Related
If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.
1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader
Good Luck
Are you saying this is a solution for lollipop hardbricked devices?
sebastiandg7 said:
Are you saying this is a solution for lollipop hardbricked devices?
Click to expand...
Click to collapse
I'm saying that if you have a moto g that is connecting on Qhsusb Dload then you have a new option to try
Connecting trough usb without battery does not give any life on the screen... Just black..
dwensch said:
Connecting trough usb without battery does not give any life on the screen... Just black..
Click to expand...
Click to collapse
does your phone connect on qhsusb?, how your phone get on that mode?
Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?
I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery
abeloman said:
Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?
I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery
Click to expand...
Click to collapse
With twrp you can reboot to bootloader!
Sent from my XT1032 using Tapatalk
Xup8 said:
With twrp you can reboot to bootloader!
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)
abeloman said:
Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)
Click to expand...
Click to collapse
using adb on your pc
adb reboot-recovery
Before i even attempt to do it, how did you end up with QHS-USB mode in phone?
Was it because of bad OTA or something else?
does this work? can anyone confirm?
sebastiandg7 said:
Are you saying this is a solution for lollipop hardbricked devices?
Click to expand...
Click to collapse
Im pretty sure, this is no help for hardbricked phones. https://www.youtube.com/watch?v=qZhAabwi24M
In this video, he did the same, but it wont help, when you have a hardbrick
dwensch said:
Connecting trough usb without battery does not give any life on the screen... Just black..
Click to expand...
Click to collapse
just connect your mobile to wall charger...
---------- Post added at 07:39 AM ---------- Previous post was at 07:37 AM ----------
juancollado2003 said:
If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.
1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader
Good Luck
Click to expand...
Click to collapse
you are telling us that we can't flash blank because of this?
&
what is the bootloader version of your MOTO G aka Falcon ?
hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151
dragon218 said:
hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151
Click to expand...
Click to collapse
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.
robi10101298 said:
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.
Click to expand...
Click to collapse
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
i it possible to erase fastboot ??!!
dragon218 said:
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
Click to expand...
Click to collapse
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.
zgomot said:
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.
Click to expand...
Click to collapse
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?
dragon218 said:
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?
Click to expand...
Click to collapse
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk
Anonda said:
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
in 5 min i will send video i think i'm doing everything right
if u can look at it
http://sendvid.com/svihvenb
No compatible source was found this video
Sent from my NEM-L21 using Tapatalk
Anonda said:
No compatible source was found this video
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
try this from yt
https://youtu.be/K36zMsaP4As
try putting update.app file into dload folder on your sdcard and updating via three button method.
sirjohnrl said:
try putting update.app file into dload folder on your sdcard and updating via three button method.
Click to expand...
Click to collapse
Try with b130 and b161 for region c432 nothing happened. 2 days ago i change region from c185 to c432 now i think maybe i need to past c185b161 to work ?
update doesn't start either, losing hope some one have any other ideas ?
dragon218 said:
try this from yt
https://youtu.be/K36zMsaP4As
Click to expand...
Click to collapse
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk
Anonda said:
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.
dragon218 said:
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.
Click to expand...
Click to collapse
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk
Anonda said:
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
When i start charge phone blinking red in led, after while phone vibe 1 time and go to booting now, but led don't stop blinking. I will try to charge it, but because of working screen, phone heat a lot i don't wanna burn it.
Before i made rollback and something gone very bad, emui update after 100 % phone don't boot up. Without usb cable i wasn't able to go recovery or fastboot. So i think i don't have any recovery i made backup of files with twrp but now i can't flash it.
after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?
dragon218 said:
after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?
Click to expand...
Click to collapse
I have the same situation. I tried everything, Three button method, letting the battery run out completely, Vol+ and Power, Vol- and Power, connected to PC, not connected to PC. Every time I disconnect the charger, and reconnect it starts from 0. I read some other people here have the same problem. Send it to warranty and explain your rollback process unlocked the bootloader somehow (I mean the phone does do a lot of sh*ty sh*t, so this shouldn't seem very odd as well!!!) and hope that you get a repair/replacement and after that sell it on ebay hoping some stupid people like us in the first place will buy it and spend your money on a phone more reliable!
I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.
bahador_b_92 said:
I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.
Click to expand...
Click to collapse
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk
Anonda said:
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
Yes. I am actually writing this from my Huawei P9 Lite now. This phone is really a nightmare for modifying and customization. I'm not sure if I'm going to resell it or just wait a reasonable amount of time until some reviews from the next update come out and see if I might wanna take the risk and update my phone again.
Hi
i bought before 2 weeks Xiaomi a1
it wored very good.
Today while I wanted to turn on the screen it did not respond.
The phone is not responding to any type of pressing.
I must say that the phone is new, did not get any kind of hit , and 5 min before this problem it used to work really good.
I think that the phone is in brick mode, and i can't enter to fastboot option because the phone is not responding....
Pls help my solve this problem.
Thanks
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Has that still not been fixed with November update? I turned my ambient screen back on to see. So far, 2 days since update and no black screen after notification.
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
micleftic said:
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Click to expand...
Click to collapse
I cant even turn on the screen...
It's not showing any thing on the screen.
I tried to push the power but there is no respond
myself379 said:
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
Click to expand...
Click to collapse
I tried forcing it. But it is still show black screen.
I think it is in brick mode
roy123456 said:
I tried forcing it. But it is still show black screen.
I think it is in brick mode
Click to expand...
Click to collapse
Just go in fastboot mode and reflash the firmware from MIUI.con
jack_21 said:
Just go in fastboot mode and reflash the firmware from MIUI.con
Click to expand...
Click to collapse
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
roy123456 said:
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
Click to expand...
Click to collapse
You must keep pressed vol down + power until the phone does show "FASTBOOT"
jack_21 said:
You must keep pressed vol down + power until the phone does show "FASTBOOT"
Click to expand...
Click to collapse
How long?
I tried it for 3 min ...
Is it enough?
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
Well there is something strange.
Leave the phone discharge
Then let it charge
Then power on with vol down + power
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
What can I do if it is a hard brick?
roy123456 said:
What can I do if it is a hard brick?
Click to expand...
Click to collapse
Visit customer care(they will probably say motherboard problem as always) or try qfil method which is quite complex if this flashing things are new to you.
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
you should press the power key while charging cable connected.If it doesn't work , unplug the charging usb and plug again reverse(type c's reversibility).If it can't, try with another AC source,another person,another location.
My A1 reborn by my gf's charging adaptor,hand and location.(she know nothing about android hard key combination)
Just thinking,don't know exactly.Sorry for my english.
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
ruhi maallivk said:
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
Click to expand...
Click to collapse
reflash phone with stock firmware in fastboot mode on MI FLASH TOOL
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You switched off the phone in middle of installing ota, best bet is take it to the take it to the service center and tell them phone not switching back on after installing August ota update.
Or if not in warranty then try to install stock rom using qfil.
Unfortunately you have bricked your Mi A1
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You have bricked your Mi A1, when you turned it off while installing/flashing the August update. Basically you should never turn a smartphone off, or disconnect the USB cable (if it is connected), while flashing its ROM.
There are various methods to unbrick it, I suggest you try this one since it's apparently not going into fast boot:
[Experimental]Recover Hard Bricked Xiaomi A1 Using SD Card
Hi, I'm using Nokia 6 ( TA 1000) mobile with Playstore ( i purchased it local mobile shop and they said it's with Play-store. but i haven't received any update from 2017- April security update.
so i found some ways to manual update (https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441) and i followed some steps form Xda forum. finally i got oreo update, but my mobile model change to TA-2025 and sounds/camera quality dropped. ( sound looks like mono speaker)
then i tired to go back to old model using OSTLA_v6.1.2.zip
but unfortunately mobile goes to download mode and now it's not turn on or turn off. (display on until battey low )
"Powered by android - download mode" test only in background
Is there a way to fix this issue ? i didn't found any place to fix i
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
hawwin88 said:
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
Click to expand...
Click to collapse
but phone is stuck in the download mode. is there a way to get back to recovery mode ?
Press power switch long?
Mikelsson70 said:
Press power switch long?
Click to expand...
Click to collapse
restarting & once again download mood
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
is there a way to use any online tool to flash it ?
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
hawwin88 said:
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
Click to expand...
Click to collapse
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
emmazz said:
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Click to expand...
Click to collapse
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Mikelsson70 said:
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Click to expand...
Click to collapse
Thank you so much, i'll try :crying:
emmazz said:
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
Click to expand...
Click to collapse
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
hawwin88 said:
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
Click to expand...
Click to collapse
mobile restarting and getting "usb detect" sound in PC continues. it's not stop until unplug
Hey guys, Nokia 6 mobile handover to the small repair shop in the town and, now Mobile is working fine, with the TA-1021 and i have updated to Android 9. (may 1, 2019 Security update.)
but now sounds are very loud and it's very annoying. i don't know what happened. but sound quality dropped to very low. and also Mobile camara quality also like VGA camara.
is there a way to fix this issue ? or restore to the original TA-1000 version. :crying: :crying: :crying:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
frnsl3 said:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
Click to expand...
Click to collapse
is there a way to check "bootloader unlock" ?
emmazz said:
is there a way to check "bootloader unlock" ?
Click to expand...
Click to collapse
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
frnsl3 said:
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
Click to expand...
Click to collapse
hmm. only powered by android logo, and then nokia Logo.
is there any tutorials to unclock this bootloader ? my mobile is Nokia 6, TA 1000 ( but current firmware is TA-1021 - android 9 latest update) i want to go back to TA- 1000 or TA 1003 (happy to use android 9 with ta 1000 or ta 1003)
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
shuvo_king said:
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
Click to expand...
Click to collapse
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Wolfcity said:
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Click to expand...
Click to collapse
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
shuvo_king said:
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
Click to expand...
Click to collapse
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Wolfcity said:
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Click to expand...
Click to collapse
mi tool 2 works only if its in fastboot mode.... I cant even get that far yet... just bootloop over and over again