[Q] Crossdl [D803] to [d800] - Help! - G2 Q&A, Help & Troubleshooting

My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?

If you have a d800 you shouldn't install a d803 ROM I believe there are hardware and kernel changes between both of them ... The radios are different... Try installing a d800 ROM if you can access recovery by sideload and then install a d800 modem
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
And after that just change the APN and enable fast dormancy ... I believe telus supports it too

kmacsouris said:
My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?
Click to expand...
Click to collapse
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.

I need help D802
maloma99 said:
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.
Click to expand...
Click to collapse
hi maloma99
I need your help my lg g2 is bricked please,
i am trying to install D802 .tot file, my phone is already D802, but
the error is crossDL [] to [D802]

Related

[Q] Please HELP!!! L7-P705 keeps rebooting after unlocking bootloader

Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
ecapella said:
Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
Click to expand...
Click to collapse
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
vashminted said:
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
Click to expand...
Click to collapse
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
ecapella said:
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
Click to expand...
Click to collapse
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
vashminted said:
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
Click to expand...
Click to collapse
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
ecapella said:
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
Click to expand...
Click to collapse
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
vashminted said:
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
Click to expand...
Click to collapse
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
HELP
ecapella said:
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
Click to expand...
Click to collapse
i have the same problem with my l7 p705 i rooted it and then i installed CWM and then it started restarting every 2 minutes. so i thought maybe unrooting it would help but it didn't. please give me all the steps that you did so i can stop my phone from booting every 2 minutes.!!!
LG P705
My Phones says secure booting error Cause:boot certification verify i`m a newbie help me please ,
Lg Optimus L7 P705 Secure booting Error!
Hello everyone,
I'm from Turkey.
I have LG Optimus L7 P705.
My problem, to take root and Cyanogenmod. But phone is brick.
I have seen the error screen :
-Secure booting Error!
-Cause : boot certification verify
Help me !
Mail Adress 7/24 : [email protected]

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilĂ , like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

[Q] Bricked LG G2?? D-801 ( WIND ) HELPPP

Ok, hey guys, got myself in a really deep hole here i believe..
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
After the app rebooted the phone it went to the exact screen shown in the pic ...
now how can i get this phone working???, fastboot commands all work...
ive flashed a recovery but cant boot into it as the phone wont power off...
if anyone has any ideas , im open to all...
i do have the LG Flash tool available and a Custom ROM on hand
I do not have a stock file ..
Phone is rooted
Thanks for help , anything is great
Update ..
tried to flash a ROM as an Update.zip, get error back
also now get that screen when i hold all buttons down , not sure, never got that before
Shotgun4 said:
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
Click to expand...
Click to collapse
I did the exact same thing because the ****ing jokers at LG / Wind labeled the phone wrong.
It's actually a D803. Yeah, despite what it says on the case.
You can find my solution in my post history here.. You need to flash a .laf file with fastboot to get your download mode re-enabled, then you can apply a stock .kdz file to bring your phone back to stock.
Then use the D803 files and no worries! You can fix this.
If you're scared, I can also recommend a respectable shop in Toronto that can fix it easy.

[Q] My D803 (Bell) is a D801? WTH?

So long story short I screwed my phone up and had to use LG Flash Tool to make it work again. The weird thing is, when I tried to flash a D803 .TOT file the LG Flash Tool said "wrong phone model" or something along those lines. It then said "D801" was my phone model. I searched and searched and SEARCHED for Bell D801 and could only find people saying it's D803. Well, I said screw it and downloaded TMobile's D801 .TOT and flashed it. The phone works now but it has a TMobile boot animation. It still connects to Bell fine, but here's the main issue;
Part of my touchscreen doesn't work anymore and I'm still under warranty if I can just get the phone back to stock to have it sent in. How can I do this? Any help? Also, does flashing with the LG Flash Tool make it so LG can't see I ever rooted the phone?
Thanks!
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
danial.aw said:
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
Click to expand...
Click to collapse
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
cptnsmelly said:
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
Click to expand...
Click to collapse
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Funjet said:
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Click to expand...
Click to collapse
So are you saying there is no TOT? I cant get the kdz method to work... so i need a tot.
Ok so I typed my IMEI into some site and it said my phone is indeed a D803! However, because I flashed a TMobile .TOT to the phone, my phone thinks it's a D801. Oh god... How do I fix this now?
BUMP!
Hmm I'm not sure how you can go back but if you are within warranty you can try wrecking the system (so it doesn't work) and send it in for repair... They will reinstall a new version
Maybe your bootloader or whut was d801?? Idk but can you try to flash this kdz http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Canada+D803/
Then the one from bell? I hope its gonna be alright if you can flash it. Note that if you screw up with flashing then try not to wreck your system but try to repair it you itself since a system wreckage doesn't come fromself and lg doesnt need to pay the price to fix it. Even under warranty. I know lg screws up stuff but flashing is at own risk.
Edit: I sawmyour other thread so nvm.
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
cptnsmelly said:
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
Click to expand...
Click to collapse
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
wulsic said:
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
Click to expand...
Click to collapse
Thanks for the info, but how do I change the build prop? I tried the adb usb thing and I get "device closed"
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
cptnsmelly said:
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
Click to expand...
Click to collapse
Great to hear that it worked yes about that build.prop editing i wasn't clear sorry for that but good that it worked now.

Flashed Wrong TOT file in LG Flash Tools...HELP!

Hey guys, Need a little help. Have an LG G2 D800 ATT, I accidentally flashed the Tmobile D801 into the phone, now LG Flash Tools wont recognize my phone as a ATT when I try to flash the TOT file for it..I am still able to get into Download Mode, no recovery, phone starts up as T-Mobile, but no data works and every 5 mins it restarts... Any help will be gladly appreciate any help on this! Been trying to figure this out all night =(
Jstlouis1993 said:
Hey guys, Need a little help. Have an LG G2 D800 ATT, I accidentally flashed the Tmobile D801 into the phone, now LG Flash Tools wont recognize my phone as a ATT when I try to flash the TOT file for it..I am still able to get into Download Mode, no recovery, phone starts up as T-Mobile, but no data works and every 5 mins it restarts... Any help will be gladly appreciate any help on this! Been trying to figure this out all night =(
Click to expand...
Click to collapse
Hi did you fix your phone .
I have exactly the same problem.
safetaga said:
Hi did you fix your phone .
I have exactly the same problem.
Click to expand...
Click to collapse
I did fix the issue by changing the ATT TOT file using a HEX Editior to Verizon tags, So when using LG Flash Tools, It'll flash it. Then Root it, install ATT recovery, and flash an ATT rom using Cloudy Rom. Then back to LG Flash Tools to flash a completly stock ATT.
Only issue I'm still having is I lost my IMEI and didn't have one back up. There is a Tut on how to get it back using QSPT, but I'm currently looking for a professional to that job for me...Phone is normal everything work except for my Mobile data and cell service.
If anything I can show you the right direction where to edit the TOT file and etc..
http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251

Categories

Resources