Is there any A6000 plus driver for windows 10? Because I can't find any on google.
I need it because I've just wipe data, system, etc via TWRP and unfortunately my TWRP won't read any SD Cards. The only way is flash it via PC but ya, there's no A6000 plus driver for windows 10.
Please anyone help me, thanks!
vokkus kreatif said:
Is there any A6000 plus driver for windows 10? Because I can't find any on google.
I need it because I've just wipe data, system, etc via TWRP and unfortunately my TWRP won't read any SD Cards. The only way is flash it via PC but ya, there's no A6000 plus driver for windows 10.
Please anyone help me, thanks!
Click to expand...
Click to collapse
Try installing the drivers you have using "troubleshoot compatability" and choose the option that "it worked on earlier version of windows" and select win 7
Hope this helps
Just install any driver for Lenovo A6000 Plus....... it doesn't matter which version of Windows you're on. I have a laptop with Windows 10 & Lenovo A6000 Plus drivers from various sites works just fine with Windows 10. Run the driver installer pack as administrator whenever possible.
If the driver won't install, you might need to disable driver signature enforcement at boot by following this guide.
Related
Guys i think i made a mess...
Earlier when i had installed a fresh copy of windows 7, my PC showed me nexus 4 MTP under Portable Devices from where i could transfer files and all...(i didnot had the android-SDK Kit with adb at that time)
I wanted to flash stock image back so for that i downloaded the WUG's Dev KIT 1.7.3 and so when it was checking for my ADB status i didnot return that allow PC to read adb on my Phone and so the TOOLKIT gave an error...so i went for the initial setup to install drivers in which the step states to uninstall every installed driver related to my NEXUS...i did so...after wards in step 2 it asked to to install the Google/universal ADB drivers which i did and i finally restarted my pc....
Now what issue i am having is that neither my ADB is connecting nor my device is showing under portable devices...!!!
Guys please help...i am unable to fix this because i want to make a clean my internal storage but not without making a backup of Picx, Music and Downloads and esp. the Titanium and TWRP BCKP files!!!
HELP HELP HELP!!! :crying::crying::crying::crying:
And now my Lappy is not even trying to install the Nexus 4 driver, earlier it used to show not installed
Flashed a nightly Quarx 4.4 custom rom with cache/dalvik wipe only and ended up with the google/moto logo on reboot. I'm unable to use Team Win Recovery in Bootmenu v2.2-beta, it returns to the home screen when selecting. When using Motorola Stock Recovery it reboots but doesn't enter recovery mode. Any tips on this?
Wanted to start from scratch and tried to flash an .sbf using RSD Lite v5.7 in Windows 8 Pro 64, but the Defy doesn't even show up as device in RSD. The Defy responds accordingly. Original cable is connected to USB2.0, latest drivers are installed using MDM showing up in DM. It seems RSD Lite is not compatible with W8?
Sir Flashalot said:
Flashed a nightly Quarx 4.4 custom rom with cache/dalvik wipe only and ended up with the google/moto logo on reboot. I'm unable to use Team Win Recovery in Bootmenu v2.2-beta, it returns to the home screen when selecting. When using Motorola Stock Recovery it reboots but doesn't enter recovery mode. Any tips on this?
Wanted to start from scratch and tried to flash an .sbf using RSD Lite v5.7 in Windows 8 Pro 64, but the Defy doesn't even show up as device in RSD. The Defy responds accordingly. Original cable is connected to USB2.0, latest drivers are installed using MDM showing up in DM. It seems RSD Lite is not compatible with W8?
Click to expand...
Click to collapse
Some people say that installing RSD Lite v5.7 in compatibility mode works, at least if you use a USB 2.0 port instead of USB 3.0. (I don't have windows 8, so I can't test it myself.)
If all else fails, you can use sbf_flash in a linux live environment. If you've never used Linux before, I recommend using Unetbootin to install and run Ubuntu from a USB drive.
Proverbs2 said:
Some people say that installing RSD Lite v5.7 in compatibility mode works, at least if you use a USB 2.0 port instead of USB 3.0. (I don't have windows 8, so I can't test it myself.)
If all else fails, you can use sbf_flash in a linux live environment. If you've never used Linux before, I recommend using Unetbootin to install and run Ubuntu from a USB drive.
Click to expand...
Click to collapse
Hm, I did run RSD in admin/compatibility mode but installed it the normal way. I thought this option was not selectable, but will check again tonight. Thanks. If this fails, I'll try a non-Win8 pc avoiding Linux bootables, although the sbf_flash method is pretty straightforward.
I use RSDLite 6.1.5 on Windows 8.1 and it works.
hotdog125 said:
I use RSDLite 6.1.5 on Windows 8.1 and it works.
Click to expand...
Click to collapse
Thanks, will try tomight. Not sure if I already used this version number.
The trick with installing RSDLite 5.7 in compatibility mode didn't work.
Alas, RSDLite 6.1.5 doesn't work either. Are you using 32-bit OS version of Windows 8? Mine is 64-bit.
Sir Flashalot said:
Alas, RSDLite 6.1.5 doesn't work either. Are you using 32-bit OS version of Windows 8? Mine is 64-bit.
Click to expand...
Click to collapse
32bit.
I was trying to install CM 13 through TWRP. I wiped all the data of my phone. When I connected my phone to PC to copy CM 13, my PC is not detecting the phone. Previously it used to detect when I was installing custom recovery. How do I copy the downloaded CM13 files to my phone in order to install it? also I have installed the Zuk Drivers.
Reahan1 said:
I was trying to install CM 13 through TWRP. I wiped all the data of my phone. When I connected my phone to PC to copy CM 13, my PC is not detecting the phone. Previously it used to detect when I was installing custom recovery. How do I copy the downloaded CM13 files to my phone in order to install it? also I have installed the Zuk Drivers.
Click to expand...
Click to collapse
Update google usb driver from device manager
Sent from my ZUK Z1 using Tapatalk
raj_jdja said:
Update google usb driver from device manager
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
please tell me how do i do that
I googled that and i think i got even more messed up !
maybe am posting in the wrong thread, but guys i need your help
first of all i download oreoo firmware with 3 updates files by mistake i did not backup my firmware by twrp
and i wiped the system and cash .
now my phone for sure is not booting. sure huawie mate 9 pro has not sd card so i tried to use otg usb connection
. i tried to connect my phone to pc to use adb slideload but driver is not recognized.....................
some one help me if there is any tool can flash the original stock rom
What is the reason for installing TWRP, I rooted it but if I restart the smartphone, TWRP and Root are lost, deleted and the main menu recovery of redmi note 7 MIUI 12.5.3 returns
how to solve it?
It helps to ask your question in the proper section. Please search before posting.
Xiaomi Redmi Note 7
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Which method did you use and did it follow the instructions?
ze7zez said:
Xiaomi Redmi Note 7
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Which method did you use and did it follow the instructions?
Click to expand...
Click to collapse
minimal abd fastboot and smartphone in fastboot I downloaded the latest version of TWRP for Redmi Note 7
my PC recognized the smartphone normally I activated USB debugging and file transfer on the redmi note 7
installed normally but I only used it while not restarting the smartphone
Hello.
I need help, please.
I have a Redmi Note 7 and I tried to install android 13 on it using TWRP, however, I made a mistake and using TWRP I ended up formatting the entire smartphone. I can no longer use Mi-Recovery 3.0 or enter TWRP, because when I click volume up and power nothing happens and the cell phone just starts because I managed to install its original android using Mi flash.
How can I restore or install recovery mode with mi-recovery 3.0 and thus be able to install the newest versions of android?
I also wanted to know if I can install android 13 or others that were not official for my device without TWRP, mi-recovery mode, or another that depends on the commands described above, which are not working.
Thanks for the help.