Database Users

[Q] Help, wont boot after bad flash

Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated

Bananmos said:
Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated
Click to expand...
Click to collapse
did you tried flashing stock fw with pit file?

samersh72 said:
did you tried flashing stock fw with pit file?
Click to expand...
Click to collapse
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.

Bananmos said:
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.
Click to expand...
Click to collapse
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file

samersh72 said:
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file
Click to expand...
Click to collapse
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.

Bananmos said:
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.
Click to expand...
Click to collapse
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition

samersh72 said:
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition
Click to expand...
Click to collapse
Ohh ok, I select them both at the same time in Odin?

Bananmos said:
Ohh ok, I select them both at the same time in Odin?
Click to expand...
Click to collapse
yes.
did it succeed when flashed fw alone in pda first?

samersh72 said:
yes.
did it succeed when flashed fw alone in pda first?
Click to expand...
Click to collapse
The download isnt finished yet, its very slow. I will try just the fw first and let you know. If that dosent work ill try it with the pit file.

if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:

samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok thank you very much. Will tell you what happens

samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok, first I tried without the pit file and its says in Odin that it failed. In the messages windows it says:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!
I then tried with the pit file and fw but it faild aswell. In the message window it said
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
Is there something else I can try? Is it possible that this could be something wrong with the hardware?

Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium

Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app

Bananmos said:
Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Same result
Sent from my Galaxy Nexus using xda premium

samersh72 said:
Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!

Bananmos said:
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!
Click to expand...
Click to collapse
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium

samersh72 said:
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Hi , i really like you are HELPING us !!!! :good: Good guy :angel:
Thanks from all of us .

Note 3 is "not supported" by Kies 3

EDIT: At this point, I'm just trying to flash official firmware via ODIN but every attempt is ending with ODIN: Invalid ext4 image on various firmwares and via various USB ports
Hi everyone,
I recently picked up a Galaxy Note 3 which I soon realized was a parallel import and so I decided to flash firmware from my country with Odin. It failed (I soon realized I had forgotten to enable USB debugging) and my phone currently displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I have tried reinstalling Kies, different USB ports (USB 2.0 & 3.0) after turning off USB 3.0 charging too, reseating the battery etc but each time, Kies tells me "The connected device is not supported by Kies 3. Check which devices are supported and try again." except Kies 3 is what the Note 3 uses...
Reinstalling the driver as well doesn't appear to do anything either. The Note 3 shows up in device manager as SAMSUNG Mobile USB Modem so it's detected but I can't exactly say if that is correct?
Anyway, any help is appreciated! I'll see when Samsung's contact centre is open next being Christmas and all and since I was only flashing official firmware, my Knox counter is still at 0x0 so my warranty is still in place should the need to use it arise.

If you flash with odin then why do you need kies for? Just put it in download mode and flash it again.
Sent from Note 3 SM-N9005

ione2380 said:
If you flash with odin then why do you need kies for? Just put it in download mode and flash it again.
Sent from Note 3 SM-N9005
Click to expand...
Click to collapse
Flashing with ODIN has been stopping on "Invalid ext4 image" every time but I'm downloading another ROM to try out at the moment. Hopefully that should work. I was trying to avoid ODIN since I wasn't sure if repeatedly try to flash a ROM (even official firmware) and having it fail would make things worse.

Having the same problem
Sentryism said:
Flashing with ODIN has been stopping on "Invalid ext4 image" every time but I'm downloading another ROM to try out at the moment. Hopefully that should work. I was trying to avoid ODIN since I wasn't sure if repeatedly try to flash a ROM (even official firmware) and having it fail would make things worse.
Click to expand...
Click to collapse
What's the solution? Do you already could find the problem?

bgantenbein said:
What's the solution? Do you already could find the problem?
Click to expand...
Click to collapse
Well, I don't have one yet. I'm still going through various firmwares but the second one I've tried threw up the same error. Basically, I'm just waiting for firmwares to download at the moment. I'll report back if I manage to fix it. I would assume it's due to not having debugging mode enabled but I can't exactly enable it in my current situation.
Here is the ODIN log if it is of any use:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005OXADMJ4_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sbl1.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> aboot.mbn
<ID:0/009> rpm.mbn
<ID:0/009> tz.mbn
<ID:0/009> sdi.mbn
<ID:0/009> NON-HLOS.bin
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> system.img.ext4
<ID:0/009> FAIL! (Ext4)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Well, I've gone through about 5 or 6 various ROMs and each fail at system.img.ext4 so I'm at a loss as to if I can even flash back to stock. I plan on contacting Samsung Support since my Knox counter is safely at 0x0 and I've run out of relevant posts to read that I have found.

Sentryism said:
Well, I've gone through about 5 or 6 various ROMs and each fail at system.img.ext4 so I'm at a loss as to if I can even flash back to stock. I plan on contacting Samsung Support since my Knox counter is safely at 0x0 and I've run out of relevant posts to read that I have found.
Click to expand...
Click to collapse
It seems that you might have a severe case of bad blocks on the eMMC (internal flash) - that in itself should be enough reason for a warranty replacement.
If you can not do a warranty replacement you should look (inside Odin) into erasing all NAND and repartitioning (there are some posts around with similar info, read a few of those until you understand what you are doing before starting to do anything on that direction).

Hello!
I made the switch from iOS to Android a couple of days ago and as well own a Note 3 device. After a couple of days of reading around the forums I decided to flash the MK2 Uk rom since in my country we're only up to MJ7 and I've been experiencing very weird battery drains. I am aware that the update won't likely fix them and I'll have to wait for the next one in January but I hope to at least make things better. Unfortunately today I downloaded Kies3 and I'm getting the same error when I click on the firmware check or upgrade menu (or whatever it is called). I haven't tried Odin yet because the firmware was taking too long to download and I had tl go out for work. Still I very doubt it will work since the official program isn't even working.
tl;dr; Please post in the topic when you find a solution as I am experiencing the same problem as well. Especially if I have to do a warranty replace since I have a wiggly button and I was wondering whether to do that in the first place.

Possible not a genuine Note 3?

This is absurd, I said I am new to Android, this doesn't mean I have grown in a pot. My device came with all the appropriate stickers, branding and everything and is purchased through a local carrier. Unfortunately I got one from Vietnam with the wiggly home button but it is a legit device. Anyways I even tried contacting my local support but they were most unhelpful, only forwarded me to an Authorized Service Provider (what an awful chat app, they disconnected me and I even lost the details). I think I will soon try flashing a custom firmware through CWM or something..

Sentryism said:
...
I recently picked up a Galaxy Note 3 which I soon realized was a parallel import and so I decided to flash firmware from my country with Odin. It failed (I soon realized I had forgotten to enable USB debugging) and my phone currently displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
...
Click to expand...
Click to collapse
I believe KIES 3 in Emergency Firmware Recovery mode does NOT YET support the updated bootloaders - so if your device has a bootloader >= MJ3 it will not be seen in KIES 3. I am still using Kies v3.1 but I have seen a v3.2 available, however I do not know if the problem is solved.

Sentryism said:
Well, I've gone through about 5 or 6 various ROMs and each fail at system.img.ext4 so I'm at a loss as to if I can even flash back to stock. I plan on contacting Samsung Support since my Knox counter is safely at 0x0 and I've run out of relevant posts to read that I have found.
Click to expand...
Click to collapse
Hi
Just had exactly the same problem as yours, and odin continuously failed just after 'hidden img'. Tried several roms to no avail. Phone was already rooted before the issue, and knox flag was already 0x1. I decided to flash cwm recovery (via odin) from here:
http://forum.xda-developers.com/showthread.php?t=2454079
The note 3 (SM-N9005) booted all the way surprisingly but with some issues (back button not working/Samsung keyboard stopping). I can now flash rom zip.
Tip: As your Knox flag is 0x0, try flashing stock recovery via odin.

Flashed Rom zip. Note 3 back to health.

shayind4 said:
Flashed Rom zip. Note 3 back to health.
Click to expand...
Click to collapse
Which ROM worked? I'm having a trying old time finding one that installs AND boots.
TIA for any help you can offer.
Cheers,
R2

shayind4 said:
Flashed Rom zip. Note 3 back to health.
Click to expand...
Click to collapse
R2D2_NZ said:
Which ROM worked? I'm having a trying old time finding one that installs AND boots.
TIA for any help you can offer.
Cheers,
R2
Click to expand...
Click to collapse
\given the fact it was a Zip file he flashed, it would a CWM flashable ROM that worked

R2D2_NZ said:
Which ROM worked? I'm having a trying old time finding one that installs AND boots.
TIA for any help you can offer.
Cheers,
R2
Click to expand...
Click to collapse
Hi
I flashed Djembey's deodexed pre-rooted jb 4.3 SM-N9005 XXUDMJ7 superslim rom (cwm) from here (second post):
http://forum.xda-developers.com/showthread.php?t=2461929
I used CWM recovery. After flashing the superslim rom, I was able to flash stock rom via odin.
Shayind4
---------- Post added at 02:09 PM ---------- Previous post was at 02:07 PM ----------
androidlover287 said:
\given the fact it was a Zip file he flashed, it would a CWM flashable ROM that worked
Click to expand...
Click to collapse
You are right.

If you tried to flash a firmware from another country than the original one, it might be that the partition size is not correct. You probably need to flash a pit file that is matching the partition size of the new firmware. Try to search for one that is matching to one of the firmware you downloaded and flash it with the new firmware ( tick repartition in Odin - this will erase your data !!!).
This is just a proposal and I do not know it it will work, but I got that hint from a thread in a German forum about changing from EU version to DBT firmware.

Im having a similar issue, except my note3 is the exynos (sm-n900), kies3 says my phone is not supported and odin fails at flashing my phone, it shows this
<ID:0/026> Added!!
<ID:0/026> Removed!!
<ID:0/027> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUCML1_N900OZSCML1_N900ZSUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/027> Odin v.3 engine (ID:27)..
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping..
<ID:0/027> Firmware update start..
<ID:0/027> modem.bin
<ID:0/027> NAND Write Start!!
<ID:0/027> sboot.bin
<ID:0/027> boot.img
<ID:0/027> cache.img
<ID:0/027>
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea on what else to do, any help please?

I've got the system.img.ext4 issue as well. Knox is still 0x0 and I was only trying to flash (Odin) a ROM from Sammobile - MI7, same level as the original but XSA instead of TGY. Bloody annoying.
Anyone got the Aussie Samsung support number?

I resolved my issue by DL'ing and flashing the TGY ROM - got an MI7 version so I should be still OK for RDLV. Apparently flashing with the ROM from another country is a problem - Odin passed teh XSA one without an issue, so I don't think it was a corrupt DL. I did see a reference in my searching to perhaps the partitions are different sizes in different CSC's or something.
So, now to enjoy my Note for a few days before rooting...

Fixed - I9505 - kernel is not seandroid enforcing - Reboot & Hangs ! Easy !

S4 I9505
Problem:
Start up screen top left corner shows:
kernel is not seandroid enforcing
Hangs up or Reboots.
I updated my S4 to Version: I9505XXUEMKE
Then I used Odin to Flash a Root with Stock recovery & SU, something went WRONG!
Knox is now 0x1, which should not have happened, but what can I say.
BaM, I got the Reboots & Hang ups.
But, I still could get into Recovery & Download Mode!
SO HERE IS THE FIX:
1. Download, Odin 3 - THx 2 - daerragh
--- I used Ver.: Odin 3.07
2. Download, http://www.sammobile.com/firmwares/2/
--- Register
--- And download your Firmware, if you know which you had before it crashed choose that one otherwise Upgrade to latest.
--- For me it was the latest version - I9505XXUEMKE ---- THx 2 -- Repulsa for the tip.
3. Start Odin 3.07 --- [Should it "FAIL" Read note at the Bottom #6].
--- Make sure - Auto Reboot & F. Reset Time are checked - Nothing else.
--- Click on PDA choose your Firmware file in my case "I9505XXUEMKE"
--- this can take a minute or two, WAIT, the PDA will check mark itself.
4. To start Turn off your phone completely ! Now hold following buttons to get into Download Mode,
--- Volume Down
--- Home
--- and last Power
--- S4 will enter into DL Mode
Seeing you have already tried to root you phone, you should have you Samsung USB drivers.
5. Press Start
--- This will take time, after it Reboot itself,
--- remove the USB Cabel & wait
--- at least 5 minutes don't remember how long, I came back after 5 Minutes and it was done,
---------- so then if everything went well for you, have fun :good: .
6. FAIL
--- Should it Fail while uploading to your phone,
--- A. Remove Battery
--- B. Remove USB cabel
--- C. Restart.
--- Should it Fail again (which happend to me), then Do A. B. C. again.
--- and this time Touch your screen about every minute.
I Know that sounds weird, but it worked for me maybe something to do with "Stand by? no clue".
If this has help you in anyway please hit that :good: Thanks Bottun
I AM NOT RESPONSIBLE for anything happening to your phone as a result of you flashing this Rom.

[Help Please] TMO-S4- Kernel is not seandroid enforcing
Hello,
Let me start off by saying, I'm a complete newbie when it comes to rooting (Infact - It took me a few days to even convince myself to do this) and I did look around for several guilds on how to remove this error (Downloaded Odin - Got Stock TAR.MD5) But I still get this error on my phone when I start the phone, it wouldn't be much of a probelm, except it hangs for a while and then restarts.) It also gets stuck for a long time at the T-Mobile load screen. The Wifi Wont turn on their... Please Help.
Galaxy S4: SGH-M919
T-Mobile...

I'm not an expert in Android OS but I think this is not an error. It is more of a notification that the STOCK KERNEL has been change to a CUSTOM one.

eclpsues said:
I'm not an expert in Android OS but I think this is not an error. It is more of a notification that the STOCK KERNEL has been change to a CUSTOM one.
Click to expand...
Click to collapse
You are right :highfive:

Hi guys
A friend and I tried to update my rooted Samsung S4 i9505 to the official kitkat version. Had the unofficial one before. Unfortunatly we didn't turn on the usb debugging and there wasn't enough space on my memory card. After removing the data from the sd card it still didn't work (usb debuging?). My friend then tried to install a custom rom of some sort (I'm the noob here. He has some skills). No whenever I try to start my cell up the message KERNAL IS NOT SEANDROID ENFORCING pops up in the top left corner. Can I turn on the usb debugging from the pc? What should I do?
Thanks

illias9 said:
Hi guys
A friend and I tried to update my rooted Samsung S4 i9505 to the official kitkat version. Had the unofficial one before. Unfortunatly we didn't turn on the usb debugging and there wasn't enough space on my memory card. After removing the data from the sd card it still didn't work (usb debuging?). My friend then tried to install a custom rom of some sort (I'm the noob here. He has some skills). No whenever I try to start my cell up the message KERNAL IS NOT SEANDROID ENFORCING pops up in the top left corner. Can I turn on the usb debugging from the pc? What should I do?
Thanks
Click to expand...
Click to collapse
I tried to install the Gummy Rom but I got the same problem. It gets stuck in the rebooting or something. It wont pass the samsung start screen. What should I do?

Tried all of the above and no go.
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my device is error message
start [224,1440]
sw rev check fail fused 4 binary 3.
I also have the "kernel is not seandroid enforcing" message.
When i restart my device i get an error message "Firmware upgrade encountered an issue please select recovery mode in kies and try again"
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?

Natza09 said:
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my device is error message
start [224,1440]
sw rev check fail fused 4 binary 3.
I also have the "kernel is not seandroid enforcing" message.
When i restart my device i get an error message "Firmware upgrade encountered an issue please select recovery mode in kies and try again"
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?
Click to expand...
Click to collapse
Use a different usb port. Always use the ports on the back of your pc not the ones on the front.

Lennyz1988 said:
Use a different usb port. Always use the ports on the back of your pc not the ones on the front.
Click to expand...
Click to collapse
Thanks Lennyz for the reply, I tried the back usb 2.0 and 3.0 and both failed with the same error message as originally posted. Can i just restore the kernel some how and will that fix the issue?

Natza09 said:
Thanks Lennyz for the reply, I tried the back usb 2.0 and 3.0 and both failed with the same error message as originally posted. Can i just restore the kernel some how and will that fix the issue?
Click to expand...
Click to collapse
I think I know what you did. You try to flash an older stock firmware on to your device. Pick a newer firmware because downgrading is not possible.

Lennyz1988 said:
I think I know what you did. You try to flash an older stock firmware on to your device. Pick a newer firmware because downgrading is not possible.
Click to expand...
Click to collapse
I have tried to flash several Roms that are 4.4 and that are compatible with my device using clock work mod and it doesn't work as i keep getting a Status 7 error which i have found a possible fix for here in the forum i will attempt to resolve and report back.
---------- Post added at 11:40 PM ---------- Previous post was at 11:05 PM ----------
Natza09 said:
I have tried to flash several Roms that are 4.4 and that are compatible with my device using clock work mod and it doesn't work as i keep getting a Status 7 error which i have found a possible fix for here in the forum i will attempt to resolve and report back.
Click to expand...
Click to collapse
Ok so i put TWTP back on and i was able to install Goldeneye Rom 4.4.2, Which is working great. However when i reboot im still getting the Kernel is not seandroid enforcing message in red. As i can not restore to stock Rom as Australia XSA 4.4 isn't out yet is there any other way to get rid of this message. Thanks again.

did anyone tried this ??

Natza09 said:
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?
Click to expand...
Click to collapse
iuts coz you are trying to downgrade the aboot file which is associated with know security check .. u have to flash the same or upgrade

franny23dmt said:
iuts coz you are trying to downgrade the aboot file which is associated with know security check .. u have to flash the same or upgrade
Click to expand...
Click to collapse
Yeah its all sorted now as version 4.4.2 has been officially released as stock on my Samsung S4, So back to "factory" now and no more message. Off to ebay it goes and Hello HTC One M8 .

Hi,
I'll Install WizCyan custom Rom on My GT-I9505 by TWRP mode. Its not a Error its a Premission That are allow when we use other roms.
●Press Volume Up and Volume Down Key at same
time and Hold it. This methode is use to Force Start your Rom

[Q] Soft brick at&t note 3?

Hi
I have AT&T Note 3 , sim unlock from carrier, successful kingo root 0x0 Knox (startup splash screen says Custom Unlock)
So, I was hopped up on percocets because of my recent surgery and i decided i was in conscious enough mind to tackle getting AWS unlock. I wasn't.
I was reading about chainfire regionaway app, so i went to the app store and downloaded the first chainfire app that popped up - 3D. so now i am stuck in the note 3 splash screen. yes i know i should have read it more carefully, etc. but i just wasn't all there at the time. Please help me save this $500 brick!
I've been reading these methods:
http://www.droidviews.com/how-to-unbrick-att-galaxy-note-3-sm-n900a/
i can get the phone recognized in ODIN, but the secure check fail: cache occurs
http://forum.xda-developers.com/showthread.php?t=2567133
i can't download any of these files...
http://forum.xda-developers.com/showthread.php?t=2507403
tried this but didn't work.
i'm really not making any headway... any help would be much appreciated.
side note:
can i send this in for warranty? Since AT&T just release the kitkat update can i claim that i tried to update and it failed?
current binary: samsung official
system status: custom (not official)
Knox lock 0x0
Knox warranty void 0x0
EDIT: After doing the ODIN fail - it is stuck in ODIN mode and says "firmware upgrade encountered an issue. Please select recory mode in Kies & try again."
Can not enter download mode. But still connects in ODIN
thanks!

Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?

kenny1991 said:
Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?
Click to expand...
Click to collapse
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood

firstsx said:
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood
Click to expand...
Click to collapse
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
I don't know. But flashing kitkat may tripe Knox i don't know atnt models. If you don't want to flash then return it.

kenny1991 said:
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
Click to expand...
Click to collapse
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1

firstsx said:
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware. http://www.sammobile.com/firmwares/3/?download=25106
You know how to flash?

kenny1991 said:
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware.
You know how to flash?
Click to expand...
Click to collapse
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
but when i run it, it fails and says this on my phone
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1

firstsx said:
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
Click to expand...
Click to collapse
hm. Still no recovery mode?
Past your Odin log so someone can see why it fails.

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Need pit file?

kenny1991 said:
Need pit file?
Click to expand...
Click to collapse
sammobile doesn't say anything about pit file?
i only used the AP file from there
i have HLTE__USA_ATT_32G_pit file even when i use that PIT file with the AP file it still gives me the same fail error...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

firstsx said:
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T

toastido said:
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T
Click to expand...
Click to collapse
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit

firstsx said:
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps

Markudsc said:
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Click to expand...
Click to collapse
can i use this method
http://forum.xda-developers.com/showthread.php?t=2559715
it seems pretty much the same, except yours includes updating to kitkat.
if i do kitkat, can i still keep root?
will this trip knox?

Ok i did this method
http://forum.xda-developers.com/showthread.php?t=2559715
i re-downloaded all the files because the files i had just wouldn't work in ODIN or anything. so based your advice i just downloaded new files.
ODIN flash was successful
then i did the rest of the steps successfully! and i am back!

[Q] Help, Odin stuck at system.img.ext4

Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.

elSpade said:
Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.
Click to expand...
Click to collapse
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)

Journyman16 said:
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)
Click to expand...
Click to collapse
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck

elSpade said:
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
...
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck
Click to expand...
Click to collapse
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.

Journyman16 said:
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.
Click to expand...
Click to collapse
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours

elSpade said:
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours
Click to expand...
Click to collapse
While you wait, search Q&A for 'boot loop odin' and have a read...