Dolby atmos for custom Rom - ZTE Axon 7 Questions & Answers

Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.

still_living said:
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
Click to expand...
Click to collapse
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.

Choose an username... said:
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Click to expand...
Click to collapse
Thanks dude, I think I'll try another Rom with full wipe.

still_living said:
Thanks dude, I think I'll try another Rom with full wipe.
Click to expand...
Click to collapse
Just some advice: I think the best rom is NucleaROM, but it was where I had the problem. Also don't try to install Pure Nexus, don't know if it's fixed but it bricked your phone horribly

Related

Sound mod from z5 forum

tested and working on my e6553
http://forum.xda-developers.com/xpe...und-mod-v2-0-z5-stereo-sony-settings-t3405501
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
GryTEcHoG said:
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
Click to expand...
Click to collapse
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
zemetal said:
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
Click to expand...
Click to collapse
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
GryTEcHoG said:
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
Click to expand...
Click to collapse
hhmmm i am using this also, since the one that i linked have a microphone issue on the z3+, i dont really know how to unable those, since that in the zip file, there are no such "apps" apart from v4a for effects and a customized sound enhancement app.
How did you root your Z4 on Android 6.0.1 ??
y9420045825 said:
How did you root your Z4 on Android 6.0.1 ??
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915
http://forum.xda-developers.com/xperia-z4/help/how-to-root-xperia-z3-t3356864

ViPER4Android on Stock ROM (6.0)

Note: I Haven't developed this, I just found this and thought it would help if I shared it......
I've noticed there isn't a thread for ViPER4Android on the Stock ROM........... Installing ViPER4Android on custom ROMs like CM, AOKP, AICP, Turbo, etc. is really easy. Whereas installing it on a Stock ROM is really difficult....
So here are the steps on how to do so:
1. Wipe Cache & Dalvik in recovery
2. Then install the 4 zips in the given order.
3. Wipe Cache & Dalvik again
4. Reboot
5. Then install the update apk, SELinux Mode Changer and busybox installer apks
6. Set SELinux to Permissive and install busybox
7. Install the drivers through the ViPER4android app and reboot
8. Make sure SELinux is Premissive
9. Profit$$$$$
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
nguyenquangduc2000 said:
I think Dolby Atmos is better than viper4android. Because almost kernels for qualcomm soc support dolby sound
Click to expand...
Click to collapse
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
ayush rao said:
I personally use ViPER4Android cause I'm used to it and find it very easy to use (Like to improve bass).
Also I just couldn't get Dolby Atmos to work on the Stock ROM (6.0) running ur kernel
Click to expand...
Click to collapse
I am using chriszuma kernel with dolby atmos. All work well
I don't know if you guys know about the project A.R.I.S.E (Link- http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709/), it's probably the best thing to happen to android.
You should definitely check it out. And it's totally compatible with stock 6.0.
V4A and Atoms works wonderfully together. It's like sounds you've never heard before. :good:
Maybe I'm exaggerating.

Working audio mod

Can anyone suggest a working audio mod for the latest stock update ..I tried magisk ..it didn't work ..if there is any mod working ..please provide the link
Thanks
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
moonlightdrive said:
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
Click to expand...
Click to collapse
Dolby atmos on magisk ??or the flash able zip??and thanks for the reply mate
venkatkrishna_s said:
Dolby atmos on magisk ??or the flash able zip??and thanks for the reply mate
Click to expand...
Click to collapse
No problem, here you have.:good:
moonlightdrive said:
No problem, here you have.:good:
Click to expand...
Click to collapse
Thanks!!
moonlightdrive said:
Honestly this is the main reason to understand my "love and hate" relationship with the stock rom. It's great, in terms of performance is even better than any custom rom i've used, but i tried every single method to get ViperFX working here, and i couldn't, always shows 'Processing: no' in driver status.
Regarding to your question Dolby Atmos is working. but i personally think that it's nothing compared to ViperFX.
Click to expand...
Click to collapse
Viper4Android needs SE Linux Permissive app and set to Permissive
HueyT said:
Viper4Android needs SE Linux Permissive app and set to Permissive
Click to expand...
Click to collapse
Yes, sure. I always tried using The SElinux Toggler. But it didn't make any difference, it only happens to me on stock rom, in other roms i just use the ViperFX Magisk Module and works perfectly.
You have been able to get v4a audio processing working in the stock moto's rom?
Thanks in advance.
Can one still pass SafetyNet after flashing Dolby Atmos sound mod?
baunthiyal said:
Can one still pass SafetyNet after flashing Dolby Atmos sound mod?
Click to expand...
Click to collapse
Yes. Flash the one that i posted here, Safety passed.

Dolby Atmos Le Pro 3

Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
andrew2401 said:
Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
Click to expand...
Click to collapse
Try this one. Flash with twrp.
https://www.mediafire.com/file/i3pcs58sjmx334u/DolbyAtmos_Axon7_Oreo_20180202.zip
Sent from my LEX720 using xda premium
mchlbenner said:
Try this one. Flash with twrp.
https://www.mediafire.com/file/i3pcs58sjmx334u/DolbyAtmos_Axon7_Oreo_20180202.zip
Click to expand...
Click to collapse
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
andrew2401 said:
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
Click to expand...
Click to collapse
The different might be I use supsu not magisk.
Sent from my LEX720 using xda premium
andrew2401 said:
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
Click to expand...
Click to collapse
It works also with magisk.
Use Selinux Mode Changer and make your kernel permissive.
Uninstall or close every sound tuner what comes with the rom. Now flash Dolby Atmos and reboot. Sometimes it needs a second cold boot to come up.
Firmeware version?
It seems that this doesn't work for original Le Eco CDLA headphones. I have tried but can't notice any changes to sound quality.
atlas356 said:
It seems that this doesn't work for original Le Eco CDLA headphones. I have tried but can't notice any changes to sound quality.
Click to expand...
Click to collapse
It absolutely works with CDLA. Keep in mind that some program, such as Poweramp use their own internal EQ, compression and Reverb. Power amp will allow you to choose to use the systems DSP effects ( if you select the option in settings) while some audio players will not.
andrew2401 said:
Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
Click to expand...
Click to collapse
The reason why you see that message has to be with the android version (8.1) that you try to install. That mod would work fine with a previous android version like 7.1 (lineage 14.1 or backwards). See also developer specs for install.
The only way that you can get Dolby or Viper working with recent Oreo builds is to change SELinux to permissive. Then you can install whatever you want, then change SELinux back to Enforcing. I am on the current build of Lineage and ViperFX works just fine.

which dolby module to download

Hi,
Can anyone help me with which Dolby module to install on magisk for mi a1?
gunmanrishi said:
Hi,
Can anyone help me with which Dolby module to install on magisk for mi a1?
Click to expand...
Click to collapse
Dolby Atmos version Unity for stock rom
https://androidfilehost.com/?w=files&flid=247761
Standard version flash with twrp
https://androidfilehost.com/?fid=746010030569955178
Can I flash it with magisk
laugeek57 said:
Dolby Atmos version Unity for stock rom
https://androidfilehost.com/?w=files&flid=247761
Standard version flash with twrp
https://androidfilehost.com/?fid=746010030569955178
Click to expand...
Click to collapse
I did as u said. Now the app keeps force closing. And as I have installed it through twrp I can't get rid of it.
gunmanrishi said:
I did as u said. Now the app keeps force closing. And as I have installed it through twrp I can't get rid of it.
Click to expand...
Click to collapse
Bro you must have selinux permissive v.1.2 for stock rom
The dolby module appears in the modules of magisk just uninstall it by clicking on it and reboot
laugeek57 said:
Bro you must have selinux permissive v.1.2 for stock rom
The dolby module appears in the modules of magisk just uninstall it by clicking on it and reboot
Click to expand...
Click to collapse
I am on custom ROM. OK so how do I remove them now.
gunmanrishi said:
I am on custom ROM. OK so how do I remove them now.
Click to expand...
Click to collapse
Flash a Unity version it will detect that dolby is already installed and it will uninstall dolby ...
If you are on Rom custom Pixel Eperience is not compatible with Dolby Atmos for the moment ...
Old version Dolby Digital Plus fonctionne sur P.E
https://forum.xda-developers.com/showpost.php?p=76115041&postcount=875
https://forum.xda-developers.com/mi-a1/themes/8-0-dolby-atmos-axon-7-oreo-port-t3739009

Categories

Resources