Database Users

HOW TO -- Reset Binary Conter to 0

hi @all
follow instruction to reset the binary counter:
before you start, you need a actually gnote rom and you need usb jig!! if you not have a jig, dont try this!!!! im not responsible if you brick your phone!!
1. download a sgs2 bootloader(search in sgs2 forum --> bootloader)
2. flash it over odin as pda
3. put the battery out
4. put the battery in and connect the usb jig
5. connect your phone with pc
6. flash the rom via odin as pda
7. when is done, disconnect the phone from pc and remove the jig
8. put the battery out and again in
9. connect your phone whit the pc over the normal usb connector, flashed rom will start with the update, phone reboot self ---> finish
dont ask me, dont look for support, im not developer, i only wrote down what i do and how i reset the counter to 0..
many thanks at bodivas, hi was the first one who try this, and i can confirm it, it works..

with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks

geek78 said:
with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks
Click to expand...
Click to collapse
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..

I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda Bootloader_GS2.tar
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Bootloader_N7000.tar..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
View attachment Bootloader_GS2.rar
Sbl.bin from Note:
View attachment Bootloader_N7000.rar
Unpack these files,before flashing ..

bodivas said:
I have already rebuilt procedure 3 times and all ok..
files for Odin:
Sbl.bin from SGS2:
http://www.multiupload.com/971QBMMTHX
Sbl.bin from Note:
http://www.multiupload.com/MQCAFDXURN
m_adnan,
add these files in your post..
Click to expand...
Click to collapse
yes, same for me

m_adnan said:
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..
Click to expand...
Click to collapse
The auction has ended. Can you show a current one?

The cheapest jig in the world

anonymous572 said:
The cheapest jig in the world
Click to expand...
Click to collapse
:O £1.03 delivered!
Thats ridiculous! Ive ordered one!
I wonder where it's shipped from and how much that costs?!

How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Step 7 is confusing - it says to remove the jig, but the jig was not in, because we were connected to the computer for Odin ???

RashaMatt said:
How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Click to expand...
Click to collapse
Yes., and then you just restart the phone..Stop!!!

DealExtreme is not the cheapest, just the one with best prices/spread relationship.
I paid my jig 0.80€ shipped off a random chinese seller on ebay

did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?

hmmmmm
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.

chowdarygm said:
did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?
Click to expand...
Click to collapse
I tried and it didn't work for me, but I was not on JK4 to start (maybe that's required). Nothing bad happened though.

graemeg said:
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.
Click to expand...
Click to collapse
Yep, I ordered a jig yesterday but am coming to the same conclusion - I can live with my nice yellow triangle for now!

bodivas said:
I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda sbl.bin from sgs2
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Sbl.bin from GNote..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
Sbl.bin from Note:
Click to expand...
Click to collapse
Any chance you can upload these files again?

@arigosh: On Intratech thread you can find both the old and the new bootloader for S2
http://forum.xda-developers.com/showthread.php?t=1075278

I tried and posted the update on this Q&A before, it works on gNote and I have tried this twice.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=1514002&highlight=remove+triangle

arigosh said:
Any chance you can upload these files again?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19100010&postcount=4

You could flash a rooted ics build. Then run triangleaway. Then reflash gingerbread from cwm. Thats what i did. Now have 0 again and no triangle
Sent from my GT-N7000 using XDA

odin problem

Hi.. i have a custom rom and i want to return back to stock rom.. I open the Odin programm and it does not find my phone.... Can you help please??

install the samsung usb drivers and then switch off your phone. press vol down+home+power button at same time and then when phone logo shows up leave the buttons now a screen appears then press vol. up and then connect phone to computer while odin is on. make sure that kies is not running. select the appropriate package and flash your device.

MiltosTheRacer said:
Hi.. i have a custom rom and i want to return back to stock rom.. I open the Odin programm and it does not find my phone.... Can you help please??
Click to expand...
Click to collapse
Hey there! Before flashing STOCK ROM. Make sure you have a back-up first. (Just in case) Then, make sure the USB Debbugging Mode is enabled in your SGY. Install USB Drivers to your PC and the firmware package for your country/region. Then put your phone in download mode by pressing the combo buttons simultaneously. Power+VolumeDown+Home. Just follow the steps on how to unbrick sgy. Google it. I know you can
Press Thanks please if I helped you :good:
Sent from my Galaxy Y using neighbor's Wi-fi

TomalinSGY said:
Hey there! Before flashing STOCK ROM. Make sure you have a back-up first. (Just in case) Then, make sure the USB Debbugging Mode is enabled in your SGY. Install USB Drivers to your PC and the firmware package for your country/region. Then put your phone in download mode by pressing the combo buttons simultaneously. Power+VolumeDown+Home. Just follow the steps on how to unbrick sgy. Google it. I know you can
Press Thanks please if I helped you :good:
Sent from my Galaxy Y using neighbor's Wi-fi
Click to expand...
Click to collapse
Yes i try to do all this .. i mean i do all this but the Odin programm it still doesnt find my phone... The custom rom that i have is the Jellyblast 3.5 ..if it helps... And something else .. when i press the lockscreen and other settings in settings app ... the app stop working! Is there any help about this? Theank you.

MiltosTheRacer said:
Hi.. i have a custom rom and i want to return back to stock rom.. I open the Odin programm and it does not find my phone.... Can you help please??
Click to expand...
Click to collapse
1) install kies to your pc/lap...
2)now open odin......
Now just start your phone as usual...
Dont press any key.....
3) look at block in odin....
Aftet some time the block will become yellow....
4)once block become yellow, turn off your phone by long pressing power botton..........
5)then enter in odin mode......and install stock rom
I am sure this method works 100% ....
Sory for bad english.....
Sent from my GT-S5360 using xda premium

MiltosTheRacer said:
Hi.. i have a custom rom and i want to return back to stock rom.. I open the Odin programm and it does not find my phone.... Can you help please??
Click to expand...
Click to collapse
Try Odin 3.02 galaxy y Odin flasher
Sent from my GT-S5360 using xda app-developers app

MiltosTheRacer said:
Hi.. i have a custom rom and i want to return back to stock rom.. I open the Odin programm and it does not find my phone.... Can you help please??
Click to expand...
Click to collapse
Go to this site from dokhy73 and you get back your stock, if you follow the instruction well....
Sorry bad eng.
http://forum.xda-developers.com/showthread.php?t=1465800
Sent from my GT-S5360 using Tapatalk 2

[Q] Help please!

Hi all,
I have an I9505 from O2 and I was in Odin mid-flash throwing on Philz Touch when the cable got disconnected (kids) and now I'm getting an error on my phone I can't seem to undo. It's showing me a screen as soon as it begins to boot that reads "Firmware upgrade encountered an issue. Please select recovery modde in Kies and try again.". I've tried running Kies as it suggests and my computer doesn't even register the phone connecting to begin with let alone Kies noticing the connection. I've tried to go into recovery mode (vol up + power) but it just gives me the same message. Please tell me I didn't brick this thing... is there any voodoo I can do to fix this? Thanks for any help you can give.
-Izzy

d19375 said:
Hi all,
I have an I9505 from O2 and I was in Odin mid-flash throwing on Philz Touch when the cable got disconnected (kids) and now I'm getting an error on my phone I can't seem to undo. It's showing me a screen as soon as it begins to boot that reads "Firmware upgrade encountered an issue. Please select recovery modde in Kies and try again.". I've tried running Kies as it suggests and my computer doesn't even register the phone connecting to begin with let alone Kies noticing the connection. I've tried to go into recovery mode (vol up + power) but it just gives me the same message. Please tell me I didn't brick this thing... is there any voodoo I can do to fix this? Thanks for any help you can give.
-Izzy
Click to expand...
Click to collapse
pull out your battery for a minute, re-insert it, boot into download mode, reflash recovery

samersh72 said:
pull out your battery for a minute, re-insert it, boot into download mode, reflash recovery
Click to expand...
Click to collapse
I tried but no luck, the message comes up as soon as the phone receives power.

d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
you meant that you can not boot in odin mode?
if you can, what odin says when flashing?

d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
Can you still get in download mode? You may need to flash the whole firmware again then flash the recovery after. I've had the same problem on an s2 in the past with my son pulling the cable halfway through
Sent from my GT-I9505 using xda premium

Would a USB jig work?

You have to boot to download mode and install full firmware through Odin.
You can download your carriers firmware from Sammobile.com
Sent from my GT-I9505 using XDA Premium HD app

d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
Strike that, it worked! I've been at this for hours with no luck but I guess the phone gods are now in my favour. Unfortunately when I try to flash with Odin, I get failure messages and my phone stays in the Downloading part. Any advise?

d19375 said:
Strike that, it worked! I've been at this for hours with no luck but I guess the phone gods are now in my favour. Unfortunately when I try to flash with Odin, I get failure messages and my phone stays in the Downloading part. Any advise?
Click to expand...
Click to collapse
Aslong as odin says fail or pass and you definitely do not have a progress bar on your phone after odin shows the result then you will be safe to unplug amd reboot the phone manually. If it passes on odin it usually reboots itself
Sent from my GT-I9505 using xda premium

Obagleyfreer said:
You have to boot to download mode and install full firmware through Odin.
You can download your carriers firmware from Sammobile.com
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Awesome thanks, I'll give it a shot. I'll post back with results!

Got it! Re-flashed the firmware and it's rock solid. Thanks for all the help, really appreciate it guys.
-Izzy

Can't flash anything via Odin i9505

I have recently purchased a new PC, installed all drivers and now can't flash anything (custom recovery or official firmware)
Any ideas what has gone wrong?
I will attach 2 pictures. 1 showing the first error (no pit partition) and the 2nd with the pit still not working.
Please help

Is your phone in DOWNLOAD MODE? What version of ODIN u used?

Joku1981 said:
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Click to expand...
Click to collapse
Yes I'm in download mode. Using Odin 3.09.

CyberTbag said:
Yes I'm in download mode. Using Odin 3.09.
Click to expand...
Click to collapse
try a different cable/port

Repulsa said:
try a different cable/port
Click to expand...
Click to collapse
Only have 1 cable and I've tried all the USB ports

I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Is there any connecting/disconnecting beeps grom pc if you move the cable up and down a touch?.

theunderling said:
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Click to expand...
Click to collapse
Guess I'm gonna have to find a new cable :/
Oh well, cheers anyway

CyberTbag said:
Only have 1 cable and I've tried all the USB ports
Click to expand...
Click to collapse
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port

Repulsa said:
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Click to expand...
Click to collapse
Just had the same "no pit partition" error

Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.

New Folder said:
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
Click to expand...
Click to collapse
I don't have an option to restart to download mode. I'm using stock firmware.

I can confirm today that it was indeed my USB cable. I have borrowed my friends cable and it works just fine.
Cheers for all the help guys

S4 i9500 Hard bricked help me out

Last Monday I decided to get back to stock ROM
So I download original firemare from Sam mobile and was ready to get back to stock from
Odin.
I connected my mobile to PC and started to flash from Odin.
It was almost going to finish my ppc got restart automatic.
Now my s4 is showing the message " SOFTWARE ENCOUNTER AN ISSUE PLEASE
SELETED RECOVERY MODE IN KIES"
Now I am stuck totally PC cannot dected my mobile Odin is not decting my mobile.
Odin only dected my mobile when I removed the battery.
But flashing firemare fails every time.
I am totally lost. What to do.
Please any1 help.

Hey Bro,
you could check out below thread,
http://forum.xda-developers.com/showthread.php?t=2454199&page=2
hope it works for you

vipul.patel240889 said:
Last Monday I decided to get back to stock ROM
So I download original firemare from Sam mobile and was ready to get back to stock from
Odin.
I connected my mobile to PC and started to flash from Odin.
It was almost going to finish my ppc got restart automatic.
Now my s4 is showing the message " SOFTWARE ENCOUNTER AN ISSUE PLEASE
SELETED RECOVERY MODE IN KIES"
Now I am stuck totally PC cannot dected my mobile Odin is not decting my mobile.
Odin only dected my mobile when I removed the battery.
But flashing firemare fails every time.
I am totally lost. What to do.
Please any1 help.
Click to expand...
Click to collapse
Not a hard brick you're just soft brick.
You need to try connect your phone proper again so it can communicate with kies
Sent from my LG-D955 using Tapatalk

Bud1907 said:
Hey Bro,
you could check out below thread,
http://forum.xda-developers.com/showthread.php?t=2454199&page=2
hope it works for you
Click to expand...
Click to collapse
i
Thanks as bro I help it out.
Asshole service center guys ask me for 9700 rs they are telling
Motherboard had gone