Related
Hello,
I downloaded the latest firmware for P6800 "P6800XXLB4 3.2 P6800XEFLC1 France February 2012"
I made a flash with odin and now I have an error message
"Encountered year after firmware upgrade, please select kies in recovery mode and try again".
With odin I always "Failed" ...
how do I do now?
Best regard
Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset
biopsin said:
Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset
Click to expand...
Click to collapse
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.
damien92220 said:
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.
Click to expand...
Click to collapse
You shouldn't have to do a factory reset when flashing with odin. Odin wipes the whole drive and flashes from scratch-- it may not wipe the partition table or individual partitions, but it at least reformats each partition as if it were new. I'd recommend rolling back to your original firmware.
Sent from my GT-P6800 using XDA Premium HD app
Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
damien92220 said:
Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ICS IS OUT!!! See if that helps!
Sent from my GT-P6800 using XDA Premium HD app
Same here...
Hello all,
I added a screen dump. First time I tried to flash with the update in the CSC option... I downloaded the file and the G6800 Odin package from Sammobile. Before to go to sleep quickly tried to upgrade but then I messed things up.
I tried various modes. Can someone help me?
Thanks!
Please try to read the instructions for Odin...
http://forum.xda-developers.com/showthread.php?t=1469635
I'll quote the relevant part for you because you missed it somehow:
xenix96 said:
PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Click to expand...
Click to collapse
If it's already been written and it's not the right one you'll need to find a valid pit file for your model of Tab (P6800 or P6810) to fix it. You'll have to search for it though, I don't know where to find them.
solution
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT
Thanks for the solution!
Co_OL 1977 said:
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT
Click to expand...
Click to collapse
Could you please attach the required PIT file? It is not in your message! En bedankt voor de oplossing!!!
PIT File
Lol not uploaded
Settings
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)
woevanda said:
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1469635
It explains everything here, evwn how to flash a pit file, and which boxes to check and such.
same problem..help needed asap..thanks
Succeeded!
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
My 7.7 is now running on Android 4.04. Thanks!!!
Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.
krazykat said:
Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.
Click to expand...
Click to collapse
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
If your battery is completely discharged, the ten minutes before you see that your device is loaded.
Click to expand...
Click to collapse
Co_OL 1977 said:
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
Click to expand...
Click to collapse
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?
krazykat said:
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?
Click to expand...
Click to collapse
i'm having the same problem with my tab 7.7, can someone guide us through this. I already followed the instructions from the guide of flashing rom but none of this work. TIA.
Thank you...
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
I also experienced the error when doing the update to ICS recently and spent long hours trying to figure out and checking forums.
I tried the PIT file attached by "CL 1977" and it worked like a charm. :good:
Now running ICS 4.0.4. :fingers-crossed:
Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated
Bananmos said:
Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated
Click to expand...
Click to collapse
did you tried flashing stock fw with pit file?
samersh72 said:
did you tried flashing stock fw with pit file?
Click to expand...
Click to collapse
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.
Bananmos said:
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.
Click to expand...
Click to collapse
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file
samersh72 said:
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file
Click to expand...
Click to collapse
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.
Bananmos said:
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.
Click to expand...
Click to collapse
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition
samersh72 said:
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition
Click to expand...
Click to collapse
Ohh ok, I select them both at the same time in Odin?
Bananmos said:
Ohh ok, I select them both at the same time in Odin?
Click to expand...
Click to collapse
yes.
did it succeed when flashed fw alone in pda first?
samersh72 said:
yes.
did it succeed when flashed fw alone in pda first?
Click to expand...
Click to collapse
The download isnt finished yet, its very slow. I will try just the fw first and let you know. If that dosent work ill try it with the pit file.
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok thank you very much. Will tell you what happens
samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok, first I tried without the pit file and its says in Odin that it failed. In the messages windows it says:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!
I then tried with the pit file and fw but it faild aswell. In the message window it said
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
Is there something else I can try? Is it possible that this could be something wrong with the hardware?
Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium
Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app
Bananmos said:
Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Same result
Sent from my Galaxy Nexus using xda premium
samersh72 said:
Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!
Bananmos said:
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!
Click to expand...
Click to collapse
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium
samersh72 said:
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Hi , i really like you are HELPING us !!!! :good: Good guy :angel:
Thanks from all of us .
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
lethcore said:
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
Click to expand...
Click to collapse
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
donalgodon said:
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
Click to expand...
Click to collapse
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
The good news is that Download mode is still working. AS long as that's the case, you can get it back. Just keep trying. Switch PCs, switch cables, switch ports, re download a different stock ROM, etc. do whatever it takes to try every variable you can think of.
Eventually, you'll find what's causing it and the ROM will flash successfully. When that happens, get immediately into recovery and wipe data.
(Remove the battery after it flashes, but it back in and hold vol-up+home+power.)
After the data wipe....
Reboot.
Like I said, Download mode means you can find a way to flash, but working with Odin to resolve these issues can sometimes be a PITA. I've had the same thing myself before. Just don't give up. Try to stay calm, and work your way through it. You'll get it eventually.
Edit: Just noticed that you flashed a CHINA firmware. (Why? ) You may be facing this issue because (I think) they use a different pit. There's a thread devoted to resurrecting the device with pit. Maybe check it out.
lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
dont flash China or Hong kong firmwares.
please post odin progression
samersh72 said:
dont flash China or Hong kong firmwares.
please post odin progression
Click to expand...
Click to collapse
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
lethcore said:
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
Click to expand...
Click to collapse
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
lethcore said:
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
recovery is flashed, try to boot into it and make the wipe then re-flash stock, re-wipe.
if not, flash a custom recovery, format system, cache, re-flash stock, re-wipe
@donalgodon
Why ? well i got the I9500 in hong kong (im actually based in china now) (not Chinese though) thought i'll see some nice changes? but seems i fK'ed the phone.... pit? i haven't a clue man pit number? think i've KILLED HER... lol (i never knew the dangers of Chinese firmware) - wont be going down that route again.
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
lethcore said:
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
Click to expand...
Click to collapse
flash custom recovery,
if not see my signature for flashing right pit with the firmware
samersh72 said:
flash custom recovery,
if not see my signature for flashing right pit with the firmware
Click to expand...
Click to collapse
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
lethcore said:
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
Click to expand...
Click to collapse
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
samersh72 said:
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
Click to expand...
Click to collapse
Well you be happy to know
installed the previous firmware and that pit file for I9500 from your sig and everything seems well... booted correctly nothing lost all seems good to early to tell but will keep you informed !
THANK YOU!!!
I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
MrAndroid12 said:
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
Click to expand...
Click to collapse
Thank you for that advice. How do I add a .pit file, and would you happen to have a link where I can download it from?
rinuvimal said:
Thank you for that advice. How do I add a .pit file, and would you happen to have a link where I can download it from?
Click to expand...
Click to collapse
search better mate http://forum.xda-developers.com/showthread.php?t=2550823
tasked28m said:
search better mate http://forum.xda-developers.com/showthread.php?t=2550823
Click to expand...
Click to collapse
I've tried all the .pit files in that thread, bro. None work. Cannot generate own pit as in phone is in recovery mode.
rinuvimal said:
I've tried all the .pit files in that thread, bro. None work. Cannot generate own pit as in phone is in recovery mode.
Click to expand...
Click to collapse
i know cfautoroot has the correct pit file in , try rooting your phone with cfautoroot.
MrAndroid12 said:
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
Click to expand...
Click to collapse
I tried a variety of N9005 .pits and each time, it shows PIT FAIL: TOTAL SECTORS (30777344) :crying:
(Read OP) . Try flashing the polish firmware again with odin v1.85 and try using different usb ports. Close most of your running applications such as firefox skype etc that can interrupt the process and flash official firmware.
tasked28m said:
(Read OP) . Try flashing the polish firmware again with odin v1.85 and try using different usb ports. Close most of your running applications such as firefox skype etc that can interrupt the process and flash official firmware.
Click to expand...
Click to collapse
Whenever I try the 4.4.2 polish, it fails at system.img.ext4. When I try 4.3, it fails at aboot.
Here's the Odin log for 4.4.2 polish:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
bootloop note 3
After installig android 4.4.2, i tried to root with cf-root, now it is in a loop.
I cannot come into in recovery mode.
The phone starts with: -recovery booting,-recovery is not seandroid enforcing,- set warrant bit recovery
when i keep the battery out and then put it in, it says again -recovery booting,-recovery is not seandroid etc.
Who can help me????
rinuvimal said:
Whenever I try the 4.4.2 polish, it fails at system.img.ext4. When I try 4.3, it fails at aboot.
Here's the Odin log for 4.4.2 polish:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You won't be able to downgrade back to 4.3 - Use the PDA slot on ODIN and try flashing again.
poedy said:
After installig android 4.4.2, i tried to root with cf-root, now it is in a loop.
I cannot come into in recovery mode.
The phone starts with: -recovery booting,-recovery is not seandroid enforcing,- set warrant bit recovery
when i keep the battery out and then put it in, it says again -recovery booting,-recovery is not seandroid etc.
Who can help me????
Click to expand...
Click to collapse
I answered in your other thread about this...
rinuvimal said:
I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Click to expand...
Click to collapse
try to downlaod and flash the 4.4.2 tar again, you cant downgrade to 4.3 as your bootlaoder got upgraded
Edit- darn am i too slow or are you too fast today @radicalisto? second time...LOL :good:
Khizar said:
try to downlaod and flash the 4.4.2 tar again, you cant downgrade to 4.3 as your bootlaoder got upgraded
Edit- darn am i too slow or are you too fast today @radicalisto? second time...LOL :good:
Click to expand...
Click to collapse
15 hour sleep man, seems to have me buzzing around lol :highfive:
Solution
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
m1ndst0rm said:
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
Click to expand...
Click to collapse
Have you tried rooting it with Chainfire's CF-Auto Root yet?
m1ndst0rm said:
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
Click to expand...
Click to collapse
can you show the download link for the leaked rom with 4 files?
vndnguyen said:
can you show the download link for the leaked rom with 4 files?
Click to expand...
Click to collapse
I have no permission to post links yet, but try googling for N3KitKat.rar.torrent
Leaked download link is in my sig (not this cause I am on xda app l check my other posts)
Sent from my SM-N9005 using XDA Premium 4 mobile app
ManUtdRul3 said:
Have you tried rooting it with Chainfire's CF-Auto Root yet?
Click to expand...
Click to collapse
Just tried latest one, ended up in bootloop with "KERNEL IS NOT SEANDROID ENFORCING"...
Now flashing original ROM again.
m1ndst0rm said:
Just tried latest one, ended up in bootloop with "KERNEL IS NOT SEANDROID ENFORCING"...
Now flashing original ROM again.
Click to expand...
Click to collapse
Seems to be a common problem. Hopefully an update to it will fix it.
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.