Hi to enter bootloader mode power the phone off then hold the up button on the dpad and press the power button untill the bootloader menu apears.
STOCK RECOVERY MODE
1. Hold POWER BUTTON and X button on keyboard
2. After logo popup release POWER BUTTON and keep hold just X button
3. Triangle with little android popup release X button
4. Press POWER BUTTON once
Popup screen : Android System Recovery <2e>
Android System Recovery Utility
Reboot system now
Apply SDcard update.zip
Wipe data/Factory reset
Wipe cache partition
BOOTLOADER MODE
Power device off hold and press the up button on the dpad and press the power button for 4 seconds and let go only of the power button you will then see the bootloader menu (see my debranding flashing guide)
whitch one is the dpad button?
sale-caly said:
whitch one is the dpad button?
Click to expand...
Click to collapse
The "OK" button on the keyboard.
Stock recovery mode
is stock recovery mode to debrand the phone? or something else?
also where do I get update.zip
Here is Cyanogenmod for Motorola Flipout!
nixonpjoshua said:
is stock recovery mode to debrand the phone? or something else?
also where do I get update.zip
Click to expand...
Click to collapse
Use this link for the update.zip:
http://forum.xda-developers.com/showthread.php?t=2209254
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
The key combinations are different for every bootloader.
If you are rooted and you installed custom recovery menu then you have JB bootloader and the key combination specified by you should work.
But if you are on stock firmware (with stock recovery menu) then you have KK bootloader and the key combination is different:
dorimanx said:
With the Kitkat update the process has changed:
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
Click to expand...
Click to collapse
Do the instructions you said, but don't release volume, just release power button at LG logo and then press it again right away.
Sent from my LG-VS980 using XDA, powered by appyet.com
ornobohornish said:
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
Click to expand...
Click to collapse
that happened with me also, so here is what helped me.
hold power button and volume up button instead of volume down.
this is my first time having problems rooting a phone following a guide here. The root itself passed on odin but now my phone is stuck constantly rebooting, what do i do from here? Its the tmobile version of the phone.
Berbz said:
this is my first time having problems rooting a phone following a guide here. The root itself passed on odin but now my phone is stuck constantly rebooting, what do i do from here? Its the tmobile version of the phone.
Click to expand...
Click to collapse
I dont know which method you used but you need to flash a custom kernel after the rom afair. Did you flash the one?
Press and hold volume down, home button and the power key until you get to the Download mode screen.
Press volume down to restart.
Immediately press and hold volume up, home button and power button.
You will see a message about "Installing system update..." which will then change to a Recovery Mode screen.
Use the volume keys to select the factory reset option.
Press power key to confirm that choice.
Once the wipe is complete, use the volume up/down keys to select "Reboot device now" and press the power key.
Does anyone have a working stock recovery for the XT1642. Everthing i find and flash gives an error (file not signed or corrupted) literally everything gives me this. I now get the "no command" error when i open the recovery from the bootloader. I'm looking for one cuz i just got the nougat update but i cant update with twrp or a broken "no command" recovery.
Can anyone help?
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
echo92 said:
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
Click to expand...
Click to collapse
To piggyback on this reply, it can take a little practice to press both buttons correctly and get this to work. Or maybe it's just me
echo92 said:
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
Click to expand...
Click to collapse
When I do this it just boots to system. Maybe I didn't press the volume button good enough??
LordIndigo said:
When I do this it just boots to system. Maybe I didn't press the volume button good enough??
Click to expand...
Click to collapse
It's possible, as Mistersteve posted and I concur, the key combo takes some time to get used to, also, I recall the top option when you get into recovery is 'reboot to system', so that might have been accidentally pressed. Thanks google....
All I can suggest is be a bit slow with the key presses, I think the key combo last time took about 5 seconds. It's fiddly, though hopefully you'll get there!
echo92 said:
It's possible, as Mistersteve posted and I concur, the key combo takes some time to get used to, also, I recall the top option when you get into recovery is 'reboot to system', so that might have been accidentally pressed. Thanks google....
All I can suggest is be a bit slow with the key presses, I think the key combo last time took about 5 seconds. It's fiddly, though hopefully you'll get there!
Click to expand...
Click to collapse
So I start with pressing down and then press the power button after 5 seconds, sorry I don't really get it
LordIndigo said:
So I start with pressing down and then press the power button after 5 seconds, sorry I don't really get it
Click to expand...
Click to collapse
Okay, starting from the top: (credit to the steps listed in the Motorola support document: https://motorola-global-portal.cust...prod_answer_detail/a_id/105537/p/30,6720,9390)
1) With your device powered off, hold both the power button and the volume down key until the device powers on, then release.
2)This will boot your device into the bootloader/fastboot mode. Use the volume keys to select Recovery. Press the power key to boot.
3)At the No command screen, hold the power key and then press, then release the volume up key, then release the power key. You should then be at the recovery menu screen. This step might take a few tries.
You may choose to skip steps 1 and 2 via adb, so whilst your device is powered on and booted, plug your device into your computer (checking that USB Debugging is enabled), and in the adb terminal execute the command 'adb reboot recovery'.
echo92 said:
Okay, starting from the top: (credit to the steps listed in the Motorola support document: https://motorola-global-portal.cust...rod_answer_detail/a_id/105537/p/30,6720,9390)
1) With your device powered off, hold both the power button and the volume down key until the device powers on, then release.
2)This will boot your device into the bootloader/fastboot mode. Use the volume keys to select Recovery. Press the power key to boot.
3)At the No command screen, hold the power key and then press, then release the volume up key, then release the power key. You should then be at the recovery menu screen. This step might take a few tries.
You may choose to skip steps 1 and 2 via adb, so whilst your device is powered on and booted, plug your device into your computer (checking that USB Debugging is enabled), and in the adb terminal execute the command 'adb reboot recovery'.
Click to expand...
Click to collapse
It did work, sadly the update failed anyway. I thought fixing the recovery would make the update work but no.
LordIndigo said:
It did work, sadly the update failed anyway. I thought fixing the recovery would make the update work but no.
Click to expand...
Click to collapse
What error did the update report?
echo92 said:
What error did the update report?
Click to expand...
Click to collapse
Just that it was unsuccessful
Hello there,
got the final android oreo update today on my TA-1021 (Germany).
Now i cant acces the recovery anymore!?!
At Android Nougat it was:
1. connect to charger
2. press and hold volume down and power button.
3. then release power button and keep pressing volume down.
4. now i'm into recovery
Now i stuck into dowload mode with this method.
Is there a way without using adb?
Thanks a lot.
Edit:
Did it now through adb.
Maybe there will be a solution in the future.
Einherjer* said:
Hello there,
got the final android oreo update today on my TA-1021 (Germany).
Now i cant acces the recovery anymore!?!
At Android Nougat it was:
1. connect to charger
2. press and hold volume down and power button.
3. then release power button and keep pressing volume down.
4. now i'm into recovery
Now i stuck into dowload mode with this method.
Is there a way without using adb?
Thanks a lot.
Edit:
Did it now through adb.
Maybe there will be a solution in the future.
Click to expand...
Click to collapse
Power off your device
Connect your device to charger
When you see battery charging animation
Press and hold volume up and power key together
Release power key only not volume up key when you see android logo
After few seconds you will be booted to recovery but wil no command user interface
Dont panic
Hit volume up+power key+home button(fingerprint senser) together for once
You will get the recovery
Tip: dont use any sideloaded into recovery, this will brick your device
Nokia doesn't support sideloaded process
Hit thanks button if you find this useful
Happy flashing
Thank you very very much!!! This method works perfectly!
Thank you! The method also works for me.
Thanks it worked for Nokia 6 TA-1033 !
sltushar said:
Power off your device
Connect your device to charger
When you see battery charging animation
Press and hold volume up and power key together
Release power key only not volume up key when you see android logo
After few seconds you will be booted to recovery but wil no command user interface
Dont panic
Hit volume up+power key+home button(fingerprint senser) together for once
You will get the recovery
Tip: dont use any sideloaded into recovery, this will brick your device
Nokia doesn't support sideloaded process
Hit thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
It doesn't work with Android 9.0 (Nokia TA-1033), can't get pass the no command interface. Any tips?
Gondvanaz said:
It doesn't work with Android 9.0 (Nokia TA-1033), can't get pass the no command interface. Any tips?
Click to expand...
Click to collapse
Gondvanaz said:
In no command interface hit repeatedly power + vol up or vol down together till u get the usual recovery menu options. I can't remember exactly power + vol up or power + vol down. one should work.
Click to expand...
Click to collapse