Related
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?
If you have a d800 you shouldn't install a d803 ROM I believe there are hardware and kernel changes between both of them ... The radios are different... Try installing a d800 ROM if you can access recovery by sideload and then install a d800 modem
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
And after that just change the APN and enable fast dormancy ... I believe telus supports it too
kmacsouris said:
My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?
Click to expand...
Click to collapse
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.
I need help D802
maloma99 said:
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.
Click to expand...
Click to collapse
hi maloma99
I need your help my lg g2 is bricked please,
i am trying to install D802 .tot file, my phone is already D802, but
the error is crossDL [] to [D802]
So, I was trying to install a custom ROM on my G2 and screwed up. Now I have no recovery to boot into and can't access fastboot to flash a recovery (not even sure if its possible). I have tried to flash the stock android .kdz files using the LG Flash Tool, but haven't had any success in that area either. I'm not really sure to go from here.
If anyone has any ideas that I might go about fixing this mess, they would be most welcome.
Shlinky12193 said:
I have tried to flash the stock android .kdz files using the LG Flash Tool, but haven't had any success in that area either.
Click to expand...
Click to collapse
Elaborate please. Why haven't you had any success? What have you tried? What problem(s) are you encountering?
Thus far I've been trying to load the stock ROM back onto the phone but haven't had any luck as the process keeps stopping at the software update stage. It either says the server can't connect or it fails at 2%. I have the phone driver and I'm pretty sure I have the right .kdz file.
Throughout all this the phone doesn't actually begin the 'update'. The phone is on the Firmware Update Screen and stays at 0%.
So I actually did manage to fix this in the end. Just screwed around with the files and flash tools till it eventually worked.
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back! ✌?
Off topic:Took me 1.5 months to find a way to fix it! ?
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Jongla said:
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Click to expand...
Click to collapse
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Herny123 said:
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Click to expand...
Click to collapse
It's simply shown as "Android".
Jongla said:
It's simply shown as "Android".
Click to expand...
Click to collapse
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Herny123 said:
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Click to expand...
Click to collapse
Oh I don't know how to thank you!
Pdanet drivers did my work exactly as you say!! ?
Now what img should I flash?
D802 or D800?
Of course D802 as it thinks its a D802.
Then flash KDZ,then after booting up try doing as op..
Best of luck .. ?
You are a life saver!
Worked perfectly without any haste.
Thanks alot
Where do I will get D802 and D800 Rom kdz and what about flashing kernel
Where do I will get D802 and D800 Rom kdz and what about flashing kernel
go to'go back to stock' thread,you will find all kdz and tot.
And this kdz and tot includes kernels.
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
avat2064 said:
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
Click to expand...
Click to collapse
Open up the motherboard and see what's written there.
But most probably you have D800.
And if that is the model,here you go for the Tot.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/
I flashed 10o version with the method above.
Herny123 said:
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back!
Off topic:Took me 1.5 months to find a way to fix it!
Click to expand...
Click to collapse
my touch is not working properply. so, how can i change model number any other solution?
what laf, recovery,boot and aboot img
what type of laf.img, boot.img and recovery.img i use for my lg g2.
when i open it i saw d800 AT&T near processor over a sink of processor.
so what type of file i flash to my device to get correct download mode.
the problem which happen's to me is this.
my device was on KITKAT when i try to update my device to lollypop using lg support tool (auto update using lg support tool to latest android version) after that i got no imei, no baseband and bad touch screen than i flash kdz file but same happend no imei,no baseband and badtouch.than i try to flash using TOT method and i wipe out everything.so know i try pin's touching method on which i get qhsusb mode and i am able to flash different img files.but i don't know which version of files i use..do you know than please help me specify the correct version that i flash and get download , recovery all at the same time than i will flash 10d or 10o ROM using TOT method.
but first i need to fix download mode (i don't know which img files i use).
thank you.
Try laf.img,boot.img of D802 if you used D802 as the model to update to lolipop.this will fix download mode.
Umar_khan said:
my touch is not working properply. so, how can i change model number any other solution?
Click to expand...
Click to collapse
The other solution is you have to edit the hex of D800 TOT file,which I could never succeed at.
HELP ME!
I have Lg g2 D80220b Kitkat 4.4.2, LgMobile Support Tools > Upgrade to D80230a Lollipop 5.0.2
now this my phone Touchscreen random clicked, Help me ALL
This phone NEW Phone
/Sorry, My English Language is BAD/
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
lg g2 brick issue
zakir_zoheb said:
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
Click to expand...
Click to collapse
have u solve ur issue bro.
kalpesh patil said:
have u solve ur issue bro.
Click to expand...
Click to collapse
No kalpesh.. i couldn't... looking forward for your help.
As you read. After a whole day of searching non-stop from day 'til night, I finally give up and ask for help.
I've tried to flash a Lollipop ROM, which resulted in my LG G2 D800 having a soft brick.
I already had this issue once, so I knew what I had to do. I used a Kitkat 20c TOT package to return to Stock Kitkat. However, I kept recieving an error;
Device Model Unknown, Check Model or DLL. Or something similar. Upon my first search, I found out about the custom DLL.
So I tried it. But I get another error; CrossDL [Unknown] to [D800]. I tried 3 different DLL files, modified the TOT file (Hex Editor paste write)
I also ended up flashing some img files I don't remember which post it was exactly, but it was from here.
My device no longer boots up, it gives me, however, the option to either reboot or go directly to download mode once I power it on.
Please note; before and after the img flashing. I kept having the same issue.
So in short, I have no idea of how to flash the tot file because it keeps giving me a Device Model error. It there truly a way for the LG FLash tool (1.8.1 I think) to simply ignore what model it is before flashing?
Also, I tried this on another computer, but no luck, same result. I'm doing this on my PC with a Virtual Machine (I run Linux Mint as a Main OS) so I'm truly unsure if it's that, though the first time I did it when I first had the issue, it worked just fine...
Any ideas, suggetions?
Edit :: Another reason why I'm posting this is because a lot, if not all people with a D800 with this issue, their posts are either ignored or discontinued. So if I get this fixed, I'll make sure to specify how I did.
bump?
buump?
lordsolrac2 said:
buump?
Click to expand...
Click to collapse
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Art Vanderlay said:
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Click to expand...
Click to collapse
I actually flashed This ROM
The first time I had this issue, it was because, I flashed CloudyG2 3.3.
Both the D800 Variants of the ROMs
It seems the issue is that I didn't have the kitkat bootloader (though, my device has Kitkat by default, so, why does it have this issue?)