[Q] Bricked LG G2?? D-801 ( WIND ) HELPPP - G2 Q&A, Help & Troubleshooting

Ok, hey guys, got myself in a really deep hole here i believe..
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
After the app rebooted the phone it went to the exact screen shown in the pic ...
now how can i get this phone working???, fastboot commands all work...
ive flashed a recovery but cant boot into it as the phone wont power off...
if anyone has any ideas , im open to all...
i do have the LG Flash tool available and a Custom ROM on hand
I do not have a stock file ..
Phone is rooted
Thanks for help , anything is great
Update ..
tried to flash a ROM as an Update.zip, get error back
also now get that screen when i hold all buttons down , not sure, never got that before

Shotgun4 said:
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
Click to expand...
Click to collapse
I did the exact same thing because the ****ing jokers at LG / Wind labeled the phone wrong.
It's actually a D803. Yeah, despite what it says on the case.
You can find my solution in my post history here.. You need to flash a .laf file with fastboot to get your download mode re-enabled, then you can apply a stock .kdz file to bring your phone back to stock.
Then use the D803 files and no worries! You can fix this.
If you're scared, I can also recommend a respectable shop in Toronto that can fix it easy.

Related

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help
same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery
ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.
I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking
Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you
Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] LG G2 bricked and can't flash stock firmware!

So I'm really into Android developing, I'm always flashing and installing etc, but I got a problem now.
Phone information​
LG G2 D802
Rooted
TWRP Recovery 2.7.0.0
Was running 4.4.2, found a kdz file on the internet and flashed it (no regular update from my phone)
What happened​I actually did something stupid, I received an application update from the LG Download Center (or whatever it's called) on my phone and clicked on it. I was planning on flashing Android 4.4.2 again because my firmware was not stable, and I thought this update could help me.
But no, after it finished downloading, I automatically booted into recovery.
What I did​So I tried to reboot and enter my OS, but unfortunately, I was stuck in recovery.
I did everything I could, wiping (Dalvik) cache, factory reset, flashed a new rom, restored Nandroid backup, but no, every time I booted, I got back into recovery again.
I only saw 1 option left, booting into download mode and flashing a new firmware.
I found the Netherlands 16GB kdz file for Android 4.4.2 (because I had a French one first), the one I was looking for.
Looked all over the internet, and all guides pointed me to this guide.
Tried it, but I got multiple errors, one of them was that my phone was not connected while I was at 15% of the flash process.
What happened​After that first flashing process, I booted up, but got a Security Error. After the Security Error was showing for 5 seconds, my phone shut down. This is happening every time I try to boot up.
I couldn't access my recovery anymore, nothing. Edit: I can access my recovery right now, and I tried this, but when I boot up I get the Security Error again.
The big problem right now is the Security Error! How do I bypass that?
So can someone please help me out!
Several phones/tablets of mine bricked and I always found a way to get out of it, but not this time, unfortunately...
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
XxZombiePikachu said:
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Yes, I actually have. Didn't mention it, but after I did that I booted and got an LG logo and below it was a text that said 'Security Error' After like 5 seconds the security error goes away and my phone shuts down. I can only enter download mode right now.
I'll edit my first post with this info.
Thanks for the help though!
Edit: I find a way to access my recovery again because at first I couldn't but I figured out that the code in the thread you linked was a bit different than the code I entered at first.
So I used the code you gave me, but now I get the Security Error again!
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
evilruck said:
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
Click to expand...
Click to collapse
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Ibrahim9999 said:
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Click to expand...
Click to collapse
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
evilruck said:
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
Click to expand...
Click to collapse
Thanks man! I'm probably going to save money because of you, awesome!
Ibrahim9999 said:
Thanks man! I'm probably going to save money because of you, awesome!
Click to expand...
Click to collapse
I hope so!
Let me know if you fix the thing :laugh:
evilruck said:
I hope so!
Let me know if you fix the thing :laugh:
Click to expand...
Click to collapse
I just managed to fix it! Thank you so much man!
Can someone help me plz I got flashily got CWM instead of the TWRP and got and lg update it updated and now it's stuck in recovery mode it won't go into download mode it only goes to recovery mode and my computer won't recognize my phone so if any one knows how to fix it can you plz help me out
my pc don't recognize the lg g2 in download mode!
i installed the drivers and the USB is connected but the pc don;t even say that the device is connected . and nothing in device manager at all
Perhaps you might consider sending it in to lg if you still have warranty. But I'd you don't, there are services on eBay/ Craigslist that can help you.
Sent from my LG-D800 using XDA Free mobile app

after stock, it still says rooted ?

owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
abati said:
owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
Click to expand...
Click to collapse
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
abati said:
owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
Click to expand...
Click to collapse
Don't worry
http://forum.xda-developers.com/showthread.php?t=2703501
thnx i will try that !
Vogie said:
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
Click to expand...
Click to collapse
hey men, i tried exactly what you said, but it stil the same after i flashed the kdz with CSE flash mode.
when i go back to download mode it stil says (user b97 - rooted in) i forgot to say that rooted is in red letters, does that say annything ? i am bit confused
abati said:
hey men, i tried exactly what you said, but it stil the same after i flashed the kdz with CSE flash mode.
when i go back to download mode it stil says (user b97 - rooted in) i forgot to say that rooted is in red letters, does that say annything ? i am bit confused
Click to expand...
Click to collapse
Let me know, did you download KDZ ROM from http://lg-firmware-rom.com ?
You have to enter your IMEI to get you download link. It's a kdz file with around 1.6 Gigabytes.
Right?
Vogie said:
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
Click to expand...
Click to collapse
Vogie said:
Let me know, did you download KDZ ROM from http://lg-firmware-rom.com ?
You have to enter your IMEI to get you download link. It's a kdz file with around 1.6 Gigabytes.
Right?
Click to expand...
Click to collapse
yes that is correct
abati said:
yes that is correct
Click to expand...
Click to collapse
It doesn't make sense!
Stocks KDZ will make your phone like first day and repartition all partitions.
CES mode should works and Its delete all of your files.
BTW, It's just way I know to back to completely stock ROM.
Try again maybe works.
Vogie said:
It doesn't make sense!
Stocks KDZ will make your phone like first day and repartition all partitions.
CES mode should works and Its delete all of your files.
BTW, It's just way I know to back to completely stock ROM.
Try again maybe works.
Click to expand...
Click to collapse
i totally agree with you, but i already tried more then once.
I remeber that around 3 months ago i flashed an official kdz file and i tried to install root and recovery but it kept failing, so i installed an app called autrec and this app fixed everything .
Could this thing cause the problem ?
No, autorec just install recovery.
LG flash tools 2014 flash lg's recovery from KDZ file.
Vogie said:
No, autorec just install recovery.
LG flash tools 2014 flash lg's recovery from KDZ file.
Click to expand...
Click to collapse
i have also to mention, each time i went back to stock kdz i installed root checker, and the app kept saying root is not properly installed blabla, realy weird.
and yes i always used lg flash tools 2014 but nothing changes
abati said:
i have also to mention, each time i went back to stock kdz i installed root checker, and the app kept saying root is not properly installed blabla, realy weird.
and yes i always used lg flash tools 2014 but nothing changes
Click to expand...
Click to collapse
Hello abati.
The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat. You can manually replace some files (rct.config), but even though it shows ROOTED in download mode, it isn't unless you manually rooted it after flashing a kdz.
If you're thinking of sending the phone in for a repair, I recall hearing that it doesn't have any effect at all.
But if it really bothers you that much you can flash a Jelly Bean ROM kdz (4.2.2) and UNROOTED will appear in dowload mode or just replace the files. But it has no practical value since your phone is not rooted.
Hope this helps!
vPro97 said:
Hello abati.
The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat. You can manually replace some files (rct.config), but even though it shows ROOTED in download mode, it isn't unless you manually rooted it after flashing a kdz.
If you're thinking of sending the phone in for a repair, I recall hearing that it doesn't have any effect at all.
But if it really bothers you that much you can flash a Jelly Bean ROM kdz (4.2.2) and UNROOTED will appear in dowload mode or just replace the files. But it has no practical value since your phone is not rooted.
Hope this helps!
Click to expand...
Click to collapse
thnx m8, i was about to flash a jb rom actualy and see if it will change ^^ i will report back
abati said:
thnx m8, i was about to flash a jb rom actualy and see if it will change ^^ i will report back
Click to expand...
Click to collapse
It will change make sure you download and flash the correct model and storage (16 GB or 32 GB).
Also, it's easier to press thanks button than to say thanks - unless you're out of thanks for today, like I am
vPro97 said:
It will change make sure you download and flash the correct model and storage (16 GB or 32 GB).
Also, it's easier to press thanks button than to say thanks - unless you're out of thanks for today, like I am
Click to expand...
Click to collapse
hey m8 what you said is right, i flashed a kdz (D80210A_00) but it acted strangely cuz it kept rebooting and I then shutdown the phone with a combination of the buttons and then powered on but it kept rebooting. eventualy i checked in the download mode and there it said unrooted in white text.
eventualy i went back to kdz (D80220H_00) kitkat rom, and i factory reset everything and downloaded root checker, root checker says LG g2 device is not rooted. But when i went back to download mode and just see what it said ^^
It says rooted men -_- realy disturbing
did LG do this intentialy ? cuz if i am going to send tis device for repair the chance is very high that they will charge me the cost for the repair because my phone shows that i rooted.
how should i deal with this
abati said:
hey m8 what you said is right, i flashed a kdz (D80210A_00) but it acted strangely cuz it kept rebooting and I then shutdown the phone with a combination of the buttons and then powered on but it kept rebooting. eventualy i checked in the download mode and there it said unrooted in white text.
eventualy i went back to kdz (D80220H_00) kitkat rom, and i factory reset everything and downloaded root checker, root checker says LG g2 device is not rooted. But when i went back to download mode and just see what it said ^^
It says rooted men -_- realy disturbing
did LG do this intentialy ? cuz if i am going to send tis device for repair the chance is very high that they will charge me the cost for the repair because my phone shows that i rooted.
how should i deal with this
Click to expand...
Click to collapse
Like vPro97 said, "The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat".
I suggest installing the Stock Jelly Bean .kdz file for your device, and then upgrading to KitKat ONLY via OTA.
d00lz said:
Like vPro97 said, "The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat".
I suggest installing the Stock Jelly Bean .kdz file for your device, and then upgrading to KitKat ONLY via OTA.
Click to expand...
Click to collapse
But when i flashh jb kdz it keeps rebooting, totally nonsense if you ask me, but when i hold power and volume down for a couple sec. then the phone shuts down, after that i pressed the power butten but it still kept rebooting. I was able to enter the download mode and see for my self that it showed that it was not rooted, but besides that the phone always keeps rebooting.
After I flashed the kdz based on kitkat, i did not had anny problem at all, except that download mode shows that im rooted when in realtime its not.
abati said:
But when i flashh jb kdz it keeps rebooting, totally nonsense if you ask me, but when i hold power and volume down for a couple sec. then the phone shuts down, after that i pressed the power butten but it still kept rebooting. I was able to enter the download mode and see for my self that it showed that it was not rooted, but besides that the phone always keeps rebooting.
After I flashed the kdz based on kitkat, i did not had anny problem at all, except that download mode shows that im rooted when in realtime its not.
Click to expand...
Click to collapse
Hello again. Sorry for the delay, was busy reading!
After flashing a jelly bean KDZ you need to perform a hard reset if it bootloops.
Just press and hold volume down and power button till lg logo pops up, then release the buttons and then immediately press and hold volume down and power button again. Then follow the instructions.
If you flashed the correct file, you'll get an OTA update to kitkat
.
vPro97 said:
Hello again. Sorry for the delay, was busy reading!
After flashing a jelly bean KDZ you need to perform a hard reset if it bootloops.
Just press and hold volume down and power button till lg logo pops up, then release the buttons and then immediately press and hold volume down and power button again. Then follow the instructions.
If you flashed the correct file, you'll get an OTA update to kitkat
.
Click to expand...
Click to collapse
No problem MEN !!
Damnn your a Hero ^^ it worked !!

Touch not working after flashing stock ROM

Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Meppolan said:
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Click to expand...
Click to collapse
Thanx
The phone was sold as NEW and not Refr.
It was in Genuine box, with Genuine Chrager (and even manual)
Though it might be fraud...
I talked to the seller, and i am sending it back to him
Hopefully he will fix it/replace it
If not i will send him you link..
I think i'm having exactly the same problem with you T_T
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
[email protected] said:
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
Click to expand...
Click to collapse
You can flash with the TOT, you just need to edit the TOT file in a Hex editor and change the model to what you have (LS980). Look at my post here on how to do that.

TWRP failed to install

very frustrated
nothing seems to work...
i rooted my LG g2 D801
with the all in one toolkit
i can use ADB and communicate with the
phone
so i followed this
http://forum.xda-developers.com/showthread.php?t=2449670
used option 2
file were pushed and all seems ok
so i use quick boot app to reboot in to recovery
and i get
black screen with small white fonts on top left that says
Secure boot error
cause : boot certification error.
then
white screen with black characters
Critical error
------------------------
DemiGod crash handler : Critical Error!
press key to choose dload mode or reboot.
1) volume up : dload mode
2) volume down : reboot
if you choose dload mode ,
please do following action .
1) dload mode , connect usb
2) get the ram dump image using QPST configuration
------------------------------------------
Same thing if i use flashify
to try install the TWRP.IMG
that i Downloaded or downloaded from flashify
besides
i cant use AutoRec as the screen dont respond to the touchscreen
i followed intruction to downgrade super Su to 2.46 but still
touchscreen dont work on Autorec...
this is not easy as it seems...
can some one help please
i am so depressed about this
Max.
UPDATE....
since i am on LP looks like i need the hybrid bootstack
from DanielStuart
so you need a 4.4 kit kat stack in order to load TWRP
?? Right ?
thing is how to flash the .zip file i just downloaded from the DanielS site for the D801
Tou should have used autorec
Sent from my LG-LS980 using Tapatalk
devil ££ sama said:
Tou should have used autorec
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
I tried autorec
but the damn thing dont response to keypress on the screen
maxolini said:
I tried autorec
but the damn thing dont response to keypress on the screen
Click to expand...
Click to collapse
Also
i tried to boot in to bootloader mode to use fastboot
to push the TWRP.img in
and... nothing
when i use the command
adb reboot bootloader
i just reboots my phone normally into home screen
maxolini said:
very frustrated
nothing seems to work...
i rooted my LG g2 D801
with the all in one toolkit
i can use ADB and communicate with the
phone
so i followed this
http://forum.xda-developers.com/showthread.php?t=2449670
used option 2
file were pushed and all seems ok
so i use quick boot app to reboot in to recovery
and i get
black screen with small white fonts on top left that says
Secure boot error
cause : boot certification error.
then
white screen with black characters
Critical error
------------------------
DemiGod crash handler : Critical Error!
press key to choose dload mode or reboot.
1) volume up : dload mode
2) volume down : reboot
if you choose dload mode ,
please do following action .
1) dload mode , connect usb
2) get the ram dump image using QPST configuration
------------------------------------------
Same thing if i use flashify
to try install the TWRP.IMG
that i Downloaded or downloaded from flashify
besides
i cant use AutoRec as the screen dont respond to the touchscreen
i followed intruction to downgrade super Su to 2.46 but still
touchscreen dont work on Autorec...
this is not easy as it seems...
can some one help please
i am so depressed about this
Max.
UPDATE....
since i am on LP looks like i need the hybrid bootstack
from DanielStuart
so you need a 4.4 kit kat stack in order to load TWRP
?? Right ?
thing is how to flash the .zip file i just downloaded from the DanielS site for the D801
Click to expand...
Click to collapse
i think you dont need anyhting if on KK but you could try this bootstacks
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
theres autorec for KK and autorec for lollipop di you use the correct one?
raptorddd said:
i think you dont need anyhting if on KK but you could try this bootstacks
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
theres autorec for KK and autorec for lollipop di you use the correct one?
Click to expand...
Click to collapse
Hi! i recently got a LG G2 D800 AT&T model and immediately rooted it with stump root...but after that while flashing recovery i tried to use auto rec but it didnt work for me...so i tried TWRP manager and installed twrp its says recovery flashed succesfully. But whenever i boot in to recovery it shows the LG logo and in the top left corner it says secure boot error in white text can you please help me with this? im really stuck and dont know what to do as i want to flash cm13. thanks.
rohan1310 said:
Hi! i recently got a LG G2 D800 AT&T model and immediately rooted it with stump root...but after that while flashing recovery i tried to use auto rec but it didnt work for me...so i tried TWRP manager and installed twrp its says recovery flashed succesfully. But whenever i boot in to recovery it shows the LG logo and in the top left corner it says secure boot error in white text can you please help me with this? im really stuck and dont know what to do as i want to flash cm13. thanks.
Click to expand...
Click to collapse
i would suggest to go back to stock and start from scratch othe wise youll end up with hard brick..
follow this for d800.
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
maxolini said:
i cant use AutoRec as the screen dont respond to the touchscreen
Click to expand...
Click to collapse
Autorec is damn slow and has no progress bar. While its gathering device infos it won't ever respond. Be patient and when Autorec finished gathering it will work. Good luck!
raptorddd said:
i would suggest to go back to stock and start from scratch othe wise youll end up with hard brick..
follow this for d800.
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
Click to expand...
Click to collapse
Yes sir... Followed the same flashed back to stock using lg flash tools and then repeated the process and voila I'm now running on cyanogenmod 13 snapshot build....Thanks a lot..btw if you're on cm13 have you tested out the latest nightly....is it better and bug free or should i keep using the snapshot build....its very smooth but i just find the battery consumption to be a bit high.. Anyways thanks a lot for your help...
rohan1310 said:
Yes sir... Followed the same flashed back to stock using lg flash tools and then repeated the process and voila I'm now running on cyanogenmod 13 snapshot build....Thanks a lot..btw if you're on cm13 have you tested out the latest nightly....is it better and bug free or should i keep using the snapshot build....its very smooth but i just find the battery consumption to be a bit high.. Anyways thanks a lot for your help...
Click to expand...
Click to collapse
just hit the thanks button..:good:
good that you are all set up.. i not on cm am on stock rom..
so i have no idea... i have flashed blisspop and liquid dark.. but uninstalled next day it gave erros. like not booting. and bisspop. when i tried 5.1.1 volume was so low. i think they fixed it now.
Jan Philipp said:
Autorec is damn slow and has no progress bar. While its gathering device infos it won't ever respond. Be patient and when Autorec finished gathering it will work. Good luck!
Click to expand...
Click to collapse
I get the pop ups that says finished gathering information and backup complete
still i waited 5 minutes ( lol... yess too long.. but just to make sure )
and press the screen... NOTHING!!!!
so i will think will flask stock
but KK
right ?
i already downloaded d801v20g00.kdz
and im now that one stock
BTW,
a friend of mine just got a NEXUS 5 and the camera sux
very grainy in marginal light, suppose to be very similar to the G2 but no!
G2 is way better camera
also i have read somehwere that you can install another camera package from the G3 or G4
if i an not mistaken and that is better than the stock G2 camera
The better the algorithms to render a JPG from the RAW DATA of the chip camera sensor
the best the pic looks
is XCAM the one ?
Well, im back to stock d801v20g
i am planning to install Cloudy v3 or CM13
any recomendation ?
i heard XCAM only work with stocks
so... tough decisions
maxolini said:
I get the pop ups that says finished gathering information and backup complete
still i waited 5 minutes ( lol... yess too long.. but just to make sure )
and press the screen... NOTHING!!!!
so i will think will flask stock
but KK
right ?
i already downloaded d801v20g00.kdz
and im now that one stock
BTW,
a friend of mine just got a NEXUS 5 and the camera sux
very grainy in marginal light, suppose to be very similar to the G2 but no!
G2 is way better camera
also i have read somehwere that you can install another camera package from the G3 or G4
if i an not mistaken and that is better than the stock G2 camera
The better the algorithms to render a JPG from the RAW DATA of the chip camera sensor
the best the pic looks
is XCAM the one ?
Well, im back to stock d801v20g
i am planning to install Cloudy v3 or CM13
any recomendation ?
i heard XCAM only work with stocks
so... tough decisions
Click to expand...
Click to collapse
for camera use xcam.. only works on stock or roms based on stock no aosp or cm...
for raw use freedcam..
for rom i recommend icex rom.. its stock..

Categories

Resources