Hey guys is there a way to make headset volume louder on i9301i ?
Use PowerAMP and play with the equaliser
I wuould use Viper.
Custom roms that include ViperAudio mod have higher volume due the better audio processing without distorting audio.
I don't know if it is easy to install Viper Aduio to Stock rom but you should look at it.
Hexen Is Alive said:
I wuould use Viper.
Custom roms that include ViperAudio mod have higher volume due the better audio processing without distorting audio.
I don't know if it is easy to install Viper Aduio to Stock rom but you should look at it.
Click to expand...
Click to collapse
Yup, viper is great. It's easy to install, just install the app, install the drivers, disable seandroid and reboot. I used xposed and the wanam xposed module to disable seandroid, I don't know if there's a better way to do that.
StillNoName said:
Yup, viper is great. It's easy to install, just install the app, install the drivers, disable seandroid and reboot. I used xposed and the wanam xposed module to disable seandroid, I don't know if there's a better way to do that.
Click to expand...
Click to collapse
SWEET.
Ive tried to install Viper on stock ROM but it failed. Ive used DSP+ for KitKat but i will try your method!
Try to edit mixer_paths and install v4a. My device with denon headset just rocks! The dac in i930i is awesome!
Related
tested and working on my e6553
http://forum.xda-developers.com/xpe...und-mod-v2-0-z5-stereo-sony-settings-t3405501
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
GryTEcHoG said:
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
Click to expand...
Click to collapse
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
zemetal said:
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
Click to expand...
Click to collapse
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
GryTEcHoG said:
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
Click to expand...
Click to collapse
hhmmm i am using this also, since the one that i linked have a microphone issue on the z3+, i dont really know how to unable those, since that in the zip file, there are no such "apps" apart from v4a for effects and a customized sound enhancement app.
How did you root your Z4 on Android 6.0.1 ??
y9420045825 said:
How did you root your Z4 on Android 6.0.1 ??
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915
http://forum.xda-developers.com/xperia-z4/help/how-to-root-xperia-z3-t3356864
Note: I Haven't developed this, I just found this and thought it would help if I shared it......
I've noticed there isn't a thread for ViPER4Android on the Stock ROM........... Installing ViPER4Android on custom ROMs like CM, AOKP, AICP, Turbo, etc. is really easy. Whereas installing it on a Stock ROM is really difficult....
So here are the steps on how to do so:
1. Wipe Cache & Dalvik in recovery
2. Then install the 4 zips in the given order.
3. Wipe Cache & Dalvik again
4. Reboot
5. Then install the update apk, SELinux Mode Changer and busybox installer apks
6. Set SELinux to Permissive and install busybox
7. Install the drivers through the ViPER4android app and reboot
8. Make sure SELinux is Premissive
9. Profit$$$$$
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
nguyenquangduc2000 said:
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
Click to expand...
Click to collapse
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
ayush rao said:
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
Click to expand...
Click to collapse
I am using chriszuma kernel with dolby atmos. All work well
I don't know if you guys know about the project A.R.I.S.E (Link- http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709/), it's probably the best thing to happen to android.
You should definitely check it out. And it's totally compatible with stock 6.0.
V4A and Atoms works wonderfully together. It's like sounds you've never heard before. :good:
Maybe I'm exaggerating.
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
still_living said:
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
Click to expand...
Click to collapse
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Choose an username... said:
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Click to expand...
Click to collapse
Thanks dude, I think I'll try another Rom with full wipe.
still_living said:
Thanks dude, I think I'll try another Rom with full wipe.
Click to expand...
Click to collapse
Just some advice: I think the best rom is NucleaROM, but it was where I had the problem. Also don't try to install Pure Nexus, don't know if it's fixed but it bricked your phone horribly
Didn't try this with renovate Ice 5.0 but with 4.0 when I installed Viper4Arise (I belive that's the name) I got no sounds from my speakers. Tried it a few times all the same result.
Just want to know the steps to take so I can get better sound on my phone, or if Viper4android works?
Thanks.
adz3d said:
Didn't try this with renovate Ice 5.0 but with 4.0 when I installed Viper4Arise (I belive that's the name) I got no sounds from my speakers. Tried it a few times all the same result.
Just want to know the steps to take so I can get better sound on my phone, or if Viper4android works?
Thanks.
Click to expand...
Click to collapse
Check viper4android threads and renovate thread. There are people with the same issue you, use the search you will find some info. I have viper working flawless on stock rooted.
adz3d said:
Didn't try this with renovate Ice 5.0 but with 4.0 when I installed Viper4Arise (I belive that's the name) I got no sounds from my speakers. Tried it a few times all the same result.
Just want to know the steps to take so I can get better sound on my phone, or if Viper4android works?
Thanks.
Click to expand...
Click to collapse
callumbr1 said:
Check viper4android threads and renovate thread. There are people with the same issue you, use the search you will find some info. I have viper working flawless on stock rooted.
Click to expand...
Click to collapse
To quote my response, hope this helps:
Ok here's what I did:
- make sure any previous version of Viper is removed (I had an issue where I'd installed a version over another and it messed my sound up in that even on the lowest volume step it was playing full volume!). I used one of the viper with the aroma and chose uninstall. Then I used Titanium Backup to search for viper and removed another that way.
- flash this version:
https://www.androidfilehost.com/?fid=817550096634776829
- if you don't have the Viper app appear then flash an apk of one. I used the pure black from from here (open up the zip and I used the 2.5.0.5 version):
https://drive.google.com/file/d/0B6OgctcRCMJvdUpSTnZYazhpM2s/view
I'm not sure if I'm just being picky, but I swear that this sound doesn't sound as good as previous setups. Though this is the first version that just works - as previously I needed to use compatibility mode for Spotify and to avoid issues, such as when I would play via Spotify, then load Poweramp whilst playing, it would silence Spotify resulting in me needing to kill both apps in order to resume audio.
Good luck!
cd993 said:
To quote my response, hope this helps:
Ok here's what I did:
- make sure any previous version of Viper is removed (I had an issue where I'd installed a version over another and it messed my sound up in that even on the lowest volume step it was playing full volume!). I used one of the viper with the aroma and chose uninstall. Then I used Titanium Backup to search for viper and removed another that way.
- flash this version:
https://www.androidfilehost.com/?fid=817550096634776829
- if you don't have the Viper app appear then flash an apk of one. I used the pure black from from here (open up the zip and I used the 2.5.0.5 version):
https://drive.google.com/file/d/0B6OgctcRCMJvdUpSTnZYazhpM2s/view
I'm not sure if I'm just being picky, but I swear that this sound doesn't sound as good as previous setups. Though this is the first version that just works - as previously I needed to use compatibility mode for Spotify and to avoid issues, such as when I would play via Spotify, then load Poweramp whilst playing, it would silence Spotify resulting in me needing to kill both apps in order to resume audio.
Good luck!
Click to expand...
Click to collapse
Im having this issue as well. Had viper4android on my s7 edge and it was much louder with alot more bass. Very disappointing. Cant figure out why its not as loud as the s7 edge. Any tips on how to boost volume. I'm connecting to Bluetooth in my car on a s8 plus.
Hi guys I'm on fulmics 4.2, i didn't install V4A through aroma. When I go in the fulmics Tweaks I notice no difference in the audio processing whatever audio setting I choose in the Music section.
I was thinking on installing an audio mod as the Sauron's one or the A.R.I.S.E. project.
Which is your experience? Which is your headphones audio config?
Brutale1090! said:
I guys I'm on fulmics 4.2, i didn't install V4A through aroma. When I go in the fulmics Tweaks I notice no difference in the audio processing whatever audio setting I choose in the Music section.
I was thinking on installing an audio mod as the Sauron's one or the A.R.I.S.E. project.
Which is your experience? Which is your headphones audio config?
Click to expand...
Click to collapse
Up
Arise + V4A with Yamaha EPH-100
dirac=true
qc.effects=DAP
ICEsound=true
use.ICEconfig=4
use.ICEsound.preset=08