Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Okay so here is what fixed it for anyone else like me that is a noob, and does dumb stuff to their phone. You cant roll back to old firmwares. You have to flash to the latest firmware that was on the phone or newer. I found the updated firmware and its good to go.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
Many thanks to koop1955 for his help, and thanks to everyone that jumped in to help a poor noob.
Demijinx said:
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Click to expand...
Click to collapse
Anybody? Literally ANY idea is worth a shot at this point.
Did you use Odin to root the device? What options did you set?
Zoolok said:
Did you use Odin to root the device? What options did you set?
Click to expand...
Click to collapse
Thanks for the reply Zooklok, I did use Odin, and I didnt change any settings.
So checked boxes under options are;
Auto Reboot
F. Reset Time
Thats all. I clicked "AP" to load the firmware, then clicked start.
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
selferng said:
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
Click to expand...
Click to collapse
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Demijinx said:
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Click to expand...
Click to collapse
Can u use the hardware button to select? Volume up and down and power button to select
selferng said:
Can u use the hardware button to select? Volume up and down and power button to select
Click to expand...
Click to collapse
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Demijinx said:
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Click to expand...
Click to collapse
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
nms247 said:
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Click to expand...
Click to collapse
Its the regular S6, not the edge. So the firmware is correct?
a. felon said:
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
Click to expand...
Click to collapse
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
B3311 said:
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
Click to expand...
Click to collapse
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
UPDATE! FIXED IT!
I tried a different root method
http://trueandroid.com/g920pvpu2bof...mware-sprint-galaxy-s6-sm-g920p-how-to-guide/
This worked the first time, and restored the touchscreen functions. Thank you everyone for your help.
Demijinx said:
Its the regular S6, not the edge. So the firmware is correct?
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
Click to expand...
Click to collapse
Had to ask this being the edge+ forum
Sent from my SM-G928F using Tapatalk
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Demijinx said:
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Click to expand...
Click to collapse
Ok I know one thing for sure, you are not the first to face this but it seems to be solved by flashing the tar file for your device. More info here http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Good luck
Don't forget to Press that thanks button ?.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Demijinx said:
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Click to expand...
Click to collapse
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
koop1955 said:
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
Click to expand...
Click to collapse
Will do brother. Thank you so much, you really pulled me out of a spot. Im used to paying for everything in "Military Currency". Thank you again.
Related
Hey guys
So I just received my BRAND NEW S4 (i9505), and decided to root/flash it almost out of the box. (Smart, huh?)
I did exactly what CURSED4EVA mention in the 2 videos on youtube about rooting and flashing. The only difference is, when I need to hit REEBOT NOW (after doing the zip, wipes etc), it asks me: "ROM may flash stock recovery on boot. Fix?"
(It doesn't ask HIM that in that video) - Can't link to him, but search: "cursed4eva Galaxy S4 google edition" - and it is the first video about flashing
I tried clicking yes, tried no, tried "avoiding it", tried restore backup and tried all that in both CWM and TWRP.
All in all I end up with the Google colors just looping and looping. Even tried flashing StockDroids Rom, just to see if it was helping.. but no, same problem.
So now I have a brand new phone, DEAD :good:
Any suggestions on what I am doing wrong? It is a i9505 from Denmark.
And and, sorry if this has already been answered. Just coudnt find it anywhere..
Thanks a bunch!
saktown said:
Any suggestions on what I am doing wrong? It is a i9505 from Denmark.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem! I eventually got it sorted, turned out I forgot to turn on USB Debugging mode before installing CF-Auto-Root. I got stuck at the Nexus loading screen.
I am pretty new to this but thought I would save you the headache, - head over to samersh72's post on unbricking [here], follow the instructions, and you should be just fine, though you'll lose your root and be back at your original stock firmware!
If you need any more help feel free to reply
supjackary said:
I did the exact same thing and had the same problem! I eventually got it sorted, turned out I forgot to turn on USB Debugging mode before installing CF-Auto-Root. I got stuck at the Nexus loading screen.
I am pretty new to this but thought I would save you the headache, - head over to samersh72's post on unbricking [here], follow the instructions, and you should be just fine, though you'll lose your root and be back at your original stock firmware!
If you need any more help feel free to reply
Click to expand...
Click to collapse
Dude, thanks man. Will have a look tonight. So basically follow the guide to get back to stock. And after, Awhen Cf auto rooting this time remember to turn on USB debugging mode, right?
Thanks again
well, went back to stock firmware with a perfectly fine phone.
remembered this time enable the usb debugging mode, but problem is still the same. Still stuck at the nexus boot colors.
When I hit reboot now in cwm, it first asks me:
"rom may flash stock recovery on boot. fix"
Then:
"root access possibly lost"
saktown said:
well, went back to stock firmware with a perfectly fine phone.
remembered this time enable the usb debugging mode, but problem is still the same. Still stuck at the nexus boot colors.
When I hit reboot now in cwm, it first asks me:
"rom may flash stock recovery on boot. fix"
Then:
"root access possibly lost"
Click to expand...
Click to collapse
ignore that and just boot, will be fine.
Hazerd said:
ignore that and just boot, will be fine.
Click to expand...
Click to collapse
Does not work tried hoosing "no" to both questions
Even if I choose "go back" it's just going to ask next question.
So do I choose "no" to both AFTER a fresh stock firmware install? Maybe try that?
saktown said:
Does not work tried hoosing "no" to both questions
Even if I choose "go back" it's just going to ask next question.
So do I choose "no" to both AFTER a fresh stock firmware install? Maybe try that?
Click to expand...
Click to collapse
if nothing worked, you prob have a different s4 variant. go back to stock couse it will prob not work.
Hazerd said:
if nothing worked, you prob have a different s4 variant. go back to stock couse it will prob not work.
Click to expand...
Click to collapse
Found this:
/showthread.php?t=2341026
Will see if I can pull it off tonight.
I need help!!!
I try everything to root my S4, any different way and i can't root, i fell its something wrong with it, cause phone is 16gb shows only 9gb 6 gb its for miscellaneous files. can someone help?
I like to re install everything.
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
jd1639 said:
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
Click to expand...
Click to collapse
Baseband version I337UCUAMF3
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
MF3 = motochopper does not work. You would need to root using this method:
http://forum.xda-developers.com/showthread.php?t=2387577
NOTE: You cannot unroot once you do it. If you mess up your phone with root, there is likely no way to fix it. There is no possibility of installing a custom recovery, even after you have root...and so you can't flash any ROMs either. Know the risks and issues before you proceed and make sure root is THAT important to you.
Since you are on MF3 there is also no way to downgrade to previous firmware, you are stuck with the above restrictions until someone figures out a new exploit...and no ETA on that.
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
i gonna try, and i will let you guys know about. thanks...
jd1639 said:
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
Click to expand...
Click to collapse
I get stock on download mode. Any solution for it?
moiconlau said:
I get stock on download mode. Any solution for it?
Click to expand...
Click to collapse
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
jd1639 said:
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
Click to expand...
Click to collapse
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
moiconlau said:
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
Click to expand...
Click to collapse
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
moiconlau said:
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
How did you get it to work?
jd1639 said:
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Click to expand...
Click to collapse
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
moiconlau said:
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
Click to expand...
Click to collapse
Great to hear!
jd1639 said:
Great to hear!
Click to expand...
Click to collapse
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
fukenbiker said:
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
Click to expand...
Click to collapse
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
moiconlau said:
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
Click to expand...
Click to collapse
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
jd1639 said:
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
Click to expand...
Click to collapse
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
fukenbiker said:
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
Click to expand...
Click to collapse
is nothing also than i can do?
moiconlau said:
is nothing also than i can do?
Click to expand...
Click to collapse
Sadly no since u have MF3 only option is root only.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Dude, you pretty much hosed your new phone by not doing your home work before messing with it. I'm sure you're on mf3 firmware. Your best hope is to get it re-flashed at a bestbuy with the Samsung experience. You'll have some explaining to do! Good luck!
xBeerdroiDx said:
i have no idea what carrier or device (i337 / i337m) you have.
when you got your device did you check in settings to see what build number you were running and then check out the material on xda before proceeding? there's ways of doing things that can save you headaches if you browse and read first. cheers
Click to expand...
Click to collapse
att Build number is I337ucuamf3
Wayneman101 said:
att Build number is I337ucuamf3
Click to expand...
Click to collapse
You can probably get it to boot by pushing vol down when it goes to download mode. But your recovery is messed up now.
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
ryno9100 said:
To the OP
I have the same issue. I manage to reboot the phone by turning it off, holding the power and volume down buttons, then when it asks if I'm sure I want to install a custom ROM, I hot cancel (volume down) and it reboots like normal.
Right now, I'm just trying to get mine back into ecovery so I can install CM
Click to expand...
Click to collapse
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
jd1639 said:
You're not going to be able to get it into recovery. Bestbuy is your best solution. Or wait until if and when an odin flashable firmware is available.
Click to expand...
Click to collapse
If I can find an old one can I use it and then update?
Wayneman101 said:
If I can find an old one can I use it and then update?
Click to expand...
Click to collapse
No, it has to be mf3 firmware and it's not currently available. Trying to flash an earlier firmware won't work. There is a qfuse in the phone's circuitry that is blown when mf3 is on the phone which won't let you downgrade.
Edit, I feel sorry for you man, messing up your phone in the first hour. You're not the only one. Here is what others have done. Read it all it might help. http://forum.xda-developers.com/showthread.php?p=45359306
Wayneman101 said:
Im getting out of it that way too. But if I ever want to update or anything this will stop me i think. I can use it for now but I really want to fix it. nothing worse than having a phone for an hour and ****ing it up.
Click to expand...
Click to collapse
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
ryno9100 said:
Yea. I'm with you 100%. I'm searching for a solution myself. I had CWM running fine at first, and wanted to swap to TWRP for an easier interface, and didn't do enough research. If I find anything, I'll be back on your post to tell you how I fixed it
Click to expand...
Click to collapse
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
jd1639 said:
Sorry to say, but you'll be wasting your time. You'll find that there have been many, many people in the same boat for months now and the only current solution is if you can get bestbuy to re-flash it. They and att are the only ones who have the firmware available.
Click to expand...
Click to collapse
Do they charge anything to re-flash it?
ryno9100 said:
Do they charge anything to re-flash it?
Click to expand...
Click to collapse
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
jd1639 said:
No, but you'll have to ask nicely and they may not do it if they see you tried to flash a recovery. Bring the phone in on download mode and tell them it froze while using kies.
Click to expand...
Click to collapse
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
ryno9100 said:
Well. time for the fun 1 hour drive to the closest Best Buy after work. Wooooooo *sarcasm*
Click to expand...
Click to collapse
Make sure they have a Samsung experience kiosk. Not all bestbuys have them
I took it to best buy with a samsung experience. Them and geek squad couldn't or wouldn't help me. They said to go online to unroot it and fix it.
Anybody know what trying to update to 4.3 will do?
Wayneman101 said:
Anybody know what trying to update to 4.3 will do?
Click to expand...
Click to collapse
if your recovery is still broken, nothing. you can use the Odin filed for MF3 or find the thread about someone who use a recovery flasher app to repair before doing the update.
Wayneman101 said:
Hello I just go my S4 today. I downloaded goomanager because I wanted to install TWRP. It did not work. Now when I try to reset back to factory settings I keep getting a screen that says downloading do not turn off target. How can I fix this and get it back to the normal recovery mode?
Click to expand...
Click to collapse
Hey... I jacked up my phone installing a custom recovery with GooManager too. It isn't for our phone. To get back to Android from DL mode just do power button+vol up+home and it will send ya back. Take it to Best Buy and say Kies broke your phone. You were trying to run an update and it messed it up. They can fix it for ya. Obviously you're rooted so just delete Superuser.apk and delete all root apps. Just in case. And don't be a derp and tell them the phone was rooted... Good Luck.
(Go back and hopefully they won't remember you.)
Sent from my SAMSUNG-SGH-I337
I tried putting in a rom earlier for my note 3 and it didn't take.
I ended up on that, vibration boot loop.
Odin still worked fine so I tried putting in an original stock rom with root, so I can add recovery.
I could not actually find a fully suitable rom choice, and the samsung website didn't play well with me either. firstly it would not let me register for some reason...anyway.
I am UK on O2 running 9005 SO I put in N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE
I don't know if that was the right choice, I set it up on PDA, and unclicked partition
It's been stuck possibly hanging on ext4 sys for over an hour.
The references I have seen suggest it takes a long time but how long is too long?
I don't want to pull the plug to brick the device completely.
I have a cwm recovery so all I need is to put the recovery back in and I should be good to go...
If this is hanging, what other options do I have?
How long is too long?
Any help fixing this would be greatly appreciated, and a drinks on me...
I am kinda freaking out, have seen similar threads, but because the firmwares are so different they didn't really help..or perhaps I misread things...but nothing really covered not being able to load the recovery software itself
consider me lizard brain in freak out mode right now..
please reply promptly with something.
Can you still boot to cwm or download mode only?
hey_joe said:
Can you still boot to cwm or download mode only?
Click to expand...
Click to collapse
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
8thsiner said:
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
Click to expand...
Click to collapse
Over one hour is too long to flash something even a full stock rom. Something is wrong there.
So you're saying you have no access to an original stock rom of your phone? If there is a problem like this flashing, I would flash the stock rom first then just root and install cwm. The first thing you want to do is have a working phone then just do the other stuff after like rooting, etc..
If what you posted is your stock rom, then download here and flash through odin.
There's also a newer one which is MK2 which you can download here.
Either one is stock.
Downloading the mk 2 now to test
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
No problem. Don't have paypal though and it's not necessary.
Enjoy your phone.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
Mate the reason you got into trouble was you weren't flashing a stock rom...
N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE means it has been altered and is considered custom...
A stock rom has not been altered.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
There are a lot of good people here that will help you. You don't need to give anything back. And be sure to ALWAYS have a NANDROID backup so that you can restore your phone if anything bad happens.
I tried installing UK firmware on my Galaxy S8+ using Odin, but it got stuck at system.img and now I can only boot the phone into download mode.
I've tried installing the original firmware as well but it also gets stuck at system.img.
Has this happened to anyone else? And is there anything I can do to fix this or am I ****ed?
Thank you very much in advance for any help
Did you use the most recent version of Odin (v3.13.1) ?
ruben1515 said:
Did you use the most recent version of Odin (v3.13.1) ?
Click to expand...
Click to collapse
Yep
nocuna said:
Yep
Click to expand...
Click to collapse
Did you select all files at once?
ruben1515 said:
Did you select all files at once?
Click to expand...
Click to collapse
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
nocuna said:
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
Click to expand...
Click to collapse
Try nand erase pit within Odin , hopefully this could bring it back ..
riseofsand said:
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
Click to expand...
Click to collapse
I just bought a Galaxy S9 so I'll try to flash using that cable. Thank you!
Scorpionea said:
Try nand erase pit within Odin , hopefully this could bring it back ..
Click to expand...
Click to collapse
I'll try that thanks, what does it do?
nocuna said:
I'll try that thanks, what does it do?
Click to expand...
Click to collapse
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Edit : try and see if u can find any emergency firmware aka repair firmware for you s8 if it exists and flash with that
Scorpionea said:
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Click to expand...
Click to collapse
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
nocuna said:
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
Click to expand...
Click to collapse
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Scorpionea said:
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Click to expand...
Click to collapse
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
nocuna said:
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
Click to expand...
Click to collapse
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
badaboomBURP said:
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Click to expand...
Click to collapse
I'll try that, thank you
riseofsand said:
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
Click to expand...
Click to collapse
I've triple-checked everything. Both Odin and the files are all up to date, and the files are from the same firmware I had on the phone before it got bricked.
I'm going to try using firmware from SamMobile instead of SamDB.org, and will post back with results.
UPDATE:
Flashed firmware from SamMobile, it went through and my phone works again. Can't believe I spent $7 on SamDB for faster download speed and all I got was some files that don't even work properly. Next time I'll be more patient I guess