Database Users

Well crap...I think I bricked it :-(

I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?

Silly question, I know. But did you have a nandroid backup, by any chance?

This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App

If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.

You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth

Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!

hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.

Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)

Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?

hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!

Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works

And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.

mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).

That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.

i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him

Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...

mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot

I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.

PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.

Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.

PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?

Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.

PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.

Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.

PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match

Goomanager stuck

Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?

i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers

Dude, you pretty much hosed your new phone by not doing your home work before messing with it. I'm sure you're on mf3 firmware. Your best hope is to get it re-flashed at a bestbuy with the Samsung experience. You'll have some explaining to do! Good luck!

xBeerdroiDx said:
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Click to expand...
Click to collapse
att Build number is I337ucuamf3

Wayneman101 said:
att Build number is I337ucuamf3
Click to expand...
Click to collapse
You can probably get it to boot by pushing vol down when it goes to download mode. But your recovery is messed up now.

To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM

ryno9100 said:
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
Click to expand...
Click to collapse
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.

Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.

jd1639 said:
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Click to expand...
Click to collapse
If I can find an old one can I use it and then update?

Wayneman101 said:
If I can find an old one can I use it and then update?
Click to expand...
Click to collapse
No, it has to be mf3 firmware and it's not currently available. Trying to flash an earlier firmware won't work. There is a qfuse in the phone's circuitry that is blown when mf3 is on the phone which won't let you downgrade.
Edit, I feel sorry for you man, messing up your phone in the first hour. You're not the only one. Here is what others have done. Read it all it might help. http://forum.xda-developers.com/showthread.php?p=45359306

Wayneman101 said:
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
Click to expand...
Click to collapse
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it

ryno9100 said:
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
Click to expand...
Click to collapse
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.

jd1639 said:
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
Click to expand...
Click to collapse
Do they charge anything to re-flash it?

ryno9100 said:
Do they charge anything to re-flash it?
Click to expand...
Click to collapse
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.

jd1639 said:
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
Click to expand...
Click to collapse
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*

ryno9100 said:
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
Click to expand...
Click to collapse
Make sure they have a Samsung experience kiosk. Not all bestbuys have them

I took it to best buy with a samsung experience. Them and geek squad couldn't or wouldn't help me. They said to go online to unroot it and fix it.

Anybody know what trying to update to 4.3 will do?

Wayneman101 said:
Anybody know what trying to update to 4.3 will do?
Click to expand...
Click to collapse
if your recovery is still broken, nothing. you can use the Odin filed for MF3 or find the thread about someone who use a recovery flasher app to repair before doing the update.

Wayneman101 said:
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
Click to expand...
Click to collapse
Hey... I jacked up my phone installing a custom recovery with GooManager too. It isn't for our phone. To get back to Android from DL mode just do power button+vol up+home and it will send ya back. Take it to Best Buy and say Kies broke your phone. You were trying to run an update and it messed it up. They can fix it for ya. Obviously you're rooted so just delete Superuser.apk and delete all root apps. Just in case. And don't be a derp and tell them the phone was rooted... Good Luck.
(Go back and hopefully they won't remember you.)
Sent from my SAMSUNG-SGH-I337

[Q] Emergency, ROM failed to load, nearly bricked?

I tried putting in a rom earlier for my note 3 and it didn't take.
I ended up on that, vibration boot loop.
Odin still worked fine so I tried putting in an original stock rom with root, so I can add recovery.
I could not actually find a fully suitable rom choice, and the samsung website didn't play well with me either. firstly it would not let me register for some reason...anyway.
I am UK on O2 running 9005 SO I put in N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE
I don't know if that was the right choice, I set it up on PDA, and unclicked partition
It's been stuck possibly hanging on ext4 sys for over an hour.
The references I have seen suggest it takes a long time but how long is too long?
I don't want to pull the plug to brick the device completely.
I have a cwm recovery so all I need is to put the recovery back in and I should be good to go...
If this is hanging, what other options do I have?
How long is too long?
Any help fixing this would be greatly appreciated, and a drinks on me...
I am kinda freaking out, have seen similar threads, but because the firmwares are so different they didn't really help..or perhaps I misread things...but nothing really covered not being able to load the recovery software itself
consider me lizard brain in freak out mode right now..
please reply promptly with something.

Can you still boot to cwm or download mode only?

hey_joe said:
Can you still boot to cwm or download mode only?
Click to expand...
Click to collapse
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.

8thsiner said:
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
Click to expand...
Click to collapse
Over one hour is too long to flash something even a full stock rom. Something is wrong there.
So you're saying you have no access to an original stock rom of your phone? If there is a problem like this flashing, I would flash the stock rom first then just root and install cwm. The first thing you want to do is have a working phone then just do the other stuff after like rooting, etc..
If what you posted is your stock rom, then download here and flash through odin.
There's also a newer one which is MK2 which you can download here.
Either one is stock.

Downloading the mk 2 now to test

That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me

8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
No problem. Don't have paypal though and it's not necessary.
Enjoy your phone.

8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
Mate the reason you got into trouble was you weren't flashing a stock rom...
N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE means it has been altered and is considered custom...
A stock rom has not been altered.

8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
There are a lot of good people here that will help you. You don't need to give anything back. And be sure to ALWAYS have a NANDROID backup so that you can restore your phone if anything bad happens.

desperate help finding the right stock rom please.

My phone just suddenly stopped working earlier today.it was running the latest omega rom with the latest modem and boot loader. ...
I cant get into recovery either. When I try it just reboots and goes to the samsung boot screen.my phone is a sim free insurance replacement and im not sure what stock rom to flash...
Could some nice soul just tell me the exact rom thats needed.
Its a uk based I9505 .
Please some one help as im away from home atm and have no way of contacting anyone.i have laptop and a dongle so can at least download and flash.
What ever has happened has corrupted it somehow.
I can still get into download mode how ever.
Id be eternally grateful if there is some nice soul to.help me

Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.

iJo09 said:
Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.
Click to expand...
Click to collapse
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi

i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers

Gavin01 said:
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi
Click to expand...
Click to collapse
No problem man
Gavin01 said:
i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers
Click to expand...
Click to collapse
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device

iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery

Gavin01 said:
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery
Click to expand...
Click to collapse
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477

MAX 404 said:
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
mate your being brilliant! downloaded the firmware which took hours lol over a mobile connection.
phone just restarts and the sits at the samsung screen with the blue light flashing...
cant get into recovery either........
how do i go about using this pit file ive never done it?
thanks again
sorry i cant see a pit file there to download?
edit found it!

iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
unfortunately it still just sits at the sumsung screen with blue light flashing.....
ive left it for over 10 minutes and nothing and i still cant get into recovery....
it was working fine and all i did was download a couple of apps and then it went nuts and then wouldnt boot.
do you have any more ideas my friend?
im so desperate for this to work. im on vacation and have no phone to use for taking photos or facebook

managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol

Gavin01 said:
managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol
Click to expand...
Click to collapse
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809

MAX 404 said:
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809
Click to expand...
Click to collapse
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root

Gavin01 said:
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root
Click to expand...
Click to collapse
I get it mate.

might just root it and go for a new launcher

right im getting this issue again so i think i need to flash everything back to stock again and go from there.
How do i know which is the exact correct latest rom from my internation i9505....thanks people.
phone is almost getting so hot its dangerous!
If anyone can point me in the right direction id be eternally grateful.
Or even a older one than i could then OTA update?