The Galaxy Note 4 is only charging when it is connected to my pc but it is not detected by the pc..It only charges the phone..I connected it to another pc and it is the same..The fast charging also stopped working..I tried to connect another Note 4 to the pc(with the same cable) and it works fine..So the problem isn't from the pc..When I enter into download mode and open Odin,it recognise the phone..I've cleared the phone and installed lollipop 5.1.1(hoping it would solved this issue, as I was on 5.0.1 but it is still the same)..I can't copy anything on my phone Do you have any solution?
i dont know if this is going to work just an idea. type *#0808# Make sure Usb is selected as "AP" and Usb Settings is as "MTP" then connect the device....if not working then enter the code again and this time change usb settings to MTP+ADB see if it works. Also Try a different cable i know this cable works okay on other phone but just for the heck of it try a different one
dork997 said:
i dont know if this is going to work just an idea. type *#0808# Make sure Usb is selected as "AP" and Usb Settings is as "MTP" then connect the device....if not working then enter the code again and this time change usb settings to MTP+ADB see if it works. Also Try a different cable i know this cable works okay on other phone but just for the heck of it try a different one
Click to expand...
Click to collapse
I already tried to dial *#0808# and change the usb setting but it didn't work..I used another cable too but it is still the same
Related
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
ron101 said:
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
Click to expand...
Click to collapse
Do you have the usb drivers installed correctly? Or try another usb port/ cable.
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
fffft said:
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
Click to expand...
Click to collapse
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
ron101 said:
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
Click to expand...
Click to collapse
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
gee2012 said:
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
Click to expand...
Click to collapse
Noooop its not that i have win 7 pro
ron
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Have you activated developer oprions and usb debug?
ron101 said:
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Click to expand...
Click to collapse
If you haven't given AirDroid permissions to send SMS directly, "FORBIDEN.FAILED TO SEND MESSAGE" might appear. Change the permissions in phone's settings for a try
fffft said:
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Click to expand...
Click to collapse
AFTER last nite i started again this morning (im disabled completely down the right side of my body) with a new spirit fffft i got stuck in.So here we go first i put the USB cable in another usb port (one that i havent used) and the phone came alive and that was that it was done.So i tried another usb cable,that also came alive, so that was that it was the usb port that i was using wasnt suitable simple as that. Thank you for all of your help fffft and the rest it was essential for me THANK YOU.
s5 usb connect - device not recognized cant access secret menu *#0808#
can anyone give advice how to access menu *#0808# when I dial it trys to call the number not open menu
my usb is not work on s5
always says device not recognized but it charges perfect on connect
no one has advice?
Look for Samsung usb driver, it will open a Samsung Dev website, download and install the drivers. Of it's not working either, try on another USB port, another computer, another cable, another phone with the same steps above, of it's not recognizing it on all computers, it's a faulty USB port, it may charge but no data transfer.
midi_1996 said:
Look for Samsung usb driver, it will open a Samsung Dev website, download and install the drivers. Of it's not working either, try on another USB port, another computer, another cable, another phone with the same steps above, of it's not recognizing it on all computers, it's a faulty USB port, it may charge but no data transfer.
Click to expand...
Click to collapse
i have a g900v s5 here
the usb port is a new one, says g9008v on the usb hardware. is there a way to check the usb driver on the phone? maybe the usb driver needs reset or update
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
majorr92 said:
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
Click to expand...
Click to collapse
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
lekiaM said:
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
Click to expand...
Click to collapse
USB debugging is Enable still nothing happen
USB debugging is not required in order to have the phone recognized by the computer.
Have you tried different USB cables and USB ports? Is the phone detected on other computers?
i had the same problem.... and we found out that the pins or the usb connection sh1t from the phone doesn`t make good contact. si try to push a little but or force up and down the usb cable to the usb from phone maybe you will manage to find a stable connection or something.
when i connect to phone to the pc i have to hold the usb cable connected to the phone in a weird position. that works for me
I've got 5 S7s on my desk, all Canadian variant, all from the same manufacturer all the same model. - SM-G930W8
All are recognised by my PC but one and I can't work out why not!
Plugging the phone into the PC makes no noise from the PC but the phone seems to detect a regular charger not a PC.
I have plugged it in using different cables including the one in its box and the ones used on other devices that were recognised and only this phone doesn't work with any of them.
I have plugged in, unplugged and rebooted many times.
I have set the USB configuration to MTP (Media Transfer Protocol)/Transferring files.
USB Debugging is ON and OEM unlocking is ON.
I have tried booting into stock recovery and wiping cache AND factory resetting.
When phone is turned on "adb devices" returns nothing.
I have installed Samsung Kies and Samsung Smart Switch to reinstall the drivers.
NOTHING IS WORKING!
All threads I find tell me to do the things I have listed above and have people saying these have worked but all of them I had already tried and double tried and nothing is working.
The cables are correct and working with other S7s of the same model.
All the correct drivers are installed and have been uninstalled and reinstalled.
All the correct setting are selected and OEM unlock and USB debugging enabled.
Phone was fresh out the box as were the other four and all cables.
Samsungs apps installed on PC to ensure best drivers installed.
Would really appreciate some guidance or consolation that its not something stupid I'm doing! I work with these phones everyday and this has never happened! Just banging my head against a brick wall trying to resolve it
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
yaro666 said:
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
Click to expand...
Click to collapse
Thanks but unfortunately Odin doesn't recognise in download mode.
Could it be a USB port problem if I used the same port for the other 4 devices and have no issue?
I'm considering sending the phone back to manufacturer to be honest I think it may just be a faulty device or something!
I bet its microusb port fault
Had a similar issue on Windows 10 , if that's what your running let the phone be connected, uninstall the driver from device manager, and then install driver select have disk and select the basic mtp , if this doesn't help connect to Microsoft support and they'll guide you through it , worked for me , my phone used to detect on other laptops but mine , also I could connect other phones on mine but not my phone, hope this helps
same issue here
my nexus 6 will only charge no data transfer and pc wont recognize it. When i connect it to the pc it goes staright to charge mode and the usb trident symbol doesnt ever appear. In developer options usb configure is stuck in "charge mode" only. Ive tried different roms from pie to mm . i reinstalled bootloader and radio, tried twrp back ups and still the same. Had new charging port put in phone thinking that was the problem but didnt help. Ive searched google but couldnt find anything. Any Ideas, really appreciate it thx
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
kanpol said:
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
Click to expand...
Click to collapse
Just to double check that adb devices shows your serial #. If not, it may be a driver issue.
Computer doesn’t see it, when I enter adb devices it doesn’t show up. Nothing shows up in device manager either: Also when I enter fast boot on the phone “power lower volume button” it says “connect usb data cable” I’ve trued numerous cables that work fine on my other phone. So it’s not the cable. After I plug them into phone it still says connect usb data cable.
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
kanpol said:
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
Click to expand...
Click to collapse
It sounds like a driver problem. Is it a windows PC? Have you tried installing the Google USB driver? I've had similar issues, and reinstalling the driver(s) has worked for me.
It’s windows 10 and I reinstalled driver, other thing is in my car when I plug it in to the usb slot for android auto, it doesn’t show up in my car either and it used too.
It’s like the phone is stuck in charge only mode and I can’t get it out of that
kanpol said:
It’s like the phone is stuck in charge only mode and I can’t get it out of that
Click to expand...
Click to collapse
When you connect your other phone to your PC, does its serial # show up in adb devices? If so, I'm out of suggestions.
1 more thing.. Have you enabled USB debugging in Developer Options?
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
kanpol said:
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
Click to expand...
Click to collapse
Forget USB configuration for a minute. In developer options, under debugging, USB debugging needs to be enabled.
usb debugging is enable also. even tried turning it off and back on again, didnt help.
you know when you connect phone to pc and you normally see the usb trident symbol on your phone, well when i connect it to the pc i dont see that symbol it just goes straight to charging but even charging i should still see the usb symbol and i dont,