[Q] i9505 dead bot helpme - Galaxy S 4 Q&A, Help & Troubleshooting

hi dear xda team samsung i9505 dead bot howto repair bot helpme

as far as i know if the phone won't charge or boot or go to recovery or download mode
only a jtag or changing the motherboard would help

QUALCOMM USB showing QDLOADER...!

yes connect phone usb cable showıng qualcom loader

up up up up ... .... .. ...

i9505 dead boot repair via usb
cruel_storm said:
yes connect phone usb cable showıng qualcom loader
Click to expand...
Click to collapse
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.

thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
Any update of the Boot repair, because i have one dead SGS 4 Active?

svetliol said:
Any update of the Boot repair, because i have one dead SGS 4 Active?
Click to expand...
Click to collapse
As far as i know, there is no same solution for sgs4 active yet. Hopefully will be released soon.
Sent from my GT-I9505 using Tapatalk 2

thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
svetliol said:
Any update of the Boot repair, because i have one dead SGS 4 Active?
Click to expand...
Click to collapse
where can i download correct pit ?

hi i9505 dead under flash help me

dead sg9505
thorenzz said:
If phone pc recognize phone as qualcom loader then u can repair dead boot via usb.......Just install correct drivers, download file in attachments... Run the file as admin, select correct comport, and click on "recover device". After successful recovery u need to flash phone via odin with stock rom including PIT file. If u flash it without PIT phone will be dead again. Good luck. Post result here.
Thanks to mr legia from RIFF BOX team.
Click to expand...
Click to collapse
what about this problem

IronSnake39 said:
what about this problem
Click to expand...
Click to collapse
Just put phone into download mode and reflash fw with odin.
Sent from my Nexus 7 using Tapatalk 2

Related

Urgent!! Help Please with Flashing

Hi guys i was just flashing my stock 4.2.2 rom for warranty purposes with odin, and the process has just failed half way, The usb made a sound as it got disconnected even though the phone was untouched. What do i do at this stage? is my phone bricked? i have attached below what happend in odin, can someone tell me what to do? i am stuck here and have not disconnected my device yet. Should i hit the start button again? please help me, thanks
kuljit55 said:
Hi guys i was just flashing my stock 4.2.2 rom for warranty purposes with odin, and the process has just failed half way, The usb made a sound as it got disconnected even though the phone was untouched. What do i do at this stage? is my phone bricked? i have attached below what happend in odin, can someone tell me what to do? i am stuck here and have not disconnected my device yet. Should i hit the start button again? please help me, thanks
Click to expand...
Click to collapse
- Install Odin 3.09 and update ur drivers: HERE
- Try to flash ur stock rom with other USB port
Joku1981 said:
Install Odin 3.09 and update ur drivers: HERE
*EDIT: I dont know if u know this but u cant come back to 4.2.2 if u are in 4.3
Click to expand...
Click to collapse
Hi mate, my phone is currently connected to laptop in download mode, and the blue bar is half way and not moving as odin failed. What do i do at this stage? could you please give me some instructions? like shall i disconnect the usb cable? do i restart phone? what am i actually suppose to do in this state? please help. thanks as i dont want the phone to brick. I am on 4.2.2 btw already.
kuljit55 said:
Hi mate, my phone is currently connected to laptop in download mode, and the blue bar is half way and not moving as odin failed. What do i do at this stage? could you please give me some instructions? like shall i disconnect the usb cable? do i restart phone? what am i actually suppose to do in this state? please help. thanks as i dont want the phone to brick. I am on 4.2.2 btw already.
Click to expand...
Click to collapse
Easy.
1. Take ur battery off now for 1 min
2. Put in it again
3. Go to DOWNLOAD MODE
4. Close Odin in ur computer
5. Install Odin 3.09 & open it
6. Try to flash the same firmware android 4.2.2 with other USB port
Joku1981 said:
Easy.
1. Take ur battery off now for 1 min
2. Put in it again
3. Go to DOWNLOAD MODE
4. Close Odin in ur computer
5. Install Odin 3.09 & open it
6. Try to flash the same firmware android 4.2.2 with other USB port
Click to expand...
Click to collapse
Thank you, will try and report back.
kuljit55 said:
Thank you, will try and report back.
Click to expand...
Click to collapse
Hello Sir, with odin 3.09, i cant see a PDA box, which one am i suppose to use?
Same thing happend to me try this as of #6
IT WILL WORK
follow the Steps
http://forum.xda-developers.com/showthread.php?t=2594483
kuljit55 said:
Hello Sir, with odin 3.09, i cant see a PDA box, which one am i suppose to use?
Click to expand...
Click to collapse
PDA is now AP
you cannot move to 4.2.2 after updating to 4.3.It will definitely fail
Sent from my GT-I9500 using XDA Premium 4 mobile app
Thankyou very much joku1981, following your steps done the job. Cheers
Sent from my GT-I9505 using xda premium

[Q] hellpp My Galaxy s4 9505 brick detected on pc qhsusb_dload( zeus flash device)

help my galagy s4 9505brick detected on pc qhsusb_dload mode
plase help me:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
how to fix My Galaxy s4:crying::crying::crying::crying::crying::crying:
Assistant maintenance system
Device in a computer
QHSUSB_DLOAD mode
:crying::crying::crying::crying:
how o fix plaseeeeeeeeeeeeeeeeeeeeeeeeeeeeee helllllpppppppppp
Geting ur phone to service center to repair :fingers-crossed:
plase help
rowad1985 said:
plase help
Click to expand...
Click to collapse
Give this a shot mate . Check the first post and scroll down at the bottom http://forum.xda-developers.com/showthread.php?t=2265477
Sent from Hell ?
Explain to me the way step by step
rowad1985 said:
Explain to me the way step by step
Click to expand...
Click to collapse
here http://forum.legija.net/showthread.php/69405-Boot-repair-Samsung-galaxy-S4-%28i9505-and-similar%29-via-USB-Cable
you must flash the attached file then flash i9505 firmware file with PIT file!
At odin if you flash the firmware with pit file you must tick re-partition
Bordo_Bereli51 said:
here http://forum.legija.net/showthread.php/69405-Boot-repair-Samsung-galaxy-S4-%28i9505-and-similar%29-via-USB-Cable
you must flash the attached file then flash i9505 firmware file with PIT file!
At odin if you flash the firmware with pit file you must tick re-partition
Click to expand...
Click to collapse
no working this methode
Not respond to phone
heeeeeeeeeeelp plase
I do not have RIFF Box
rowad1985 said:
no working this methode
Not respond to phone
heeeeeeeeeeelp plase
I do not have RIFF Box
Click to expand...
Click to collapse
then you need a experienced repairer if you dont know how to fix it
or go to warranty shop and repair it for fee.

[Problem]: i do "wipe system" And now my mobile does not work.

i do "wipe system" via recovery . and now I have Official recovery , becuse i install it by mistake
and my phone It does not connect to computer .
how i can fix it ? are there something like recovery (update.zip) to install it from official recovery ? or any thing please
sorry for my language bad .
Wrong thread
shohag2018 said:
Wrong thread
Click to expand...
Click to collapse
i'm sorry , but please help me !
iM7umd said:
i'm sorry , but please help me !
Click to expand...
Click to collapse
You'll want to use ODIN to restore your phone to normal. Your computer will not recognized your phone as a USB storage device, but ODIN should be able to see it.
You'll need to find the correct ODIN files for your phone type (Tmobile, Verizon, etc and the ROM combo). If you just go to "http://forum.xda-developers.com/galaxy-s5" you'll see different sections based on the service provider; the ODIN files will be in there somewhere.
Once you find the thread there will be accompanying instructions on what to do.
Donut42 said:
You'll want to use ODIN to restore your phone to normal. Your computer will not recognized your phone as a USB storage device, but ODIN should be able to see it.
You'll need to find the correct ODIN files for your phone type (Tmobile, Verizon, etc and the ROM combo). If you just go to "http://forum.xda-developers.com/galaxy-s5" you'll see different sections based on the service provider; the ODIN files will be in there somewhere.
Once you find the thread there will be accompanying instructions on what to do.
Click to expand...
Click to collapse
thank's for your reply .
I've experimented with many files ODIN. but any of them did not succeed !
and before this problem, No computer connects to mobile !
model phone : G-900F :crying:
download mode working? press all at the same time: vol down + menu + power button. then follow instruction (press vol up to confirm enter download mode).
once your phone on download mode then connect to PC. ODIN should recognize your phone n flash it. (i assume your PC has all driver installed and u have correct firmware for yr variant)
Don"t freak out.
iM7umd said:
thank's for your reply .
I've experimented with many files ODIN. but any of them did not succeed !
and before this problem, No computer connects to mobile !
model phone : G-900F :crying:
Click to expand...
Click to collapse
Mohammed this thread is probably going to be closed. because again its not where it should be. so PM me if this isn't clear .
i wipe system every time i try a new ROM. so dont panic okay
whatever the issue with RECOVERY it doesn't matter if the odin mode or download is still reachable.
if u having trouble with PC recognizing odin mode on your phone. try to make sure u have both samsung usb and google usb drivers.
( NOTE: if it still doesnt recognized it try another usb cable. )
http://developer.samsung.com/technical-doc/view.do?v=T000000117
http://developer.android.com/sdk/win-usb.html
and if it does launch ODIN 3.09 . and make sure that u have the right firmware for g-900f in good state not corrupted.
an-_-dro said:
download mode working? press all at the same time: vol down + menu + power button. then follow instruction (press vol up to confirm enter download mode).
once your phone on download mode then connect to PC. ODIN should recognize your phone n flash it. (i assume your PC has all driver installed and u have correct firmware for yr variant)
Click to expand...
Click to collapse
it's work ! but i can't connect the device to my computer. i try some device other, it's connect !
i have samsung drives .
dark3bod said:
Mohammed this thread is probably going to be closed. because again its not where it should be. so PM me if this isn't clear .
i wipe system every time i try a new ROM. so dont panic okay
whatever the issue with RECOVERY it doesn't matter if the odin mode or download is still reachable.
if u having trouble with PC recognizing odin mode on your phone. try to make sure u have both samsung usb and google usb drivers.
( NOTE: if it still doesnt recognized it try another usb cable. )
http://developer.samsung.com/technical-doc/view.do?v=T000000117
http://developer.android.com/sdk/win-usb.html
and if it does launch ODIN 3.09 . and make sure that u have the right firmware for g-900f in good state not corrupted.
Click to expand...
Click to collapse
i'm sorry for this , I did not know where I put this problem !
anyway , thank's for your reply . and i'll tell you what happened in detail.
please .. any kernel.zip work with official recovery ! .
i did replacement for charge port ! but it's don't work also ! ..
please any body help me ?
Hello ! anybody ..

Please help me , my s3 neo is "dead"

hello people , I have a neo s3 and he stopped on the logo of Samsung ( why I was in a rom custom and clicked to format , so I also had a custon recovery then he stopped ) and is only trying to enter the recovery mode and still not working
already tried everything Odin and etc ..
he does not recognize in any PC with no driver
and also he just turn on with a charger conected
Can someone help me please!!!
PS: sorry for my bad english
how about download mode?
DerPuGNa said:
how about download mode?
Click to expand...
Click to collapse
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try connecting your phone when its in download and try with Odin, if it recognize your device than just flash stock rom.
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try a different version of Odin first. For me only 3.09 and upwards works.
Install Samsung kies 3 to make the phone recognizable by pc and try flashing stock firmware with odin 3.09
First of all, you should download the drivers and stock rom from Sammobile.
Found the drivers here: http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
(not sure if they work, go and ahead install them and boot to download mode, then see, if odin recognizes it)
Latest Odin download: http://odindownload.com/
If the drivers work and your device is connected to the computer(also boot into download mode) and odin recognizes it:
1) Choose bootloader, then search for your downloaded firmware.
2) Head to the options tab and tick "Nand Erase All", "Phone EFS Clear" and "Phone Bootloader Update".
3) Then hit start and wait it to finish.
It should delete everything on your phone, restore it like it came out of the box.
If the drivers don't work let me know, I'll search for other working ones.

i cannot flash via odin my samsung s4 i9505

please help me expert how revive againt may samsung s4,,,i cannot flash any old rom or new rom ,,,
It's not flashing because the phone is not recognized by Odin as nothing is assigned under COM.
Do you have the samsung usb drivers for the phone installed?
lilnash16 said:
please help me expert how revive againt may samsung s4,,,i cannot flash any old rom or new rom ,,,
Click to expand...
Click to collapse
Only with the Pit file you can solve it .... find the appropriate Pit file for your device and flash it via Odin ..
Sent from my SM-G935F using Tapatalk
The pit file will not solve the problem if the phone is not recognized by Odin.
The key thing here is to get the computer to recognize the phone, as mentioned by @audit13. Change USB ports, use the stock cable, and ensure the Samsung drivers are installed. If you can get the computer to recognize the phone, flash the ROM using the BL slot, not the AP slot. That should resolve the issue on the device.

Categories

Resources