Hi everyone,
I tried to install CWM on my SM-G7106 with Odin. Until yet, I can boot my phone : black screen, no actions of buttons.
However, my linux PC detects it as :
Code:
[email protected]****:~/$ lsusb
Bus 004 Device 006: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
...
Do you have any idea I could fix it ?
Download stock ROM and flash it via odin
praveensingh569 said:
Download stock ROM and flash it via odin
Click to expand...
Click to collapse
I've tried but Odin doesn't recognize the device...
halord said:
I've tried but Odin doesn't recognize the device...
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
praveensingh569 said:
Try this http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
Click to expand...
Click to collapse
I didn't understand well this thread... How can I flash the debrick image without Odin ?
I've read the second solution (which was to use AFT), but I have to buy the AFT box, which costs next to 100$... So, I can't do noting for my phone ?
Related
hi dear xda team samsung i9505 dead bot howto repair bot helpme
as far as i know if the phone won't charge or boot or go to recovery or download mode
only a jtag or changing the motherboard would help
QUALCOMM USB showing QDLOADER...!
yes connect phone usb cable showıng qualcom loader
up up up up ... .... .. ...
i9505 dead boot repair via usb
cruel_storm said:
yes connect phone usb cable showıng qualcom loader
Click to expand...
Click to collapse
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
Any update of the Boot repair, because i have one dead SGS 4 Active?
svetliol said:
Any update of the Boot repair, because i have one dead SGS 4 Active?
Click to expand...
Click to collapse
As far as i know, there is no same solution for sgs4 active yet. Hopefully will be released soon.
Sent from my GT-I9505 using Tapatalk 2
thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
svetliol said:
Any update of the Boot repair, because i have one dead SGS 4 Active?
Click to expand...
Click to collapse
where can i download correct pit ?
hi i9505 dead under flash help me
dead sg9505
thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
what about this problem
IronSnake39 said:
what about this problem
Click to expand...
Click to collapse
Just put phone into download mode and reflash fw with odin.
Sent from my Nexus 7 using Tapatalk 2
Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks
Try this http://d-h.st/Okx kdz flasher, launch windows enabler as admin, also launch kdz as admin.
I have the same problem i will try this and we will see...
---------- Post added at 01:54 PM ---------- Previous post was at 12:58 PM ----------
well... the phone displays the charging animation... and that's all, if i want to boot the phone i have a bootloop
i got this
e-53e said:
i got this
Click to expand...
Click to collapse
I this (attachment)
your phone is not detected maybe it' a driver error
I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit
fenomeno83 said:
I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit
Click to expand...
Click to collapse
i installed the drivers that all the tutorials are telling to download and it works
e-53e said:
i installed the drivers that all the tutorials are telling to download and it works
Click to expand...
Click to collapse
Can you link?
fenomeno83 said:
Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks
Click to expand...
Click to collapse
which firmware did you flash?
hi from italy
AXD96 said:
which firmware did you flash?
hi from italy
Click to expand...
Click to collapse
Homero 10k
Ciao!
i think that the B2CAppSetup.exe drivers works
fenomeno83 said:
Homero 10k
Ciao!
Click to expand...
Click to collapse
do you resolved?
AXD96 said:
do you resolved?
Click to expand...
Click to collapse
Tomorrow i'll try.
PS: i work in Milan
fenomeno83 said:
Tomorrow i'll try.
PS: i work in Milan
Click to expand...
Click to collapse
Hi, As much I have seen you are trying to flash your phone via KDZ, you can try to repair your drivers by going to devices and then update driver and it will find newest, and try to flash V20A by Homero because if you were on V20 syste (4.1.2) you can't simply flash V10k by Homero, hope I helped.
e-53e said:
i got this
Click to expand...
Click to collapse
I have the same problem
Model: LG Optimius L7 II P714
solved!
Emergency mode WITH BATTERY INSERTED (without battery, the drivers don't work) -->go in emergency in this manner: without cable inserted, press volumeUP and power, and when phone vibrate release keys
The problems of "error wparams 100..." was because 10k of homero.
I have flashed 10k original https://disk.yandex.com/public/?hash=7G/SaZRIBwInyyrUn9rmSP9o/+9CXAXmXHHf3EMuVFI=
and it works!
After i have installed cwm (just cwm) http://forum.xda-developers.com/showpost.php?p=38231332&postcount=2230
and i can install coocked roms now!!!
ps: i used this (UpTestEX-mod_hf-marwin-beta): http://forum.xda-developers.com/showpost.php?p=49358448&postcount=2 (flash in 3qgct, emergency)
I have recently purchased a new PC, installed all drivers and now can't flash anything (custom recovery or official firmware)
Any ideas what has gone wrong?
I will attach 2 pictures. 1 showing the first error (no pit partition) and the 2nd with the pit still not working.
Please help
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Joku1981 said:
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Click to expand...
Click to collapse
Yes I'm in download mode. Using Odin 3.09.
CyberTbag said:
Yes I'm in download mode. Using Odin 3.09.
Click to expand...
Click to collapse
try a different cable/port
Repulsa said:
try a different cable/port
Click to expand...
Click to collapse
Only have 1 cable and I've tried all the USB ports
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Is there any connecting/disconnecting beeps grom pc if you move the cable up and down a touch?.
theunderling said:
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Click to expand...
Click to collapse
Guess I'm gonna have to find a new cable :/
Oh well, cheers anyway
CyberTbag said:
Only have 1 cable and I've tried all the USB ports
Click to expand...
Click to collapse
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Repulsa said:
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Click to expand...
Click to collapse
Just had the same "no pit partition" error
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
New Folder said:
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
Click to expand...
Click to collapse
I don't have an option to restart to download mode. I'm using stock firmware.
I can confirm today that it was indeed my USB cable. I have borrowed my friends cable and it works just fine.
Cheers for all the help guys
hello people , I have a neo s3 and he stopped on the logo of Samsung ( why I was in a rom custom and clicked to format , so I also had a custon recovery then he stopped ) and is only trying to enter the recovery mode and still not working
already tried everything Odin and etc ..
he does not recognize in any PC with no driver
and also he just turn on with a charger conected
Can someone help me please!!!
PS: sorry for my bad english
how about download mode?
DerPuGNa said:
how about download mode?
Click to expand...
Click to collapse
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try connecting your phone when its in download and try with Odin, if it recognize your device than just flash stock rom.
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try a different version of Odin first. For me only 3.09 and upwards works.
Install Samsung kies 3 to make the phone recognizable by pc and try flashing stock firmware with odin 3.09
First of all, you should download the drivers and stock rom from Sammobile.
Found the drivers here: http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
(not sure if they work, go and ahead install them and boot to download mode, then see, if odin recognizes it)
Latest Odin download: http://odindownload.com/
If the drivers work and your device is connected to the computer(also boot into download mode) and odin recognizes it:
1) Choose bootloader, then search for your downloaded firmware.
2) Head to the options tab and tick "Nand Erase All", "Phone EFS Clear" and "Phone Bootloader Update".
3) Then hit start and wait it to finish.
It should delete everything on your phone, restore it like it came out of the box.
If the drivers don't work let me know, I'll search for other working ones.
My phone's model number is SM-G935F i got stuck on the booting screen where is says "samsung galaxy s7 edge" after flashing this rom called renovate (http://forum.xda-developers.com/s7-edge/development/17-03-26-renovate-edge-beta-1-sm-g935f-t3339149) i really need help asap!
Download samsung smart switch from samsung website. put the phone into download mode. connect it . Follow steps and click something named as emergency recovery/restore go watch a video
https://www.youtube.com/watch?v=9QhJngOuLQ4
Hold the power button, volume down and home, will take few seconds
Boot to TWRP and select Reboot - System
rebel021 said:
boot to twrp and select reboot - system
Click to expand...
Click to collapse
i did and still stuck :/
nour almsry said:
i did and still stuck :/
Click to expand...
Click to collapse
it wont boot into twrp. either you go through odin route or smart switch route. flashing twrp will get back you twrp. But I prefer start afresh.
Best choice will be use smart switch, then enable developer mode , then unlock boot loader, flash twrp and super user. After that flash a new rom.
sohojmanush said:
it wont boot into twrp. Either you go through odin route or smart switch route. Flashing twrp will get back you twrp. But i prefer start afresh.
Click to expand...
Click to collapse
okay will try the smart switch brb
sohojmanush said:
it wont boot into twrp. either you go through odin route or smart switch route. flashing twrp will get back you twrp. But I prefer start afresh.
Best choice will be use smart switch, then enable developer mode , then unlock boot loader, flash twrp and super user. After that flash a new rom.
Click to expand...
Click to collapse
my device dose not show on smart switch or odin there is something called gadget serial is blocking my device
nour almsry said:
my device dose not show on smart switch or odin there is something called gadget serial is blocking my device
Click to expand...
Click to collapse
serial number is in the box
nvm it was the drivers . trying the smart switch now
sohojmanush said:
serial number is in the box
Click to expand...
Click to collapse
it says unsupported device in smart switch. maby we should try the odin route what is that?
nour almsry said:
it says unsupported device in smart switch. maby we should try the odin route what is that?
Click to expand...
Click to collapse
odin route is much more complex. you need to have clear idea about your phone rom, firmware.. i will not be able to help you in that. Try to reboot your phone again into download mode. then re connect your phone again and after that enter the model number correctly. with the G too. it will ask you the serial number then. it will written as s/n :
watch the video link. that explained it nicely.
nour almsry said:
it says unsupported device in smart switch. maby we should try the odin route what is that?
Click to expand...
Click to collapse
Download your same devcie model and csc firmware on sammobile.com then download the latest odin version and flash the downloaded firmware through odin that's it.
You can find your firmawre build no under about device menu.
sohojmanush said:
odin route is much more complex. you need to have clear idea about your phone rom, firmware.. i will not be able to help you in that. Try to reboot your phone again into download mode. then re connect your phone again and after that enter the model number correctly. with the G too. it will ask you the serial number then. it will written as s/n :
Click to expand...
Click to collapse
i have some expert with odin i used to to flash roms and jailbreak many devices . and the serial number was a problem with my pc not being able to recognize my device but now it is fixed
nour almsry said:
i have some expert with odin i used to to flash roms and jailbreak many devices . and the serial number was a problem with my pc not being able to recognize my device but now it is fixed
Click to expand...
Click to collapse
let us know when its fixed
sa3d12 said:
Download your same devcie model and csc firmware on sammobile.com then download the latest odin version and flash the downloaded firmware through odin that's it.
You can find your firmawre build no under about device menu.
Click to expand...
Click to collapse
will try