Hello there,
got the final android oreo update today on my TA-1021 (Germany).
Now i cant acces the recovery anymore!?!
At Android Nougat it was:
1. connect to charger
2. press and hold volume down and power button.
3. then release power button and keep pressing volume down.
4. now i'm into recovery
Now i stuck into dowload mode with this method.
Is there a way without using adb?
Thanks a lot.
Edit:
Did it now through adb.
Maybe there will be a solution in the future.
Einherjer* said:
Hello there,
got the final android oreo update today on my TA-1021 (Germany).
Now i cant acces the recovery anymore!?!
At Android Nougat it was:
1. connect to charger
2. press and hold volume down and power button.
3. then release power button and keep pressing volume down.
4. now i'm into recovery
Now i stuck into dowload mode with this method.
Is there a way without using adb?
Thanks a lot.
Edit:
Did it now through adb.
Maybe there will be a solution in the future.
Click to expand...
Click to collapse
Power off your device
Connect your device to charger
When you see battery charging animation
Press and hold volume up and power key together
Release power key only not volume up key when you see android logo
After few seconds you will be booted to recovery but wil no command user interface
Dont panic
Hit volume up+power key+home button(fingerprint senser) together for once
You will get the recovery
Tip: dont use any sideloaded into recovery, this will brick your device
Nokia doesn't support sideloaded process
Hit thanks button if you find this useful
Happy flashing
Thank you very very much!!! This method works perfectly!
Thank you! The method also works for me.
Thanks it worked for Nokia 6 TA-1033 !
sltushar said:
Power off your device
Connect your device to charger
When you see battery charging animation
Press and hold volume up and power key together
Release power key only not volume up key when you see android logo
After few seconds you will be booted to recovery but wil no command user interface
Dont panic
Hit volume up+power key+home button(fingerprint senser) together for once
You will get the recovery
Tip: dont use any sideloaded into recovery, this will brick your device
Nokia doesn't support sideloaded process
Hit thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
It doesn't work with Android 9.0 (Nokia TA-1033), can't get pass the no command interface. Any tips?
Gondvanaz said:
It doesn't work with Android 9.0 (Nokia TA-1033), can't get pass the no command interface. Any tips?
Click to expand...
Click to collapse
Gondvanaz said:
In no command interface hit repeatedly power + vol up or vol down together till u get the usual recovery menu options. I can't remember exactly power + vol up or power + vol down. one should work.
Click to expand...
Click to collapse
Related
To enter the bootloader: with the phone off hold volume down and press power. Use the volume rocker to scroll through the options
To enter Recovery: Once in the bootloader screen use the volume rocker to bring up the Recovery Mode option and press the power button. This gets you to the dead Andy with the red triangle. Now press volume up and you should have the stock Android recovery.
I'm guessing the bootloader is locked? :X
fury683 said:
I'm guessing the bootloader is locked? :X
Click to expand...
Click to collapse
goes without saying....
BladeRunner said:
To enter the bootloader: with the phone off hold volume down and press power. Use the volume rocker to scroll through the options
To enter Recovery: Once in the bootloader screen use the volume rocker to bring up the Recovery Mode option and press the power button. This gets you to the dead Andy with the red triangle. Now press volume up and you should have the stock Android recovery.
Click to expand...
Click to collapse
Once at dead Andy, I (at least) had to press power and vol up to get to stock recovery. Vol up alone did nothing.
josephpalozzi said:
Once at dead Andy, I (at least) had to press power and vol up to get to stock recovery. Vol up alone did nothing.
Click to expand...
Click to collapse
This has been happening to me too. Vol up and Andy just lays there, red triangle in hand, laughing at me.
EDIT: Nevermind............ I was missing the point. All good now.
Weird. I'm not able to get past the dead android.
I get into the bootloader fine, can select Recovery Mode, phone reboots and I get the dead Andy with "No command".
Tried pushing vol up... nothing. Tried pushing power and vol up... nothing.
I'm just trying to wipe the cache partition... which I've done before... but can't get past the dead guy.
ProfessorStein said:
Weird. I'm not able to get past the dead android.
I get into the bootloader fine, can select Recovery Mode, phone reboots and I get the dead Andy with "No command".
Tried pushing vol up... nothing. Tried pushing power and vol up... nothing.
I'm just trying to wipe the cache partition... which I've done before... but can't get past the dead guy.
Click to expand...
Click to collapse
in the dead andy screen press vol up + power for 4 seconds. if nothing happens try again, is a little tricky.
I have found that mine seems to work better if I hold the vol up for a second BEFORE I press power. Hold vol for a second then continue to hold it while you push power and let both go. Hope this helps someone.
Thanks guys, I'm in.
Man... that's a fine line between holding the buttons long enough to get into recovery, and holding them too long so as to shut your phone off!
X_man, that trick of holding vol up first before pressing power did actually seem to make it easier.
ProfessorStein said:
Thanks guys, I'm in.
Man... that's a fine line between holding the buttons long enough to get into recovery, and holding them too long so as to shut your phone off!
X_man, that trick of holding vol up first before pressing power did actually seem to make it easier.
Click to expand...
Click to collapse
No prob. Glad to help. I myself actually restarted a couple times by accident before I figured out you can hold the vol first. lol
You should only need to tap power while holding the volume Up button.
1. At the bootloader screen, select Recovery mode.
2. Wait for the dead Andy.
3. Press and hold volume Up.
4. Tap power and release (still pressing volume Up).
5. Recovery should show in a second or less.
€DIT: deleted, here was crap
Correction!
Moondroid said:
You should only need to tap power while holding the volume Up button.
1. At the bootloader screen, select Recovery mode.
2. Wait for the dead Andy.
3. Press and hold volume Up.
4. Tap power and release (still pressing volume Up).
5. Recovery should show in a second or less.
Click to expand...
Click to collapse
@Moondroid, I tried what you suggested many times, but to no avail. Finally I figured out that you had steps 3 and 4 in the wrong order! So for anyone that's still trying to figure this out, press and hold power button, then tap volume up button and release .
kheta1 said:
@Moondroid, I tried what you suggested many times, but to no avail. Finally I figured out that you had steps 3 and 4 in the wrong order! So for anyone that's still trying to figure this out, press and hold power button, then tap volume up button and release .
Click to expand...
Click to collapse
Thanks bro you made my life easy.
1. At the Bootloader screen, select Recovery mode.
2. Wait for the dead Andy.
3. Press and hold Power Key (atleast for 01 SEC).
4. Tap Volume Up and release (still pressing Power Key).
5. Recovery should show in a 01 milli second or less.
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
The key combinations are different for every bootloader.
If you are rooted and you installed custom recovery menu then you have JB bootloader and the key combination specified by you should work.
But if you are on stock firmware (with stock recovery menu) then you have KK bootloader and the key combination is different:
dorimanx said:
With the Kitkat update the process has changed:
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
Click to expand...
Click to collapse
Do the instructions you said, but don't release volume, just release power button at LG logo and then press it again right away.
Sent from my LG-VS980 using XDA, powered by appyet.com
ornobohornish said:
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
Click to expand...
Click to collapse
that happened with me also, so here is what helped me.
hold power button and volume up button instead of volume down.
Mobile phone shutdown, you can enter the Fastboot , eRecovery, Recovery & Upgrade these modes:
Need to connect the computer:
Fastboot mode: long press the volume down key + power button.
eRecovery mode: long press the volume up key + power button.
Do not need to connect the computer:
Recovery mode: long press the volume up key + power button.
Upgrade mode: long press the volume up key + volume down key + power button.
When the phone is in these modes, long press the power button can restart the phone to exit the mode.
Did I help you? A ''thanks :good:'' would be highly appreciated
Problem in entering recover mode
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Alaa.Hussien said:
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Click to expand...
Click to collapse
Same here. What to do?
Alaa.Hussien said:
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Click to expand...
Click to collapse
As soon as the Huawei logo appears release the power key and continue to hold the volume up key until recovery loads. That seems to work for me. Make sure you press the 2 keys at the same time to start.
Do you have stock recovery? or TWRP? and is you phone rooted?
IF you have a rooted phone you can install 'Flashify' or 'TWRP Manager' or 'ROM Toolbox' to boot direct to recovery while phone is on.
Finefeather said:
As soon as the Huawei logo appears release the power key and continue to hold the volume up key until recovery loads. That seems to work for me. Make sure you press the 2 keys at the same time to start.
Do you have stock recovery? or TWRP? and is you phone rooted?
IF you have a rooted phone you can install 'Flashify' or 'TWRP Manager' or 'ROM Toolbox' to boot direct to recovery while phone is on.
Click to expand...
Click to collapse
With the volume up, it says:
"Your device has been unlocked and can't be trusted....."
Your device is booting now...
And then nothing.
Can't boot. Can only access fastboot.
Reflash your recovery in fastboot.
Does anyone have a working stock recovery for the XT1642. Everthing i find and flash gives an error (file not signed or corrupted) literally everything gives me this. I now get the "no command" error when i open the recovery from the bootloader. I'm looking for one cuz i just got the nougat update but i cant update with twrp or a broken "no command" recovery.
Can anyone help?
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
echo92 said:
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
Click to expand...
Click to collapse
To piggyback on this reply, it can take a little practice to press both buttons correctly and get this to work. Or maybe it's just me
echo92 said:
As long as your recovery flashes with OKAY at the end of your command, the recovery should be flashed. Reboot into recovery to ensure it's not overwritten.
With the no command in recovery, press the power button, and whilst holding the power button also press the volume up button, then release the volume up button and then the power button. After a few seconds of pressing that combination, you should enter the recovery options with 'Apply update via SD card', 'wipe cache' and other menu items.
Hopefully you'll be able to install your update - in the event you get an error 7, you may have to re-flash Marshmallow or flash the fastboot Nougat ROM. Good luck either way
Click to expand...
Click to collapse
When I do this it just boots to system. Maybe I didn't press the volume button good enough??
LordIndigo said:
When I do this it just boots to system. Maybe I didn't press the volume button good enough??
Click to expand...
Click to collapse
It's possible, as Mistersteve posted and I concur, the key combo takes some time to get used to, also, I recall the top option when you get into recovery is 'reboot to system', so that might have been accidentally pressed. Thanks google....
All I can suggest is be a bit slow with the key presses, I think the key combo last time took about 5 seconds. It's fiddly, though hopefully you'll get there!
echo92 said:
It's possible, as Mistersteve posted and I concur, the key combo takes some time to get used to, also, I recall the top option when you get into recovery is 'reboot to system', so that might have been accidentally pressed. Thanks google....
All I can suggest is be a bit slow with the key presses, I think the key combo last time took about 5 seconds. It's fiddly, though hopefully you'll get there!
Click to expand...
Click to collapse
So I start with pressing down and then press the power button after 5 seconds, sorry I don't really get it
LordIndigo said:
So I start with pressing down and then press the power button after 5 seconds, sorry I don't really get it
Click to expand...
Click to collapse
Okay, starting from the top: (credit to the steps listed in the Motorola support document: https://motorola-global-portal.cust...prod_answer_detail/a_id/105537/p/30,6720,9390)
1) With your device powered off, hold both the power button and the volume down key until the device powers on, then release.
2)This will boot your device into the bootloader/fastboot mode. Use the volume keys to select Recovery. Press the power key to boot.
3)At the No command screen, hold the power key and then press, then release the volume up key, then release the power key. You should then be at the recovery menu screen. This step might take a few tries.
You may choose to skip steps 1 and 2 via adb, so whilst your device is powered on and booted, plug your device into your computer (checking that USB Debugging is enabled), and in the adb terminal execute the command 'adb reboot recovery'.
echo92 said:
Okay, starting from the top: (credit to the steps listed in the Motorola support document: https://motorola-global-portal.cust...rod_answer_detail/a_id/105537/p/30,6720,9390)
1) With your device powered off, hold both the power button and the volume down key until the device powers on, then release.
2)This will boot your device into the bootloader/fastboot mode. Use the volume keys to select Recovery. Press the power key to boot.
3)At the No command screen, hold the power key and then press, then release the volume up key, then release the power key. You should then be at the recovery menu screen. This step might take a few tries.
You may choose to skip steps 1 and 2 via adb, so whilst your device is powered on and booted, plug your device into your computer (checking that USB Debugging is enabled), and in the adb terminal execute the command 'adb reboot recovery'.
Click to expand...
Click to collapse
It did work, sadly the update failed anyway. I thought fixing the recovery would make the update work but no.
LordIndigo said:
It did work, sadly the update failed anyway. I thought fixing the recovery would make the update work but no.
Click to expand...
Click to collapse
What error did the update report?
echo92 said:
What error did the update report?
Click to expand...
Click to collapse
Just that it was unsuccessful
Hi all
Phone has been a laggy mess since updating to 8.1.0 so am trying to wipe cache partition in recovery. Managed to get into it once on previous update but cannot get into it now. Have got as far as powering up with Charing cable plugged in and holding power button, volume + and home button and getting to the dead android with 'No Command'. Have tried different solutions to get to recovery from here such as:
pushing vol +
Pushing vol + and power
Pushing vol +, home and power
Nothing works. Am I missing something? Honestly this phone has been a constant let down from the word go and this is starting to get to me.
Cheers
When "No command" appear,Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu,you should made it,its easy.
Marius.Petran said:
When "No command" appear,Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu,you should made it,its easy.
Click to expand...
Click to collapse
Thanks for the reply. Tried it and nothing. How long to hold them together before releasing vol up button?
Thanks
[EDIT] Got into it finally, can't have been holding the button combo long enough. Thanks @Marius.Petran