Database Users

PC&Odin not able to detect phone via USB after flashing custom ROM: tried dif pc too

PC&Odin not able to detect phone via USB after flashing custom ROM: tried dif pc too
Hi all,
I've recently flashed this awesome ROM: [GearCM][i9500][4.4.4] Optimized CyanogenMod 11 for Samsung Galaxy S4 [20140912] in my device. ROM works great, very stable, fast performance, however since install, I am not able to detect my phone via USB. Not even ODIN sees the device connected.
Was doing my research before posting, so I will let you know what I've tried which was recommended in other posts and google:
1. Re-installed Samsung USB Drivers: No Go
2. Used different USB Cables (using stock one that came w/ phone right now): No Go
3. Tried different USB Ports: No Go
4. Tried a different PC: No Go
5. Yes, I am testing with my screen unlocked
Anything else I can try? Maybe a setting in my Phone?
Thanks!

Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port

By the way, the device charges normally when connected to my computer USB.

Lennyz1988 said:
Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port
Click to expand...
Click to collapse
Good call. Odin is not detecting the phone in download mode-- so I guess we can eliminate problem in the device configuration.
I'm going to try again in another PC and different cables. Maybe my Cable went bad, sucks because it's pretty new? Going to copy Odin to a pen drive so I can try in friends computer. On other PCs I only tried connecting in Windows-- no download mode & odin.

Ok, so I was able to get working back.
I enabled developer options by going in about and clicking the build 7 times. Proceeded to go to Debugging options and selected Android Debugging marked. Reinstalled Drivers again, then it showed PC connected as Media Device on notifications. I clicked there and changed to Camera PTP and then back to MTP.
Now I'm able to see the Device again!
No idea why I was not able to see it in Odin while on download mode, however, I can see it now even when not download mode.
Thread can be closed, thanks!

[Q] USB Automatically Disconnecting after two sec.

I am not able to connect my phone to my pc using data cable neither in Download mode nor in Power on.
The problem is that USB disconnecting automatically after two sec, and windows was unable to recognize it.
I tried connecting Another phone using the same data cable and pc, it worked fine, it was GTS 5830i.
is there any way to solve this issue?
please help me.

What operating system are you using?
For example in Windows 8.1 you need to do the following
Download USB drivers (see my firmware thread link in signature or at top of dev section)
Right click the setup file
Click properties
Select compatibility tab
Select run this programme in compatibility mode for
Select windows xp sp3
Select apply
Run the setup
It will now run & install
Note any other operating system just run the setup normally
Now plug your phone in via usb
Now plug in any other USB devices eg a wireless mouse dongle
Windows 8.1 will now recognise the device

I am using windows 7 ultimate.
By saying im able to connect other phone to the Pc, I mean all USB Drivers are
Correctly installed.
I think its a issue related to my phone, us there any settings to change? Like *#7284%?

Shinojmkd said:
I am using windows 7 ultimate.
By saying im able to connect other phone to the Pc, I mean all USB Drivers are
Correctly installed.
I think its a issue related to my phone, us there any settings to change? Like *#7284%?
Click to expand...
Click to collapse
Check to make sure there is no dirt and debris in the USB connection on phone - you might want to clean it with cleaning solution (whilst the phone is off)
Other than that you can flash stock rom via odin to make sure there are no software problems with phone
There's no settings as far as I know that will stop USB connecting unless you have deliberately looked for & changed something relating to it but I can't think of anything

Well I am not able to connect to odin.
Now i use a custom Rom i just want to install original rom using odin.
i tried cleaning USB port,

Shinojmkd said:
Well I am not able to connect to odin.
Now i use a custom Rom i just want to install original rom using odin.
i tried cleaning USB port,
Click to expand...
Click to collapse
If you have
Installed the USB drivers
Using Odin version 3.07
The firmware from my firmware thread
Using rear USB ports if on pc
Put the phone into download mode (Vol down home button power button)
Pressed Vol up in download mode to start connection
Then the only thing left is a hardware fault or user error - both of which I can't support here

[HELP] USB-MTP no longer working on S4 i9505 but ODIN 3.09 works fine

Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me

loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.

GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager

loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?

Please anyone help me... I tried alot

Somedays ago, i rooted my samsung galaxy s6 edge plus (sm-g928f). I was checking the settings and by mistake i have turned off the developer mode in settings and when i restarted mobile it is showing frp lock neither i can turn on mobile nor i can go to recovery... There is only one option for flashing firmware through download mode from odin but my mobile doesn't connects to any pc and laptop, I have checked with diffrent cables in different computers with all samsung drivers installed.
so, please tell me the solution. I can only charge the mobile now. I cant turn on mobile and recovery because of frp lock and neither connect through download mode as usb not detecting at all..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
Please Develeopers and experts please give me the solution for this problem.

Use ODIN to flash stock firm for your device - go to download mode and flash.

avenge said:
Use ODIN to flash stock firm for your device - go to download mode and flash.
Click to expand...
Click to collapse
As I already mentioned,I cannot connect mobile to PC through usb,it's download mode is not detecting in any PC in odin even all samsung drivers installed.

What USB drivers did you install?
Try removing the ones you have installed and then booting into download mode and letting windows get them automatically. I haven't installed any drivers for my phone, I plug in the USB and Windows detects and downloads them.... I'm on windows 10.

Samsung SM-7387V Download Mode "USB Device Not recognized"

So I'm trying to flash a Samsung SM-7387V Galaxy Tab A with new firmware as it currently has Knox / Mobicontrol
So it is locked down and you can't do a factory reset. I'm using Odin 3.13.1 and have the firmware which has the 4 files needed. I was able to initially get it to show up on Com6 is Odin but after a few min it complained it couldn't connect to the com port. After that any time I'm in Download mode windows complains it doesn't recognize the device. No amount of uninstalling / re-installing the Samsung USB Drivers, changing USB ports, windows reboots has fixed anything.
The only time I can get Winblows to detect the USB device properly is when booting it up normally.
So any suggestions on what gives? Also suggestions on if I'm on the right path to restore the device to remove Mobicontrol.

rickblues said:
So I'm trying to flash a Samsung SM-7387V Galaxy Tab A with new firmware as it currently has Knox / Mobicontrol
So it is locked down and you can't do a factory reset. I'm using Odin 3.13.1 and have the firmware which has the 4 files needed. I was able to initially get it to show up on Com6 is Odin but after a few min it complained it couldn't connect to the com port. After that any time I'm in Download mode windows complains it doesn't recognize the device. No amount of uninstalling / re-installing the Samsung USB Drivers, changing USB ports, windows reboots has fixed anything.
The only time I can get Winblows to detect the USB device properly is when booting it up normally.
So any suggestions on what gives? Also suggestions on if I'm on the right path to restore the device to remove Mobicontrol.
Click to expand...
Click to collapse
Additional notes: I've tried on a second PC with a different USB cable, same results as soon as you connect it in the boot loader mode. Both systems complain it can't recognize the device. Windows 10 systems.
I was going to include some photos of the boot screen / windows error, but it seems you can't attach photos or new members can't?

New here so this was my first post, do first posts show up automatically as it seems to be a ghost town? Not sure if this topic is viewable? Thanks!