Related
I have nexus 4 with android 4.4.2. I just root my device and now i am not able to switch to ART. It is giving me option to select runtime and i did select ART and the phone reboots and after reboot it is back to Dalvik.
Can anybody suggest me what to do??
samvid1992 said:
I have nexus 4 with android 4.4.2. I just root my device and now i am not able to switch to ART. It is giving me option to select runtime and i did select ART and the phone reboots and after reboot it is back to Dalvik.
Can anybody suggest me what to do??
Click to expand...
Click to collapse
Although the option is present, it doesn't mean that the rom actually can utilize ART. I forget the exact term, and/or which is which, but it depends on if the rom is deodexed or odexed.
Sent from my Nexus 7 (2013)
do you have xposed?
opssemnik said:
do you have xposed?
Click to expand...
Click to collapse
No, I tend to steer clear of kernels.
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
No, I tend to steer clear of kernels.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
xposed framework is a mod,well it looks like you dont have so. do you have any root required app(apps that require/use root)
opssemnik said:
xposed framework is a mod,well it looks like you dont have so. do you have any root required app(apps that require/use root)
Click to expand...
Click to collapse
Yes, I'm rooted and have an app or two that requires root.
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
Yes, I'm rooted and have an app or two that requires root.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
opssemnik said:
xposed framework is a mod,well it looks like you dont have so. do you have any root required app(apps that require/use root)
Click to expand...
Click to collapse
opssemnik said:
do you have xposed?
Click to expand...
Click to collapse
Berrydroidcafe said:
Although the option is present, it doesn't mean that the rom actually can utilize ART. I forget the exact term, and/or which is which, but it depends on if the rom is deodexed or odexed.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
I am running stock android and i have xposed framework installed(i have also installed advanced power menu and enable batterystats permission) and titanium backup root. No other root apps have been installed.
samvid1992 said:
I am running stock android and i have xposed framework installed(i have also installed advanced power menu and enable batterystats permission) and titanium backup root. No other root apps have been installed.
Click to expand...
Click to collapse
Xposed and all its modules are not compatible with ART. That's it keeps changing back to dalvik. Get rid of xposed and you can use ART.
arffrhn said:
Xposed and all its modules are not compatible with ART. That's it keeps changing back to dalvik. Get rid of xposed and you can use ART.
Click to expand...
Click to collapse
I did remove xposed framework and all its modules but still not able to switch to ART.
samvid1992 said:
I did remove xposed framework and all its modules but still not able to switch to ART.
Click to expand...
Click to collapse
even if u remove the mod is still there, you need to reinstall rom or use the uninstaller
opssemnik said:
even if u remove the mod is still there, you need to reinstall rom or use the uninstaller
Click to expand...
Click to collapse
I did reinstall the app and went to framework->uninstall and then uninstalled the app from setting. After reboot i was able to switch to art.
samvid1992 said:
I did reinstall the app and went to framework->uninstall and then uninstalled the app from setting. After reboot i was able to switch to art.
Click to expand...
Click to collapse
thats the uninstaller.
glad it worked .
opssemnik said:
thats the uninstaller.
glad it worked .
Click to expand...
Click to collapse
thanks for the help and information
samvid1992 said:
thanks for the help and information
Click to expand...
Click to collapse
you are welcome.but dont get me rude. this was a really dumb topic.its cleared stated on xposed topic that it switches back to dalvik when u change to art...
http://prntscr.com/2hhplq
opssemnik said:
you are welcome.but dont get me rude. this was a really dumb topic.its cleared stated on xposed topic that it switches back to dalvik when u change to art...
http://prntscr.com/2hhplq
Click to expand...
Click to collapse
It was my mistake. I just took the application without actually reading about and installed it.
Hello,
My Greenify app doesn't hibarnate apps automatically for some reason, thought everything is correct with the permissions in the SuperSu and in the Greenify app itself...
Does anybody know what might be the cause for such thing?
Create a shortcut and just press it whenever you want to hibernate takes less than 1 second lol
Sent from my SM-N9005 using XDA Premium 4 mobile app
speedyjay said:
Create a shortcut and just press it whenever you want to hibernate takes less than 1 second lol
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's what I'm doing now, but sometimes I forget to do so, and it's a pain in the ***....
raied115 said:
That's what I'm doing now, but sometimes I forget to do so, and it's a pain in the ***....
Click to expand...
Click to collapse
Check if auto hibernation is not disabled. Enable it.
You can also install the app and also clear cache.
deom2i said:
Check if auto hibernation is not disabled. Enable it.
You can also install the app and also clear cache.
Click to expand...
Click to collapse
It's checked...
Cleared cache and still no luck :\
Try becoming a beta tester, 2.3 is in beta status. Also xposed framework makes it possible for greenify to have a few extra features.
raied115 said:
Hello,
My Greenify app doesn't hibarnate apps automatically for some reason, thought everything is correct with the permissions in the SuperSu and in the Greenify app itself...
Does anybody know what might be the cause for such thing?
Click to expand...
Click to collapse
I'm having this problem too, and it's just recent. Either that, or I haven't been paying attention. It's been working just fine for almost a year on my Nexus 4. I wonder if it's specific to our phone?
PlutoDelic said:
Try becoming a beta tester, 2.3 is in beta status. Also xposed framework makes it possible for greenify to have a few extra features.
Click to expand...
Click to collapse
Extra features like what? And do I install the beta version?
ajm786 said:
I'm having this problem too, and it's just recent. Either that, or I haven't been paying attention. It's been working just fine for almost a year on my Nexus 4. I wonder if it's specific to our phone?
Click to expand...
Click to collapse
That's what we're here to find out, aren't we?
Sent from my SM-N900 using Tapatalk
Go update to the latest 2.3.1 version thru playstore. It seems more stable now than the 2.3 which goes haywire at times.
raied115 said:
Extra features like what? And do I install the beta version?
Click to expand...
Click to collapse
oasisfeng said:
Download [STABLE VERSION] & [DONATION PACKAGE]
Join [G+ community] or [Google Group] then [OPT-IN] to receive beta version directly from Google Play. (You will get 404 error without first joining community or group)
[Downloadable recent beta APKs]
Click to expand...
Click to collapse
Follow the Quote above...if you want the extra features, they are still visible under the settings in Greenify, but are grayed-out due to no Xposed Framework installed.
Together with Xposed, i am hitting 2 days and 20 hours on every cycle with 3 to 4 hours screen time.
Julian Jeremiah said:
Go update to the latest 2.3.1 version thru playstore. It seems more stable now than the 2.3 which goes haywire at times.
Click to expand...
Click to collapse
I updated yesterday. I noticed that apps that previously were not automatically hibernating are now.
Yes that's because latest 2.6 Xposed causes it to break the coding of greenify system but it was fixed with the updates.
ajm786 said:
I updated yesterday. I noticed that apps that previously were not automatically hibernating are now.
Click to expand...
Click to collapse
Julian Jeremiah said:
Yes that's because latest 2.6 Xposed causes it to break the coding of greenify system but it was fixed with the updates.
Click to expand...
Click to collapse
Updated my Xposed and still no luck.....
Sent from my SM-N900 using Tapatalk
You've to update your greenify
raied115 said:
Updated my Xposed and still no luck.....
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Julian Jeremiah said:
You've to update your greenify
Click to expand...
Click to collapse
Sure did, 2.3.1 build 11.
Sent from my SM-N900 using Tapatalk
I am on the most recent version and auto hibernation still didn't work for me
Sent from my VS980 4G using XDA Premium 4 mobile app
My greenyfe workin fine.
Sent from my SM-N9005 using XDA Premium 4 mobile app
I have the same problem, apps seem to stay in the "pending" list unless I hibernate them manually. Auto hibernation is enabled.
I have a Nexus5, stock Android + franco kernel, Greenify 2.4beta15 and xposed 2.6.1. Also have superSU.
If I check my superSU logs I can see that Greenify doesn't make any requests by itself.
Has there been found any solutions yet?
Managed to get it to work by downloading the latest beta version (2.4 beta17).
raied115 said:
Updated my Xposed and still no luck.....
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
I instal Automateit , its a apk similar like tasker, and make rule to autohibernate every 1 hour. try it.
Hello,
I do not find which version of Xposed I should install on 2.2.0 to have access on app permission ?
My Google Play Service is pumping too much battery, and I would like to remove some permission, as "keep awake" ....
If someone could point me in right direction ?
Thanks
To avoid battery draining from Google Play services, I recommend getting the donator version of Amplify.
With Amplify you can block Wakelocks and Alerts for specific amout of times.
There is a huge thread about this here:
http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
Xposed does not give you app permission access on its own - it is merely a framework. As far as which version of Xposed the OP2 uses, install SDK22 for the ARM64.
Once you have that, download, install, and activate Amplify in Xposed, then go read the topic linked by @GerRudi.
ChefChaudart said:
Hello,
I do not find which version of Xposed I should install on 2.2.0 to have access on app permission ?
My Google Play Service is pumping too much battery, and I would like to remove some permission, as "keep awake" ....
If someone could point me in right direction ?
Thanks
Click to expand...
Click to collapse
Doesn't the oxygen ROM itself can manage app permissions in the settings?!?
Sent from my ONE A2001 using Tapatalk
omidz said:
Doesn't the oxygen ROM itself can manage app permissions in the settings?!?
Click to expand...
Click to collapse
Yes, and fairly well. Xposed apps DO give more control, though. Amplify, for instance, will let you delay wakeups to every 15 minutes or so, instead of simply turning them on or off.
Ssayerr said:
Yes, and fairly well. Xposed apps DO give more control, though. Amplify, for instance, will let you delay wakeups to every 15 minutes or so, instead of simply turning them on or off.
Click to expand...
Click to collapse
I didn't know that, thanks! I have to give it a try
Sent from my ONE A2001 using Tapatalk
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
clementinox said:
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
Click to expand...
Click to collapse
I had the same issue on b20, but couldn't figure out what was causing it. Do you have gravitybox? Maybe some part of it is affecting how quickly the phone wakes up?
clementinox said:
[...] Stock + root + xposed (without modules yet) [...]
Click to expand...
Click to collapse
xxBrun0xx said:
[...] Do you have gravitybox? [...]
Click to expand...
Click to collapse
I guess not.
Loader009 said:
I guess not.
Click to expand...
Click to collapse
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
xxBrun0xx said:
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
Click to expand...
Click to collapse
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
clementinox said:
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
Click to expand...
Click to collapse
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Sorry this is off topic, but what kind of tweaks do you guys use Gravity Box for in regards to this phone?
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply guys!
I think I might have figured the root cause of the issue. I installed my modules one by one and realized that uninstalling xprivacy module fixed the issue. It's unfortunate since it was one of my favourite modules
my modules for whoever is interested:
-Audio Stream Music Default - pressing volume keys anytime changes media volume instead of ringtone volume
-xposed additions - cutomize volume keys with multiple taps, long presses for multiple use on lockscreen, screen on/off (i use it for long press volume up or down to switch tracks)
-xprivacy - to control what permissions apps use (but doesnt seem to work with MiFavor so i disabled it)
I had this problem while I was on b20, it went back to normal after I went and updated to b27 via @DrakenFX 's method.. When I came back up with b27, root, xposed, bl unlock, haven't had the slow fingerprint problem If it helps anyone else..
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Click to expand...
Click to collapse
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Odeen_c said:
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Click to expand...
Click to collapse
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
`SBR` said:
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
Click to expand...
Click to collapse
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Odeen_c said:
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Click to expand...
Click to collapse
App info> permission for gravity box... By default it should ask when you open gravity box
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
App info> permission for gravity box... By default it should ask when you open gravity box
Click to expand...
Click to collapse
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Odeen_c said:
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Click to expand...
Click to collapse
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
`SBR` said:
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
Click to expand...
Click to collapse
Here it is
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Looks strange... Not sure what is creating the issue...
Here is mine
Sent from my ZTE A2017U using Tapatalk
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Can you check if the module is activated under the modules tab in the xposed app
clementinox said:
Can you check if the module is activated under the modules tab in the xposed app
Click to expand...
Click to collapse
Currently it's not activated.
But 2 days ago, when I installed it firstly, after reboot I couldn't use the phone: it couldn't even get to the pin screen. It was continously doing a screen on and off.
I had to uninstall gravitybox via adb from my pc.
But it has to work (it says you have to activate it) even if it's not activated. At least, on my other device (Moto x style) it does.
NOTE** After a week of using edexposed it was evident that my battery life suffered, as such please be aware of this trade off, for me it's simply not worth it but please read on if you're fine with it.. you'll still get a day but the difference is clear.
Xposed - Gravity box
Pre- requisites
Unlocked bootloader
Rooted
Magisk installed.
Process
------------
Download this: https://github.com/RikkaApps/Riru/releases
Install it using magisk
Reboot
Download this: https://github.com/ElderDrivers/EdX...6.2/EdXposed-YAHFA-v0.4.6.2.4529.-release.zip
Also install it using magisk.
Reboot
Open xposed and update to the full version.
Reboot
Download this: https://github.com/GravityBox/Gravi...0.0.0-beta-7_q/GravityBox_Q_10.0.0-beta-7.apk
Install it.
Activate in Xposed
Activate the Xposed manager too.
Reboot
Make activate the second you need then once complete
Reboot.
Once you've made one change your can alter on the fly
There's an image of what it looks like on my phone afterwards, I can't post it here as it's an edit, just check the thread
Thanks @burtonlax for reminding me that Xposed is still a thing.
It will appear off center as it's relative to the screen, bare in mind our cut out is on the left
If this thread looks odd, its because it started out as a question.
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
vsTerminus said:
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
Click to expand...
Click to collapse
So from what I have, what would I update?
Cheers man this is great to know.
Currently removed the clock from the status bar. Prefer it to on the left.
K-Klock may cause a bootloop so haven't tried that.
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Try gravitybox
burtonlax said:
Try gravitybox
Click to expand...
Click to collapse
Didn't that use xposed?
vsTerminus said:
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Click to expand...
Click to collapse
Thanks.
The right side? Why?? That would look mental.
Take a look at my screenshot
Battery round the camera, networks on the right, would have been perfect to have the clock in the middle, why would it wasn't the clock on the right too?
Anyway nvm appreciate your response. I think carbon has this option and probably PA. I'll probably the up on one of them.
Cheers.
dladz said:
Didn't that use xposed?
Click to expand...
Click to collapse
Yeah
burtonlax said:
Yeah
Click to expand...
Click to collapse
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
dladz said:
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
Click to expand...
Click to collapse
Yeah I'm running it now for an AOD mod on my OP8pro.
burtonlax said:
Yeah I'm running it now for an AOD mod on my OP8pro.
Click to expand...
Click to collapse
Of crap really lol
Which one did you install? Any info would be great
dladz said:
Of crap really lol
Which one did you install? Any info would be great
Click to expand...
Click to collapse
Edxposed, the yahfa one
burtonlax said:
Edxposed, the yahfa one
Click to expand...
Click to collapse
? You decided that the clock looked better on the left?
never heard of it tbh. How did you install it? The chap above seemed to be having issues.
I've just come across an issue myself, my phone has two OS's one is carbon the other is oxygen, trying to get back to oxygen.
This AB **** is really crap. Just doesn't need to be this tedious
EDIT: Just flashed the zip from oneplus to both slots then formatted data in stock recovery. Back now
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Daniel Hjelvik said:
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Click to expand...
Click to collapse
I agree
I'm trying to find the time which needs to be edited to move the clock.
Apparently it was changed to avoid notches..
Besides xposed there must be a way.
So yep gravity box seems to be our only way at the moment.
Added a guide to the op.
Sorry I know it's not easier to accomplish but that's avenue in 2020
PS: little off centre. It's already smiting me.
Added the date, looks ok now
I think it looks more natural on the left.
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
vsTerminus said:
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
Click to expand...
Click to collapse
Hmmm, where's your signal?