"Can't connect to camera" Error - Nexus 6P Q&A, Help & Troubleshooting

First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)

Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
the error when booted can be resoled by flashing the latest vendor img, or at least the one relevant to your roms version.
took me about 2 weeks to figure this out because no one would give me the slightest hint when i asked.
the error screen when it first tries to start i havent been able to resolve, and am thinking there may be none.
not sure what your camera issue could be, but i have seen cam issues from the kernel, when the switch to 6.0,1 first began to merge.
maybe test another kernel, other than that i dont know.

Samehere
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
I'm facing exactly the same issue. The camera works fine when I flash a stock based ROM like pure nexus or digitalhigh but as soon as I flash an aosp based ROM or cyanogenmod like chroma,screw'd,benzo. The camera says couldn't connect to camera and nothing seems to work. I've wiped cache, data but still no progress.
I even tried the flashable camera.zip but didn't work.

Problem Solved !!!
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera

wrahul31 said:
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
Click to expand...
Click to collapse
Thanks, I have reverted to stock ROM but I might try it soon

Related

BLack screen after installing any rom

On my note3 (n900t), after I install any rom, which I've tried CM11, CM13, ResurrectionRemix v5.6.0 and 5.6.5, and the latest version for lollipop. Every time, it will install successfully via twrp, get to the welcome/language select screen, then the screen will go black, i.e. off. Pressing buttons or tapping the screen still turns the haptic motor, but does nothing, and the back/menu lights come on for a split second at a time, and sometimes spaz out turning on and off on their own.
these are the guides I followed, if it helps:
CM13: androiding.how/download-note-3-cm13-rom-marshmallow/
CM11: Just the wiki
RR: galaxynote3root.com/sm-n9005-galaxy-note-3-roms/resurrection-remix-rom-w-android-6-0-1-for-galaxy-note-3-marshmallow/The video in this one shows it working on a n900t, so it isnt a model compatibility thing
Is there something I've done wrong here? How can I fix this and install one of these?
(sorry about the links, I made an account to try and find help)
zxsq said:
On my note3 (n900t), after I install any rom, which I've tried CM11, CM13, ResurrectionRemix v5.6.0 and 5.6.5, and the latest version for lollipop. Every time, it will install successfully via twrp, get to the welcome/language select screen, then the screen will go black, i.e. off. Pressing buttons or tapping the screen still turns the haptic motor, but does nothing, and the back/menu lights come on for a split second at a time, and sometimes spaz out turning on and off on their own.
these are the guides I followed, if it helps:
CM13: androiding.how/download-note-3-cm13-rom-marshmallow/
CM11: Just the wiki
RR: galaxynote3root.com/sm-n9005-galaxy-note-3-roms/resurrection-remix-rom-w-android-6-0-1-for-galaxy-note-3-marshmallow/The video in this one shows it working on a n900t, so it isnt a model compatibility thing
Is there something I've done wrong here? How can I fix this and install one of these?
(sorry about the links, I made an account to try and find help)
Click to expand...
Click to collapse
Did you do all the wipes? On TWRP I always press advanced(I don't use factorey reset), then select everything but internal storage and SD, then I flash and it boots just fine.
robertofelce said:
Did you do all the wipes? On TWRP I always press advanced(I don't use factorey reset), then select everything but internal storage and SD, then I flash and it boots just fine.
Click to expand...
Click to collapse
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|
zxsq said:
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|
Click to expand...
Click to collapse
Remember that rr marshmallow releases don't work for SM N900. I guess that your phone is sm N9005. Right?
If it is, is awkward that you can't flash a rr marshmallow ROM
You should be in the T-Mobile note 3 forum?
Cm12.1 for the hltetmo: https://download.cyanogenmod.org/?device=hltetmo
zxsq said:
Yep, I'm downloading the stock rom so i can get it working again, but I really want to try the rr marshmallow releases.. :|
Click to expand...
Click to collapse
got exactly the same problem....Tried to flash repair stock rom with pit, with success, but doesn't change anything
can flash 5.0 stock or 5.1 port rom but not CM or AOSP..
if you find what happen....
Hi, I've had the same issue on my Note 3 N9005. I thought it was a problem caused by Knox, so I opened the original bootloader and I deleted every Knox file; then I flashed it and it works. I tried this solution with the Resurrection Remix Rom v5.6.5, but when I updated to v5.6.7 it gave me the same problem. After a sleepless night I realized that, being the problem related to hardware components (the screen), and being impossible that such components were broken, I thought that the real problem was the kernel, so I tried to flash a compatible kernel with the Marshmallow 6 version of Android and it finally works. The kernel in question was the NetHunter one (Kali Linux), that I flashed even when I flashed the bootloader, without noticing.
rikymatteo97 said:
Hi, I've had the same issue on my Note 3 N9005. I thought it was a problem caused by Knox, so I opened the original bootloader and I deleted every Knox file; then I flashed it and it works. I tried this solution with the Resurrection Remix Rom v5.6.5, but when I updated to v5.6.7 it gave me the same problem. After a sleepless night I realized that, being the problem related to hardware components (the screen), and being impossible that such components were broken, I thought that the real problem was the kernel, so I tried to flash a compatible kernel with the Marshmallow 6 version of Android and it finally works. The kernel in question was the NetHunter one (Kali Linux), that I flashed even when I flashed the bootloader, without noticing.
Click to expand...
Click to collapse
My note 3 smnN900t is doing that same thing and it sucks because I know I did everything perfectly!! What Kernel were you able to flash for it and where did you download it from? By the way thanks in advance for any help and info you can give!!!
Wrong forum
forum links .
http://forum.xda-developers.com/showthread.php?t=2574886
Please help I am having the same issue. Did anyone find a solution for this ?

"Camera error please restart camera"

I am on stock rom and rooted using the Super SU method. The only things I've flashed are the wifi fix, and edited build.prop to unlock tethering. My camera app will not open, and I get this error every single time. Doesn't work in instagram, snapchat, nothing. Anyone know what may be causing this?
Anyone? I would really like to get my camera working again
had the same problem today. restarted the phone and it worked again
ckret said:
had the same problem today. restarted the phone and it worked again
Click to expand...
Click to collapse
I've restarted several times even gone so far as to install a new OS. I'm thinking about undoing the changes just to fix this.
Try booting in Safe mode
ckret said:
Try booting in Safe mode
Click to expand...
Click to collapse
Camera still doesn't work
your cam may be disconnected from the motherboard. try claiming warranty
Wiped and installed the AOKP ROM and that fixed it.. Could've been the ROM or could've been the wipe, although I wiped several times before and it didn't fix it.
did you get the error again?
I had the same problem and I installed AOKP rom which fixed it at the beginning but after less 1 day the error back again.
now I'm on stock rom .35 (rooted with Magisk) and no camera error so far after 4 days
As far as i know, it is due to custom kernel, you may have installed that.. try flashing stock rom without any custom kernel..
Mayanknagpal.nm said:
As far as i know, it is due to custom kernel, you may have installed that.. try flashing stock rom without any custom kernel..
Click to expand...
Click to collapse
yes, I had custom kernel first time I got the error.
but then I got it also with custom rom.
now I'm on stock rom and stock kernel....but does it mean that I can never flash custom rom/kernel because of that error?
marcol87 said:
yes, I had custom kernel first time I got the error.
but then I got it also with custom rom.
now I'm on stock rom and stock kernel....but does it mean that I can never flash custom rom/kernel because of that error?
Click to expand...
Click to collapse
Custom roms do not have that error... and on stock rom you can use elementalX 2.0 , it is made for the .67.. so the camera issue is resolved.. i think this will help
I had this error on Stoneware .67 (stock based ROM) and resolved it by dirty flashing Stoneware and Magisk v.13 again.
and I had this error also on AOKP rom
I have been having this problem on the Stock ROM, non-rooted, for quite some time now. I have no idea what's causing this error. When I open it sometimes, it just throws an error. If I close it and open it again, it works as it should. It's very annoying.
I had the same thing, flashing roms didnt fix it so i flashed stock via RSD lite and everything was back to normal.
Same issue here, completely stock unrooted. This is not the first Android device I've had that's struggled to connect to the camera consistently... how hard can it be?
Can people getting this error try to disable the image stabilisation in video mode please? One of the errors I see when downloading a bug report refers to the stabilisation code and I've not had the "please restart camera" message since switching it off. Could be coincidence though as it's not like I get it every time the camera loads...
Hello ,
I tried rooting my Moto G5 using Moto G5 toolkit (flashing superSU). t
Then I flashed TWRP and Flashed the WLAN_CUSTOM
Now i get that generic warning screen of unlocked boot loader however My phone is not rooted. and I cant open camera at all , getting error as " Camera Busy - Camera unable to start. If this happens again, please power off your phone and restart."
Can someone help me fix this camera issue? or just help me to revert back as it was previously no root nothing, I guess this TOOLKIT has some bugs in it.
Any help will be appreciated as I am newbie with this android development.
the.MindHacker said:
Hello ,
I tried rooting my Moto G5 using Moto G5 toolkit (flashing superSU). t
Then I flashed TWRP and Flashed the WLAN_CUSTOM
Now i get that generic warning screen of unlocked boot loader however My phone is not rooted. and I cant open camera at all , getting error as " Camera Busy - Camera unable to start. If this happens again, please power off your phone and restart."
Can someone help me fix this camera issue? or just help me to revert back as it was previously no root nothing, I guess this TOOLKIT has some bugs in it.
Any help will be appreciated as I am newbie with this android development.
Click to expand...
Click to collapse
I had the same issue as you after using the toolkit, did you fix it?

[Rom] Mokee 7.1.2 for Lenovo Vibe Shot

https://download.mokeedev.com/?device=zoom
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
X10MINISTER said:
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
Click to expand...
Click to collapse
Rom works but it wasn't maintained. No new bug correction from february.
stuccamelo said:
Rom works but it wasn't maintained. No new bug correction from february.
Click to expand...
Click to collapse
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
X10MINISTER said:
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
Click to expand...
Click to collapse
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
stuccamelo said:
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
Click to expand...
Click to collapse
So, it mean that u also facing the hotspot problem.?
Can u change/install fonts in mokee roms? Cause I have an issue with changing font style using iFont apps..its say installed but after reboot font style doesnt change. Any solution?
linux shall eternally bloat all search engines with expired ?=
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Dr Tungsten said:
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Click to expand...
Click to collapse
There are a lot of recent updates for this rom. I flashed the most recent (2017-11-21 date). I didn't make a lot of testing but the problem you refered has been solved and the performance and stability seems good.
The only issue I noticed so far is that the phone does not start automatically from the shutdown state when an alarm is set.
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
GeorgeTsak said:
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
Click to expand...
Click to collapse
This is not my main phone right now so I spend very limited time using or testing it but you are right, I have just checked that with this ROM the device is unable to pass the SafeNet test so far. On the other hand I have not problems at all playing videos with youtube app or rooting the device. I'm using supersu v2.82 and TRWP-3.0.2-0 for lenovo 6.0 by wzsx150 (didn't try Magisk)
has anyone managed to install this ROM?
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
mrtowel said:
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
Click to expand...
Click to collapse
I think you need a different TWRP version. Try this one:
https://drive.google.com/file/d/0B1Sms71Oe6FIQnl4STlhSk96b0E/view?usp=sharing
Help me!
I'm new to these things. Installing roms and ****s. Can someone help me with the step by step procedure of installing this room on my Lenovo vibe shot. Thanks in advance.
The same probvlem with TWRP
piccolo2k2 said:
I think you need a different TWRP version. Try this one:
Click to expand...
Click to collapse
I have exactly the same problem.
Did you resolved it? Tried also mentioned "Twrp by rahul.rar", but the same problem - unable to mount /system partition.
Thanks for reply,
st
bug fix?
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
hhaekal said:
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
Click to expand...
Click to collapse
Im using it right now.. Im still have the problem with:
-hotspot tethering,bluetooth tethering
-usb mtp
-suddenly shutdown when on wifi
Have someone had the problem with delay in receiving whatsapp messages?
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Alex_135 said:
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Click to expand...
Click to collapse
Hi,
I'm using the release and there is no bug with WIFI.
Linaxx said:
Hi,
I'm using the release and there is no bug with WIFI.
Click to expand...
Click to collapse
How about wifi tethering problem? Does it remain error when wifi tethering are enabled?

Custom ROMs result in black screen

Hi all,
I'm new to the device so I'm maybe doing something wrong but I don't think so. I got the device with a terribly cracked, I flashed Pixel Experience (Android 10) as it's what I've had on my Nexus 5x, everything was working fine so I proceeded to replace the screen. I replaced it with one from Aliexpress which seems legit.
The phone then wouldn't boot, or seemed not to boot. I saw the splash screen then a black screen. The system did boot as I could see the capacative keys light up and sounds working, I just couldn't see any image on the screen. After a while trying to flash other ROMs and other TWRP versions (at this point TWRP showed up as a black screen too) I found that the following solution solved my problem.
https://forum.xda-developers.com/mi-a1/how-to/solved-mi-a1-bootloop-t3973131
This is fine, I can use the stock ROM and update it to the latest version but cannot use any AOSP based ROMS and still cannot use any other recovery apart from the one used to solve the "bootloop".
Does anyone have any idea how I can solve this? I thought the screen was maybe a weird version that needed some additional drivers but the strange thing is that it works for the stock ROM.
Regards,
Simon
Hi:
simonkerr said:
Hi all,
I'm new to the device so I'm maybe doing something wrong but I don't think so. I got the device with a terribly cracked, I flashed Pixel Experience (Android 10) as it's what I've had on my Nexus 5x, everything was working fine so I proceeded to replace the screen. I replaced it with one from Aliexpress which seems legit.
The phone then wouldn't boot, or seemed not to boot. I saw the splash screen then a black screen. The system did boot as I could see the capacative keys light up and sounds working, I just couldn't see any image on the screen. After a while trying to flash other ROMs and other TWRP versions (at this point TWRP showed up as a black screen too) I found that the following solution solved my problem.
https://forum.xda-developers.com/mi-a1/how-to/solved-mi-a1-bootloop-t3973131
This is fine, I can use the stock ROM and update it to the latest version but cannot use any AOSP based ROMS and still cannot use any other recovery apart from the one used to solve the "bootloop".
Does anyone have any idea how I can solve this? I thought the screen was maybe a weird version that needed some additional drivers but the strange thing is that it works for the stock ROM.
Regards,
Simon
Click to expand...
Click to collapse
I'm in the same situation. I think these screens are not 100% compatible so it seems a hardware issue.
Maybe using vendor partition but i'm so stucked as you.
My phone can't hotboot any official recovery although i can boot flashed recovery only if i boot slot a not slot b.
Stock roms boot always using slot a but tried Lineage (thats uses slot b) and got always black screen.
I'll keep reading and trying to solve it.
Regards.
simonkerr said:
Hi all,
I'm new to the device so I'm maybe doing something wrong but I don't think so. I got the device with a terribly cracked, I flashed Pixel Experience (Android 10) as it's what I've had on my Nexus 5x, everything was working fine so I proceeded to replace the screen. I replaced it with one from Aliexpress which seems legit.
The phone then wouldn't boot, or seemed not to boot. I saw the splash screen then a black screen. The system did boot as I could see the capacative keys light up and sounds working, I just couldn't see any image on the screen. After a while trying to flash other ROMs and other TWRP versions (at this point TWRP showed up as a black screen too) I found that the following solution solved my problem.
https://forum.xda-developers.com/mi-a1/how-to/solved-mi-a1-bootloop-t3973131
This is fine, I can use the stock ROM and update it to the latest version but cannot use any AOSP based ROMS and still cannot use any other recovery apart from the one used to solve the "bootloop".
Does anyone have any idea how I can solve this? I thought the screen was maybe a weird version that needed some additional drivers but the strange thing is that it works for the stock ROM.
Regards,
Simon
Click to expand...
Click to collapse
Have you made any progress?
gsausalito said:
Have you made any progress?
Click to expand...
Click to collapse
Thanks for your interest but I've made no progress and actually given up on it. I'm sure the issue could be resolved by buying a new, more compatible screen but I'm not going to put any more money into the phone.
As far as the software solution goes, I've tried almost every combination of ROM + Kernel i can think of but the only thing that works is the stock ROM.
I'm going to close this thread as I don't think it's much use to anyone.
Regards
Sorry for posting here, but i am in the same and i noticed that flashing canting 4.9 kernel gives display for like 8 seconds after screen turns off. May it be a kernel config issue? if anyone in this forum could answer this i could try and change it. Also flashing stock kernel on custom rom solves the problem but makes other thing fail
Hello, I've got the same issue. Is there any solution ? Or, at least, any clue to work on it ?
EDIT: I finally done it!
with this kernel (OC) : https://forum.xda-developers.com/t/...rkernel-v3-1-nonoc-and-oc-12-11-2020.4186317/
And this rom : https://forum.xda-developers.com/t/rom-11-0-official-crdroid-7-1-tissot-13-11-2020.4195351/
I installed this kernel, cause you was saying it is probably a kernel issue, so I tried to look for most recent kernel.
And then, it worked, so I think you was right.
I can't be sure it will work with all ROM, but I think.
Hello Mi A1 friends.
So yesterday I decided to change my crack LCD screen and to my surprise the phone boots into Xiaomi Logo and then after that its just a black screen. Message and other notifcation sounds still come in which means that the phone mange to boot into home screen, just with nothing to display. At the time of changing screen, I am on stock kernel and Pixel Experience 10.
Gonna flash back to stock pie(9) rom and see how it goes from there.
Deezio said:
Hello, I've got the same issue. Is there any solution ? Or, at least, any clue to work on it ?
EDIT: I finally done it!
with this kernel (OC) : https://forum.xda-developers.com/t/...rkernel-v3-1-nonoc-and-oc-12-11-2020.4186317/
And this rom : https://forum.xda-developers.com/t/rom-11-0-official-crdroid-7-1-tissot-13-11-2020.4195351/
I installed this kernel, cause you was saying it is probably a kernel issue, so I tried to look for most recent kernel.
And then, it worked, so I think you was right.
I can't be sure it will work with all ROM, but I think.
Click to expand...
Click to collapse
Sry for reply to an old post, but how did you do it? How did you flash kernel when you can't enter twrp because of screen issues? I have exact the same problem, where stock rom works but everything else cause blank screen. Also can't boot to twrp - probably the same reason.

Redmi k20 gets stuck while trying to play sound

Since Friday my device is restarting automatically with error DEVICE CLOSED UNEXPECTEDLY
I tried hard reset went to service centre they did an software upgrade and then a downgrade to 12.0.3 from 12.0.5 but nothing worked
And now when i try to play any sound whether through YouTube , Music etc it is just crashing
Even the Sound settings are not opening and i couldn't connect to calls either and volume keys are also not working
Seems like hardware problem
But other things are working
Are you sure they did upgrade and downgrade?
Was it full wipe?
It recommend to flash custom ROM and see if sth cbange
Yes they did downgrade from 12.0.5 to 12.0.3
And I had full wiped from recovery 2-3 times
And yesterday I noticed one more thing my front pop-up camera was working fine but when I enabled sound effect for it
It just freezes
Ok, so that's officially India MIUI issue
try this
This is ultra battery saving option related and they're working on an update
i have already tried all these but nothing works and how my device is stuck in fastboot mode while trying to flash stock rom through mi flash tool
You mentioned earlier that phone is boiting, but it restarts often.
What error in miflash?
Yes it was booting then only when I tried to flash miui11 through mi flash tool it got stuck in fastboot mode
Mi flash was giving crclist error everytime
Anyways I have successfully flashed miui 11 through twrp but the above problems are still there
I had exactly the same issue with this device.
Then tried 5/6 custom roms of android 11.
Nothing worked, every os had it's own issue.
Then lastly I've installed PIXEL EXPERIENCE 10 PLUS rom and the phone started to work fluid.
I have a same problem. Whenever accessing sound, if freezes and restarts! Went to Mi center. They said they have to replace the motherboard . Actually it's one of the IC that's malfunctioning... Here's a video -
Let e know If there's any ROM that gets around this issue
nilanjan.joy said:
I had exactly the same issue with this device.
Then tried 5/6 custom roms of android 11.
Nothing worked, every os had it's own issue.
Then lastly I've installed PIXEL EXPERIENCE 10 PLUS rom and the phone started to work fluid.
Click to expand...
Click to collapse
Didn't work for me
shrae said:
Let e know If there's any ROM that gets around this issue
Click to expand...
Click to collapse
Pixel Experience 11 plus worked fine, except the Audio problem still remains :-(
Gopalakrishnan V said:
Pixel Experience 11 plus worked fine, except the Audio problem still remains :-(
Click to expand...
Click to collapse
Did you manage to solve your problem? I have the same issue and dont know what to do
levarete said:
Did you manage to solve your problem? I have the same issue and dont know what to do
Click to expand...
Click to collapse
Nope the audio issues cannot be fixed with any software. I think it's caused due to some IC failure.
You would have to change the motherboard to fix the issue or you have to be a professional electronics engineer who knows and have the equipment for micro soldering.
The same issue was encountered with me also. I am in great distress right now. Tried more than 30+ ROMs (including recover, fast boot, custom, and stock), but nothing helps.
IF you find anything please update here.. THat’ll be a great help indeed!!
Here’s my thread: https://forum.xda-developers.com/t/...dphone-and-many-features-not-working.4309769/

Resources