Related
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
You need the driver
1234556789 said:
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
Click to expand...
Click to collapse
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.
Hope it works!
no message here
tedr44 said:
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.Hope it works!
Click to expand...
Click to collapse
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Vintage76 said:
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Click to expand...
Click to collapse
Do you have a link -and can i use it for DE version?
on the official side i only find the same i have:
Eee Pad Transformer TF101 Firmware: V9.2.1.11 Only for DE SKU (Android 4.0.3)
--edit : found it - using the update OTA in the transformer--
I really hope it works - The update works- but the same Problem........
kind regards
gandalf
Is your device rooted?
I fill find the link and post it.......
---------- Post added at 12:56 AM ---------- Previous post was at 12:49 AM ----------
Here you go, read through it carefully.. DE version is untested.
Must be rooted.....
http://forum.xda-developers.com/showthread.php?t=1334673
No, it is not rooted.
-And i had already update to newest official version by OTA- .but thanks
Kind regards
Gandalf
1234556789 said:
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
Click to expand...
Click to collapse
So the device driver is already installed but still no connection, maybe you should turn on usb debugging, try this:
Go to Settings, Developer options and check USB debugging then connect your usb. If it doesn't work, then your ICS update may have caused the problem. You may have to restore your tablet to HC and recheck your usb connection before upgrading to iCS. Good luck!
Did you try this?
Under Settings/Storage there is a menu in the upper right corner.
Open it and then check MTP.
Click to expand...
Click to collapse
Nebucatnetzer said:
Did you try this?
Click to expand...
Click to collapse
Good info, I wonder if the ICS update disabled this setting? That would definitely cause the usb connection problem.
I know from the GNEX that it happens sometimes if you're flashing a custom ROM so I thought it might be the same case here.
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
jddunkley said:
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
Click to expand...
Click to collapse
Did you try Nebucatnetzer's advice on Post #10, that may help? Click the MTP off and on a few times just to make sure then leave it on.
Yeah I did try that, and I turned on USB Debugging as well just to see if it would work. Still no luck Does anyone know if the ROM from the "[UPDATE] CWM - Stock + Root - 9.2.1.17 US Updated pi/2012" thread does a full wipe like it's a new install? Or is it just the update itself?
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
tedr44 said:
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
Click to expand...
Click to collapse
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
jddunkley said:
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
Click to expand...
Click to collapse
Good for you, my B50 is doing great after ICS and yours should be no different. Make sure your wifi is exclusively servicing your tab so there's no interference. Be patient, it will finish in due time. Talk to you later!
If we already have this thread. Does any one have an idea why adb can't see my TF?
Driver is installed, devices shows up under device manager and I can access the storage. But adb isn't working. USB debugging is checked.
It works with my GNEX though.
Updated to ICS, lost root and usb connection. I have the drivers installed and nothing happens. I've messed with MTP, USB Debugging and nothing works. If I boot the transformer into recovery and then connect it to my PC it can see the connection but does not have the proper drivers for it though.
So I had flashed my n8013 to the Germany n8010 4.1.1 firmware using this:
http://forum.xda-developers.com/showthread.php?t=2048213
Then today I tried to restore back to UEALH2 n8013 stock:
http://forum.xda-developers.com/showthread.php?t=2100971
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Here is what you do
Go into recovery do a complete wipe
Download the rom from here http://www.hotfile.com/dl/178484761/092fdea/N8013UEALI3_N8013XARALI3_XAR.zip.html
and Flash it with Odin, should work fine
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Click to expand...
Click to collapse
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Can't reach stock recovery
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
vypor87 said:
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
Click to expand...
Click to collapse
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
BarryH_GEG said:
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Click to expand...
Click to collapse
The first link was trying to use the US ICS Rom via Odin. My note won't get in a functional state either way
BarryH_GEG said:
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
Click to expand...
Click to collapse
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
edit: sorry Barry I'm getting you confused with HG! in the other forum page.
vypor87 said:
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
Click to expand...
Click to collapse
That's swell. Can you get in to download mode?
BarryH_GEG said:
That's swell. Can you get in to download mode?
Click to expand...
Click to collapse
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
Here is the official md5 file for the XAR N8013 Note 10.1: http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=XAR&os=1&type=3#firmware
Hope this helps.
BarryH_GEG said:
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
Click to expand...
Click to collapse
K, downloading right now. I actually spent the $9 to get a month subscription to hotfile to download faster. Not helping much as it's not my best bandwidth but i hope it works!!
Holy s*** it's aaaaa-live!!! It's alive it's alive!!! DEF-CON lowered now. I had another UEALH2 rooted tar on my machine and I cannot remember which forum page I downloaded it from sadly. I had downloaded it back in August on the 24th. It's dated the 22nd of August. The other tar I downloaded was dated the 22nd also but it was different somehow. The name scheme on this one is UEALH2_rooted_system.tar and it worked. Unlike UEALH2_prerooted.tar. That one almost screwed me up! I need to find where this original file came from. Either way I'm back on ICS and plugged into a wall. It's taking me through all the initial setup crap right now so it's hard to tell how low I got it but I started this night flashing with about 56% battery. And when you start with half a battery you start regretting things shortly after when you botch something up big time!
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Spoke too soon. This is the one where the touchscreen stops working. FML... Still downloading the HotFile link of the image Barry sent.
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue.
Click to expand...
Click to collapse
vypor87 said:
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Click to expand...
Click to collapse
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
RandomAwesomeGuy said:
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Well heres the worry about the charging I had. Motorola phones are not very forgiving to charge unless youre booted or on the battery charge screen. Thats why I was freaking out. I kies updated from that same botched image and it seemed to resolve my touchscreen issue. Time will tell. Only problem is now I forgot to protect root before the update so superuser doesnt know where to find the binaries. Does the CF Autoroot still work with 4.1.2? If so ill just use that.
Either way, enough problems cleared for one night. Im going to bed. Gotta wake up for work in the morning.
Sent from my GT-N8013 using xda premium
RandomAwesomeGuy said:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Hopefully nothing. Mine's just the direct link to the Samsung-Updates upload. Where files exist in both places I post Samsung-Updates version because you don't need to register.
BTW thank you guys. It's always good to know that the community is looking out for each other. I think once I'm "100%" stock TriAway and all I ain't flashing to a different stock base again. Lol. Although I do like the stock German folders vs the crappy US ones that are literal folders that are ugly. Guess I need to find a new launcher. And Barry thanks for helping me enjoy 4.1.1 in the meantime!
Sent from my DROID RAZR using xda premium
The german huaweiblog got his hands on new firmware for Huawei Ascend Mate 7.
Device: MT7-L09 West European
Link http://www.huaweiblog.de/huawei/huawei-ascend-mate-7-b127-firmware-leak-erster-erfahrungsbericht/
Downloadlink Should be https://mega.co.nz/#!0g83WTgY!gonoZteVZN3RzqCMqUMeSYfeOKegPgI_I0-baTZe53k
For people already rooted & on cwm recovery, how can the update be done?
is it
fastboot flash recovery recovery_stock.img
Just flashed it. Seems like it reset everything. Setting up my phone from scratch now....
That's what they mention. Everything will be erased. There is a word file describing the procedure in the zip provided that says so.
Nothing is moved.
You need to flash the stock recovery
If you do a local update, nothing is erased.
lrcquest said:
For people already rooted & on cwm recovery, how can the update be done?
is it
fastboot flash recovery recovery_stock.img
Click to expand...
Click to collapse
If you flashst on Power Vol, no. Can you make custom recovery on it. For root you can then use the recovery_h60.img. Still works. Then have to do is flash SuperSU.
Any improvements?
Any improvements ? bros .... plz tell me
Just updated it ..... it's seemed nice ... battery's much improved IMO .....
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
desmoloch said:
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
Click to expand...
Click to collapse
No problem with my Sony Smartwatch 2. Not with this update, not before. Did you check Smart connect NOT to close when screen is closed? You have to give it access even when sceen is closed.
Search in settings -> protected apps.
Manual update doesn't delete anything. My fault. @andrewin was right.
SawMin said:
Any improvements ? bros .... plz tell me
Click to expand...
Click to collapse
Compared to B120, Traffic management was added to Wireless tab and Touch ID sensitivity improved. It was also in B121 already.
However B121 had worse battery performance vs B120, which was fixed in B127.
In summary, B127 has the same battery as it was in B120 plus the same smoothness as in B121. Good job, Huawei. Hope to get 5.0 soon.
Fooox1 said:
If you flashst on Power Vol, no. Can you make custom recovery on it. For root you can then use the recovery_h60.img. Still works. Then have to do is flash SuperSU.
Click to expand...
Click to collapse
So do I have to get back to stock recovery to update to 127 or can I do the update having a custom recovery?
tried, new theme selection added
freco said:
No problem with my Sony Smartwatch 2. Not with this update, not before. Did you check Smart connect NOT to close when screen is closed? You have to give it access even when sceen is closed.
Search in settings -> protected apps.
Manual update doesn't delete anything. My fault. @andrewin was right.
Click to expand...
Click to collapse
Smartconnect and smartbandy are protected. I did not change it after the update.
Its very strange since the update: today morning my smartband connect and diconnected and disconnect and so on... Rebooted my mate an now its fine. Same happened yesterday!
One thing is "New" since 127: Bluetooth connects to my car radio even there is already a connection Form another phone!! -> my girlfriend played music with her ihpone and if i activate BT my phone disconnects the iPhone. Thats definitly New. Before the first phone connected stays connected
desmoloch said:
...Before the first phone connected stays connected
Click to expand...
Click to collapse
Looks like after update, Mate is more agressive.
iPhone confirm its alias, iFail again.
lrcquest said:
So do I have to get back to stock recovery to update to 127 or can I do the update having a custom recovery?
Click to expand...
Click to collapse
Yes, you can if you flashst about Volume + Power (forced-mode). If you want to flash via the internal function, then you need stock recovery.
desmoloch said:
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
Click to expand...
Click to collapse
Me working BT fine. Without any problem. Car Nokia CKW BT.
R2D20208 said:
Me working BT fine. Without any problem. Car Nokia CKW BT.
Click to expand...
Click to collapse
OK Bluetooth only buggy for me i had that "Connect and reconnect" yesterday and today. Always fixed after reboot. When it happens again i have to find a solution.
And yes i'm happy that my mate is now more aggressive then iPhone
//edit: Bluetooth again conecting and reconnecting
//edit2: how can i go back to sp04?
desmoloch said:
OK Bluetooth only buggy for me i had that "Connect and reconnect" yesterday and today. Always fixed after reboot. When it happens again i have to find a solution.
And yes i'm happy that my mate is now more aggressive then iPhone
//edit: Bluetooth again conecting and reconnecting
//edit2: how can i go back to sp04?
Click to expand...
Click to collapse
Use Stock Recovery, and dload folder 04. ( wipe recommented )
Hi there,
I wish to format an usb dongle to be read (r/w) by my Note 3 (KK) and OS X 10.
I've tried both exFat and NTFS but it seems that my phone don't mount it.
Any help?
XargonWan said:
Hi there,
I wish to format an usb dongle to be read (r/w) by my Note 3 (KK) and OS X 10.
I've tried both exFat and NTFS but it seems that my phone don't mount it.
Any help?
Click to expand...
Click to collapse
Try other formats
kenny1991 said:
Try other formats
Click to expand...
Click to collapse
For example?
Fat32 has low size file limits...
XargonWan said:
For example?
Fat32 has low size file limits...
Click to expand...
Click to collapse
Ext3 or 4.
I've tried a lot of FileSystems so far and it comes up that my phone can't read my dongle.
My Windows computer can, so the dongle is not corrupted/damaged.
Here's the story:
- 6 months ago I had this actual KK rom and worked
- Switched to LP and worked
- Switched back to the first KK rom and it's not working...
Dunno what to do...
XargonWan said:
I've tried a lot of FileSystems so far and it comes up that my phone can't read my dongle.
My Windows computer can, so the dongle is not corrupted/damaged.
Here's the story:
- 6 months ago I had this actual KK rom and worked
- Switched to LP and worked
- Switched back to the first KK rom and it's not working...
Dunno what to do...
Click to expand...
Click to collapse
The obvious of course? Switch back to lollipop.
kenny1991 said:
The obvious of course? Switch back to lollipop.
Click to expand...
Click to collapse
No, Lollipop for my phone is extremelsy slow compared to KK, plus BT and WiFi aren't working properly, they keeping disconnecting or BT can't find the devices; they're conflicting.
So the best choice for me is in fact KK but now the dongle is working no more and I don't know why, it was working on this same exact ROM before I switched to Lollipop.
flash back original sammy rom (unrooted), check if working. If working, root and flash your KK rom of choice. More than likely some driver has gone missing or script in the way from flashing LP down to KK.
Good luck!
Hi i bought my phone like almost a year when i bought it i really didnt check it and maybe a weak after i saw that the computer didnt recognize my phone i dl kies new and old version but didnt work the same with drivers etc.. the computer just says "USB device not recognized" i try to find the solution but its like the charge port it's damaged i can charge it but i can transfer files or whatever via usb my point is if there is any way i can upgrade my phone software to 6.0.1 via SD card and how can i do that? im some kind of new with this things but i know a little and if u give me the instructions will be wonderful
my phone it's a verizone phone(so bad in my opinion)
SAMSUNG SM-G900V
G900VVRU2BOG5
thanks for reading!
Katriel7 said:
Hi i bought my phone like almost a year when i bought it i really didnt check it and maybe a weak after i saw that the computer didnt recognize my phone i dl kies new and old version but didnt work the same with drivers etc.. the computer just says "USB device not recognized" i try to find the solution but its like the charge port it's damaged i can charge it but i can transfer files or whatever via usb my point is if there is any way i can upgrade my phone software to 6.0.1 via SD card and how can i do that? im some kind of new with this things but i know a little and if u give me the instructions will be wonderful
my phone it's a verizone phone(so bad in my opinion)
SAMSUNG SM-G900V
G900VVRU2BOG5
thanks for reading!
Click to expand...
Click to collapse
Settings>Software Update
Lightn1ng said:
Settings>Software Update
Click to expand...
Click to collapse
lol if u see this post, didnt u think about i tryed? it just says "service unavialable" software update is temporarily unavialable. Try again later