Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Dude, you pretty much hosed your new phone by not doing your home work before messing with it. I'm sure you're on mf3 firmware. Your best hope is to get it re-flashed at a bestbuy with the Samsung experience. You'll have some explaining to do! Good luck!
xBeerdroiDx said:
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Click to expand...
Click to collapse
att Build number is I337ucuamf3
Wayneman101 said:
att Build number is I337ucuamf3
Click to expand...
Click to collapse
You can probably get it to boot by pushing vol down when it goes to download mode. But your recovery is messed up now.
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
ryno9100 said:
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
Click to expand...
Click to collapse
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
jd1639 said:
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Click to expand...
Click to collapse
If I can find an old one can I use it and then update?
Wayneman101 said:
If I can find an old one can I use it and then update?
Click to expand...
Click to collapse
No, it has to be mf3 firmware and it's not currently available. Trying to flash an earlier firmware won't work. There is a qfuse in the phone's circuitry that is blown when mf3 is on the phone which won't let you downgrade.
Edit, I feel sorry for you man, messing up your phone in the first hour. You're not the only one. Here is what others have done. Read it all it might help. http://forum.xda-developers.com/showthread.php?p=45359306
Wayneman101 said:
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
Click to expand...
Click to collapse
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
ryno9100 said:
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
Click to expand...
Click to collapse
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
jd1639 said:
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
Click to expand...
Click to collapse
Do they charge anything to re-flash it?
ryno9100 said:
Do they charge anything to re-flash it?
Click to expand...
Click to collapse
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
jd1639 said:
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
Click to expand...
Click to collapse
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
ryno9100 said:
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
Click to expand...
Click to collapse
Make sure they have a Samsung experience kiosk. Not all bestbuys have them
I took it to best buy with a samsung experience. Them and geek squad couldn't or wouldn't help me. They said to go online to unroot it and fix it.
Anybody know what trying to update to 4.3 will do?
Wayneman101 said:
Anybody know what trying to update to 4.3 will do?
Click to expand...
Click to collapse
if your recovery is still broken, nothing. you can use the Odin filed for MF3 or find the thread about someone who use a recovery flasher app to repair before doing the update.
Wayneman101 said:
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
Click to expand...
Click to collapse
Hey... I jacked up my phone installing a custom recovery with GooManager too. It isn't for our phone. To get back to Android from DL mode just do power button+vol up+home and it will send ya back. Take it to Best Buy and say Kies broke your phone. You were trying to run an update and it messed it up. They can fix it for ya. Obviously you're rooted so just delete Superuser.apk and delete all root apps. Just in case. And don't be a derp and tell them the phone was rooted... Good Luck.
(Go back and hopefully they won't remember you.)
Sent from my SAMSUNG-SGH-I337
Related
So I had flashed my n8013 to the Germany n8010 4.1.1 firmware using this:
http://forum.xda-developers.com/showthread.php?t=2048213
Then today I tried to restore back to UEALH2 n8013 stock:
http://forum.xda-developers.com/showthread.php?t=2100971
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Here is what you do
Go into recovery do a complete wipe
Download the rom from here http://www.hotfile.com/dl/178484761/092fdea/N8013UEALI3_N8013XARALI3_XAR.zip.html
and Flash it with Odin, should work fine
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Click to expand...
Click to collapse
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Can't reach stock recovery
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
vypor87 said:
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
Click to expand...
Click to collapse
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
BarryH_GEG said:
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Click to expand...
Click to collapse
The first link was trying to use the US ICS Rom via Odin. My note won't get in a functional state either way
BarryH_GEG said:
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
Click to expand...
Click to collapse
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
edit: sorry Barry I'm getting you confused with HG! in the other forum page.
vypor87 said:
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
Click to expand...
Click to collapse
That's swell. Can you get in to download mode?
BarryH_GEG said:
That's swell. Can you get in to download mode?
Click to expand...
Click to collapse
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
Here is the official md5 file for the XAR N8013 Note 10.1: http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=XAR&os=1&type=3#firmware
Hope this helps.
BarryH_GEG said:
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
Click to expand...
Click to collapse
K, downloading right now. I actually spent the $9 to get a month subscription to hotfile to download faster. Not helping much as it's not my best bandwidth but i hope it works!!
Holy s*** it's aaaaa-live!!! It's alive it's alive!!! DEF-CON lowered now. I had another UEALH2 rooted tar on my machine and I cannot remember which forum page I downloaded it from sadly. I had downloaded it back in August on the 24th. It's dated the 22nd of August. The other tar I downloaded was dated the 22nd also but it was different somehow. The name scheme on this one is UEALH2_rooted_system.tar and it worked. Unlike UEALH2_prerooted.tar. That one almost screwed me up! I need to find where this original file came from. Either way I'm back on ICS and plugged into a wall. It's taking me through all the initial setup crap right now so it's hard to tell how low I got it but I started this night flashing with about 56% battery. And when you start with half a battery you start regretting things shortly after when you botch something up big time!
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Spoke too soon. This is the one where the touchscreen stops working. FML... Still downloading the HotFile link of the image Barry sent.
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue.
Click to expand...
Click to collapse
vypor87 said:
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Click to expand...
Click to collapse
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
RandomAwesomeGuy said:
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Well heres the worry about the charging I had. Motorola phones are not very forgiving to charge unless youre booted or on the battery charge screen. Thats why I was freaking out. I kies updated from that same botched image and it seemed to resolve my touchscreen issue. Time will tell. Only problem is now I forgot to protect root before the update so superuser doesnt know where to find the binaries. Does the CF Autoroot still work with 4.1.2? If so ill just use that.
Either way, enough problems cleared for one night. Im going to bed. Gotta wake up for work in the morning.
Sent from my GT-N8013 using xda premium
RandomAwesomeGuy said:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Hopefully nothing. Mine's just the direct link to the Samsung-Updates upload. Where files exist in both places I post Samsung-Updates version because you don't need to register.
BTW thank you guys. It's always good to know that the community is looking out for each other. I think once I'm "100%" stock TriAway and all I ain't flashing to a different stock base again. Lol. Although I do like the stock German folders vs the crappy US ones that are literal folders that are ugly. Guess I need to find a new launcher. And Barry thanks for helping me enjoy 4.1.1 in the meantime!
Sent from my DROID RAZR using xda premium
Hey guys,
Just had the fantastic AMOLED breaking symptom of the Galaxy S4. I need to restore to factory TouchWiz so I can go in and get a replacement phone (I had rooted and flashed stock Android and am afraid they'll figure this out and refuse to give me a new phone despite the physical damage) so I desperately need screenshots/photos of the CWM Touch 6.0.3.2 options to restore a backup (the only one I have on the phone).
If there's any other way to do this please let me know.
Beyond that, since the screen appears to be getting progressively worse to the point where I just can't install anything, is there any way I can remove any evidence of root/flashing from the file system just in case?
Please help!
Thank you!
cleanup said:
Hey guys,
Just had the fantastic AMOLED breaking symptom of the Galaxy S4. I need to restore to factory TouchWiz so I can go in and get a replacement phone (I had rooted and flashed stock Android and am afraid they'll figure this out and refuse to give me a new phone despite the physical damage) so I desperately need screenshots/photos of the CWM Touch 6.0.3.2 options to restore a backup (the only one I have on the phone).
If there's any other way to do this please let me know.
Beyond that, since the screen appears to be getting progressively worse to the point where I just can't install anything, is there any way I can remove any evidence of root/flashing from the file system just in case?
Please help!
Thank you!
Click to expand...
Click to collapse
Gentle bump! I just need to know which menu items to pick as I won't really be able to see what I'm doing lol
cleanup said:
Gentle bump! I just need to know which menu items to pick as I won't really be able to see what I'm doing lol
Click to expand...
Click to collapse
flash stock firmware with odin. easier to get into download mode :good:
samersh72 said:
flash stock firmware with odin. easier to get into download mode :good:
Click to expand...
Click to collapse
Honestly I'm even having trouble booting into recovery mode because I can't tell when the prompts are to let go of the power button, etc. Can't see a thing.
Any advice?
The wireless company has already agreed to ship me a new device and a return label with which I can return the old one (so I'll get my new phone before having to return the old one) but I still want to do this out of safety and respect.
Hate to be the one to tell u but as far as i know (anyone correct me if im wrong) everytime u flash a rom (dont know if rooting counts) its recorded on ur phone.u can undo this with triangle away, wich can be found at the same site where autoroot is.
Sent from my GT-I9505 using XDA Premium HD app
cleanup said:
Honestly I'm even having trouble booting into recovery mode because I can't tell when the prompts are to let go of the power button, etc. Can't see a thing.
Any advice?
The wireless company has already agreed to ship me a new device and a return label with which I can return the old one (so I'll get my new phone before having to return the old one) but I still want to do this out of safety and respect.
Click to expand...
Click to collapse
just hold volume down first followed by home followed by power, wait for 7 seconds, release buttons, press volume up one time and you are in download mode, connect to odin and flash stock firmware. thats it.
no way for triangle away without screen
samersh72 said:
flash stock firmware with odin. easier to get into download mode :good:
Click to expand...
Click to collapse
richard2311 said:
Hate to be the one to tell u but as far as i know (anyone correct me if im wrong) everytime u flash a rom (dont know if rooting counts) its recorded on ur phone.u can undo this with triangle away, wich can be found at the same site where autoroot is.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Well, they're sending me the new one before taking the old one back, so I think it'll be okay. Plus they're mostly concerned with the broken screen; it's not a bricked device.
samersh72 said:
just hold volume down first followed by home followed by power, wait for 7 seconds, release buttons, press volume up one time and you are in download mode, connect to odin and flash stock firmware. thats it.
no way for triangle away without screen
Click to expand...
Click to collapse
Okay, the phone showed up in ODIN. Downloading a stock firmware package for my carrier right now but I'm honestly not sure how to use Odin to flash it? Is there a tutorial anywhere? Thanks for the help!
cleanup said:
Well, they're sending me the new one before taking the old one back, so I think it'll be okay. Plus they're mostly concerned with the broken screen; it's not a bricked device.
Okay, the phone showed up in ODIN. Downloading a stock firmware package for my carrier right now but I'm honestly not sure how to use Odin to flash it? Is there a tutorial anywhere? Thanks for the help!
Click to expand...
Click to collapse
see my signature for tutorial
I need help!!!
I try everything to root my S4, any different way and i can't root, i fell its something wrong with it, cause phone is 16gb shows only 9gb 6 gb its for miscellaneous files. can someone help?
I like to re install everything.
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
jd1639 said:
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
Click to expand...
Click to collapse
Baseband version I337UCUAMF3
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
MF3 = motochopper does not work. You would need to root using this method:
http://forum.xda-developers.com/showthread.php?t=2387577
NOTE: You cannot unroot once you do it. If you mess up your phone with root, there is likely no way to fix it. There is no possibility of installing a custom recovery, even after you have root...and so you can't flash any ROMs either. Know the risks and issues before you proceed and make sure root is THAT important to you.
Since you are on MF3 there is also no way to downgrade to previous firmware, you are stuck with the above restrictions until someone figures out a new exploit...and no ETA on that.
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
i gonna try, and i will let you guys know about. thanks...
jd1639 said:
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
Click to expand...
Click to collapse
I get stock on download mode. Any solution for it?
moiconlau said:
I get stock on download mode. Any solution for it?
Click to expand...
Click to collapse
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
jd1639 said:
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
Click to expand...
Click to collapse
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
moiconlau said:
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
Click to expand...
Click to collapse
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
moiconlau said:
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
How did you get it to work?
jd1639 said:
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Click to expand...
Click to collapse
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
moiconlau said:
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
Click to expand...
Click to collapse
Great to hear!
jd1639 said:
Great to hear!
Click to expand...
Click to collapse
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
fukenbiker said:
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
Click to expand...
Click to collapse
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
moiconlau said:
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
Click to expand...
Click to collapse
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
jd1639 said:
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
Click to expand...
Click to collapse
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
fukenbiker said:
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
Click to expand...
Click to collapse
is nothing also than i can do?
moiconlau said:
is nothing also than i can do?
Click to expand...
Click to collapse
Sadly no since u have MF3 only option is root only.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
I tried putting in a rom earlier for my note 3 and it didn't take.
I ended up on that, vibration boot loop.
Odin still worked fine so I tried putting in an original stock rom with root, so I can add recovery.
I could not actually find a fully suitable rom choice, and the samsung website didn't play well with me either. firstly it would not let me register for some reason...anyway.
I am UK on O2 running 9005 SO I put in N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE
I don't know if that was the right choice, I set it up on PDA, and unclicked partition
It's been stuck possibly hanging on ext4 sys for over an hour.
The references I have seen suggest it takes a long time but how long is too long?
I don't want to pull the plug to brick the device completely.
I have a cwm recovery so all I need is to put the recovery back in and I should be good to go...
If this is hanging, what other options do I have?
How long is too long?
Any help fixing this would be greatly appreciated, and a drinks on me...
I am kinda freaking out, have seen similar threads, but because the firmwares are so different they didn't really help..or perhaps I misread things...but nothing really covered not being able to load the recovery software itself
consider me lizard brain in freak out mode right now..
please reply promptly with something.
Can you still boot to cwm or download mode only?
hey_joe said:
Can you still boot to cwm or download mode only?
Click to expand...
Click to collapse
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
8thsiner said:
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
Click to expand...
Click to collapse
Over one hour is too long to flash something even a full stock rom. Something is wrong there.
So you're saying you have no access to an original stock rom of your phone? If there is a problem like this flashing, I would flash the stock rom first then just root and install cwm. The first thing you want to do is have a working phone then just do the other stuff after like rooting, etc..
If what you posted is your stock rom, then download here and flash through odin.
There's also a newer one which is MK2 which you can download here.
Either one is stock.
Downloading the mk 2 now to test
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
No problem. Don't have paypal though and it's not necessary.
Enjoy your phone.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
Mate the reason you got into trouble was you weren't flashing a stock rom...
N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE means it has been altered and is considered custom...
A stock rom has not been altered.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
There are a lot of good people here that will help you. You don't need to give anything back. And be sure to ALWAYS have a NANDROID backup so that you can restore your phone if anything bad happens.
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Okay so here is what fixed it for anyone else like me that is a noob, and does dumb stuff to their phone. You cant roll back to old firmwares. You have to flash to the latest firmware that was on the phone or newer. I found the updated firmware and its good to go.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
Many thanks to koop1955 for his help, and thanks to everyone that jumped in to help a poor noob.
Demijinx said:
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Click to expand...
Click to collapse
Anybody? Literally ANY idea is worth a shot at this point.
Did you use Odin to root the device? What options did you set?
Zoolok said:
Did you use Odin to root the device? What options did you set?
Click to expand...
Click to collapse
Thanks for the reply Zooklok, I did use Odin, and I didnt change any settings.
So checked boxes under options are;
Auto Reboot
F. Reset Time
Thats all. I clicked "AP" to load the firmware, then clicked start.
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
selferng said:
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
Click to expand...
Click to collapse
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Demijinx said:
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Click to expand...
Click to collapse
Can u use the hardware button to select? Volume up and down and power button to select
selferng said:
Can u use the hardware button to select? Volume up and down and power button to select
Click to expand...
Click to collapse
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Demijinx said:
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Click to expand...
Click to collapse
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
nms247 said:
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Click to expand...
Click to collapse
Its the regular S6, not the edge. So the firmware is correct?
a. felon said:
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
Click to expand...
Click to collapse
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
B3311 said:
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
Click to expand...
Click to collapse
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
UPDATE! FIXED IT!
I tried a different root method
http://trueandroid.com/g920pvpu2bof...mware-sprint-galaxy-s6-sm-g920p-how-to-guide/
This worked the first time, and restored the touchscreen functions. Thank you everyone for your help.
Demijinx said:
Its the regular S6, not the edge. So the firmware is correct?
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
Click to expand...
Click to collapse
Had to ask this being the edge+ forum
Sent from my SM-G928F using Tapatalk
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Demijinx said:
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Click to expand...
Click to collapse
Ok I know one thing for sure, you are not the first to face this but it seems to be solved by flashing the tar file for your device. More info here http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Good luck
Don't forget to Press that thanks button ?.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Demijinx said:
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Click to expand...
Click to collapse
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
koop1955 said:
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
Click to expand...
Click to collapse
Will do brother. Thank you so much, you really pulled me out of a spot. Im used to paying for everything in "Military Currency". Thank you again.