no bootloader mode - P8lite Q&A, Help & Troubleshooting

pls help me my p8 lite dont have bootloader mode.. i updated manualy to b311 any idea?

ngato35 said:
pls help me my p8 lite dont have bootloader mode.. i updated manualy to b311 any idea?
Click to expand...
Click to collapse
What do you mean......?????
Just plug your phone into PC and hold power and volume down button until Fastboot mode shows up

its working thank you <3

Related

any one have a solution ?

i have install mod clock recovery to my phone
& it is ok but when i try with nofills
the phone restart & keep on the logo i try hardrest but it is fail
now i can enter the normal recovery
no official rom here ? and how can i flash it ?
or any easy solution ?
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
thank u it s work thank u
RSD LITE is not detecting phone
Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S
sunilkumar1 said:
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S
Click to expand...
Click to collapse
Hey Sunil!
It is Up Arrow key on d-pad and powerup key, it should take you to a black screen with white characters.
Try RSD 5.6 and be patient.
Regards
hsr
The X takes you to recovery and up arrow key to the bootloader
somewhere in africa

how to fix | Rescuse Mode Huawei P8 UL-10

Hello friends
Please help me..
I got through Kingoroot to root the phone,
But after mobile Restart stuck in this mode!(Rescuse )
What to do .. ????
Android firmware on the phone was b320 .
I downloaded the firmware and poured in memory but does not install .....( V+,V-,Power)
It is not clear at all and never off the phone!
Please check Quick Tips
Please advise your friends.
I want to open my phone bootloader.
But Product ID have problems in finding the phone is not loaded!( rescuse mode)
How do I know Product ID device?
helpppppp meeeeeeeeee
GRA-UL10
Y7L7N15918001899
868014027689951
Product ID?
help ...
help me.............
maxomid said:
help me.............
Click to expand...
Click to collapse
Try to keep Volume +, Volume -, Power pressed. this will get you to twrp.
You can restore from there.
ladodo said:
Try to keep Volume +, Volume -, Power pressed. this will get you to twrp.
You can restore from there.
Click to expand...
Click to collapse
hi
twrp Recovery????
my phone lock Bootloader ... i can flash fastboot TWRP Recovery????????
maxomid said:
hi
twrp Recovery????
my phone lock Bootloader ... i can flash fastboot TWRP Recovery????????
Click to expand...
Click to collapse
Sorry, I thought that you are stuck in rescue mode.
To unlock bootloader: link
Yes you can install twrp: link
ladodo said:
Sorry, I thought that you are stuck in rescue mode.
To unlock bootloader: link
Yes you can install twrp: link
Click to expand...
Click to collapse
Thank you dear friend..
Unfortunately I do not know how should I get Product ID ...
help me..
how to fix????
please guide me..
It is now two days the phone.
And does not help anyone.
I need to unlock the bootloader code or Product ID does anyone find for me ????
Product: HUAWEI GRA-L10 (P8 64GB)
SN: Y7L7N15918001899
IMEI1:868014027689951
IMEI2:868014027709965
Product ID?????????
Unlock Code ?????????
don't worry, it might not be easy to fix but it is definetly not impossible, if you fill correctly with your phone details you will get your code, beware of recovery though.. i had the same issue you had, to successfully enter recovery you must hold power and volume up buttons until the phone restarts, wait for the huawei logo to appear, then wait !!6-8 more seconds!! before releasing the buttons, once you're in recovery you can flash firmware from dload folder on sdcard or wipe/install rom if you're on twrp
thanks fix by DC Phoenix

Huawei P8 black screen , no ADB no recovery

Please help me , I updated my Huawei P8 gra-ul00 but using firmware from ( gra-ul21 ) and now it is totally OFF , even when I connect it to charger no led will be turn on , and when I connect it to PC I hear beep in my PC but the phone is OFF and no response!
Note: I tried Power button + volume buttons multiple times but no success ! :/
Sorry for my bad English .
I appreciate your response ..
saeed.sys said:
Please help me , I updated my Huawei P8 gra-ul00 but using firmware from ( gra-ul21 ) and now it is totally OFF , even when I connect it to charger no led will be turn on , and when I connect it to PC I hear beep in my PC but the phone is OFF and no response!
Note: I tried Power button + volume buttons multiple times but no success ! :/
Sorry for my bad English .
I appreciate your response ..
Click to expand...
Click to collapse
Test by pressing the volume down button and connect it to the pc, it will enter fastboot mode and you will be able to flash boot, system, cust and recovery and recover your device
lespaul79 said:
Test by pressing the volume down button and connect it to the pc, it will enter fastboot mode and you will be able to flash boot, system, cust and recovery and recover your device
Click to expand...
Click to collapse
Thanks for your reply lespaul79 , but you mean only pressing Volume Down ? I tried and nothing happen the screen still Black and after applying any fastboot command it shown " Waiting for the device " message ! .
Any other suggestion ?
saeed.sys said:
Thanks for your reply lespaul79 , but you mean only pressing Volume Down ? I tried and nothing happen the screen still Black and after applying any fastboot command it shown " Waiting for the device " message ! .
Any other suggestion ?
Click to expand...
Click to collapse
Press volume down without releasing connect to pc, do not release volume down until bootloader mode appears on the screen

(help im willing to pay ) huawei p10 plus brick

guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Eyezcripz said:
guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
Click to expand...
Click to collapse
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Mohamed Hasan said:
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Click to expand...
Click to collapse
can u help me step by step . please help me I'm tired and cannot sleep
skiswim said:
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Click to expand...
Click to collapse
yes me too I don't know how to put the UPDATE.app in SD card becouse its bigger than 4gb (fat32) any tricks or solution how to put in sdcard(fat32)
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Gamkutopolowk said:
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Click to expand...
Click to collapse
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
rommco05 said:
try dc phoenix is tool for unbricking huawei phones but u must pay for this tool
Click to expand...
Click to collapse
i try but after i go that site they not answering me via live support contact
Eyezcripz said:
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
Click to expand...
Click to collapse
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Gamkutopolowk said:
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Click to expand...
Click to collapse
I think not open bcouse I trying to install twrp ,, always failed.
how what the command .
Rommco05 said:
plug phone to PC and turn off phone. Turn on with holding vol down+power button, now u will boot to fastboot
Click to expand...
Click to collapse
i mean what the code to check my phone info
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
Eyezcripz said:
i mean what the code to check my phone info
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.
Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.
Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
i try buf my twrp is gone.. sir i doing that all time to try.. but always in "HUAWEI ERECOVERY"
i dont know what happen i know i have twrp .but after use this command "fastboot oem relock (my unlock code)" my phone is reboot and thats all ..always in ****ing HUAWEI ERECOVERY i try to open my phone by clicking power +vol up .to pen in twrp recover but always in HUAWEI ERECOVERY.. i dont know what happen to my phone...
in my FASTBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
rommco05 said:
i this situation you cant do anything. Your choice is only dc phoenix
Click to expand...
Click to collapse
if you help me step by step i try .
rommco05 said:
i never try this tool, make a quick search on google.
1.you can not lock the bootloader when you have a twrp installed this is big mistake.
Click to expand...
Click to collapse
yea i know thats why my phone like this now
Rommco05 said:
Believe me if u have locked FRP and u cannot boot to system u hace just 3 choices: 1. DC Phoenix 2. FunkyHuawei 3.Service center
Click to expand...
Click to collapse
yea my brother talk me to go huawei center you think how many days to repair my phone ? or only hour?
Rommco05 said:
I don't know. Anyway u have locked bootloader so u can use warranty! I have phone in service 3 days for replace screen
Click to expand...
Click to collapse
im lock bootloader but i already unlock this. by using adb
my problem is after relock my oem my phone is reboot after my phone is always in HUAWEI ERECOVERY

Super Bricked!!! Huawei P9 lite VNS-L31. Locked bootloader, no manufacturing mode...

Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
zgfg said:
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
Click to expand...
Click to collapse
Moved from P9 forum.
Mike
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
tried unlock service? I recommend this.
RyotaGamer said:
tried unlock service? I recommend
Click to expand...
Click to collapse
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
michel_duenas said:
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
Click to expand...
Click to collapse
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
RyotaGamer said:
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
Click to expand...
Click to collapse
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
michel_duenas said:
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
Click to expand...
Click to collapse
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
RyotaGamer said:
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
Click to expand...
Click to collapse
1- No, I don't have bootloader unlock code.
2- In fastboot mode it appears to unlock FRP and unlock bootloader ... but when trying commands from fastboot mode I get an error: FAILED (remote: command not allowed). I found the phone with the fastboot devices command. The mobile shows on the fastboot screen that Phone unlocked but I sincerely believe (by not admitting any code for fastboot) that the bootloader is locked.
3- The Huawei logo lasts forever ... until it has finished with the battery capacity. And I can not charge the battery because whenever I put the USB charger the phone is fixed and stays in the Huawei logo for centuries and centuries.
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
5- In fastboot mode, it launched the "fastboot restart recovery" command but does not restart in recovery mode, it restarts but shows the Huawei logo. Tried the command "fastboot flash recovery recovery.img (TWRP)" but it does not flash and throws the FAILED error (remote: command not allowed)
6- All the commands and tests I do without SD card and without SIM card
7- Tried by pressing the power button 10 seconds (9 seconds, 15 seconds, 30 seconds, 5 seconds .... etc) There is no way always fix showing the Huawei logo and it does not leave there. Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Thank you for your interest. But I'm still trying to find a solution.
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
michel_duenas said:
2- In fastboot mode it appears to unlock FRP and unlock bootloader
Click to expand...
Click to collapse
how did you unlock without code?
michel_duenas said:
Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Click to expand...
Click to collapse
you can't boot recovery while charging.
michel_duenas said:
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
Click to expand...
Click to collapse
yes. it is final option.
btw, did you flashed oeminfo before?
RyotaGamer said:
how did you unlock without code?
No, no, nooooo ... it's not unlocked. Apparently it is unlocked (it shows it like this) but when entering the codes by fastboot it does not admit them and the error that I told you comes out
you can't boot recovery while charging.
While charging I can't do anything. No recovery, no flash (3 buttons)., No boot ... ONLY fastboot
yes. it is final option.
Ok, I guessed it ... and I don't rule it out given the case I'm in.
btw, did you flashed oeminfo before?
Click to expand...
Click to collapse
The steps I have flaseado have been ROM for the three buttons and dload folder on SD card from here:
1- HUAWEI P9 LITE ROLLBACK PACKAGE (VNS-L31, FROM ANDROID 7.0 EMUI 5.0 TO ANDROID 6.0 EMUI 4.1, C900B300, ENGLISH)
2- VNS-L31C432B210-FULL, Region - Europe, State - Official, Type EMUI 4.1.3 Android 6
3- VNS-L31C432B371-FULL, Region - Europe, State - Official, Type EMUI 5.0 Android 7- Full Firmware
4- SUPER BRICKKK !!
PS I don't know anything about oeminfo, as such I haven't flattered any of this ... but I don't know anymore
michel_duenas said:
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
Click to expand...
Click to collapse
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
RyotaGamer said:
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
Click to expand...
Click to collapse
Thank you for everything and sorry for the inconvenience ..... I don't know if someone else offers me any more solution if I'm not forced to DC-Phoenix
did you find solution? i'm in the same boat and can't get unlock code. I don't mind paying for it even. Huawei F'ed us all with their latest stunt

Categories

Resources