Related
http://twrp.me/devices/samsunggalaxys6.html
I'm guessing this is only for international variants? Is that correct?
NJGSII said:
http://twrp.me/devices/samsunggalaxys6.html
I'm guessing this is only for international variants? Is that correct?
Click to expand...
Click to collapse
Yup, looks like it's for the international model of the phone. At least we're getting something lol. Have you looked at the htc one m9 forums? They have so many roms and kernels already. Type jealous hahaha
Sent from my SM-G925T using Tapatalk
Should work on all S6 if I'm not mistaken since it's the same hardware.
**edit: flashed it via Flashify and was able to get into it without any issues on my Canadian S6!
Elisha said:
Should work on all S6 if I'm not mistaken since it's the same hardware.
**edit: flashed it via Flashify and was able to get into it without any issues on my Canadian S6!
Click to expand...
Click to collapse
Yup just did the same on my S6 and it worked. Now let's get the custom Roms going baby!
Quick video showing the easiest way to flash this recovery!
osmosizzz said:
Yup, looks like it's for the international model of the phone. At least we're getting something lol. Have you looked at the htc one m9 forums? They have so many roms and kernels already. Type jealous hahaha
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
That's because they already had the M9 software over a month ago lol. The rom makers basically already had roms ready before the release date.
I wonder why there is no device tree.
Is it only for S6 or S6 Edge also?
Sent from my SM-G925F using XDA Free mobile app
Flashed via flashify on the sprint variant. Took forever to boot into twrp, then when it finally did, touchscreen wouldn't respond so i couldn't do anything.
Everytime i reboot it keeps rebooting into twrp. So i guess im stuck until sprint twrp.img or sprint firmware is released. I can still get into DL mode so whatev.
/shrug
owenbeals said:
Quick video showing the easiest way to flash this recovery!
Click to expand...
Click to collapse
Could you post another link for your video please I keep getting page not available on current link
not working with me
stuck in boot
SM-G920F
a0007 said:
not working with me
stuck in boot
SM-G920F
Click to expand...
Click to collapse
Do you have the newest version of Odin?
Japultra said:
Do you have the newest version of Odin?
Click to expand...
Click to collapse
did it by Flashify apk
Flashed using newest Odin for Canadian version. Bingo
The international devices are these model numbers:
SM-G920F, SM-G925F, SM-G920I or SM-G925I
Taken from this website.
It has the download links, installation instructions etc.
now I flashed it by odin but not going to recovery
G920F
m3dd0g said:
Is it only for S6 or S6 Edge also?
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
Just the S6. I tried it on my edge and it works, but the screen becomes illegible...it turns green for some reason.
tmobile S6, flashed with latest odin, installed without a problem
v2.2v said:
tmobile S6, flashed with latest odin, installed without a problem
Click to expand...
Click to collapse
Same^ Backup works great, it boots into it quickly and the buttons and functions all seem to work.
Not working for me. Tried using Flashify and Odin. No bueno.
Hi
Anyone in the UK with an unlocked s7 managed to get the latest update, build XXU1APD1 ?
Pete
Sent from my S7 Edge
peter7769 said:
Hi
Anyone in the UK with an unlocked s7 managed to get the latest update, build XXU1APD1 ?
Pete
Sent from my S7 Edge
Click to expand...
Click to collapse
No, not yet. Germany DBT have it though.
Thanks for taking the time to reply
Sent from my S7 Edge
peter7769 said:
Thanks for taking the time to reply
Sent from my S7 Edge
Click to expand...
Click to collapse
Are you rooted? I am and I have it installed, just use FlasFire all if you are rooted, easy.
belloni said:
Are you rooted? I am and I have it installed, just use FlasFire all if you are rooted, easy.
Click to expand...
Click to collapse
No not rooted, staying completely stock for the time being.
Sent from my S7 Edge
belloni said:
Are you rooted? I am and I have it installed, just use FlasFire all if you are rooted, easy.
Click to expand...
Click to collapse
Can you explain more of what FlasFire is, Im rooted and been wanting to update my phone.
Jomari29 said:
Can you explain more of what FlasFire is, Im rooted and been wanting to update my phone.
Click to expand...
Click to collapse
It's a fantastic app created by Chainfire. Basically enables root users for example without recovery can flash ROMs,Kernels,xposed, software updates etc all through it.
belloni said:
It's a fantastic app created by Chainfire. Basically enables root users for example without recovery can flash ROMs,Kernels,xposed, software updates etc all through it.
Click to expand...
Click to collapse
Its like Odin? can it flash Sammobile Firmwares?
Jomari29 said:
Its like Odin? can it flash Sammobile Firmwares?
Click to expand...
Click to collapse
Basically yes, Odin on your phone! I've updated to latest firmware via it last night. Just download the latest firmware, extract and save the AP file to phone. Then go to FlashFire and chose Firmware Package, hey presto!
belloni said:
Basically yes, Odin on your phone! I've updated to latest firmware via it last night. Just download the latest firmware, extract and save the AP file to phone. Then go to FlashFire and chose Firmware Package, hey presto!
Click to expand...
Click to collapse
Interesting! Did it do a wipe or anything? Would I need to reinstall Viper and xposed after flashing the latest firmware using this?
riso123 said:
Interesting! Did it do a wipe or anything? Would I need to reinstall Viper and xposed after flashing the latest firmware using this?
Click to expand...
Click to collapse
So you have all options required to do what you need within the all such as wipe etc. If flashing any firmware, yes you'll have to reflash xposed. The great thing about the app is that you can put it in a queue to do it all at once so wipe, flash new firmware, flash xposed, done.
http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
Staying stock right now as I'm sure the new update will be here in the uk within the month
belloni said:
So you have all options required to do what you need within the all such as wipe etc. If flashing any firmware, yes you'll have to reflash xposed. The great thing about the app is that you can put it in a queue to do it all at once so wipe, flash new firmware, flash xposed, done.
http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
Click to expand...
Click to collapse
So I can also decide not to wipe and then just have it re-flash xposed after the upgrade?
riso123 said:
So I can also decide not to wipe and then just have it re-flash xposed after the upgrade?
Click to expand...
Click to collapse
Yup, that's what I did. Just upgraded software, reflashed xposed and all is the same, couldn't be easier
belloni said:
Yup, that's what I did. Just upgraded software, reflashed xposed and all is the same, couldn't be easier
Click to expand...
Click to collapse
Sweet! Giving it a go now. Although the G935FXXU1APD1_G925FTCE1APD1_TCE zip from samfirmware still has another hour and a half to go!
belloni said:
Yup, that's what I did. Just upgraded software, reflashed xposed and all is the same, couldn't be easier
Click to expand...
Click to collapse
Worked for me just now. Thanks again!
Anyone on this latest version noticed a performance increase? Phone seems more solid and responsive (not that it wasn't already) and games apear to have lost the lag.
Sent from my SM-G935F using XDA-Developers mobile app
Probably a daft question but where can I find a definitive UK update? I've seen a few links on XDA but the information is muddied based on international variations. I'm currently rooted and running xposed v81. I also have FlashFire, which I used to flash the latest xposed. Thanks for any assistance.
Sent from my SM-G935F using XDA-Developers mobile app
KevQuoi said:
Probably a daft question but where can I find a definitive UK update? I've seen a few links on XDA but the information is muddied based on international variations. I'm currently rooted and running xposed v81. I also have FlashFire, which I used to flash the latest xposed. Thanks for any assistance.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Here is where most XDA peeps look for their Firmwares, just look for your country, theres a few UK ones, good to bookmark
http://www.sammobile.com/firmwares/database/SM-G935F/
Jomari29 said:
Here is where most XDA peeps look for their Firmwares, just look for your country, theres a few UK ones, good to bookmark
http://www.sammobile.com/firmwares/database/SM-G935F/
Click to expand...
Click to collapse
Thanks for the link, much appreciated.
On a related note I have an EE EVR build, could I switch to BTU or would that create issues for my device? I ask because the BTU firmware is more up to date than the EE.
Hey XDA,
I just recently purchased a AT&T S7 (SM-G930A). I also just recently found out that AT&T doesn't push updates to non AT&T network phones. I am using the phone with T-Mobile and I was wondering if it was possible to flash the T-Mobile stock rom without tripping Knox or anything of that sort. I remember being able to do this to my AT&T Note 2 back in the day. If it is possible, can someone kindly link me to the file and instructions on how to flash the stock ROM from T-Mobile? Thanks!
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
highaltitude said:
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you! One more question, I have the stock T-Mobile ROM and for the CSC, there are two files:
CSC and HOME_CSC
Which one do I choose in Odin for the CSC option?
Thanks
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
IbbiAnsi said:
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
Click to expand...
Click to collapse
use different version ODIN available in root guide in Verizon thread
kuduku said:
use different version ODIN available in root guide in Verizon thread
Click to expand...
Click to collapse
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
IbbiAnsi said:
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
Click to expand...
Click to collapse
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
kuduku said:
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
Click to expand...
Click to collapse
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
hugeadrian said:
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
Click to expand...
Click to collapse
I flashed to the latest update of the ROM so I can't prove it works. But from what I've heard, after flashing the ROM you need to factory reset the phone so it can unregister from att and register to whatever carrier you are using it on. I am not sure how true this is but I read it somewhere and it seems to make sense.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
kuduku said:
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
Click to expand...
Click to collapse
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Wonder if wifi calling works using a TMobile firmware with att service
joe3681 said:
Wonder if wifi calling works using a TMobile firmware with att service
Click to expand...
Click to collapse
T-mobile WiFi calling works fine on the T-mobile ROM.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
930A and 930U both have to be similar bootloader , thats why we could change ROMs
kuduku said:
930A and 930U both have to be similar bootloader , thats why we could change ROMs
Click to expand...
Click to collapse
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Could you please check for me if T-Mobile ROM has portuguese language?
Thank you
Click to expand...
Click to collapse
IbbiAnsi said:
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
kuduku said:
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
Click to expand...
Click to collapse
This won't be possible until ATT decides to update to bootloader V3
Sent from my SM-G930T using Tapatalk
I was also able to flash the 930T on my 930A. I saw there was a Note 7 port but you need root and TWRP. Haven't tried flashing back to 930U yet, but thinking about it.
Just a quick post to let people know I flashed the SM-N920G INS (Indian) Android 7.0 Nougat firmware to a stock unrooted SM-N920I XSA (Australian) Android 6.0 MM phone no issues so far.
- Dan
Sent from my SM-N920G using XDA-Developers Legacy app
danw1million said:
Just a quick post to let people know I flashed the SM-N920G INS (Indian) Android 7.0 Nougat firmware to a stock unrooted SM-N920I XSA (Australian) Android 6.0 MM phone no issues so far.
- Dan
Sent from my SM-N920G using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same as the marshmallow times
How you did that? Odin? No system.img fail?
oooh very excited by this.
I cant risk it yet but would love to hear of more experiances
My n920i has been flashed with n920g since marshmallow.... I've received all the OTA updates, including the nougat one. No issues to report whatsoever.
WIth a SM-N920G in Guatemala, i got fail at system.img, had to download stock rom 6.0.1 to get the phone back again. PDA N920GUBS3BPI4 / CSC N920GUWM3BPI1.
danw1million said:
Just a quick post to let people know I flashed the SM-N920G INS (Indian) Android 7.0 Nougat firmware to a stock unrooted SM-N920I XSA (Australian) Android 6.0 MM phone no issues so far.
- Dan
Click to expand...
Click to collapse
Its been a while since I've done something like this.. remind me.. this doesnt wipe the device or trip knox does it?
danw1million said:
Just a quick post to let people know I flashed the SM-N920G INS (Indian) Android 7.0 Nougat firmware to a stock unrooted SM-N920I XSA (Australian) Android 6.0 MM phone no issues so far.
- Dan
Sent from my SM-N920G using XDA-Developers Legacy app
Click to expand...
Click to collapse
im having the same device running stock marshmallow can u please tell me how you did this im getting SYSTEM.IMG FAIL message.. i need to install nougat on my device..
any issues with samsung pay or the US carriers?
This will wipe every thing but Knox counter is intact.
If you get system img fail, use the 4 filed method first to changes SM-N920I to SM-N920G firmware.
Got a link to the 4 files?
Sent from my SM-N920I using Tapatalk
danw1million said:
This will wipe every thing but Knox counter is intact.
Click to expand...
Click to collapse
ahh a wipe. bugger. will have to wait for the 920I native version
cartertucker said:
any issues with samsung pay or the US carriers?
Click to expand...
Click to collapse
none to report, using with cricket (AT&T) and also have s3 with Sammy Pay.
danw1million said:
If you get system img fail, use the 4 filed method first to changes SM-N920I to SM-N920G firmware.
Click to expand...
Click to collapse
Hey, wanna help some people out with a link or point out where you got the 4 files?
Sent from my SM-N920I using Tapatalk
Link to 4 files method:
https://forum.xda-developers.com/no...ote-5-6-01-marshmallow-update-t3329963/page22
Enjoy !
Good man....knew I saw it somewhere.
https://mega.nz/#!hM9FBILb!UZZB4J9JzoswFPzyaDfZmmfLGzM-QTP7pjtt4Kuy_OI
Cheers
Sent from my SM-N920I using Tapatalk
danw1million said:
Link to 4 files method:
https://forum.xda-developers.com/no...ote-5-6-01-marshmallow-update-t3329963/page22
Enjoy !
Click to expand...
Click to collapse
Hey just a question, I know you changed yours from lollipop 920i to MM 920g (last year)....but when you upgraded to nougat were you already on the Indian marshmallow rom?
I'm asking because I'm thinking about doing mine now but I'm already on AU MM And I'm not looking to soft brick mine.
From what I've read in the S6 forums I think the problem with everyone also failing on sys.img is because of 6.0.1 secure bootloader only allowing matching regional phones to update properly. I think that might be preventing the change from AU to INS MM also.
Has anyone successfully downgraded from 6.0.1(with all the current security updates) to 5.1.1?
Thoughts?
I tried this method using 4 files, System.img fail error. tried to downgrade to Lollipop using 4 files, same System.img fail error. Bummer
vishalmmehra said:
I tried this method using 4 files, System.img fail error. tried to downgrade to Lollipop using 4 files, same System.img fail error. Bummer
Click to expand...
Click to collapse
This seems to be common. I know there's been a few posts saying just use the 4 files but it's not working.
So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
KLit75 said:
So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
Click to expand...
Click to collapse
On what firmware build are you now?
norbarb said:
On what firmware build are you now?
Click to expand...
Click to collapse
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
mhdsweidan said:
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
Click to expand...
Click to collapse
Cool. Let me know how you make out.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
You need to get to AT&T firmware first , and then flash this update.
norbarb said:
You need to get to AT&T firmware first , and then flash this update.
Click to expand...
Click to collapse
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
KLit75 said:
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
Click to expand...
Click to collapse
Yes, you are correct on sdcard but do not extract , just apply from sdcard
Sent from my SM-N950U using XDA Premium HD app
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Dr_Liquid said:
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Click to expand...
Click to collapse
Look in the oreo ota thread under guide, etc. section there is a fix posted their as well as some other fixes.
https://forum.xda-developers.com/showthread.php?t=3749891