Samsung Galaxy Grand Prime sm-g530 Hard Bricked. - Galaxy Grand Prime Q&A, Help & Troubleshooting

I have Galaxy Grand Prime SM-G530 and it wont boot.
No recovery mode,no odin or download mode.
means hard bricked...
any solution??

Hook it up to the pc and check if the pc will detect it in device manager

yes the pc detect it for a second and suddenly disconnected it repeats rapidly.

Try a diff usb cord the pc should detec it as qualcomm blah blah blah if the pc detects it and stay

no the pc not detect it at all...
i tried it on another pc too but it still not detect any way

Well Your only Way to fix is to bring it to the nearest samsung service center Since the pc cant detect All hope is lost

Related

[Q] Odin can't detect download mode.

So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me

My computer doesn t detect my samsung A5

Hello everyone , my computer doesn ' t detect my samsung a5 , i tried installing kies 2 and 3 and installing samsung usb drivers but still nothing , when i plug it the phone starts charging but it doesn t show on the computer , any ideas about what i should do ?
thank you

Samsung grand 2 Hard bricked device

i had my Samsung grand 2 G-1702 hard bricked while installing recovery.
unfortunately, i installed incompatible version of recovery with TWRP, The process goes wrong.
there is no more boot, the screen always off, no charging indicator ...
when connected to PC gives unrecognized device, no boot to recovery or download mode ...
any solution, please ?
thanks in advance
What's up when you connect your phone to computer?
Can computer detect QHSUSB_BULK??
Mr.Spirit said:
What's up when you connect your phone to computer?
Can computer detect QHSUSB_BULK??
Click to expand...
Click to collapse
Nope my pc was unable to detect the device.
I had the same.. I was trying to do something, but nothing worked... Even JTAG in service didn't help. Servicer told, that it was a problem on some special memory integrated by the silicon with a motherboard... I can't do anything with this, then I bought a new phone XD

MTP notification problem

I have Samsung grand prime SM G530H xcu.. i am experiencing a problem that mtp notification is not showing while connected to pc it only charges the phone.. I have tried many datacables and by connecting to different computers but no use.. i wantbto root the phone but cant be done wd out debugging and it shows root failed.. odin also did not detect my phone and pc also is not showing anything.. reinstalled all the drivers but no use..
Please help me in this regard..
Flash stock ROM
stock rom already installed..
Try ticking the USB debugging option in the developers option or vice versa. Another way is if you have another Samsung phone, plug that when the device drivers configure them completly then unplug that and plug this phone immediately
Uninstall driver and try again

Odin not detecting device on download mode

Help! i want to flash official firmware -GT i9500
In past i was able to flash via odin on same pc and now its not showing usb all driver installed
already try changing data cable and diffrent ports i even tried reinstalling win7 and diffrent version of kies and drivers
i dont have other pc or laptops . other samsung phone is showing on download mode on same pc.
odin only shows my phone when i pull battery while connected to usb on download mode and i can flash twrp recovery or
any small size file but cant flash full firmware its disconect after some seconds
it connects well on mtp mode and twrp.
I have the same problem with my S4. I tested J5 2016 and it is connecting properly with the same cable, drivers, etc, either with odin or in normal situations when phone is on. also S8+ connects with its cable and same drivers, etc. But S4 is repeatedly connecting-disconnecting, either in downloading mode or normal situations.
I installed this driver "https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows" which is "SAMSUNG USB Driver for Mobile Phones 1.5.51".
imanam said:
I have the same problem with my S4. I tested J5 2016 and it is connecting properly with the same cable, drivers, etc, either with odin or in normal situations when phone is on. also S8+ connects with its cable and same drivers, etc. But S4 is repeatedly connecting-disconnecting, either in downloading mode or normal situations.
I installed this driver "https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows" which is "SAMSUNG USB Driver for Mobile Phones 1.5.51".
Click to expand...
Click to collapse
Already tried it didnt work. i dont have disconnecting issue on normal mode i can send and recive via usb mtp to pc for your disconnect problem if it disconnect after phone screen off, go to control panel>sytem &security>power option>change paln setting>change advanced power setting>expand all usb setting =enable change to disable.
If anyone has solution to OP please reply
Thank you!
I eventually succeed! Nothing special just used my brothers' laptop (win 7). same cable, same driver (1.5.51).
My primary problem was WiFi and Bluetooth not working. I was hopeful flashing will solve it but unfortunately no. Seems a hardware problem.
With your recommendation (enable to disable) i saw no change with my pc (win 7).

Categories

Resources