The german huaweiblog got his hands on new firmware for Huawei Ascend Mate 7.
Device: MT7-L09 West European
Link http://www.huaweiblog.de/huawei/huawei-ascend-mate-7-b127-firmware-leak-erster-erfahrungsbericht/
Downloadlink Should be https://mega.co.nz/#!0g83WTgY!gonoZteVZN3RzqCMqUMeSYfeOKegPgI_I0-baTZe53k
For people already rooted & on cwm recovery, how can the update be done?
is it
fastboot flash recovery recovery_stock.img
Just flashed it. Seems like it reset everything. Setting up my phone from scratch now....
That's what they mention. Everything will be erased. There is a word file describing the procedure in the zip provided that says so.
Nothing is moved.
You need to flash the stock recovery
If you do a local update, nothing is erased.
lrcquest said:
For people already rooted & on cwm recovery, how can the update be done?
is it
fastboot flash recovery recovery_stock.img
Click to expand...
Click to collapse
If you flashst on Power Vol, no. Can you make custom recovery on it. For root you can then use the recovery_h60.img. Still works. Then have to do is flash SuperSU.
Any improvements?
Any improvements ? bros .... plz tell me
Just updated it ..... it's seemed nice ... battery's much improved IMO .....
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
desmoloch said:
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
Click to expand...
Click to collapse
No problem with my Sony Smartwatch 2. Not with this update, not before. Did you check Smart connect NOT to close when screen is closed? You have to give it access even when sceen is closed.
Search in settings -> protected apps.
Manual update doesn't delete anything. My fault. @andrewin was right.
SawMin said:
Any improvements ? bros .... plz tell me
Click to expand...
Click to collapse
Compared to B120, Traffic management was added to Wireless tab and Touch ID sensitivity improved. It was also in B121 already.
However B121 had worse battery performance vs B120, which was fixed in B127.
In summary, B127 has the same battery as it was in B120 plus the same smoothness as in B121. Good job, Huawei. Hope to get 5.0 soon.
Fooox1 said:
If you flashst on Power Vol, no. Can you make custom recovery on it. For root you can then use the recovery_h60.img. Still works. Then have to do is flash SuperSU.
Click to expand...
Click to collapse
So do I have to get back to stock recovery to update to 127 or can I do the update having a custom recovery?
tried, new theme selection added
freco said:
No problem with my Sony Smartwatch 2. Not with this update, not before. Did you check Smart connect NOT to close when screen is closed? You have to give it access even when sceen is closed.
Search in settings -> protected apps.
Manual update doesn't delete anything. My fault. @andrewin was right.
Click to expand...
Click to collapse
Smartconnect and smartbandy are protected. I did not change it after the update.
Its very strange since the update: today morning my smartband connect and diconnected and disconnect and so on... Rebooted my mate an now its fine. Same happened yesterday!
One thing is "New" since 127: Bluetooth connects to my car radio even there is already a connection Form another phone!! -> my girlfriend played music with her ihpone and if i activate BT my phone disconnects the iPhone. Thats definitly New. Before the first phone connected stays connected
desmoloch said:
...Before the first phone connected stays connected
Click to expand...
Click to collapse
Looks like after update, Mate is more agressive.
iPhone confirm its alias, iFail again.
lrcquest said:
So do I have to get back to stock recovery to update to 127 or can I do the update having a custom recovery?
Click to expand...
Click to collapse
Yes, you can if you flashst about Volume + Power (forced-mode). If you want to flash via the internal function, then you need stock recovery.
desmoloch said:
Found no improvements. Bluetooth is buggy my Sony smartband swr10 is always reconnecting. Seems like LE problem. Downgrade with local update to sp04 not possible...
I will try a force downgrade. Dont use that Version if you have BT devices...
Maybe i will root my device to get a logcat
Click to expand...
Click to collapse
Me working BT fine. Without any problem. Car Nokia CKW BT.
R2D20208 said:
Me working BT fine. Without any problem. Car Nokia CKW BT.
Click to expand...
Click to collapse
OK Bluetooth only buggy for me i had that "Connect and reconnect" yesterday and today. Always fixed after reboot. When it happens again i have to find a solution.
And yes i'm happy that my mate is now more aggressive then iPhone
//edit: Bluetooth again conecting and reconnecting
//edit2: how can i go back to sp04?
desmoloch said:
OK Bluetooth only buggy for me i had that "Connect and reconnect" yesterday and today. Always fixed after reboot. When it happens again i have to find a solution.
And yes i'm happy that my mate is now more aggressive then iPhone
//edit: Bluetooth again conecting and reconnecting
//edit2: how can i go back to sp04?
Click to expand...
Click to collapse
Use Stock Recovery, and dload folder 04. ( wipe recommented )
Related
hi i need help
i ahve ZTE U930HD on 4.0.3 android version
i want to root it and upgrade it
could anybody help me
I need help too, and need help with 3g network.
How do you modify modem.img for 3g network?
Anyone?
NomiRana said:
hi i need help
i ahve ZTE U930HD on 4.0.3 android version
i want to root it and upgrade it
could anybody help me
Click to expand...
Click to collapse
I rooted it with this tool:
http://pan.baidu.com/share/link?shareid=431343&uk=2147697835
it is in chinese, but is pretty automatic.
It will flash you a recovery mod in chinese also.
Still trying to find a recovery in english at least.
chinese...
Hello, how i root the phone with this app? I installed it and the superuser too, but dont know, how to reboot to the recovery :-/ Can you tell me, how you do that?
tweetycontrabajo said:
I rooted it with this tool:
it is in chinese, but is pretty automatic.
It will flash you a recovery mod in chinese also.
Still trying to find a recovery in english at least.
Click to expand...
Click to collapse
dlouhyo said:
Hello, how i root the phone with this app? I installed it and the superuser too, but dont know, how to reboot to the recovery :-/ Can you tell me, how you do that?
Click to expand...
Click to collapse
reboot in to recovery, power off the phone, and power on, pressing volume down, until it enters recovery mode.
tweetycontrabajo said:
reboot in to recovery, power off the phone, and power on, pressing volume down, until it enters recovery mode.
Click to expand...
Click to collapse
It worked, thx. But now, I had a bigger problem. After I rooted the phone, it cant connect to the mobile network, I even can´t make a phone call. I write - No service. I tried 3 sim cards including my own, which worked in this phone before the root :-/ I cant install gapps, becose it write, that it cant verify the signature. Can this be undone somehow? Because now the phone is useless
dlouhyo said:
It worked, thx. But now, I had a bigger problem. After I rooted the phone, it cant connect to the mobile network, I even can´t make a phone call. I write - No service. I tried 3 sim cards including my own, which worked in this phone before the root :-/ I cant install gapps, becose it write, that it cant verify the signature. Can this be undone somehow? Because now the phone is useless
Click to expand...
Click to collapse
flash the stock firmware.
tweetycontrabajo said:
flash the stock firmware.
Click to expand...
Click to collapse
I'd like to, but i don't know, where to find it and how to do it. Could it be done from some back up, that you can create from your phone?
dlouhyo said:
I'd like to, but i don't know, where to find it and how to do it. Could it be done from some back up, that you can create from your phone?
Click to expand...
Click to collapse
i don't have the phone. sorry, you need to google the firmware yourself.
tweetycontrabajo said:
i don't have the phone. sorry, you need to google the firmware yourself.
Click to expand...
Click to collapse
I fix it with original zte update. Now its working like new, even the mobile data i working
dlouhyo said:
I fix it with original zte update. Now its working like new, even the mobile data i working
Click to expand...
Click to collapse
How can i use "the original zte update"? Could you please give a link? I would like to try rooting but first want to be sure i can redo it.
Hello ,
i have LG G2 4.4.2 and i can't use OSP because the app want me to update the computer software , i tried and when im launching "OSPLiveUpdate" it's open the software and it's still want me to update ...
what can i do ?
Thanks .
ozal5 said:
Hello ,
i have LG G2 4.4.2 and i can't use OSP because the app want me to update the computer software , i tried and when im launching "OSPLiveUpdate" it's open the software and it's still want me to update ...
what can i do ?
Thanks .
Click to expand...
Click to collapse
It indicates that your PC OSP tool is out of date.
Update it.
(if the Update button grayed out then reboot the PC)
votinh said:
It indicates that your PC OSP tool is out of date.
Update it.
(if the Update button grayed out then reboot the PC)
Click to expand...
Click to collapse
how to update ? when i use the "update.exe" it wasn't work.
how to ?
ozal5 said:
how to update ? when i use the "update.exe" it wasn't work.
how to ?
Click to expand...
Click to collapse
Have you gotten the OSP tool installed on your PC?
votinh said:
Have you gotten the OSP tool installed on your PC?
Click to expand...
Click to collapse
i only have OSP ... i don't know about the tool.
ozal5 said:
i only have OSP ... i don't know about the tool.
Click to expand...
Click to collapse
Uhhhh.....
Let's so down.
OSP is a built-in feature on the LG G2.
In order to use it, you need
1. turn on this feature on the G2 phone (under PC connectivity) AND
2. get the OSP tool installed on the computer that you want to use this feature
For item 2. you need to go onto the LG support site, download the tool then install it.
Do that first if you haven't done that yet.
votinh said:
Uhhhh.....
Let's so down.
OSP is a built-in feature on the LG G2.
In order to use it, you need
1. turn on this feature on the G2 phone (under PC connectivity) AND
2. get the OSP tool installed on the computer that you want to use this feature
For item 2. you need to go onto the LG support site, download the tool then install it.
Do that first if you haven't done that yet.
Click to expand...
Click to collapse
i did it , but when i try connect to the phone with the computer software the phone tells me that i need update my computer software.
ozal5 said:
i did it , but when i try connect to the phone with the computer software the phone tells me that i need update my computer software.
Click to expand...
Click to collapse
If I understand you correctly, you do have the OSP tool installed on your PC AND you do turn on OSP feature on your phone.
Right? I assume that's what you said.
If that's the case, then reread my post above, UPDATE IT.
Update the OSP tool on your PC.
When you invoke (open) the tool, there will be an icon shown in the Status bar (where volume, network, action center, ... icon shown)
Click on it (can't remember RMB or LMB) to bring up its menu then select Settings.
From there, you will see the firmware version and Update button.
votinh said:
If I understand you correctly, you do have the OSP tool installed on your PC AND you do turn on OSP feature on your phone.
Right? I assume that's what you said.
If that's the case, then reread my post above, UPDATE IT.
Update the OSP tool on your PC.
When you invoke (open) the tool, there will be an icon shown in the Status bar (where volume, network, action center, ... icon shown)
Click on it (can't remember RMB or LMB) to bring up its menu then select Settings.
From there, you will see the firmware version and Update button.
Click to expand...
Click to collapse
Oh Thanks i did it , the version is :
http://gyazo.com/faf4870bdfbae7aee3fe15203e437aaf
i can't use it ... the phone still keep saying me that i need update the software ...
ozal5 said:
Oh Thanks i did it , the version is :
http://gyazo.com/faf4870bdfbae7aee3fe15203e437aaf
i can't use it ... the phone still keep saying me that i need update the software ...
Click to expand...
Click to collapse
Brother, I am starting losing patient with you.
Did you even read what I said? Sigh!
You have an old version, UPDATE IT.
If the Update button grayed out then REBOOT your PC .......... then redo it (check and update it again)
I'm here to help but you need to follow what I said, bro.
votinh said:
Brother, I am starting losing patient with you.
Did you even read what I said? Sigh!
You have an old version, UPDATE IT.
If the Update button grayed out then REBOOT your PC .......... then redo it (check and update it again)
I'm here to help but you need to follow what I said, bro.
Click to expand...
Click to collapse
Im sorry , okay look what i did , i reboot my pc , after i open again the settings and checked if the update button isn't grayed out , i found that it's grayed out ,,,
what can i do now ?
ozal5 said:
Im sorry , okay look what i did , i reboot my pc , after i open again the settings and checked if the update button isn't grayed out , i found that it's grayed out ,,,
what can i do now ?
Click to expand...
Click to collapse
I can't remember on top of my head which is the latest, but if my memory serves me well, it should be 4.2.x.x something, not 4.0.x.x.
After rebooting, what is it now?
R yr PC on the net?
votinh said:
I can't remember on top of my head which is the latest, but if my memory serves me well, it should be 4.2.x.x something, not 4.0.x.x.
After rebooting, what is it now?
R yr PC on the net?
Click to expand...
Click to collapse
it's still like this :
http://gyazo.com/1e9a0903a7a668895827a3a717512c6a
and , my pc on the net , it want me to update but like i said before i can't.
Why you tick off the mark "Check for update ..... " ?
votinh said:
Why you tick off the mark "Check for update ..... " ?
Click to expand...
Click to collapse
i did it for check if it's bug but isn't.
Thanks.
Same issue
Same issue here. Latest version says 4.0.004.130823 which is what we have. But if we try to connect the phone to the pc it says please update software on pc.
I don't really know what you guys have done but I do it w/o any problem.
In fact, I just uninstalled everything and restarted from scratch.
Everything is OK as normal. It is on Windows 7.
votinh said:
I don't really know what you guys have done but I do it w/o any problem.
In fact, I just uninstalled everything and restarted from scratch.
Everything is OK as normal. It is on Windows 7.
Click to expand...
Click to collapse
Mind if you update yours to the latest version and then upload a zipped archieve with all the files for us? Thanks!
ozal5 said:
Im sorry , okay look what i did , i reboot my pc , after i open again the settings and checked if the update button isn't grayed out , i found that it's grayed out ,,,
what can i do now ?
Click to expand...
Click to collapse
same problem for me
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
jakeh9777 said:
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
Click to expand...
Click to collapse
What is your setup? Are you rooted?
Nandr0idC0nsumer said:
What is your setup? Are you rooted?
Click to expand...
Click to collapse
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
jakeh9777 said:
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
Click to expand...
Click to collapse
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Nandr0idC0nsumer said:
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Click to expand...
Click to collapse
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
jakeh9777 said:
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
Click to expand...
Click to collapse
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Nandr0idC0nsumer said:
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Click to expand...
Click to collapse
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
jakeh9777 said:
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
Click to expand...
Click to collapse
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
I have PD1 I was trying to get PF4 with SamFirm but it downloaded PD1 so I was confused. That's all. I know about that was rooted while back once before but I messed things up so I unrooted.
So can use that one?
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
Thanks for the help... it's Fixed!
jakeh9777 said:
Thanks for the help... it's Fixed!
Click to expand...
Click to collapse
Great!
Who has the Nokia 6 TA-1000, without the update function or some language lingo, IT'S FOR YOU !!!
Is this a full version of the firmware?
If I hold down both the volume up and down button, my device just keeps shutting off.
Trying to load it from bootloader mode the QFIL software says no Port Available.
I have not enabled USB debugging as I tried installing a zip of one of the updates and was not aware that my phone had been modded so now I cannot get into anything but recovery mode and bootloader mode.
aNorthernSoul said:
Is this a full version of the firmware?
If I hold down both the volume up and down button, my device just keeps shutting off.
Trying to load it from bootloader mode the QFIL software says no Port Available.
I have not enabled USB debugging as I tried installing a zip of one of the updates and was not aware that my phone had been modded so now I cannot get into anything but recovery mode and bootloader mode.
Click to expand...
Click to collapse
Yes, this is the full version of the firmware!
Read carefully § 4 - 9! And do as described!
I had the same problem with the phone as you do, but now everything works fine !!!
I will answer questions if that is not clear.
(I have English through an interpreter)
Evgeny_14 said:
Yes, this is the full version of the firmware!
Read carefully § 4 - 9! And do as described!
I had the same problem with the phone as you do, but now everything works fine !!!
I will answer questions if that is not clear.
(I have English through an interpreter)
Click to expand...
Click to collapse
Yeah, I got it figured out. It's sending to the phone now. Thanks!
---------- Post added 23rd July 2017 at 12:00 AM ---------- Previous post was 22nd July 2017 at 11:34 PM ----------
Thanks again! You saved my soft bricked phone. It is not seeing the July update. Should this rom be able to get new updates automatically?
I have a Nokia 6 TA-1000 Prototype Phone, but I need to backup it before flashing it.
Can I repost the firmware to Chinese forums like DOSPY?
Or, do you have any idea of how to backup the firmware? Or build a TWRP for Nokia 6 TA-1000? My Nokia 6 Prototype has an unlocked bootloader.
Evgeny_14 said:
Who has the Nokia 6 TA-1000, without the update function or some language lingo, IT'S FOR YOU !!!
In the firmware all languages are present, Android 7.1.1 with update function !!!
So:
1. Download firmware (all in one folder), kindly provided by CECT-SHOP.com
2. You need a cable (Flash Cabel),
I made it from the cable that came with the phone (it was not a pity).
It is important to do as in the picture!
3. Unzip the firmware!
4. Turn off the phone
5. Connect the cable to the phone, but do not connect to the computer!
6. IMPORTANT !!! While holding down the volume and volume keys -
Close the black and green wire connect to the computer
7. Hold down the + and - keys to separate the contacts but keep the keys squeezed !!!
8. run the QFIL program and select the files from the Nokia_6 folder, BUT KEYS + and - HOLD !!!
9. Press Download and hold the keys for 5 more seconds and release.
10.The firmware will begin.
After about 5 minutes you will see a blue line of the process, when the phone is flashed, you will hear the sound of rebooting the phone.
11. Everything is ready!
P.S. If you do not hold both the + and - keys at the same time, you will get an error in the firmware process.
Click to expand...
Click to collapse
Thanks! This solution works!
It will flash the firmware as 00CN_3_17B, the Android security patch level is updated till 1 May 2017.
The "System Updates" feature is there, thou it seems unable to get any updates.
Probably is a TA-1003 firmware, but it is very good, better than my phone is stuck at recovery mode.
A point of note, if your firmware downloading fails, it probably because you need to update the "HS-USB QDLoader 9008" driver to the Qualcomm ones.
Please try to upload firmware on google drive or some file hosting website
maroof.saeed said:
Please try to upload firmware on google drive or some file hosting website
Click to expand...
Click to collapse
Cerrected
FEE
:good:Flash cable...
Cut down black and green cable
am i right
koba420 said:
:good:Flash cable...
Cut down black and green cable
am i right
Click to expand...
Click to collapse
Yeah, I found just the green one was enough. It basically allows you to plug in the phone without it powering on, then you reconnect it where instructed and it powers on. It's what gets the phone into Emergency Download Mode so that the phone is ready, the correct drivers load and the flashing software can talk to the phone.
Updates still don't work though and manually installing one still soft bricked my phone and I had to flash it a second time.
aNorthernSoul said:
Yeah, I found just the green one was enough. It basically allows you to plug in the phone without it powering on, then you reconnect it where instructed and it powers on. It's what gets the phone into Emergency Download Mode so that the phone is ready, the correct drivers load and the flashing software can talk to the phone.
Updates still don't work though and manually installing one still soft bricked my phone and I had to flash it a second time.
Click to expand...
Click to collapse
Basically for updates, we must make sure our phone current firmware is exactly the same as indicated in the update.zip, check the version in the "metadata".
It sure fails when the update package detected that the phone firmware is different from the package requirement.
I have an update.zip but it requires to update from 00CN_3_17A, but my flashed firmware is 00CN_3_17B, can't use it hahaha :crying:
iammrwesley said:
Basically for updates, we must make sure our phone current firmware is exactly the same as indicated in the update.zip, check the version in the "metadata".
It sure fails when the update package detected that the phone firmware is different from the package requirement.
I have an update.zip but it requires to update from 00CN_3_17A, but my flashed firmware is 00CN_3_17B, can't use it hahaha :crying:
Click to expand...
Click to collapse
My firmware was 00CN_1_320 the phone did not work.
Now it's 00CN_3_17B and it works fine.
Evgeny_14 said:
My firmware was 00CN_1_320 the phone did not work.
Now it's 00CN_3_17B and it works fine.
Click to expand...
Click to collapse
That's what mine is. Are they getting updates automatically or manually installing successfully? Mind pointing me to the update you installed if manually?
iammrwesley said:
Basically for updates, we must make sure our phone current firmware is exactly the same as indicated in the update.zip, check the version in the "metadata".
It sure fails when the update package detected that the phone firmware is different from the package requirement.
I have an update.zip but it requires to update from 00CN_3_17A, but my flashed firmware is 00CN_3_17B, can't use it hahaha :crying:
Click to expand...
Click to collapse
According to this, I'd guess this is actually firmware for the TA-1003. That's what the B stands for. Sigh...
http://nokiamob.net/2017/05/06/may-...a-6-android-7-1-1-update-for-ta-1003-variant/
aNorthernSoul said:
According to this, I'd guess this is actually firmware for the TA-1003. That's what the B stands for. Sigh...
Click to expand...
Click to collapse
Sad to say, yes. V3.17B is the firmware for TA-1003 HK/Taiwan region, the next minor update around 150MB and there is no version number, hence I can't find the update.zip.
But really thanks the thread starter to provide the ROM, we have at least something to use. Meanwhile we just use along and see if anybody release the stock ROM for TA -1000
iammrwesley said:
Sad to say, yes. V3.17B is the firmware for TA-1003 HK/Taiwan region, the next minor update around 150MB and there is no version number, hence I can't find the update.zip.
But really thanks the thread starter to provide the ROM, we have at least something to use. Meanwhile we just use along and see if anybody release the stock ROM for TA -1000
Click to expand...
Click to collapse
Yup, totally agree on all counts.
I had wrote to CECT-shop.
They had only this ROM, and nothing else.
They seems unaware that this ROM is for TA-1003.
No luck with China forums either.
So the ones that have T-1000 with april modified rom donot flash this rom? or i guess we have to flash this rom so that we can get the google apps plus the updates too?
iammrwesley said:
Thanks! This solution works!
It will flash the firmware as 00CN_3_17B, the Android security patch level is updated till 1 May 2017.
The "System Updates" feature is there, thou it seems unable to get any updates.
Probably is a TA-1003 firmware, but it is very good, better than my phone is stuck at recovery mode.
A point of note, if your firmware downloading fails, it probably because you need to update the "HS-USB QDLoader 9008" driver to the Qualcomm ones.
Click to expand...
Click to collapse
iammrwesley said:
I had wrote to CECT-shop.
They had only this ROM, and nothing else.
They seems unaware that this ROM is for TA-1003.
No luck with China forums either.
Click to expand...
Click to collapse
Can you guide yourself better?
What is the picture follow? What does the cable do?
The volume hold button is also down.
My phone is TA-1000.
In Recovery mode are: Power button + volume up + cable connection, in logo Android 5s release volume button still hold power button.
The power button + decrease the volume + connect the cable, in the logo Android 5s release the volume down button to keep the power button then it to Download mode.
Can you help me....
maroof.saeed said:
So the ones that have T-1000 with april modified rom donot flash this rom? or i guess we have to flash this rom so that we can get the google apps plus the updates too?
Click to expand...
Click to collapse
Coz my phone was already soft bricked, so this thread is of a great help.
If your phone is without Google apps, pls go ahead.
But if your phone is already working fine, then DON'T. This ROM security update is only until May 2017, where in fact the actual update is already until July 2017.
I have buy the new ones yesterday, and then I'm realise that my ZenFone 3 ZE520KL cannot connect with WIFI in 5Ghz frequency. Is this any clue to solve the problem. I work with any installation Access Point with 5Ghz band, thats why I've buy this gadget. Please help me...
Try to report this on ZenTalk. ASUS Representatives can help you with this issue
Saktis_STi said:
Try to report this on ZenTalk. ASUS Representatives can help you with this issue
Click to expand...
Click to collapse
I just wonder, is it realy just my phone have the problem like this? Is there anyone have the same model with my phone and trying to connect 5Ghz access point wifi, and no problem?
apikson said:
I just wonder, is it realy just my phone have the problem like this? Is there anyone have the same model with my phone and trying to connect 5Ghz access point wifi, and no problem?
Click to expand...
Click to collapse
Try to restart your Wi-Fi router & test again.
Saktis_STi said:
Try to restart your Wi-Fi router & test again.
Click to expand...
Click to collapse
Like I said before, I work with any installation Access Point with 5Ghz band. So far, with many Access Point there is no one can connect.
apikson said:
Like I said before, I work with any installation Access Point with 5Ghz band. So far, with many Access Point there is no one can connect.
Click to expand...
Click to collapse
Try factory reset then
Saktis_STi said:
Try factory reset then
Click to expand...
Click to collapse
You think I need to do factory reset with the phone that I just unboxing 3 days ago???
BTW thankyou for your fast respond....
apikson said:
You think I need to do factory reset with the phone that I just unboxing 3 days ago???
BTW thankyou for your fast respond....
Click to expand...
Click to collapse
Well, it's recommended though
Which firmware are you using right now?
Saktis_STi said:
Well, it's recommended though
Which firmware are you using right now?
Click to expand...
Click to collapse
MMB29P.WW_Phone-13.20.10.140-200161117, is that what you meant?
Saktis_STi said:
Well, it's recommended though
Which firmware are you using right now?
Click to expand...
Click to collapse
MMB29P.WW_Phone-13.20.10.140-200161117, is that what you meant?
apikson said:
MMB29P.WW_Phone-13.20.10.140-200161117, is that what you meant?
Click to expand...
Click to collapse
This firmware is so old. Try to upgrade to Android Oreo by using this method:
Make sure you’ve backed up all of your IMPORTANT DATA before downgrading/returning to stock ROM.
I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
1) Download Oreo RAW (15.0410.1803.55) firmware here:
ZE520KL:
ZE552KL:
2) Download ASUS Flash Tool here:
3) Install ASUS Flash Tool
4) Now, power off your device and enter Fastboot mode by pressing Power Button + Volume Up button
5) Open ASUS Flash Tool and select your device
6) Select the RAW firmware you've downloaded
7) Click on the Serial Number of your device.
8) Click Start and wait 5-10 minutes (ignore error 5 [FRP ERROR])
9) Congratulations, you have upgraded directly to Oreo.
MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Saktis_STi said:
This firmware is so old. Try to upgrade to Android Oreo by using this method
Download Oreo RAW (15.0410.1803.55) firmware here:
Click to expand...
Click to collapse
After upgrading, you may receive new update from ASUS. Install this OTA & I suggest you to factory reset your phone to make sure that your phone is clean