Hardbrick Wi-Fi+SIM Problem - OnePlus 2 Q&A, Help & Troubleshooting

Hi, I had hardbrick, I back to stock by download tool but now Wi-Fi and SIM doesn't works...any idea;(
Wysłane z mojego ONE A2003 przy użyciu Tapatalka

Check your IMEI.

kudzo said:
Check your IMEI.
Click to expand...
Click to collapse
IMEI is gone
do this, i have that too.
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Click to expand...
Click to collapse

IMEI Gone , erase modemst1 and modemst2 should fix the problem? I will try do that...

RevUnix said:
IMEI is gone
do this, i have that too.
Click to expand...
Click to collapse
You are a God!!! your faq repaired my phone. Thank's!!

lukaszlol1990 said:
You are a God!!! your faq repaired my phone. Thank's!!
Click to expand...
Click to collapse
Nice that it works again. :good:

RevUnix said:
IMEI is gone
do this, i have that too.
Click to expand...
Click to collapse
Got IMEI for sim 1, IMEI for sim 2 is still missing
Any help?

tbiwalkar said:
Got IMEI for sim 1, IMEI for sim 2 is still missing
Any help?
Click to expand...
Click to collapse
First what you must do is back to stock 100% by download tool, after this please unlock bootloader and erase modem1 and modem2, that must repair your phone and imei numbers must back
Wysłane z mojego ONE A2003 przy użyciu Tapatalka

How to erase modem1 and modem 2?
fastboot erase modem st1 and fastboot erase modemst2?
I already tried that

anyone can share your backup of modemst1 & modemst2 please? @lukaszlol1990 @RevUnix @kudzo
thanks..

Related

Please Closed... / Lost IMEI

Hello.
my DROID Turbo Lost IMEI...
The cause was me, but did the following operation.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot erase mdm1m9kefs3
fastboot erase mdm1m9kefsc
The reasons that performed this are as follows.
When I reset NV with past Motorola device, I deleted efs (modemst1/modemst2)
I did a thing similar to it....
After having carried it out, it was understood, but the content of the partition seems to be as follows.
mdm1m9kefs1 = modemst1
mdm1m9kefs2 = modemst2
mdm1m9kefs3 = fsg.mbn
mdm1m9kefsc = ?
by the above,,, I want mdm1m9kefs3(fsg.mbn) and mdm1m9kefsc
fsg.mbn is always in official motorola firmware, but does not into the thing of quark which I downloaded
Te methods to take out are as follows
※req rooted
Code:
adb shell
su
# dd if=/dev/block/mmcblk0p31 of=/sdcard/p31
# dd if=/dev/block/mmcblk0p32 of=/sdcard/p32
exit
adb pull /sdcard/p31
adb pull /sdcard/p32
thanks ;(
sorry.....
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------
fnoji111 said:
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------
Click to expand...
Click to collapse
imei number 0000 or null ???
cascade128 said:
imei number 0000 or null ???
Click to expand...
Click to collapse
null.
fnoji111 said:
null.
Click to expand...
Click to collapse
How did you fix it?
cascade128 said:
How did you fix it?
Click to expand...
Click to collapse
He flashed radio.img which restored the partitions and his IMEI.
Steve-x said:
He flashed radio.img which restored the partitions and his IMEI.
Click to expand...
Click to collapse
I tried, imei number still null
????
how they lost their imei, we was doing?
cascade128 said:
I tried, imei number still null
Click to expand...
Click to collapse
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fnoji111 said:
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
Click to expand...
Click to collapse
No, my device XT1254

WiFi doesn't work after flash MM

Hi, I have a x force from iusacel Mexico, and it came with 5.1 Android, I've tried flash all the MM firmwares but after that all came OK except by WiFi, lte works, sim works, all works but WiFi keeps off.
Does anybody have the solution? Or I have to keep 5.1 untill my carrier release MM?
Tnx
Enviado desde mi XT1580 mediante Tapatalk
dashiell_cano said:
Hi, I have a x force from iusacel Mexico, and it came with 5.1 Android, I've tried flash all the MM firmwares but after that all came OK except by WiFi, lte works, sim works, all works but WiFi keeps off.
Does anybody have the solution? Or I have to keep 5.1 untill my carrier release MM?
Tnx
Enviado desde mi XT1580 mediante Tapatalk
Click to expand...
Click to collapse
If you have unlocked your bootloader, you can't expect an OTA, so you have to flash manually any firmware. Your issue seems módem related, did you flash the módem when you flashed the firmware? You have to flash the following commands after the sparsechunk:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash fsg fsg.mbn
Then erase userdata and stuff.
MuyKurioso said:
If you have unlocked your bootloader, you can't expect an OTA, so you have to flash manually any firmware. Your issue seems módem related, did you flash the módem when you flashed the firmware? You have to flash the following commands after the sparsechunk:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash fsg fsg.mbn
Then erase userdata and stuff.
Click to expand...
Click to collapse
Tnx I've already did that but no success
Enviado desde mi XT1575 mediante Tapatalk
dashiell_cano said:
Tnx I've already did that but no success
Enviado desde mi XT1575 mediante Tapatalk
Click to expand...
Click to collapse
Did u wipe data?
MuyKurioso said:
Did u wipe data?
Click to expand...
Click to collapse
Yep, every time did a clean flash, my last try was even flash mm then modem from lollipop like I did in another moto phones and nothing.
Enviado desde mi XT1580 mediante Tapatalk

i Have fastboot erase modem modemst1 modemst2 and i don't have backup

i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
saifo11 said:
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
Click to expand...
Click to collapse
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
sasukay said:
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
Click to expand...
Click to collapse
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
saifo11 said:
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
Click to expand...
Click to collapse
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
EFS_Lenovo_A6000.qcn
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
EFS_Lenovo_A6000.qcn does this file need to be flashed
saifo11 said:
EFS_Lenovo_A6000.qcn does this file need to be flashed
Click to expand...
Click to collapse
No, actually I didn't created the zip and I don't know what it contained. But, as the zip name suggests, "modem and stuff", I thought it would contain the modemst1/st2 .bin files; and didn't know what else it would contain. So, you just have to flash the modemst1/st2 files and not any others. But, in case, you lost your IMEI too, after flashing the files; I suggested that thread to help you out with it.
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
the post you provided worked thanks alot
what is this for? will this fix the bad signal on my carbon kitkat rom?
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Hello Sasukay..
Can you pls provide the link for downloading the modem files for lenovo k3 note. Or will this same file fix my network issues??
shamanth_gowda said:
Can you pls provide the link for downloading the modem files for lenovo k3 note.
Click to expand...
Click to collapse
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
sasukay said:
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
Click to expand...
Click to collapse
The link you provided is not opening
shamanth_gowda said:
The link you provided is not opening
Click to expand...
Click to collapse
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
sasukay said:
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
Click to expand...
Click to collapse
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
shamanth_gowda said:
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
Click to expand...
Click to collapse
I have K6 Power (K33A42) and also erased the modemst1 and -st2 parts. Could anybody share his backup of modemst1?
Flashing newest stock ROM did not helped.
Please...
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
doswar said:
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
Click to expand...
Click to collapse
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
mL-7 said:
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
Click to expand...
Click to collapse
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
sasukay said:
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
Click to expand...
Click to collapse
sorry for mistake it's qcn but where I can get drivers
doswar said:
sorry for mistake it's qcn but where I can get drivers
Click to expand...
Click to collapse
Qualcomm USB drivers
Was just a google search away.
sasukay said:
Qualcomm USB drivers
Was just a google search away.
Click to expand...
Click to collapse
Thank you

[Guide] relock bootloader, go back to stock rom and get OTA's (automatic)

DISCLAIMER
Not taking responsibility if it goes wrong
We have found a way to get back to stock, and relock the bootloader! for now, it only works for the XT-1635-02 because we dont have a signed stock image for any other phone model.
you can use this on any software channel!
How it works.
YOU NEED TO BE ON A CUSTOM ROM TO RELOCK THE BOOTLOADER!
There are 2 ways to install the stock firmware.
Easiest way is using the .bat files
1 - Connect you phone with a cable and go to the bootloader
2- place all the files in adb fastboot folder
3 - use the .bat files and everything will be installed
Second way
1 - Download Stock ROM in the first post down below
2 - install adb minimal fastboot
3 - after install adb minimal fastboot, go to the install location and paste all the files there
5 - Copy all commands how is in this site and past it on the cmd screen and wait. (you need to press enter for the last command)
Commands
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash boot boot.img
fastboot oem lock
Now youre phone will reboot, and your phone is locked again.
All downloads
XT-1635-01
XT-1635-02
https://www.androidfilehost.com/?fid=818070582850489228
XT-1635-03
It actually works. Flawlessly.
Thanks man :')
Greate news !!! More confirmations please
---------- Post added at 04:18 PM ---------- Previous post was at 04:09 PM ----------
AmulyaX said:
It actually works. Flawlessly.
Thanks man :')
Click to expand...
Click to collapse
All works , like on stock rom ? OTA works ?
Yeah, everything works
Great news!
Are you able to use Android Pay?
Tks
What software channel would the phone get if i flash this?
rodrigo9411 said:
What software channel would the phone get if i flash this?
Click to expand...
Click to collapse
the same as before
dpavani said:
Great news!
Are you able to use Android Pay?
Tks
Click to expand...
Click to collapse
yes
So under link is signed rom for MZP?
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Does it bring back warranty? I mean warranty in shop, not in Motorola's service (I guess it's impossible to bring back Motorola's warranty). Is the bootloader's status code "locked" as factory new, or "relocked"?
sebx_g1 said:
So under link is signed rom for MZP?
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Widzę po sygnaturze, że polak witam. Gdzie kupiłeś motkę? Ja w x-komie.
sebx_g1 said:
So under link is signed rom for MZP?
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yeah
Very cool to be able to do this and may come in handy down the track.
Query though, if you re-lock the bootloader, is it possible to subsequently unlock it again having already gone through the getting of codes from the motorolla site??
astmacca said:
Very cool to be able to do this and may come in handy down the track.
Query though, if you re-lock the bootloader, is it possible to subsequently unlock it again having already gone through the getting of codes from the motorolla site??
Click to expand...
Click to collapse
Important question... And could somebody do mirrors of this signed software because Lenovo moto could block it [emoji848]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Chydzim said:
Does it bring back warranty? I mean warranty in shop, not in Motorola's service (I guess it's impossible to bring back Motorola's warranty). Is the bootloader's status code "locked" as factory new, or "relocked"?
Widzę po sygnaturze, że polak witam. Gdzie kupiłeś motkę? Ja w x-komie.
Click to expand...
Click to collapse
its says its oem locked
astmacca said:
Very cool to be able to do this and may come in handy down the track.
Query though, if you re-lock the bootloader, is it possible to subsequently unlock it again having already gone through the getting of codes from the motorolla site??
Click to expand...
Click to collapse
i have no idea, we could test it.
sebx_g1 said:
Important question... And could somebody do mirrors of this signed software because Lenovo moto could block it [emoji848]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
i will upload one to my dropbox private
its working fine my mobile, save life
talktosam said:
its working fine my mobile, save life
Click to expand...
Click to collapse
Nice
may be we can add all command in one xml file, i saw one video in
this method we can apply for one click

Help IMEI 00 & IMEI SV 0

Hello friends, well, I have a problem with my moto g5 plus, the IMEI is at 0 and the IMEI SV is also at 0, I already tried the Pixel experience 8.1.0 method and nothing, also other methods that I have seen on the internet but both IMEI follow in 0, any solution to the problem?
I would appreciate it
DrakonMann said:
Hello friends, well, I have a problem with my moto g5 plus, the IMEI is at 0 and the IMEI SV is also at 0, I already tried the Pixel experience 8.1.0 method and nothing, also other methods that I have seen on the internet but both IMEI follow in 0, any solution to the problem?
I would appreciate it
Click to expand...
Click to collapse
Have you ever flashed someone else's persist file?
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
Have you ever flashed someone else's persist file?
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
DrakonMann said:
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
Click to expand...
Click to collapse
Try flashing from from stock firmware
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
sd_shadow said:
Try flashing from from stock firmware
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
I tried and it didn't work :/
DrakonMann said:
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
Click to expand...
Click to collapse
In this case you're most probably screwed if you don't have a backup of your own persist file.
All infos about this problem can be found here. @NZedPred who made that thread is the man to ask but do not have to much hope.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
In this case you're most probably screwed if you don't have a backup of your own persist file.
All infos about this problem can be found here. @NZedPred who made that thread is the man to ask but do not have to much hope.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
**** man, i dont have backup of my efs & persist, well, i check this thread, thnks man.

Categories

Resources