Database Users

"Can't connect to camera" Error

First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)

Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
the error when booted can be resoled by flashing the latest vendor img, or at least the one relevant to your roms version.
took me about 2 weeks to figure this out because no one would give me the slightest hint when i asked.
the error screen when it first tries to start i havent been able to resolve, and am thinking there may be none.
not sure what your camera issue could be, but i have seen cam issues from the kernel, when the switch to 6.0,1 first began to merge.
maybe test another kernel, other than that i dont know.

Samehere
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
I'm facing exactly the same issue. The camera works fine when I flash a stock based ROM like pure nexus or digitalhigh but as soon as I flash an aosp based ROM or cyanogenmod like chroma,screw'd,benzo. The camera says couldn't connect to camera and nothing seems to work. I've wiped cache, data but still no progress.
I even tried the flashable camera.zip but didn't work.

Problem Solved !!!
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera

wrahul31 said:
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
Click to expand...
Click to collapse
Thanks, I have reverted to stock ROM but I might try it soon

A very unusual issue with the fingerprint scanner

I've had my phone for a few months now
I flashed the Skydragon 6.0.1 ROM yesterday and I wanted to move back to 5.1.1
So I did, I flashed the TWRP for 5.1.1 and I flashed the Stock OOS 2.2.0
But now, my home button works and Im able to register my fingerprint but after I selected use fingerprint to unlock it doesn't unlock
I've tried every solution on the Internet such as
1) Force stop com.oneplus.fingerprint and hard reset
2)Use software nav buttons
3)Factory reset
Nothing seems to work
I love the fingerprint feature in the OP2
Someone please help me out.
When I dialled *#808# and checked the finger print auto test and it said PASS
So Im sure its not a Hardware error

You should probably flash the old modem back. Can you please get into the security settings inside settings and tell me if you have a force close. If you get a force close you have to flash the old modem.
By saying modem I mean firmware. You can find it in OnePlus 2 Android development > taker18's cyanpop's second post.
Or in blissmallow thread second post.
Sent from my ONE A2003 using Tapatalk

I have the exact opposite issue. My FPS works with all ROMs except H2OS 6.0.1. Let me know if you find a solution. Might help me fix my problem.

kane1234 said:
I've had my phone for a few months now
I flashed the Skydragon 6.0.1 ROM yesterday and I wanted to move back to 5.1.1
So I did, I flashed the TWRP for 5.1.1 and I flashed the Stock OOS 2.2.0
But now, my home button works and Im able to register my fingerprint but after I selected use fingerprint to unlock it doesn't unlock
I've tried every solution on the Internet such as
1) Force stop com.oneplus.fingerprint and hard reset
2)Use software nav buttons
3)Factory reset
Nothing seems to work
I love the fingerprint feature in the OP2
Someone please help me out.
When I dialled *#808# and checked the finger print auto test and it said PASS
So Im sure its not a Hardware error
Click to expand...
Click to collapse
I had the same problem. Do a wipe then flash this it worked for me
https://drive.google.com/file/d/0B97c1b2UXMxCZkh3T0VzSmlCWms/view?usp=docslist_api
Sent from my ONE A2003 using Tapatalk

Thanks guy, I fixed the problem by flashing a persist.img

BLack screen after installing any rom

On my note3 (n900t), after I install any rom, which I've tried CM11, CM13, ResurrectionRemix v5.6.0 and 5.6.5, and the latest version for lollipop. Every time, it will install successfully via twrp, get to the welcome/language select screen, then the screen will go black, i.e. off. Pressing buttons or tapping the screen still turns the haptic motor, but does nothing, and the back/menu lights come on for a split second at a time, and sometimes spaz out turning on and off on their own.
these are the guides I followed, if it helps:
CM13: androiding.how/download-note-3-cm13-rom-marshmallow/
CM11: Just the wiki
RR: galaxynote3root.com/sm-n9005-galaxy-note-3-roms/resurrection-remix-rom-w-android-6-0-1-for-galaxy-note-3-marshmallow/The video in this one shows it working on a n900t, so it isnt a model compatibility thing
Is there something I've done wrong here? How can I fix this and install one of these?
(sorry about the links, I made an account to try and find help)

zxsq said:
On my note3 (n900t), after I install any rom, which I've tried CM11, CM13, ResurrectionRemix v5.6.0 and 5.6.5, and the latest version for lollipop. Every time, it will install successfully via twrp, get to the welcome/language select screen, then the screen will go black, i.e. off. Pressing buttons or tapping the screen still turns the haptic motor, but does nothing, and the back/menu lights come on for a split second at a time, and sometimes spaz out turning on and off on their own.
these are the guides I followed, if it helps:
CM13: androiding.how/download-note-3-cm13-rom-marshmallow/
CM11: Just the wiki
RR: galaxynote3root.com/sm-n9005-galaxy-note-3-roms/resurrection-remix-rom-w-android-6-0-1-for-galaxy-note-3-marshmallow/The video in this one shows it working on a n900t, so it isnt a model compatibility thing
Is there something I've done wrong here? How can I fix this and install one of these?
(sorry about the links, I made an account to try and find help)
Click to expand...
Click to collapse
Did you do all the wipes? On TWRP I always press advanced(I don't use factorey reset), then select everything but internal storage and SD, then I flash and it boots just fine.

robertofelce said:
Did you do all the wipes? On TWRP I always press advanced(I don't use factorey reset), then select everything but internal storage and SD, then I flash and it boots just fine.
Click to expand...
Click to collapse
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|

zxsq said:
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|
Click to expand...
Click to collapse
Remember that rr marshmallow releases don't work for SM N900. I guess that your phone is sm N9005. Right?
If it is, is awkward that you can't flash a rr marshmallow ROM

You should be in the T-Mobile note 3 forum?
Cm12.1 for the hltetmo: https://download.cyanogenmod.org/?device=hltetmo

zxsq said:
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|
Click to expand...
Click to collapse
got exactly the same problem....Tried to flash repair stock rom with pit, with success, but doesn't change anything
can flash 5.0 stock or 5.1 port rom but not CM or AOSP..
if you find what happen....

Hi, I've had the same issue on my Note 3 N9005. I thought it was a problem caused by Knox, so I opened the original bootloader and I deleted every Knox file; then I flashed it and it works. I tried this solution with the Resurrection Remix Rom v5.6.5, but when I updated to v5.6.7 it gave me the same problem. After a sleepless night I realized that, being the problem related to hardware components (the screen), and being impossible that such components were broken, I thought that the real problem was the kernel, so I tried to flash a compatible kernel with the Marshmallow 6 version of Android and it finally works. The kernel in question was the NetHunter one (Kali Linux), that I flashed even when I flashed the bootloader, without noticing.

rikymatteo97 said:
Hi, I've had the same issue on my Note 3 N9005. I thought it was a problem caused by Knox, so I opened the original bootloader and I deleted every Knox file; then I flashed it and it works. I tried this solution with the Resurrection Remix Rom v5.6.5, but when I updated to v5.6.7 it gave me the same problem. After a sleepless night I realized that, being the problem related to hardware components (the screen), and being impossible that such components were broken, I thought that the real problem was the kernel, so I tried to flash a compatible kernel with the Marshmallow 6 version of Android and it finally works. The kernel in question was the NetHunter one (Kali Linux), that I flashed even when I flashed the bootloader, without noticing.
Click to expand...
Click to collapse
My note 3 smnN900t is doing that same thing and it sucks because I know I did everything perfectly!! What Kernel were you able to flash for it and where did you download it from? By the way thanks in advance for any help and info you can give!!!

Wrong forum
forum links .
http://forum.xda-developers.com/showthread.php?t=2574886

Please help I am having the same issue. Did anyone find a solution for this ?

Home button not working at all (tried several fixes)

(Edit 1) Found a fix already! Read post 2!!!
Hello there,
I've been having a OnePlus Two since 4 months already, and had like 2 or 3 home button not working issues.
They used to fixed by themselves after a couple of days of not working, but not this last time.
I tried already the reinstalling system (after formatting system via TWRP), clean it several times, hard reset (hold power button for more than 20 seconds), complete drain battery and fully charge it again, force stop fingerprint service, take out the tempered glass screen protector, and none of those solutions worked.
I here attach (copy the link, can't upload a video directly to this post) a video in which you can see that whenever I power on the screen (still locked), the home button works for several times, but as soon as I unlock it (pattern lock) it stops working. This makes me think that the problem is software, not hardware, but as I said before, already tried reinstalling OOS 3.0, wiping system, cache, data, internal storage, etc.
I compressed the video so it wouldnt be too big, but quality is good enough, just rise the volume so you can listen to the "vibration" that the home button produce.
Any help would be appreciated.
Sincerely,
Daniel Castro

Fix for the issue!
Forum people, I found a fix!
Ok, the solution for making the home button work again (with fingerprint sensor) is the following.
-Factory reset while in OOS 3.0
-Set up everything up and then reboot into fastboot mode
-Install OOS 2.1 via fastboot (you will need to search the forums for it)
-Set up everything up and try to set up fingerprint (it wont work)
-Copy OOS 3.0 (Beta) in the root of the phone
-Reboot into stock recovery and flash OOS 3.0 (beta)
-Factory reset it and set up everything again
-Voila!
Feel free to try this method and reply to this threat or P.M. me for any help.
Sincerely,
Daniel Castro

I have the same problem
Tomorrow i'll try your method
I've posted a questione about this issue,
I think the One plus team should find a solution to this problem that afflict many users

Also, don't forget to rotate your phone 720 degrees, counter clock wise! ? hocus pocus....

DCastro555 said:
Forum people, I found a fix!
Ok, the solution for making the home button work again (with fingerprint sensor) is the following.
-Factory reset while in OOS 3.0
-Set up everything up and then reboot into fastboot mode
-Install OOS 2.1 via fastboot (you will need to search the forums for it)
-Set up everything up and try to set up fingerprint (it wont work)
-Copy OOS 3.0 (Beta) in the root of the phone
-Reboot into stock recovery and flash OOS 3.0 (beta)
-Factory reset it and set up everything again
-Voila!
Feel free to try this method and reply to this threat or P.M. me for any help.
Sincerely,
Daniel Castro
Click to expand...
Click to collapse
Will it erase my internal storage during that fast boot step? So I can backup all my data.
Sent from my ONE A2003 using Tapatalk

these fixes are all coincidences... we need to request a definitive fix from One plus team if is a software issue.

LOL9988 said:
Will it erase my internal storage during that fast boot step? So I can backup all my data.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
It will erase everything, make a backup before starting the process.

faustin95 said:
these fixes are all coincidences... we need to request a definitive fix from One plus team if is a software issue.
Click to expand...
Click to collapse
Most probably hardware design fault, solution would be to redesign the phone and release a fixed design, will probably not happen unless oneplus3 is the solution.
And I second that it's just coincident behind these back and forth flashing of firmwares "solving" it, almost religious. But what are people to do when oneplus is not a company that takes responsibility for they're mistakes.

pitrus- said:
Most probably hardware design fault, solution would be to redesign the phone and release a fixed design, will probably not happen unless oneplus3 is the solution.
And I second that it's just coincident behind these back and forth flashing of firmwares "solving" it, almost religious. But what are people to do when oneplus is not a company that takes responsibility for they're mistakes.
Click to expand...
Click to collapse
If it works, its worth a try . And yeah, but we are not in any OnePlus Forum, neither debating about if they are gonna do anything about their own issue, we are trying to fix what an irresponsable company wont.

can we make together an official request to one plus to give us an answer or explanation about this? a lot of users are facing this issue, it's not normal
This is my second opt I bought that this problem has happened
sorry for my english

I had also tried lot of things but home button is not responsive at all.. H2os,exodus,oxygen 2.1 ,3.0 same everywhere
---------- Post added at 04:01 AM ---------- Previous post was at 03:59 AM ----------
Error is: when i open fingerprint setting
Enrollment not working try differnt finger or try again ... Nd fingerprint autotest not starting also

i've turned to stock i've updated to oxygen 3.0 bet and the button worked again

i think rooting installing twrp and installing different roms may be the cause of this issue

faustin95 said:
i think rooting installing twrp and installing different roms may be the cause of this issue
Click to expand...
Click to collapse
Unfortunately that is not the case, it's a hardware design bug.
However you can f-k up your finger scanner by damage your persistant-partition if you flash up and down between different ROM/bootloader revisions. But it's easily fixed by flashing the image file for that partition again.

pitrus- said:
Unfortunately that is not the case, it's a hardware design bug.
Click to expand...
Click to collapse
it's a driver issue

faustin95 said:
it's a driver issue
Click to expand...
Click to collapse
50/50 moisture sensitivity and driver issue.

Home button has been working fine for a year, installed 3.0.1 today and suddenly home button only works in OOS 3.0.1. No longer works in CM 13, yet works fine in OOS 3.0.1. Definitely a driver issue.
Tried installing OOS 2.2.1, wiping, then installing Grarak's CM 13 and home button refuses to work. Wiped system, data, cache, installed OOS 3.0.1 and home button works again. Tried wiping again and installed CM 13, home button stopped working. Wiped and reinstalled OOS 3.0.1, home button works again.

Odd thing, my phone will only work with CM13 roms and OOS 2.2.0 or less for fps and home button. Nothing will fix or ever work.

For me, the home button stopped working for a short while on Graraks, then it just jumped back to life again and I haven't had any more home button blackouts after that. If it's a driver issue, it's an extremely intermittent one.
The fingerprint scanner has stopped working from time to time at lockscreen, but this is acceptable for an official hackjobb supported scanner until official sources are released ?

Need Help with this!
Hi everyone!
I have a OP 2 for more than one and a half years now and never had any issues with it(stayed stock...) until recently. I didnt update the phone to the latest version and was putting it off, and today in the afternoon when I tried to unlock my phone it said the 'Fingerprint hardware is not available' and after unlocking the phone with the pattern, it IMMEDIATELY LOCKS ITSELF BACK !!! after split second it just locks the screen while everything is working like connection, wifi, messages, notifications, etc. but due to this I cannot access anything on the phone, can't go to settings and switch to onscreen nav bar buttons, can't force stop/wipe cache the com.fingerprints.serviceext either, tried restarting it several times, downloaded the update but can't even install it because the phone just locks! I have no idea what would fix it and I am avoiding a full reset and wipe on the phone(also based on all i have read, dont think it would fix it anyways)
If anyone knows whats the problem or has dealt with it or knows someone who has, please help me out here on how to fix this and what to do. I did not root it or flash custom ROM's on it yet so literally dont know why it happened.
Thanks,
Max

New problem with Fingerprints

So I've been searching all the internet regarding my problem and found none to have my problem.
I was using popwiz rom and after a while my fingerprint sensor stopped working with the error "An error has occureed with the fingerprint sensor. If this message appears repeatedly, restart your device."
Because I needed my G900FQ, I ignored the issue for a while. Found S7 insanity which has a fingerprint bug and forgot about the problem.
Yesterday wanted to check out official MM for my S5, and had to reflash stock lollipop. Then I remembered my fingerprint problem so I tried to set it up. I kept getting that nasty error, tried deleting cache, tried deleting data with Titanium. Reflashed stock 2 times again, nothing worked. Until I was ready to give up and go to bed. Then it suddenly started working. Managed to set it up and activate fingerprint unlock.
Now is the bummer!
I CAN UNLOCK with fingerprint if waiting about 3 seconds after turning screen on.
I CANNOT ADD FINGER through settings, I get the nasty error message.
Tried to enter factory tests and under NormalScan button says Version 0.0.0.0 and in SensorInfo says Ready and stays that way.
I tried to enter factory tests very fast after unlocking with fingerprint and I got, only once and for a brief moment, the right Version and SensorInfo, and Normal Scan showed data and graph.
Now I will try to install official MM firmware with Odin.
Anyone has any ideas to what the cause may be ? And maybe a solution ?
Thanks in advance
L.E. I installed official MM firmware and now fingerprint sensor works when unlocking and adding fingers, but when I try to unlock my phone while it is connected to a power source I get the nasty error message again and prompts me for my backup password. Any advice would be deeply appreciated.

Flash a stock ROM and factory reset?

It seems you did not read the whole thread before suggesting me this...
I did that many times. Lollipop and MM official stock... Its like the sensor is not responding in some situations , but in other situations it does. And this seems to be pretty random..
*Detection* said:
Flash a stock ROM and factory reset?
Click to expand...
Click to collapse

laurent.siku said:
It seems you did not read the whole thread before suggesting me this...
I did that many times. Lollipop and MM official stock... Its like the sensor is not responding in some situations , but in other situations it does. And this seems to be pretty random..
Click to expand...
Click to collapse
It seems you don't even know what you typed, nowhere in your OP did you mention factory resetting and then flashing a stock ROM
Only that you flashed stock ROMs, flashing stock ROMs does nothing to reset anything and will leave behind bugs from the previous ROM if the issue is with an app / data etc
Before getting clever, read what you type

It's obvious that by flashing a stock rom over a custom one will leave bugs. Did full wipe (system, data, cache&dalvik, even phone internal sd) before flashing stock, every time. Thanks anyway..
*Detection* said:
It seems you don't even know what you typed, nowhere in your OP did you mention factory resetting and then flashing a stock ROM
Only that you flashed stock ROMs, flashing stock ROMs does nothing to reset anything and will leave behind bugs from the previous ROM if the issue is with an app / data etc
Before getting clever, read what you type
Click to expand...
Click to collapse

Well maybe next time add that fairly important info to your main post, instead of hoping everyone is psychic, and then throwing a hissy fit when they suggest something you have not stated you already tried.