Database Users

S4 I9500 Bricked while installing rom...

Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?

Anybody? I need my phone back :S

chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.

spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.

If u can boot to recovery flash a custom rom then flash stock via odin

aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...

Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power

aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.

This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again

aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...

Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error

chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.

navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.

I think u should try flashing some other stock firmware I hav had the prblm before

aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...

It should work I did the same thing but cant say anything

aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.

spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.

Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app

lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.

[Q] Soft brick at&t note 3?

Hi
I have AT&T Note 3 , sim unlock from carrier, successful kingo root 0x0 Knox (startup splash screen says Custom Unlock)
So, I was hopped up on percocets because of my recent surgery and i decided i was in conscious enough mind to tackle getting AWS unlock. I wasn't.
I was reading about chainfire regionaway app, so i went to the app store and downloaded the first chainfire app that popped up - 3D. so now i am stuck in the note 3 splash screen. yes i know i should have read it more carefully, etc. but i just wasn't all there at the time. Please help me save this $500 brick!
I've been reading these methods:
http://www.droidviews.com/how-to-unbrick-att-galaxy-note-3-sm-n900a/
i can get the phone recognized in ODIN, but the secure check fail: cache occurs
http://forum.xda-developers.com/showthread.php?t=2567133
i can't download any of these files...
http://forum.xda-developers.com/showthread.php?t=2507403
tried this but didn't work.
i'm really not making any headway... any help would be much appreciated.
side note:
can i send this in for warranty? Since AT&T just release the kitkat update can i claim that i tried to update and it failed?
current binary: samsung official
system status: custom (not official)
Knox lock 0x0
Knox warranty void 0x0
EDIT: After doing the ODIN fail - it is stuck in ODIN mode and says "firmware upgrade encountered an issue. Please select recory mode in Kies & try again."
Can not enter download mode. But still connects in ODIN
thanks!

Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?

kenny1991 said:
Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?
Click to expand...
Click to collapse
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood

firstsx said:
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood
Click to expand...
Click to collapse
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
I don't know. But flashing kitkat may tripe Knox i don't know atnt models. If you don't want to flash then return it.

kenny1991 said:
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
Click to expand...
Click to collapse
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1

firstsx said:
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware. http://www.sammobile.com/firmwares/3/?download=25106
You know how to flash?

kenny1991 said:
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware.
You know how to flash?
Click to expand...
Click to collapse
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
but when i run it, it fails and says this on my phone
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1

firstsx said:
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
Click to expand...
Click to collapse
hm. Still no recovery mode?
Past your Odin log so someone can see why it fails.

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Need pit file?

kenny1991 said:
Need pit file?
Click to expand...
Click to collapse
sammobile doesn't say anything about pit file?
i only used the AP file from there
i have HLTE__USA_ATT_32G_pit file even when i use that PIT file with the AP file it still gives me the same fail error...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

firstsx said:
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T

toastido said:
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T
Click to expand...
Click to collapse
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit

firstsx said:
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps

Markudsc said:
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Click to expand...
Click to collapse
can i use this method
http://forum.xda-developers.com/showthread.php?t=2559715
it seems pretty much the same, except yours includes updating to kitkat.
if i do kitkat, can i still keep root?
will this trip knox?

Ok i did this method
http://forum.xda-developers.com/showthread.php?t=2559715
i re-downloaded all the files because the files i had just wouldn't work in ODIN or anything. so based your advice i just downloaded new files.
ODIN flash was successful
then i did the rest of the steps successfully! and i am back!

[Q] Help, Odin stuck at system.img.ext4

Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.

elSpade said:
Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.
Click to expand...
Click to collapse
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)

Journyman16 said:
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)
Click to expand...
Click to collapse
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck

elSpade said:
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
...
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck
Click to expand...
Click to collapse
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.

Journyman16 said:
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.
Click to expand...
Click to collapse
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours

elSpade said:
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours
Click to expand...
Click to collapse
While you wait, search Q&A for 'boot loop odin' and have a read...

Odin Failing at system.img in I9500

Hello all,
Odin failing at system.img while flashing stock rom. Please help
Phone: Galaxy S4 I9500 INS
Trying to flash: Stock Rom I9500XXUHOF3_I9500ODDHOF1_INS
Odin Version: 3.10.7
Log:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> system.img
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Hi,
Try with different cables, PCs, or put files in BL. And make sure you're not on Chinese Pit.
Sent from my GT-I9500

krasCGQ said:
Hi,
Try with different cables, PCs, or put files in BL. And make sure you're not on Chinese Pit.
Sent from my GT-I9500
Click to expand...
Click to collapse
Already tried mentioned method. Except Chinese pit. How to check that? And i think Chinese pit change can be issue because this happened after i flashed the first Chinese lollipop rom when it was officially launch for Chinese.
Can you guide me through this and help me?
Thank u so much.

Get an International pit arround XDA or use SamFirm with "Binary Nature" checked and flash it along firmware with Odin.
If you use SamFirm method, you'll have 4 files (Pit is inside CSC tar.md5). Put these 4 files on Odin and tick Re-partition.
Sent from my GT-I9500

krasCGQ said:
Get an International pit arround XDA or use SamFirm with "Binary Nature" checked and flash it along firmware with Odin.
If you use SamFirm method, you'll have 4 files (Pit is inside CSC tar.md5). Put these 4 files on Odin and tick Re-partition.
Sent from my GT-I9500
Click to expand...
Click to collapse
Thanks. You helped me alot and it worked. I flashed the stock firmware along pit file (adonis.pit).:good:
But now facing new problem. My phone is slow and random hangs and go into deep sleep and only option to come out of it is reboot.
So y this is happening? Is adonis.pit international version? or do i need to find other pit file?
Please help.

manish.200588 said:
Thanks. You helped me alot and it worked. I flashed the stock firmware along pit file (adonis.pit).:good:
But now facing new problem. My phone is slow and random hangs and go into deep sleep and only option to come out of it is reboot.
So y this is happening? Is adonis.pit international version? or do i need to find other pit file?
Please help.
Click to expand...
Click to collapse
Try to flash firmware (without Pit) several times and do factory reset then.
Sent from my GT-I9500

krasCGQ said:
Try to flash firmware (without Pit) several times and do factory reset then.
Sent from my GT-I9500
Click to expand...
Click to collapse
Hi. I tried every thing. But still the deep sleep, random hangs and slow working of phone continues on lolipop rom.
This all started when i tried to flash some miui rom and i not able to flash as i think it was not for my i9500. After that i again flashed aurora v4.0 but started facing deep sleep, and slow working issue. Then i tried flashing ozcan kitkat rom and the again all become normal.
So basically my phone is not working good at lolipop rom (earlier it worked great) and works good in kk rom (ozcan).
So can you suggest what can be done? or how could i locate the problem and rectified it.

I don't have any idea for this.
I loved CM-based ROM and I would stay on it as long as it doesn't have any major bugs.
For MIUI by gtbluesky, use CWM. Or you can remove 'assert' word on first paragraph until 'abort{This is for ja3g...}' on updater-script file.
Sent from my GT-I9500

There is No PIT Partition

Hey!
I kinda screwed up, horribly.
I initially had a Verizon S7 Edge, but I was on T-Mobile service so I decided to follow this guide: http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145 and it worked! Then I thought, maybe if I flash the T-Mobile firmware, it would work even better, and it did! Then recently I decided that I wanted to go back to unlocked firmware, so I tried flashing it again. Thats when everything went to ****. It failed, and said something about "sw rev check fail fused 3 binary 2", and so I tried again and it failed. I rebooted thinking that maybe the old os would be intact but it booted to recovery mode saying that it couldn't mount any of the partitions. So I tried to reflash the T-Mobile firmware again and now its giving an error about how there is no PIT partition. From googling online, I think I need to flash a .pit file or something. I could only find PIT files for the international unlocked s7 edge. Does anyone have the PIT files for the AT&T/Verizon/Unlocked S7 Edge (preferred, because I can then flash the U firmware), or even the T-Mobile PIT file?
Any help would be greatly appreciated.
Thanks.
EDIT: I rebooted the device and it took me to recovery and complained about not being able to mount /cache and /system. I fixed the /cache issue by using the "wipe cache partition" option, but now it is saying "dm-verity verification failed. E: failed to mount /system (Invalid argument)"

I tried flashing a PIT/ROM combo for tmobile that I found online but now im getting this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please help!
EDIT: It gave that same weird binary thing.

Pit file zipped on the original csc.zip... Unpack csc zip, and copy pit...

DenyDeBeyle said:
Pit file zipped on the original csc.zip... Unpack csc zip, and copy pit...
Click to expand...
Click to collapse
Thank you, but I just figured out how to solve the issue. I found the latest firmware from TMOBILE and flashed that. Apparently I had updated my phone so the bootloader was version 3 instead of version 2 or something and you can downgrade. Im not sure if thats the right explanation, but my phone works now, so thats good.
Thank you.

Download G935 U 4files firmware (qualcomm edition, no verison-tmobile-sprint-att bloatware).
My g935a phone is g935u firmware, and work perfectly.

DenyDeBeyle said:
Download G935 U 4files firmware (qualcomm edition, no verison-tmobile-sprint-att bloatware).
My g935a phone is g935u firmware, and work perfectly.
Click to expand...
Click to collapse
I have already tried that and failed. I think the TMOBILE bootloader is more updated or something and so you cant flash to a previous version of the bootloader. IDK, maybe someone can explain it better?

Nahtnam, do you solve that problem, just now I have exactly the same

emavas said:
Nahtnam, do you solve that problem, just now I have exactly the same
Click to expand...
Click to collapse
The issue was that I was I was on bootloader version 4, and I tried to flash a firmware with bootloader version 3. I ended up finding the firmware with bootloader version 4 and flashed that.

hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
---------- Post added at 11:43 AM ---------- Previous post was at 11:41 AM ----------
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone