Hi,
I have this problem for a long time... When i connect my I9000 to my PC i get this message " device has malfunctioned ". I have installed all the necessary drivers including kies.! I have Galaxy Ace which connect and works fine in the same PC. Only when i connect my I9000 it only starts charging and nothing happens to my device.
Can you guys help me out??
Any solutions>>!??
Try to uninstall Kies and all the drivers that came with it and then reinstall only the drivers. This should work
hi , my 530h is laaging sometimes , connected with pc , install drivers , phone drive work , but does't connect or show in samsung kies or odin in flash mode.
plz help :crying:
I have Galaxy Grand Prime SM-G530 and it wont boot.
No recovery mode,no odin or download mode.
means hard bricked...
any solution??
Hook it up to the pc and check if the pc will detect it in device manager
yes the pc detect it for a second and suddenly disconnected it repeats rapidly.
Try a diff usb cord the pc should detec it as qualcomm blah blah blah if the pc detects it and stay
no the pc not detect it at all...
i tried it on another pc too but it still not detect any way
Well Your only Way to fix is to bring it to the nearest samsung service center Since the pc cant detect All hope is lost
hey,everybody .
this is my first post here , so please excuse my ignorance .
s4 att , android 4.2.2 , baseband i337UCUAMF3 , KERNEL 3.4.0-812098 , BUILD # JDQ39.I337UCUAMF3
When connected to pc , it starts charging , put pc does not see it .
tried 10 different usb cables ( including samsung original ) , tried dial *#0808# made sure it shows mtp+adb
tried 4 different computers from windows xp . up to windows 10 , kies does not see it , odin does not see it , pc does not see it .
i put it in download mode , no change .
updated windows media player , installed google sdk , nothing !
reset to factory , several times , did it from the phone menu , and from recovery , nothing !
i put 4.2.2 on a micro sd card , went into recovery , apply update from external i get error (error in tmp/sideload/package.zip status 7 )!!!!
does not connect via adb either !!!
PLEASE HELP !!!!
You did not mention the samsung kies, smart switch in your post. Usually I use those software to check whether my pc has samsung usb driver properly installed.
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
mhk9626 said:
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
Click to expand...
Click to collapse
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
sway8966 said:
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
Click to expand...
Click to collapse
tried smart switch too , nothing !!!
Sounds like the USB port of flex cable may be damaged.
audit13 said:
Sounds like the USB port of flex cable may be damaged.
Click to expand...
Click to collapse
you were the only one who tried to help . so , many thanks !!
No worries, we're here to help and learn from each other. Did you have an opportunity to try any other possible solutions? Do you have access to another flex cable?
Good afternoon friends I'm new here I apologize if I failed at something.
So my smartphone is a Galaxy A5 2016, I have root in it xposed with a modulo only etc.
It stopped reading USB to transfer data, it loads on the PC but not the message of neither device nor recognized device nor installed, (before I used the sidesync with it) and nor does the otg that recognizes normal does not open anymore. that is:
Does not recognize pendrive via ON THE GO (OTG)
Does not open on PC and neither does the sign of life
what to do ?? Can help me I'm with the original Android 6.0.1
URGENT FRIENDS :chorando: