Note: I Haven't developed this, I just found this and thought it would help if I shared it......
I've noticed there isn't a thread for ViPER4Android on the Stock ROM........... Installing ViPER4Android on custom ROMs like CM, AOKP, AICP, Turbo, etc. is really easy. Whereas installing it on a Stock ROM is really difficult....
So here are the steps on how to do so:
1. Wipe Cache & Dalvik in recovery
2. Then install the 4 zips in the given order.
3. Wipe Cache & Dalvik again
4. Reboot
5. Then install the update apk, SELinux Mode Changer and busybox installer apks
6. Set SELinux to Permissive and install busybox
7. Install the drivers through the ViPER4android app and reboot
8. Make sure SELinux is Premissive
9. Profit$$$$$
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
nguyenquangduc2000 said:
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
Click to expand...
Click to collapse
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
ayush rao said:
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
Click to expand...
Click to collapse
I am using chriszuma kernel with dolby atmos. All work well
I don't know if you guys know about the project A.R.I.S.E (Link- http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709/), it's probably the best thing to happen to android.
You should definitely check it out. And it's totally compatible with stock 6.0.
V4A and Atoms works wonderfully together. It's like sounds you've never heard before. :good:
Maybe I'm exaggerating.
Related
Hey guys is there a way to make headset volume louder on i9301i ?
Use PowerAMP and play with the equaliser
I wuould use Viper.
Custom roms that include ViperAudio mod have higher volume due the better audio processing without distorting audio.
I don't know if it is easy to install Viper Aduio to Stock rom but you should look at it.
Hexen Is Alive said:
I wuould use Viper.
Custom roms that include ViperAudio mod have higher volume due the better audio processing without distorting audio.
I don't know if it is easy to install Viper Aduio to Stock rom but you should look at it.
Click to expand...
Click to collapse
Yup, viper is great. It's easy to install, just install the app, install the drivers, disable seandroid and reboot. I used xposed and the wanam xposed module to disable seandroid, I don't know if there's a better way to do that.
StillNoName said:
Yup, viper is great. It's easy to install, just install the app, install the drivers, disable seandroid and reboot. I used xposed and the wanam xposed module to disable seandroid, I don't know if there's a better way to do that.
Click to expand...
Click to collapse
SWEET.
Ive tried to install Viper on stock ROM but it failed. Ive used DSP+ for KitKat but i will try your method!
Try to edit mixer_paths and install v4a. My device with denon headset just rocks! The dac in i930i is awesome!
tested and working on my e6553
http://forum.xda-developers.com/xpe...und-mod-v2-0-z5-stereo-sony-settings-t3405501
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
GryTEcHoG said:
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
Click to expand...
Click to collapse
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
zemetal said:
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
Click to expand...
Click to collapse
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
GryTEcHoG said:
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
Click to expand...
Click to collapse
hhmmm i am using this also, since the one that i linked have a microphone issue on the z3+, i dont really know how to unable those, since that in the zip file, there are no such "apps" apart from v4a for effects and a customized sound enhancement app.
How did you root your Z4 on Android 6.0.1 ??
y9420045825 said:
How did you root your Z4 on Android 6.0.1 ??
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915
http://forum.xda-developers.com/xperia-z4/help/how-to-root-xperia-z3-t3356864
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
still_living said:
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
Click to expand...
Click to collapse
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Choose an username... said:
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Click to expand...
Click to collapse
Thanks dude, I think I'll try another Rom with full wipe.
still_living said:
Thanks dude, I think I'll try another Rom with full wipe.
Click to expand...
Click to collapse
Just some advice: I think the best rom is NucleaROM, but it was where I had the problem. Also don't try to install Pure Nexus, don't know if it's fixed but it bricked your phone horribly
Can anyone suggest a working audio mod for the latest stock update ..I tried magisk ..it didn't work ..if there is any mod working ..please provide the link
Thanks
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
moonlightdrive said:
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
Click to expand...
Click to collapse
Dolby atmos on magisk ??or the flash able zip??and thanks for the reply mate
venkatkrishna_s said:
Dolby atmos on magisk ??or the flash able zip??and thanks for the reply mate
Click to expand...
Click to collapse
No problem, here you have.:good:
moonlightdrive said:
No problem, here you have.:good:
Click to expand...
Click to collapse
Thanks!!
moonlightdrive said:
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
Click to expand...
Click to collapse
Viper4Android needs SE Linux Permissive app and set to Permissive
HueyT said:
Viper4Android needs SE Linux Permissive app and set to Permissive
Click to expand...
Click to collapse
Yes, sure. I always tried using The SElinux Toggler. But it didn't make any difference, it only happens to me on stock rom, in other roms i just use the ViperFX Magisk Module and works perfectly.
You have been able to get v4a audio processing working in the stock moto's rom?
Thanks in advance.
Can one still pass SafetyNet after flashing Dolby Atmos sound mod?
baunthiyal said:
Can one still pass SafetyNet after flashing Dolby Atmos sound mod?
Click to expand...
Click to collapse
Yes. Flash the one that i posted here, Safety passed.
Has anyone been able to successfully upgrade to Magisk 17.1 on the latest stock nougat ROM?
Even after the 17.1 Hotfix I still bootloop back into recovery; I've attempted to use the uninstaller first and same result.
Any idea ?
Same here unfortunately
I have this issue too
Anyone aware on how to assist the developer in diagnosing the issue. Seems like no other manufacturers are having the issue with the update.
I have no problem with Magisk 17.1 - but then again I use AOKP - custom roms do not have the problem!
Geez - I dont know how you can use stock - it is useless in comparison to AOKP / Lineage
No custom ROMs have their own set of issues. The best compromise for my usecase was to remain on the latest stock and make all the modifications I required myself.
Are the custom ROMs still on nougat?
Issues ? I don't have any - none ! I use AOKP and it gets updated every week and also gets the monthly security updates - Stock does not.
I have dolby atmos, substratum,magisk and pure freedom.
Oreo is being developed by tdm at the moment - hopefully it will be released soon but I am not holding my breath and am more than happy with what I have right now.
Which version do you guys use prior to 17.1?
16.7
k500zm said:
Issues ? I don't have any - none ! I use AOKP and it gets updated every week and also gets the monthly security updates - Stock does not.
I have dolby atmos, substratum,magisk and pure freedom.
Oreo is being developed by tdm at the moment - hopefully it will be released soon but I am not holding my breath and am more than happy with what I have right now.
Click to expand...
Click to collapse
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
countercharge said:
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
Click to expand...
Click to collapse
Go to this post and click on the link and download ViperAtmos 5.5 Sony Beats Edition and flash in twrp
https://forum.xda-developers.com/axo...4#post75053804
k500zm said:
Go to this post and click on the link and download ViperAtmos 5.5 Sony Beats Edition and flash in twrp
https://forum.xda-developers.com/axo...4#post75053804
Click to expand...
Click to collapse
Your link doesn't work. Gonna try to find it on my own but if you can post it I'd appreciate it and so would anyone else who finds this thread.
countercharge said:
Your link doesn't work. Gonna try to find it on my own but if you can post it I'd appreciate it and so would anyone else who finds this thread.
Click to expand...
Click to collapse
There is a whole thread about this in the ZTE AXON 7 MINI THEMES, APPS, AND MODS section below are you just to lazy to look ????
https://forum.xda-developers.com/axon-7-mini/themes/zte-axon-7-mini-lineage-os-dolby-atmos-t3746487
There is the correct link in my post there for viper and atoms !
k500zm said:
There is a whole thread about this in the ZTE AXON 7 MINI THEMES, APPS, AND MODS section below are you just to lazy to look ????
https://forum.xda-developers.com/axon-7-mini/themes/zte-axon-7-mini-lineage-os-dolby-atmos-t3746487
There is the correct link in my post there for viper and atoms !
Click to expand...
Click to collapse
Like I said, your link didn't work, I did search and it lead me to this thread:
https://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Sorry.
countercharge said:
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
Click to expand...
Click to collapse
countercharge,
You need to perform a fresh install of AOKP. These are k500zm's suggested steps:
Wipe system, data, cache, dalvik
Install AOKP rom; get if from http://xfer.aokp.co/?developer=AOKP&folder=tulip
Install unsu to get rid of Supersu.
Install ViperAtmos 5.5 Sony Beats Edition
Install Magisk
Install gapps
Reboot
Delete "audiofx" and "cyanogen audio" services using sdmaidpro or titanium pro
If you want, install Sony Music player from Magisk app
I am attaching the unsu and ViperAtmos files.
Regards
can someone please try this on his tulip https://forum.xda-developers.com/trek-2/themes/sound-mod-dolby-audio-t3835114
just because tulip and jasmine are very similar
please let me know if it works
I have seen a solution for this problem in 4pda forum if someone got this problem maybe they can look at there.
LeonardoGC said:
countercharge,
You need to perform a fresh install of AOKP. These are k500zm's suggested steps:
Wipe system, data, cache, dalvik
Install AOKP rom; get if from http://xfer.aokp.co/?developer=AOKP&folder=tulip
Install unsu to get rid of Supersu.
Install ViperAtmos 5.5 Sony Beats Edition
Install Magisk
Install gapps
Reboot
Delete "audiofx" and "cyanogen audio" services using sdmaidpro or titanium pro
If you want, install Sony Music player from Magisk app
I am attaching the unsu and ViperAtmos files.
Regards
Click to expand...
Click to collapse
So I finally got around to flashing everything tonight, and unfortunately it doesn't seem that dolby atmos or viper4android are working. They're both installed, but they have no effect on the audio and changing/enabling any of the settings doesn't seem to do anything whatsoever to the sound. I also can't seem to remove audiofx with titanium backup pro. Not sure what I did wrong or how to fix it. Any ideas?
Magisk on the latest stock nougat ROM?
RFrancis said:
Has anyone been able to successfully upgrade to Magisk 17.1 [from working 16.7] on the latest stock nougat ROM?
Click to expand...
Click to collapse
I tried to flash Magisk 17.3 and 18.1 without success on the B15 stock firmware. Had to flash back to the noverity B15 kernel to boot up the stock firmware again.
Magisk 16.7 is working! :good: https://github.com/topjohnwu/Magisk/releases/tag/v16.7
SGH-i200 said:
I tried to flash Magisk 17.3 and 18.1 without success on the B15 stock firmware. Had to flash back to the noverity B15 kernel to boot up the stock firmware again.
Magisk 16.7 is working! :good: https://github.com/topjohnwu/Magisk/releases/tag/v16.7
Click to expand...
Click to collapse
It was. Now although security net passes, Google pay stopped working for ever.....and unless there is a way to make magisk 18.1, working on stock, which to me in unheard of, we stock users have to unroot or flash akop and go through the hustle of making sound work with Dolby.
Cheers