit and also need to use internet during mi suite?
Click to expand...
Click to collapse
Here the video tutorial
?
Mohit S said:
Here the video tutorial
Click to expand...
Click to collapse
are this can reset/format internal phone? means all data are lost?
amirulsyafiqs said:
are this can reset/format internal phone? means all data are lost?
Click to expand...
Click to collapse
No, select 2 option in mi flash tool nothing lost
*save user data option
See in attachment below?
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
shuvo_king said:
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
Click to expand...
Click to collapse
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Wolfcity said:
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Click to expand...
Click to collapse
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
shuvo_king said:
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
Click to expand...
Click to collapse
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Wolfcity said:
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Click to expand...
Click to collapse
mi tool 2 works only if its in fastboot mode.... I cant even get that far yet... just bootloop over and over again