I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
clementinox said:
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
Click to expand...
Click to collapse
I had the same issue on b20, but couldn't figure out what was causing it. Do you have gravitybox? Maybe some part of it is affecting how quickly the phone wakes up?
clementinox said:
[...] Stock + root + xposed (without modules yet) [...]
Click to expand...
Click to collapse
xxBrun0xx said:
[...] Do you have gravitybox? [...]
Click to expand...
Click to collapse
I guess not.
Loader009 said:
I guess not.
Click to expand...
Click to collapse
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
xxBrun0xx said:
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
Click to expand...
Click to collapse
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
clementinox said:
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
Click to expand...
Click to collapse
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Sorry this is off topic, but what kind of tweaks do you guys use Gravity Box for in regards to this phone?
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply guys!
I think I might have figured the root cause of the issue. I installed my modules one by one and realized that uninstalling xprivacy module fixed the issue. It's unfortunate since it was one of my favourite modules
my modules for whoever is interested:
-Audio Stream Music Default - pressing volume keys anytime changes media volume instead of ringtone volume
-xposed additions - cutomize volume keys with multiple taps, long presses for multiple use on lockscreen, screen on/off (i use it for long press volume up or down to switch tracks)
-xprivacy - to control what permissions apps use (but doesnt seem to work with MiFavor so i disabled it)
I had this problem while I was on b20, it went back to normal after I went and updated to b27 via @DrakenFX 's method.. When I came back up with b27, root, xposed, bl unlock, haven't had the slow fingerprint problem If it helps anyone else..
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Click to expand...
Click to collapse
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Odeen_c said:
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Click to expand...
Click to collapse
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
`SBR` said:
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
Click to expand...
Click to collapse
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Odeen_c said:
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Click to expand...
Click to collapse
App info> permission for gravity box... By default it should ask when you open gravity box
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
App info> permission for gravity box... By default it should ask when you open gravity box
Click to expand...
Click to collapse
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Odeen_c said:
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Click to expand...
Click to collapse
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
`SBR` said:
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
Click to expand...
Click to collapse
Here it is
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Looks strange... Not sure what is creating the issue...
Here is mine
Sent from my ZTE A2017U using Tapatalk
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Can you check if the module is activated under the modules tab in the xposed app
clementinox said:
Can you check if the module is activated under the modules tab in the xposed app
Click to expand...
Click to collapse
Currently it's not activated.
But 2 days ago, when I installed it firstly, after reboot I couldn't use the phone: it couldn't even get to the pin screen. It was continously doing a screen on and off.
I had to uninstall gravitybox via adb from my pc.
But it has to work (it says you have to activate it) even if it's not activated. At least, on my other device (Moto x style) it does.
Related
Anyone had safely tested xposed on Note 4?
Tmo note 4 here, xposed seems to have broken s health and private mode from what I've found so far.
So it's pretty much the same as S5, I wonder the fix in S5 will work on Note 4. I remember changing some values in a file when I was on S5 with xposed.
Edit:
Just found what I changed last time:
Change in the build.prop:
ro.securestorage.support=false
From 'true' to 'false'.
Anyone brave enough to try?
killkyo said:
So it's pretty much the same as S5, I wonder the fix in S5 will work on Note 4. I remember changing some values in a file when I was on S5 with xposed.
Edit:
Just found what I changed last time:
Change in the build.prop:
ro.securestorage.support=false
From 'true' to 'false'.
Anyone brave enough to try?
Click to expand...
Click to collapse
Tried already, but seems doesn't work. So, I freeze S-health right away.....
There is an Xposed module that should fix this by @wanam I don't know if it will work on the Note 4 like it does on the S5 though.
HERE
badwolf94 said:
There is an Xposed module that should fix this by @wanam I don't know if it will work on the Note 4 like it does on the S5 though.
HERE
Click to expand...
Click to collapse
dude! i love you so much right now lol. i thought i was sol. i tried changing the value in build prop but it actually caused Nova Launcher to crash until i changed it back. (weird i know) has anyone tried using the module on the note 4 yet?
knarfies said:
dude! i love you so much right now lol. i thought i was sol. i tried changing the value in build prop but it actually caused Nova Launcher to crash until i changed it back. (weird i know) has anyone tried using the module on the note 4 yet?
Click to expand...
Click to collapse
The method you mentioned with the changing of the build.prop is reliant on more than just the changing of ro.securestorage.support=true.
1. Make sure you don't have Xposed installed, if you do uninstall it.
2. Then change ro.securestorage.support=true to ro.securestorage.support=false.
3. Install Xposed Framework.
4. Wipe the data from S Health and HealthService.
5. Reboot.
P.S. Pretty sure this method doesn't fix Private Mode
badwolf94 said:
The method you mentioned with the changing of the build.prop is reliant on more than just the changing of ro.securestorage.support=true.
1. Make sure you don't have Xposed installed, if you do uninstall it.
2. Then change ro.securestorage.support=true to ro.securestorage.support=false.
3. Install Xposed Framework.
4. Wipe the data from S Health and HealthService.
5. Reboot.
P.S. Pretty sure this method doesn't fix Private Mode
Click to expand...
Click to collapse
so i would rather go the module fix route then. Once we can get someone to confirm activating it doesn't hose up the phone of course.
I installed Xposed for a few hours, it made the phone very laggy, so I uninstalled it.
Scaven said:
I installed Xposed for a few hours, it made the phone very laggy, so I uninstalled it.
Click to expand...
Click to collapse
it did for me as well at first but then settled down. havent had any lag issues anymoe. It even caused my texts to send slowly. Like i said though, havent seen any other isssues of lag. S health issue is now fixed... the only issue i have is that we cant use private mode.
knarfies said:
it did for me as well at first but then settled down. havent had any lag issues anymoe. It even caused my texts to send slowly. Like i said though, havent seen any other isssues of lag. S health issue is now fixed... the only issue i have is that we cant use private mode.
Click to expand...
Click to collapse
Did you use Wanam's exposed module to fix S-Health?
Anyone tried to enable call recording with exposed? And get it working?
knarfies said:
it did for me as well at first but then settled down. havent had any lag issues anymoe. It even caused my texts to send slowly. Like i said though, havent seen any other isssues of lag. S health issue is now fixed... the only issue i have is that we cant use private mode.
Click to expand...
Click to collapse
I thought private mode was down to being rooted not xposed but I could be wrong
knarfies said:
it did for me as well at first but then settled down. havent had any lag issues anymoe. It even caused my texts to send slowly. Like i said though, havent seen any other isssues of lag. S health issue is now fixed... the only issue i have is that we cant use private mode.
Click to expand...
Click to collapse
So which method you used to fix S health? Module or the above "manual" method?
killkyo said:
So which method you used to fix S health? Module or the above "manual" method?
Click to expand...
Click to collapse
I used wanam xposed to fix it.
I was thinking that you need to be rooted to use Xposed. Is that correct?
knarfies said:
I used wanam xposed to fix it.
Click to expand...
Click to collapse
Thanks, care to share what modules are you using? Just wanna see if those that i intend to use will be working fine.
One more thing, which version of xposed are you using? I installed 2.6.1 and it just lag too much that i cannot even access wanam module.
ewingr said:
I was thinking that you need to be rooted to use Xposed. Is that correct?
Click to expand...
Click to collapse
Yes that's correct
Sent from my SPH-L710 using XDA Free mobile app
Scaven said:
I installed Xposed for a few hours, it made the phone very laggy, so I uninstalled it.
Click to expand...
Click to collapse
Disable s-health and all will be fine my friend
---------- Post added at 09:07 PM ---------- Previous post was at 09:04 PM ----------
killkyo said:
Thanks, care to share what modules are you using? Just wanna see if those that i intend to use will be working fine.
One more thing, which version of xposed are you using? I installed 2.6.1 and it just lag too much that i cannot even access wanam module.
Click to expand...
Click to collapse
Freeze s-health until a fix is found.
My phone is running fantastic at the moment.
It was laggy as crap after installing xposed.
Now its flawless.
They had this problem on the S5, the reason why it lags so much is that Xposed interferes with one of the checks that Private mode and the S Health service use, which causes the sensor for S Health to constantly hang(this causes the lag you have mentioned).
The Wanam module XSecureStorage fixes this by skipping the check the apps make.
I imagine the reason why Private Mode doesn't work even with this module, is because the Secure Element is in a different place; since this module is technically only for S5 and hasn't been update for compatibility.
Flash at your own RISK!
Tested on T-Mobile,AT&T,Verizon & Sprint
How to install Xposed on your Snapdragon S8+
I want to thank the man @elliwigy for making root happen!
I also want to thank @ErnyTech for making Xposed happen also!
Now it's time to share how to install this bad boy on Snapdragon S8+
First, you will need is flash fire and root to make this work!
Make sure you download these files to get Xposed to work people it's an easy way to work
1.https://forum.xda-developers.com/devdb/project/dl/?id=25965
2.https://drive.google.com/uc?export=download&id=0B8N7MRg8VIZRMVN5eFVEdGdoaFU
Make sure you get the updated version for link number 1
Installed apk first then in flash fire make you put Android Nougat SDK24 7.0 into the flash zip or ota section
MAKE SURE! you dont check auto-mount and mount/system read/then just hit the check on the top right corner
After let it do its magic and hit flash and ones it boots back up Xposed should be working
List of modules that work as of 8/28/2017 7:32 pm north-west time
GravityBox (N) (https://forum.xda-developers.com/attachment.php?attachmentid=4236823&d=1502286810)
Ifont
Magisk App Only (Test) (https://www.apkmirror.com/apk/topjo...se/magisk-manager-5-2-0-android-apk-download/)
3C Toolbox Pro
All my...
Adblocker Reborn
AFWall+
App locale
App settings
AppOpsXposed
Awesome pop-up video
Better Battery Saver
Blurred SystemUI (LP)
Boot Manager
Call Blacklist Pro
Cool Tool
CrappaLinks
Device ID changer
Disable Flag Secure
Enhanced Toasts
Exi for Swiftkey
Fake Gapps
Fake Wifi Connection
Fingerprint enabler
Flat style bar indicator
ForceDoze
Force Immersive Mode
GNL App Hider
Google Search Bar Destroyer
GravityBox
HaveOwnOrientation
Hide Carrier
InstallerOpt
Lataclysm 1.32
Lightning Wall
Lockscreen tweakbox
MaxLock
MyAndroidToolsXposed
My Day Off Messenger Xposed
Native clipboard
No Device Check
No Lock Home for 5.x/6.0
No Lockscreen Wallpaper
NSFW GBoard
One-Hand Mode Xposed Mod
Obb on SD
Pixel Settings (Update for Nougat is released)
Play store changelog
PowerNap
Prevent Running
Qs X tiles per row
Receiver Stop
Re-Enable Screenshot
RootCloak
Screen off animation
Smart Network 1.7.1
Status bar cleanup
Statusbar Download Progress
Screenshot Delay Remover - Mod
Suggestions Toggle
Text Aide
Tumblr AdAway
Unique controls
Unrestrictedgettasks
XInsta
XinternalSd works
X Messenger Privacy Premium
Xposed edge
Xposed one tap for Facebook
Xposed one tap for YouTube
Xposed StatusBar Text
XPrivacy
XNotifications
Xtended Navbar
YouTube Adaway
YouTube background playback
XVolume30
Disable Samsung Gear Manager Notification
Lucky Patcher
Burnt Toast
ButteredToast
Copy Toast
Partially Working:
Amplify: convert in System App and change all files permission to 777, SELinux permisive
Flat style bar indicators: works with signal, wifi, clock, battery being themed
Lollistat: module works with some apps
Minminguard: Makes some apps Crash better not use it at the moment
Obb on Sd: works perfectly on SD650/SD820; Works partially on SD835).
Physical Button Music Control: Some Users reported its working, for some not
Snapprefs : SC randomly crash , most of the features don't work BUT saving is okay (via 'Autosave' , not 'save Button')
Use USB for marshmallow
I want to say thanks to these people for sharing their discoveries
@cameljockey1
@TheLastSidekick
@Interceptor777
@luderbeck1
HIT THE BIG THUMPS UP AND SHARE!
ALSO, Hit the 5 Stars PLEASE!
Sweet, thanks!
but is it stable
What modules have you tried that Work?
Sent from my SM-G955U1 using Tapatalk
MINTED7 said:
but is it stable
Click to expand...
Click to collapse
i had no issues with it so far been running it for a few days now
dogredwing1 said:
What modules have you tried that Work?
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
t-mobile and AT&T s8+ i don't have other phones
3
walkerblue2023 said:
t-mobile and AT&T s8+ i don't have other phones
Click to expand...
Click to collapse
he meant what xposed apps work
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
walkerblue2023 said:
t-mobile and AT&T s8+ i don't have other phones
Click to expand...
Click to collapse
he meant what xposed module apps work
---------- Post added at 04:27 AM ---------- Previous post was at 04:26 AM ----------
no idea why that double replied
MINTED7 said:
he meant what xposed apps work
Click to expand...
Click to collapse
I only have a few of them I use and they work so far
Any chancw this works on the s8?
wildermjs8 said:
Any chancw this works on the s8?
Click to expand...
Click to collapse
give it a try and let me know and if it does so we can let people know about it
Well, I'm officially getting old I guess...
Was hoping to see if root cloak works and I see that hasn't been supported for a while. So, I went ahead and uninstalled using the uninstaller.zip arm64 for sdk 24, most recent version.
Anyone wondering;
Uninstalling, for me, went just as easy as installing.
Sounds like everything, for 7.0+ is still in beta/testing by rovo so do all this at your own risk.
the1stSecond said:
Well, I'm officially getting old I guess...
Was hoping to see if root cloak works and I see that hasn't been supported for a while. So, I went ahead and uninstalled using the uninstaller.zip arm64 for sdk 24, most recent version.
Anyone wondering;
Uninstalling, for me, went just as easy as installing.
Sounds like everything, for 7.0+ is still in beta/testing by rovo so do all this at your own risk.
Click to expand...
Click to collapse
I don't see the point in uninstalling because root clock doesn't work though, eitherway you can't use Knox or SafetyNet so might as well have Xposed.
Also there is another module called No Device Check which lets you use simpler apps like Snapchat, Mario Run, Pokemon GO etc... no Android Pay though.
Interceptor777 said:
I don't see the point in uninstalling because root clock doesn't work though, eitherway you can't use Knox or SafetyNet so might as well have Xposed.
Also there is another module called No Device Check which lets you use simpler apps like Snapchat, Mario Run, Pokemon GO etc... no Android Pay though.
Click to expand...
Click to collapse
Good point, and I'm sure I'll reinstall at some point.
I'll try out the module you recommended as well, thanks!
Don't know if first link is down or if it's my phone but it doesn't let me click on it, I still found the apk but just fyi OP
Maurylucha said:
Don't know if first link is down or if it's my phone but it doesn't let me click on it, I still found the apk but just fyi OP
Click to expand...
Click to collapse
thanks for letting me know updated the link should be good to go
So just load then don't check anything and flash, your Instructions should be a bit clear
Sent from my SM-G955U1 using Tapatalk
@walkerblue2023 Did you make any changes to the source?
ErnyTech said:
@walkerblue2023 Did you make any changes to the source?
Click to expand...
Click to collapse
No I didn't do anything
thatotherguy.. said:
So just load then don't check anything and flash, your Instructions should be a bit clear
Click to expand...
Click to collapse
I think it's pretty clear on how too
Cool. Awesome dude ! This community is amazing ! I will install when a i get home ! and hey we should keep installing modules and then the OP should insert the ones that work into the main post. If you wanted to. Just a suggestion, because a lot of people will ask what works and what doesn't unless there is a list already. Thanks for the information. !
Was hoping to learn what folks are using root for. I am using substratum but would love to have an advanced power menu but wasn't sure where to look. Would also love some ideas of what others are using root for, for ideas. Thanks!
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
+1 for Adaway. I'm also waiting for kernel sources and for kernel devs to bless us with screen calibrations, memory improvements, and other goodies
george241312 said:
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
Click to expand...
Click to collapse
Is there exposed for Oreo?
No
vergilbt said:
No
Click to expand...
Click to collapse
Doesn't look like viper works for oreo either? So what yall do on oreo after rooting?
Tasker, adaway, root Explorer and deleting unnecessary apps?
There are a lot of needs...
And viper4android. But unfortunately I didn't install it (I'm used to use the Magisk module)
Anybody is running viper?
What are folks using for advanced power menu on oreo?
I was rooted on 7.1.1 for Substratum. I am on 8.0 and unrooted since Substratum works without root on Oreo.
Oreo, rooted.
•Magisk + testing Magisk modules that might work with Oreo
•RootExplorer
•Android pay
•Titainium Backup
•Light Flow + Light Flow legacy
•Substratum (legacy)
•Kernel Auditor
•Waiting on a working TWRP doesn't absolutely need root, but an unlocked bootloader, custom recovery and root seems to go together.
And whatever else fun I find to mess around with.
Root is a must for me. I like the full control of the device I own. And again, it's fun!
george241312 said:
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
Click to expand...
Click to collapse
Which viper4android did u flash? I can't make any work
Yeah... I was going to say. Why root at this point? The only thing I can think of is doing a Titanium Backup so I can backup the apps WITH the data. I don't know of any app that can backup the apps with data of an unrooted phone, do you? Other than that... I dunno. What you think?
12paq said:
Oreo, rooted.
•Magisk + testing Magisk modules that might work with Oreo
•RootExplorer
•Android pay
•Titainium Backup
•Light Flow + Light Flow legacy
•Substratum (legacy)
•Kernel Auditor
•Waiting on a working TWRP doesn't absolutely need root, but an unlocked bootloader, custom recovery and root seems to go together.
And whatever else fun I find to mess around with.
Root is a must for me. I like the full control of the device I own. And again, it's fun!
Click to expand...
Click to collapse
I don't want a phone that the vendor or carrier control.
I own it and I scold be able to do what I want.
The only thing on a phone that should ever be locked it the radio partition so they can control how the device accesses the network.
Other than that, leave my phone alone.
Greenify's best battery-saving features require both root and Xposed.
I also really like the GMS Doze Magisk module for battery savings.
And I never want to do without the ability to use EX Kernel Manager or Kernel Adiutor to squeeze some more battery and performance out of my device via scheduler and governor options. Some of the options for this phone (hexacore mode, adaptive low-memory killer) are pretty intriguing and can't be edited otherwise.
nrage23 said:
I was rooted on 7.1.1 for Substratum. I am on 8.0 and unrooted since Substratum works without root on Oreo.
Click to expand...
Click to collapse
Is it possible to theme the navbar with Substratum on Oreo?
primaleph said:
Greenify's best battery-saving features require both root and Xposed.
I also really like the GMS Doze Magisk module for battery savings.
And I never want to do without the ability to use EX Kernel Manager or Kernel Adiutor to squeeze some more battery and performance out of my device via scheduler and governor options. Some of the options for this phone (hexacore mode, adaptive low-memory killer) are pretty intriguing and can't be edited otherwise.
Click to expand...
Click to collapse
Your philosophy is flawed...
Xposed just being installed is an enormous battery drain in it's current incarnation...
You're better off without Xposed if you're looking for battery
Sent from my PH-1 using Tapatalk
rignfool said:
Your philosophy is flawed...
Xposed just being installed is an enormous battery drain in it's current incarnation...
You're better off without Xposed if you're looking for battery
Click to expand...
Click to collapse
Is that also true for systemless Xposed? If so, I'm glad to disable it.
primaleph said:
Is that also true for systemless Xposed? If so, I'm glad to disable it.
Click to expand...
Click to collapse
Just having Xposed and gravitybox made it so I was draining at about twice the rate as without... At idle... In my pocket
Sent from my PH-1 using Tapatalk
Teloah said:
Is it possible to theme the navbar with Substratum on Oreo?
Click to expand...
Click to collapse
Yes. Just get a theme with nav bar options.
nrage23 said:
Yes. Just get a theme with nav bar options.
Click to expand...
Click to collapse
Thanks, works like a charm.
Xposed was released for Oreo! Been so long don't know where to start.
EDIT: (I was just being dumb)
Grab the systemless version. Easiest way is through Magisk. Just make sure your on 15.2 or grab it via the link below.
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Enjoy
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
TENN3R said:
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Click to expand...
Click to collapse
I feel dumb but I don't see xposed anywhere in the modules section of the Magisk Manager app.
Is there some other way I should be finding modules? I click on the hamburger menu and then downloads and there's about 30 or so listed.
---------- Post added at 07:34 PM ---------- Previous post was at 06:48 PM ----------
Never mind. I figured out I had to be on Magisk 15.2. I was on 14.5.
So anyway I downloaded the Xposed Installer that is linked in Magisk Manager and installed it. Then I installed Xposed inside of Magisk. The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
daddylonglegs said:
... The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
Click to expand...
Click to collapse
Yes, I confirm, I don't know if it's caused by Magisk or because it's just a beta...
Anyway there is a workaround, instead of downloading the module from xposed manager, download the apk of the module from internet (official repo website or from whatever you want), because when you are going to install and enable the modules there are no problems, and after a reboot they're working.
Updated op to reflect install options. Happy modding everyone!
Success! ?
.. now for that network speed in the status bar hehe
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
KittyRgnarok said:
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
Click to expand...
Click to collapse
Did you download the modded apk as well? That's what threw me off
bush911 said:
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Click to expand...
Click to collapse
Don't know if it's supported. Of course you rebooted? I'm sure a lot of things will need slight tweaks to work on Oreo
pangolin.rollin said:
Did you download the modded apk as well? That's what threw me off
Click to expand...
Click to collapse
Yeah I did everything the same as the way you installed nougat Xposed systemlessly. Also the framework module caused a lot of choppiness on my phone so I uninstalled it anyways
Just a head's up that MinMinGuard causes my Pixel to start crashing like crazy
I have been thinking of installing this since last night, but with it still in beta and modules still needing fixed for 8.1 I just can't see any reason (other than something new for me to play with) that will benefit me enough to deal with the SafetyNet failure.
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
marsrolled said:
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
Click to expand...
Click to collapse
Not running it since it still doesn't offer a way to pass SafetyNet.
sliding_billy said:
Not running it since it still doesn't offer a way to pass SafetyNet.
Click to expand...
Click to collapse
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
marsrolled said:
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
Click to expand...
Click to collapse
I am happily enjoying the stock ROM on my XL and I keep the same installed on my wife's Pixel. I spent years swapping out custom ROMs on various devices and expected to do the same when I got the PIxels (very shortly after released almost 2 years ago). After the initial shortage of custom ROMs (due to the new OS engineering method) subsided and plenty came out, I realized there was nothing I was missing enough to deal with running custom and not being able to do a monthly update that takes me literally less than 10 minutes. Besides not missing anything, there is pretty much no bloat I need to get rid of, and the device still runs great even with a handful of "always on" apps. Probably best for you to look at the development sub-forum and do your research there and ask questions.
haven't used xposed in years. Is it still worth it with the recent android OS's?
nasedase said:
haven't used xposed in years. Is it still worth it with the recent android OS's?
Click to expand...
Click to collapse
That's like asking, "which tastes better, vanilla or chocolate?" Make a twrp backup, and give it a try, what you like, another may hate. For me, it's fun to add features when I'm using a rom that is lacking in that department.
NOTE** After a week of using edexposed it was evident that my battery life suffered, as such please be aware of this trade off, for me it's simply not worth it but please read on if you're fine with it.. you'll still get a day but the difference is clear.
Xposed - Gravity box
Pre- requisites
Unlocked bootloader
Rooted
Magisk installed.
Process
------------
Download this: https://github.com/RikkaApps/Riru/releases
Install it using magisk
Reboot
Download this: https://github.com/ElderDrivers/EdX...6.2/EdXposed-YAHFA-v0.4.6.2.4529.-release.zip
Also install it using magisk.
Reboot
Open xposed and update to the full version.
Reboot
Download this: https://github.com/GravityBox/Gravi...0.0.0-beta-7_q/GravityBox_Q_10.0.0-beta-7.apk
Install it.
Activate in Xposed
Activate the Xposed manager too.
Reboot
Make activate the second you need then once complete
Reboot.
Once you've made one change your can alter on the fly
There's an image of what it looks like on my phone afterwards, I can't post it here as it's an edit, just check the thread
Thanks @burtonlax for reminding me that Xposed is still a thing.
It will appear off center as it's relative to the screen, bare in mind our cut out is on the left
If this thread looks odd, its because it started out as a question.
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
vsTerminus said:
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
Click to expand...
Click to collapse
So from what I have, what would I update?
Cheers man this is great to know.
Currently removed the clock from the status bar. Prefer it to on the left.
K-Klock may cause a bootloop so haven't tried that.
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Try gravitybox
burtonlax said:
Try gravitybox
Click to expand...
Click to collapse
Didn't that use xposed?
vsTerminus said:
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Click to expand...
Click to collapse
Thanks.
The right side? Why?? That would look mental.
Take a look at my screenshot
Battery round the camera, networks on the right, would have been perfect to have the clock in the middle, why would it wasn't the clock on the right too?
Anyway nvm appreciate your response. I think carbon has this option and probably PA. I'll probably the up on one of them.
Cheers.
dladz said:
Didn't that use xposed?
Click to expand...
Click to collapse
Yeah
burtonlax said:
Yeah
Click to expand...
Click to collapse
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
dladz said:
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
Click to expand...
Click to collapse
Yeah I'm running it now for an AOD mod on my OP8pro.
burtonlax said:
Yeah I'm running it now for an AOD mod on my OP8pro.
Click to expand...
Click to collapse
Of crap really lol
Which one did you install? Any info would be great
dladz said:
Of crap really lol
Which one did you install? Any info would be great
Click to expand...
Click to collapse
Edxposed, the yahfa one
burtonlax said:
Edxposed, the yahfa one
Click to expand...
Click to collapse
? You decided that the clock looked better on the left?
never heard of it tbh. How did you install it? The chap above seemed to be having issues.
I've just come across an issue myself, my phone has two OS's one is carbon the other is oxygen, trying to get back to oxygen.
This AB **** is really crap. Just doesn't need to be this tedious
EDIT: Just flashed the zip from oneplus to both slots then formatted data in stock recovery. Back now
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Daniel Hjelvik said:
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Click to expand...
Click to collapse
I agree
I'm trying to find the time which needs to be edited to move the clock.
Apparently it was changed to avoid notches..
Besides xposed there must be a way.
So yep gravity box seems to be our only way at the moment.
Added a guide to the op.
Sorry I know it's not easier to accomplish but that's avenue in 2020
PS: little off centre. It's already smiting me.
Added the date, looks ok now
I think it looks more natural on the left.
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
vsTerminus said:
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
Click to expand...
Click to collapse
Hmmm, where's your signal?