So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
KLit75 said:
So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
Click to expand...
Click to collapse
On what firmware build are you now?
norbarb said:
On what firmware build are you now?
Click to expand...
Click to collapse
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
mhdsweidan said:
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
Click to expand...
Click to collapse
Cool. Let me know how you make out.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
You need to get to AT&T firmware first , and then flash this update.
norbarb said:
You need to get to AT&T firmware first , and then flash this update.
Click to expand...
Click to collapse
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
KLit75 said:
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
Click to expand...
Click to collapse
Yes, you are correct on sdcard but do not extract , just apply from sdcard
Sent from my SM-N950U using XDA Premium HD app
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Dr_Liquid said:
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Click to expand...
Click to collapse
Look in the oreo ota thread under guide, etc. section there is a fix posted their as well as some other fixes.
https://forum.xda-developers.com/showthread.php?t=3749891
Related
korea p600 wifi and p605s/k/l update NB1
still 4.3 but
i heared this situation fix https://www.youtube.com/watch?v=7qqIPWYIpHE
and smooth ,fast
download link sm-p600 NB1 replace down link
http://www.innoloud.com:82/SAMSUNG/Galaxy Note 10.1/P600KXUANB1_P600KOOANB1_HOME.tar
http://www.innoloud.com:82/SAMSUNG/Galaxy Note 10.1/P600KXUANB1_P600KOOANB1HOME.tar
http://www.innoloud.com:82/SAMSUNG/Galaxy Note 10.1/
westside90i said:
korea p600 wifi and p605s/k/l update NB1
still 4.3 but
i heared this situation fix https://www.youtube.com/watch?v=7qqIPWYIpHE
and smooth ,fast
Click to expand...
Click to collapse
You have download link for this? Or a source that says that this is available for download? NB1, i guess that would be february 2014. Would love to get my hands on a new firmware, im starving...
smooth
I Flash NB1
veryveryvery smooth than ml1 mj3
plz wait i upload
Can't watch the video posted right now but what issue does this fix? Is it the long tap shaking issue?
westside90i said:
I Flash NB1
veryveryvery smooth than ml1 mj3
plz wait i upload
Click to expand...
Click to collapse
Do you also have the 605 version? Or if you could link to it, I would be thankfull
nickwarn said:
Do you also have the 605 version? Or if you could link to it, I would be thankfull
Click to expand...
Click to collapse
as far as I know(correct express? sorry i am not good at english) korea p605s/k/l different global p605
download link sm-p600 NB1
http://lap.so/wzaa
westside90i said:
as far as I know(correct express? sorry i am not good at english) korea p605s/k/l different global p605
Click to expand...
Click to collapse
Yeah, they should be but I think the 605s only has less LTE bands then 605. But im not sure, thank you anyways.
How to flash ? I download it and flash by ODIN twice both fail
video is actually long tap press issue, which exist in many many android devices caused by not properly calibrated or poor hardware it is not really related to new update
this file host is giving me issues. I've downloaded 893mb and now it has slowed to 10kb/s which i think will probably error out soon.
It doesn't tell me the size of the entire file, it just comes in as it downloads (does that make sense?). Maybe a checksum?
If anyone knows the actual size of the completed file, that would be useful.
don't flash this on a US p600.
with no odin pda for my model to flash back to stock, I now have updated the firmware, bootloader and recovery to the Korean p600 update. that killed my wifi unfortunately and possibly some other things I haven't noticed yet.
any ideas how to get the old firmware back?
edit: I'm downloading the Taiwan ML1 firmware. hopefully it'll flash correctly and work. I'll report back
edit 2: back in business after flashing ML1. whew. won't make this mistake again
edouble312 said:
don't flash this on a US p600.
with no odin pda for my model to flash back to stock, I now have updated the firmware, bootloader and recovery to the Korean p600 update. that killed my wifi unfortunately and possibly some other things I haven't noticed yet.
any ideas how to get the old firmware back?
edit: I'm downloading the UK ML1 firmware. hopefully it'll flash correctly and work. I'll report back
edit 2: back in business after flashing ML1. whew. won't make this mistake again
Click to expand...
Click to collapse
Huh? Where did you find the UK ml1?
Sent from my SM-P600 using XDA Premium 4 mobile app
alexcarterkarsus said:
Huh? Where did you find the UK ml1?
Sent from my SM-P600 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry, it was Taiwan. wrong country code.
http://samsung-updates.com/device/?id=SM-P600
Hi!
I have an Indian Version of S7 Edge G935FD and I wish to flash the BTU version for the Nougat update.
I have a few queries first:
1. Can I use an Indian Sim (Or Any other country's Sim)on the rom? (The packaging has the Indian Sim Only label)
2. Will the network be smooth? I use 4G here. Are there any issues that I may face or any one of you faced?
3. Anything else I should know?
Thanks!
criss_007 said:
Hi!
I have an Indian Version of S7 Edge G935FD and I wish to flash the BTU version for the Nougat update.
I have a few queries first:
1. Can I use an Indian Sim (Or Any other country's Sim)on the rom? (The packaging has the Indian Sim Only label) - Yes, you can use your normal SIM
2. Will the network be smooth? I use 4G here. Are there any issues that I may face or any one of you faced? - Yes, your network will work normally. You won't notice any difference. The only thing you won't have is VoLTE.
3. Anything else I should know? - Only do this if you want Nougat NOW. Otherwise wait until it's relased on your firmware. But you won't have any issues.
Thanks!
Click to expand...
Click to collapse
Thank You for the quick reply!
Yes. I am too excited for Nougat so I'm unable to control myself. The issue is there is no word on when the Nougat will come in India. The samsung officials have no comment except "There is no update about it yet" or "we do not have official timeline for nougat update in Indian market"
An official word on an estimated time frame for the update would work wonders. Is there any reason why I should wait?
criss_007 said:
Thank You for the quick reply!
Yes. I am too excited for Nougat so I'm unable to control myself. The issue is there is no word on when the Nougat will come in India. The samsung officials have no comment except "There is no update about it yet" or "we do not have official timeline for nougat update in Indian market"
An official word on an estimated time frame for the update would work wonders. Is there any reason why I should wait?
Click to expand...
Click to collapse
Nah, no real reason to wait. Go ahead and flash the UK BTU ROM and then update to Nougat
the_scotsman said:
Nah, no real reason to wait. Go ahead and flash the UK BTU ROM and then update to Nougat
Click to expand...
Click to collapse
Thanks Again! Appreciate it! :good:
the_scotsman said:
Nah, no real reason to wait. Go ahead and flash the UK BTU ROM and then update to Nougat
Click to expand...
Click to collapse
One last question. The link given in another thread doesn't work or has download limit. Is this (https://www.sammobile.com/firmwares/database/SM-G935F/BTU/) the correct site for official signed btu ?
and I am downloading odin and instructions from here: http://www.theandroidsoul.com/download-galaxy-s7-edge-nougat-ota-update/
Lots of info in this thread: https://forum.xda-developers.com/s7-edge/how-to/android-7-0-s7-edge-uk-beta-program-apk-t3493696
Or this one: https://forum.xda-developers.com/s7-edge/how-to/nougat-coming-january-17th-t3535831
Downloading from samfirmware is slow for non-premium members. There are other download links in those threads.
And yes, those instructions for Odin/flashing are correct.
the_scotsman said:
Lots of info in this thread: https://forum.xda-developers.com/s7-edge/how-to/android-7-0-s7-edge-uk-beta-program-apk-t3493696
Or this one: https://forum.xda-developers.com/s7-edge/how-to/nougat-coming-january-17th-t3535831
Downloading from samfirmware is slow for non-premium members. There are other download links in those threads.
And yes, those instructions for Odin/flashing are correct.
Click to expand...
Click to collapse
Right. Started downloading through the samfirm tool . Will keep you updated just in case I'm doing something wrong.
Being downloaded:SM-G935F_1_20161222102339_alpis38j2b_fac.zip.enc4
Edit: Samfirm is fast. Got around 2000kb/s speed which is cool. No issues
criss_007 said:
Right. Started downloading through the samfirm tool . Will keep you updated just in case I'm doing something wrong.
Being downloaded:SM-G935F_1_20161222102339_alpis38j2b_fac.zip.enc4
Click to expand...
Click to collapse
Yep, that's the one
Just unzip the download into a folder. There'll be 4 or 5 files. Just choose each one for the relevant section in Odin (you'll see it obvious) then flash it.
the_scotsman said:
Yep, that's the one
Just unzip the download into a folder. There'll be 4 or 5 files. Just choose each one for the relevant section in Odin (you'll see it obvious) then flash it.
Click to expand...
Click to collapse
Finished the flashing process! Odin sort of showed a not responding title after I selected the ap file but I figured it was doing its job and waited patiently. It paid off! It finished loading and I started and flashed successfully. Boot up was fine and now I'm downloading a 1291.19 gb update!
Yay!
criss_007 said:
Finished the flashing process! Odin sort of showed a not responding title after I selected the ap file but I figured it was doing its job and waited patiently. It paid off! It finished loading and I started and flashed successfully. Boot up was fine and now I'm downloading a 1291.19 gb update!
Yay!
Click to expand...
Click to collapse
Awesome, you're almost done
Yep, the AP file takes a short time in Odin to select as I think it just scans it first to check the md5 is correct.
criss_007 said:
Finished the flashing process! Odin sort of showed a not responding title after I selected the ap file but I figured it was doing its job and waited patiently. It paid off! It finished loading and I started and flashed successfully. Boot up was fine and now I'm downloading a 1291.19 gb update!
Yay!
Click to expand...
Click to collapse
Let me know how it went, were you rooted earlier ? is your knox status still intact after flashing BTU via odin?
the_scotsman said:
Awesome, you're almost done
Yep, the AP file takes a short time in Odin to select as I think it just scans it first to check the md5 is correct.
Click to expand...
Click to collapse
Done!!! I'm busy exploring the new update! Cheers!
And a personal thank you to #the scotsman! You were really helpful!
pratik_193 said:
Let me know how it went, were you rooted earlier ? is your knox status still intact after flashing BTU via odin?
Click to expand...
Click to collapse
No root. And Yes. Knox is intact.
Updated the info/ experience further along this thread.
the_scotsman said:
Awesome, you're almost done
Yep, the AP file takes a short time in Odin to select as I think it just scans it first to check the md5 is correct.
Click to expand...
Click to collapse
All works fine but Do you by chance have the samsung my galaxy apk? I really liked the my galaxy app but the one does not work. Only option is the my galaxy app uk newly released nut thats not available here.
criss_007 said:
All works fine but Do you by chance have the samsung my galaxy apk? I really liked the my galaxy app but the one does not work. Only option is the my galaxy app uk newly released nut thats not available here.
Click to expand...
Click to collapse
Just download it from apkmirror
https://www.apkmirror.com/apk/samsung-electronics-co-ltd/galaxy-apps/
Can I install indian firmware on the At&t model of s7 edge?? If not pls suggest me the best firmware to AT&T MODEL ? thanks
ravikiran1252 said:
Can I install indian firmware on the At&t model of s7 edge?? If not pls suggest me the best firmware to AT&T MODEL ? thanks
Click to expand...
Click to collapse
First U firmware, then CSC for VoLTE
https://forum.xda-developers.com/showpost.php?p=72532123&postcount=18
I just received security patch update in 60mb.
Everything running very smooth so far no issues.
"Edit" users who are curious to know that bootloader is still unlocked and i downgraded to epe3 and dok2 just fine.
Just received same update. Working great.
Sent from my SM-N910T using Tapatalk
Delete
Any chance of getting the ODIN flashable?
TopGun904 said:
Any chance of getting the ODIN flashable?
Click to expand...
Click to collapse
ODIN flashable version is up on SamMobile website. I downloaded it, flashed it, then re-installed TWRP recovery and also was able to re-root the phone after the upgrade.
TopGun904 said:
Any chance of getting the ODIN flashable?
Click to expand...
Click to collapse
You can download HERE
curgervending said:
ODIN flashable version is up on SamMobile website. I downloaded it, flashed it, then re-installed TWRP recovery and also was able to re-root the phone after the upgrade.
Click to expand...
Click to collapse
Did it trip knox?
I'm a relative noob to flashing rom's. Can someone tell me if I'm understanding this correctly?
Installing this update will *unroot* my phone? So after installing this update through odin, I will need to install twrp again while in download mode? And then, once that's installed, reroot my phone?
diggeryo said:
I'm a relative noob to flashing rom's. Can someone tell me if I'm understanding this correctly?
Installing this update will *unroot* my phone? So after installing this update through odin, I will need to install twrp again while in download mode? And then, once that's installed, reroot my phone?
Click to expand...
Click to collapse
Yes it wil unroot your device you have to flash twrp and root again.
I am getting excellent battery life with this new update no heating issues at all.
Here's the MEGA LINK:
ttps://mega.nz/#!pFNnBawI!O-k_orp7QR48f54y5aMH9uqscnjWrC3pkmIByQNEkLA
add an h before pasting
File no longer available. Can you please fix it again..
rathisarov said:
File no longer available. Can you please fix it again..
Click to expand...
Click to collapse
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
all the firmwares for our N910T are here..
You can downgrade from MM to LP by flashing this?
I've tried EPJ2 to DOK2 and it didn't work.
Dorasamu said:
You can downgrade from MM to LP by flashing this?
I've tried EPJ2 to DOK2 and it didn't work.
Click to expand...
Click to collapse
If you have N910t3 it might brick
My wife's T-Mobile note 4 just received an OTA for a security through TMobile. Thing is she's on cricket wireless, is it ok to take the update?
ryanallaire said:
My wife's T-Mobile note 4 just received an OTA for a security through TMobile. Thing is she's on cricket wireless, is it ok to take the update?
Click to expand...
Click to collapse
Should be fine to update as I got the OTA as well and I'm AT&T.
prican25 said:
Should be fine to update as I got the OTA as well and I'm AT&T.
Click to expand...
Click to collapse
Well I know cricket uses at&t so that's why I'm kinda curious about it being a TMobile update..
I have the unlocked U1 version and am trying to use this site to flash new beta Oreo. I don't see my variant listed. I only see the U and not U1. Is that the same file I should flash?
jhester1967 said:
I have the unlocked U1 version and am trying to use this site to flash new beta Oreo. I don't see my variant listed. I only see the U and not U1. Is that the same file I should flash?
Click to expand...
Click to collapse
I would look other places if they arent clear enough
Thanks. I'm sure someone though is in the same position as me and hopefully had an answer
It's only for carrier S8's. They have no firmware for unlocked models.
You can flash QK5 through Odin and do it that way if you're on a US carrier and want bloat though.
jhester1967 said:
I have the unlocked U1 version and am trying to use this site to flash new beta Oreo. I don't see my variant listed. I only see the U and not U1. Is that the same file I should flash?
Click to expand...
Click to collapse
I just updated my phone from that site and it works perfectly thru stocked recovery. They are all OTA updates so it will not wipe your phone. Only thing is when flashing from nougat to oreo change your themes back to pure stock or you will get system ui error, and have to factory reset
ninja75 said:
I just updated my phone from that site and it works perfectly thru stocked recovery. They are all OTA updates so it will not wipe your phone. Only thing is when flashing from nougat to oreo change your themes back to pure stock or you will get system ui error, and have to factory reset
Click to expand...
Click to collapse
What version phone do you have?
jhester1967 said:
What version phone do you have?
Click to expand...
Click to collapse
G955U locked to tmobile. I just updated last night to oreo beta 3
ninja75 said:
G955U locked to tmobile. I just updated last night to oreo beta 3
Click to expand...
Click to collapse
That's awesome. My problem is I can't use the site apparently since I'm not on a carrier version. I'm using Unlocked U1 version.
jhester1967 said:
That's awesome. My problem is I can't use the site apparently since I'm not on a carrier version. I'm using Unlocked U1 version.
Click to expand...
Click to collapse
It should work on all u.s. snapdragon s8+ it's a OTA
ninja75 said:
It should work on all u.s. snapdragon s8+ it's a OTA
Click to expand...
Click to collapse
This is the version I'm running. Which update should I choose?
I have an Sprint Samsung S8. I want to update to Android Pie 9. Its currently on Android 8.0.0 - R16NW.G950USQU5CSA4. And I want to flash with Odin to any compatible Android Pie FW. I am personally not looking to unlock or anything. The confusing part is that when I research the FW version (G950USQU5CSA4) it comes as a Verizon FW. So I am not sure if is safe to flash any of the Pie FW available on sammobile for Sprint.
It is safe to flash for example to one like G950USQU5DSD3 that appears in Sammobile and is for Sprint?
BobAt1080p said:
I have an Sprint Samsung S8. I want to update to Android Pie 9. Its currently on Android 8.0.0 - R16NW.G950USQU5CSA4. And I want to flash with Odin to any compatible Android Pie FW. I am personally not looking to unlock or anything. The confusing part is that when I research the FW version (G950USQU5CSA4) it comes as a Verizon FW. So I am not sure if is safe to flash any of the Pie FW available on sammobile for Sprint.
It is safe to flash for example to one like G950USQU5DSD3 that appears in Sammobile and is for Sprint?
Click to expand...
Click to collapse
Ur fw is sm-g950u
kpwnApps said:
Ur fw is sm-g950u
Click to expand...
Click to collapse
Gotcha, so should I install/flash with Odin any SM-g950u fw for Sprint available on Sammobile?
BobAt1080p said:
Gotcha, so should I install/flash with Odin any SM-g950u fw for Sprint available on Sammobile?
Click to expand...
Click to collapse
Yes
kpwnApps said:
Yes
Click to expand...
Click to collapse
Awesome, thank you!
For any newbie like me who ever had a look at this thread. This definitely work as said by @kpwnApps, I downloaded SM-G950U, build G950USQU5DSD3 (3.92GB) from Sammobile and flashed with Odin. Flashed AP, BL, CP, CSC (not CSC_HOME) on its respective place on Odin. 5m 32s later it was updated with no trouble.
BobAt1080p said:
For any newbie like me who ever had a look at this thread. This definitely work as said by @kpwnApps, I downloaded SM-G950U, build G950USQU5DSD3 (3.92GB) from Sammobile and flashed with Odin. Flashed AP, BL, CP, CSC (not CSC_HOME) on its respective place on Odin. 5m 32s later it was updated with no trouble.
Click to expand...
Click to collapse
Thanks
kpwnApps said:
Thanks
Click to expand...
Click to collapse
Last question, I am personally not interested. Just curious. As long as is the same android version, would it be possible to downgrade too by flashing with Odin and earlier version? or would something like that cause a brick?
BobAt1080p said:
Last question, I am personally not interested. Just curious. As long as is the same android version, would it be possible to downgrade too by flashing with Odin and earlier version? or would something like that cause a brick?
Click to expand...
Click to collapse
It depends on bootloader version but it doesnt brick anything