Database Users

[GUIDE] Fix a bootloop on a rooted Zenfone 2

Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:

i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!

Worked! Thanks!
Thank you so much! :good:
It worked for me. Although I had to clear cache and dalvik cache before installing the zip, otherwise my phone would reboot into fastboot when trying to flash the zip.
And best of all: I didn't loose any data!! Just had to root again using method 3 and install busybox.
I edited my build.prop because on the Amazon App Store there is an app (Navigon Europe) that can't be installed because Amazon says my device would be incompatible which it isn't because the Play Store says it's fine. Anyway, upon rebooting I was stuck at the splash screen. Luckily I was still able to get into fastboot...
Thanks again!

Still doesnt boot up
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance

pozum said:
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance
Click to expand...
Click to collapse
Tried other usb ports and cables? do you have all necessary drivers?

ElmirBuljubasic said:
Tried other usb ports and cables? do you have all necessary drivers?
Click to expand...
Click to collapse
yes and yes, different ports, different cables, 2 different computers - nothing... thanks

Same problem
I'm having the exact same issue as Pozum. ADB won't detect device. It won't boot. Is it completely bricked or can I do something?

try flashing full rom from SD card, rename it so that it can be recognized.
Sent from my ASUS_Z00AD using Tapatalk

luisoman2000 said:
try flashing full rom from SD card, rename it so that it can be recognized.
Click to expand...
Click to collapse
I have the stock android recovery utility. It doesn't give an option to flash/install anything. Or am I missing something?

Help
hello ...i recently rooted rooted my zenfone 2 and deleted the bloatware . I have and app call kingroot which i used to uninstall those apps ... this app also has a thing called Purify . i used it and it told me to restart and so i did . now the phone is stuck in bootloop . This is the 1st time I've restarted after rooting . Will your process work on mine ? Thanks in advance

I think yes, try it

Mael_RadecFR said:
Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
View attachment 3458839
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
View attachment 3458828
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
View attachment 3458829
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
View attachment 3458830
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
View attachment 3458840
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
View attachment 3458841
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:
Click to expand...
Click to collapse
Why in the **** did you link the french site to this?

This does not work because when the phone is bricked the SD card is not mountable.

Thanks the solution is jst perfect BUT AFTER UPDATE TOUCH PANEL DONT WORK

QA88 said:
Hello buddy,
I really need your help. I rooted my Asus with your method. But at that time you had not post CWM Recovery. Unfortunately, my nephew play with my Asus then he touch update OTA. Finally My device being stuck on Asus logo, while it doesn't have CWM Recovery.
Could you please give guidance
Click to expand...
Click to collapse
I brought you here, check on first post, hope it help. Good luck

Hi there, hope there's a chance of a reply !
So I've got the blinking Android robot with red explanation mark! and I'd just like to know how long it takes for the phone to reload after installation?
Its stuck on the Asus boot up screen with the loading symbol under it !

I did the same thng.
chetank08 said:
i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!
Click to expand...
Click to collapse
Hello. I believe I did the same exact thing . Did you by chance ever get back into Recover y mode or get the PC to recognize your phone. I'm a total novice with this, and very lost. Thank you.

Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1

i was hope ... but
Hi! there.
i spend last to days literelly trying to fix my zf2 ZE551ml, it gets frozen when i wipe cache so i force power off... what a mistake.
i was trying to fix it, and i got it worst. i think i erase recovery menu, so i can't adb sideload, fastboot saids that can not load image system.img, asus flash tool said "flash image failure (failed with error #1), xFSTK works to bring fastboot menu, but since i don't have the file to put on OS dns space, it didn't work, but, after hours and hours, in my last try of a long nigth, i did this guide.
when i see a cwm icon, i can't believe it!! almost made my entire two days, but suddenly, it was all sad, when i tried to install from external sd card it says that there is an error. And the problem still there. here is an option to install zip by sideload, but in de pc said not device detectec.
i really don't know what to do, i'm really tired, and my options are getting over...
any ideas??
Thank you all!!

maciek90 said:
Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1
Click to expand...
Click to collapse
Thank you for suggesting this guide! It did help me to get back into the recovery mode, however, after following the steps within the guide very diligently. I am still unable to get past the initial loading screen. . I received the permissions denied error just as the post suggested I would. I wiped the cache partition at the end of following the steps as suggested. Still. It will not load to the Welcome screen .

HELP!!! TO Unbrick lenovo a6000plus not a6000

i have already tried to unbrick my device through QFIL and Lenovo QcomDLoader but in both case the is stuck to a point (sahara)
i have downloaded A6000_S035_150507_8G_ROW and it is showing this problem...
it there any differnet way to unbrick Lenovo a6000 plus than a6000..
plz reply soon...

jhumpi said:
i have already tried to unbrick my device through QFIL and Lenovo QcomDLoader but in both case the is stuck to a point (sahara)
i have downloaded A6000_S035_150507_8G_ROW and it is showing this problem...
it there any differnet way to unbrick Lenovo a6000 plus than a6000..
plz reply soon...
Click to expand...
Click to collapse
Are you able to open fastboot mode..??
To enter in fastboot mode , you press VOL DOWN + POWER KEY for 4-5 seconds.
If a black screen with Lenovo logo in the middle and "Pressing power button for long can reboot" text in the end appears, that means your phone is just soft-bricked and can be recovered easily.
Otherwise, you need to flash the firmware using QFIL

sasukay said:
Are you able to open fastboot mode..??
To enter in fastboot mode , you press VOL DOWN + POWER KEY for 4-5 seconds.
If a black screen with Lenovo logo in the middle and "Pressing power button for long can reboot" text in the end appears, that means your phone is just soft-bricked and can be recovered easily.
Otherwise, you need to flash the firmware using QFIL
Click to expand...
Click to collapse
I have done that already but my phone don't goes into recovery mode;
then i tried Qfill but it alway shows downloading Sahara FAIL
i also tried from lenovo downloader.exe to unbrick but still same problem remain same...
is there any stock fimware for a6000 plus other than a6000

jhumpi said:
I have done that already but my phone don't goes into recovery mode;
then i tried Qfill but it alway shows downloading Sahara FAIL
i also tried from lenovo downloader.exe to unbrick but still same problem remain same...
is there any stock fimware for a6000 plus other than a6000
Click to expand...
Click to collapse
it all happens when i updated the miui rom through OTA update

jhumpi said:
I have done that already but my phone don't goes into recovery mode;
then i tried Qfill but it alway shows downloading Sahara FAIL
i also tried from lenovo downloader.exe to unbrick but still same problem remain same...
is there any stock fimware for a6000 plus other than a6000
Click to expand...
Click to collapse
Revovery and fastboot are two different things.
Press VOL DOWN + POWER KEY to go to fastboot

sasukay said:
Revovery and fastboot are two different things.
Press VOL DOWN + POWER KEY to go to fastboot
Click to expand...
Click to collapse
hi i am the same person
sryy but the phone neither goes into recovery nor into fastboot mode
just help in one thing
while i was trying to unbrick it through qfill the process faills every time on a step named as sahara..
and same thing happened in lenovo downloader.
pls visit to see img:--h t t p s://drive.google.com/file/d/0B3pnpEWh7mhESy0tVzc3NFBZWHc/view?usp=sharing
h t t p s://drive.google.com/file/d/0B3pnpEWh7mhEdFZLMmFHVHluTk0/view?usp=sharing

[email protected] said:
hi i am the same person
sryy but the phone neither goes into recovery nor into fastboot mode
just help in one thing
while i was trying to unbrick it through qfill the process faills every time on a step named as sahara..
and same thing happened in lenovo downloader.
pls visit to see img:--h t t p s://drive.google.com/file/d/0B3pnpEWh7mhESy0tVzc3NFBZWHc/view?usp=sharing
h t t p s://drive.google.com/file/d/0B3pnpEWh7mhEdFZLMmFHVHluTk0/view?usp=sharing
Click to expand...
Click to collapse
I have never hard bricked my device so I dont know how to use this method. But, I will search a tutorial for you.
And btw, why dont you go to the service center. I read some reviews of hard bricked Lenovo A6000 and people have got their devices repaired fron service center without any charges.
This guy solved hard brick problem himself, you can ask him
http://forum.xda-developers.com/member.php?u=7064781
You should follow this tutorial. Many people have successfully unbricked their devices through this
https://m.youtube.com/watch?v=7STVJtbWWfM

sasukay said:
I have never hard bricked my device so I dont know how to use this method. But, I will search a tutorial for you.
And btw, why dont you go to the service center. I read some reviews of hard bricked Lenovo A6000 and people have got their devices repaired fron service center without any charges.
This guy solved hard brick problem himself, you can ask him
http://forum.xda-developers.com/member.php?u=7064781
You should follow this tutorial. Many people have successfully unbricked their devices through this
https://m.youtube.com/watch?v=7STVJtbWWfM
Click to expand...
Click to collapse
I am not going to service center for two reason:
1.I want to repair my phone myself,and i would be just like to run away from problems, and if in future same thing happened again with me or some else than what ?
2. There is no near by Service center in my area...
if you somehow have any solution or related update plz help..

:fingers-crossed:
jhumpi said:
I am not going to service center for two reason:
1.I want to repair my phone myself,and i would be just like to run away from problems, and if in future same thing happened again with me or some else than what ?
2. There is no near by Service center in my area...
if you somehow have any solution or related update plz help..
Click to expand...
Click to collapse
You should ask help from this guy
http://forum.xda-developers.com/member.php?u=4976494
He made the youtube video of which I sent link of in the earlier post.
:good:

Could you plz Help Me...
jhumpi said:
i have already tried to unbrick my device through QFIL and Lenovo QcomDLoader but in both case the is stuck to a point (sahara)
i have downloaded A6000_S035_150507_8G_ROW and it is showing this problem...
it there any differnet way to unbrick Lenovo a6000 plus than a6000..
plz reply soon...
Click to expand...
Click to collapse
Could you plz Help Me... to unbrick my lenovo A6000 Plus...
It all happened when i Updated a ported MIUI rom from my phone..
My Phone is soft bricked ..It vibrates.. at different intervals...
I have tried almost all ways to unbrick my phone but still the condition is same.
1st i tried Qfills and 2nd the lenovo downloader, but in both case the process is stopping on a particular point "Sahara".I was using A6000_S035_150507_8G_ROW firmware.
I have some Confusion :
1. Is there should be different Firmware for lenovo a6000 plus than a6000's firmware.
2.USB debugging is necessary to unbrick a phone.Without it How we can unbrick my phone..
PLz help it is not a phone for me it teacher from which i study and without it i am facing many problem.plz help..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[email protected] said:
Could you plz Help Me... to unbrick my lenovo A6000 Plus...
It all happened when i Updated a ported MIUI rom from my phone..
My Phone is soft bricked ..It vibrates.. at different intervals...
I have tried almost all ways to unbrick my phone but still the condition is same.
1st i tried Qfills and 2nd the lenovo downloader, but in both case the process is stopping on a particular point "Sahara".I was using A6000_S035_150507_8G_ROW firmware.
I have some Confusion :
1. Is there should be different Firmware for lenovo a6000 plus than a6000's firmware.
2.USB debugging is necessary to unbrick a phone.Without it How we can unbrick my phone..
PLz help it is not a phone for me it teacher from which i study and without it i am facing many problem.plz help..
Click to expand...
Click to collapse
1) You can use A6000's firmware image on plus version, that wont be a problem.
2) USB Debugging has got nothing to do with unbricking
You must be having problems with drivers. If you got drivers installed correctly, then this would surely work. Follow the video.

finally Its done...!!!
sasukay said:
:fingers-crossed:
You should ask help from this guy
http://forum.xda-developers.com/member.php?u=4976494
He made the youtube video of which I sent link of in the earlier post.
:good:
Click to expand...
Click to collapse
Thanks all for helping me ,specially sasukay
but the problem was totally different , the whole processs to unbrick the phone was right but the problem was in Qfill ,the old version didn't support some devices in which my phone was one but the New version Of Qfill Approx. of 50 MB should be installed ..which My big brother " JUGGADU" found... and finally my phone is unbricked.....
So plz don't loose your hope before you fail...
And keep trying... :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::good::good::good::good:

jhumpi said:
Thanks all for helping me ,specially sasukay
but the problem was totally different , the whole processs to unbrick the phone was right but the problem was in Qfill ,the old version didn't support some devices in which my phone was one but the New version Of Qfill Approx. of 50 MB should be installed ..which My big brother " JUGGADU" found... and finally my phone is unbricked.....
So plz don't loose your hope before you fail...
And keep trying... :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::good::good::good::good:
Click to expand...
Click to collapse
Good to Know, that you made out alive through this. God bless you.
:silly:
Thanks
Atleast, I know now what to do if I ever brick my device.
:fingers-crossed:

I can't able to open fastboot mode. What can I do? Please help me my phone is not responding (lenovo a6000)

[GUIDE] Repair your Idol 3

Hi Everyone
This is Guide how to repair your phone who was dead
My phone doesn't worked for 3 days so i get small trick and successfully repaired from dead
My phone was 5 times not worked like dead,Screen not Works ...only LED works,when i connect to pc usb device not recognized and nothing....
Explanation about my Problem:
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb
So we are starting the GUIDE:
1.First you need the drivers so you can get from this https://drive.google.com/folderview?id=0B1T7tp6tJ_3kX3p6SUxWb2NfWTQ&usp=sharing
2.After you installed the Drivers go to. Download mode if not goes try this... Press Volume UP and Volume DOWN and connect to usb to your pc
3.Go to device Manager to view the Port ,so the port can be "Android HS-USB QDLoader 9008 (COM3)"
4.Download the Panasonic Firmware Eluga and Extract (don't worry this is the same like idol 3 only name changed)https://docs.google.com/uc?id=0B01OmzpKE6vAVDhaSFN2aVFzaVU
5. After Extract you wil find EB-90S55EWLv1009.exe so run as administrator wait to load data
6.select 6045 and in the list down you can find your phone
7.and press the button "download"
8.So process starting ..indetifying your device you will get informations about imei..rooted or no .....
9.so automatically started to flashing the firmware (my it's go to 45 % and then i get error)
10.Don't worry press the button Reboot Device
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
12.So device successfully repaired from dead
If you want to go to CM or Stock for Idol 3
-i will write guide to unlock bootloader and flash TWRP recovery
-You must have Minimal Adb and Fastboot
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing " .powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-You successfully unlocked the bootloader one step more to flash the recovery
-Download the TWRP RECOVERY FROM THIS LINK:
https://www.androidfilehost.com/?fid=24421527759881858
-Then copy from when you downlaod and paste the recovery in C:\Program Files\Minimal ADB and Fastboot
-Press Shift in the directory and click Right on mouse and open command promt here
-Type fastboot -i 0x1bbb flash recovery twrp-3.0.0-1.img or fastboot -i 0x1bbb boot twrp-3.0.0-1.img (if you want to test before installation)
-so successfully installed recovery and flash CM Or whatever you want
[/SIZE][/COLOR][/B]
Sorry for Grammatical Errors!
This guide will repair from dead.... ​

in my case , buttons also doesn't work , how did you opened the back cover?

xZrender said:
in my case , buttons also doesn't work , how did you opened the back cover?
Click to expand...
Click to collapse
here's video how you can open
https://www.youtube.com/watch?v=FrFE8FdTXrY

Alek Dev said:
Hi Everyone
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb​
Click to expand...
Click to collapse
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/

xZrender said:
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/
Click to expand...
Click to collapse
Eject cable from motherboatd....insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb

problem with idol 3 4.7 6039K
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.

nipozzano said:
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.
Click to expand...
Click to collapse
Hello
This Guide only works with Idol 3 5.5
but i will explain how to restore your device
Can you try with Mobile upgrade Q to restore,if doesn't work
Use this guide from wiemar ,it should help to you because it's for your model
http://forum.xda-developers.com/showpost.php?p=63709274&postcount=113
If you any questions ask me

Hi ! I follow the guide up to the section 9, unfortunately, in the Panasonic Firmware Eluga and Extract after pressing download it stops after 2% and I have got the error message "load nprg error error code 5002". Does someone know how to fix that ?
Thanks !

Error
I get: "Master Clear: FAIL Flash Status: [COM3->PC[3]] COM3->PC[3] failed to erase misc (Error code = 40016) " :crying:
Now I get the same error that matcail... did you solved it ???

Good tutorial but it does not help me. My phone keeps on rebooting.

Schumi_wk said:
Good tutorial but it does not help me. My phone keeps on rebooting.
Click to expand...
Click to collapse
Tell me info About your phone? Model,Country,ROM...../?

All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.

Schumi_wk said:
All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.
Click to expand...
Click to collapse
More Looks like Hardware Problem Try again with Mobile q if not works...Send to warranty repair.....

Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!

I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:

peito said:
I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:
Click to expand...
Click to collapse
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you

eXoSaX said:
Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!
Click to expand...
Click to collapse
Alek Dev said:
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you
Click to expand...
Click to collapse
That is exactly what I'm doing,entering in Download mode and then download in the Panasonic software,but nothing,the program cannot read my phone,I'm really tired of trying this,I will stuck in your Alek rom (btw,no matter how many times I flash your modem,I cannot get the lock screen ).Ty anyway Alek and keep it up!!!!

Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
Click to expand...
Click to collapse
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery

thorfr said:
Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery
Click to expand...
Click to collapse
Looks Like Problem With Motherboard and Battery ..you can try again with Panasonic Firmware Tool and if this not help Send it to Warranty Repair

ok i m gonna send it to warr:crying:antly
retry mobil q upgrage wo success bootloop again

Letv 1s RED LIGHT!! BRICKED!!!!! HELP!!!!! (SOLVED)

So i read many pages in many sited and came to know that my phone got bricked. And they actually solutions and i was trying em from days now and this is the results i get!!!
In SP TOOL i when i click download and then i plug in the cable and then my phone to the cable. it shows something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but then it connects it pops up this error:crying:
And after a few struggle holding the volume up button and again connecting the phone it finally starts but it always stops at 10sec(refer to image 3) and the port seems to change very time. and it keep on connecting and disconnecting... image 3
SO ANY SOMEONE IF YOU HAVE BEEN IN THIS POSITION. PLEASE HELP ME :fingers-crossed:

Solution
SOLUTION
After a long struggle of 4 to 5 days i got it solved.
i downloaded this sp tool which got some extra files like when u press Ctrl+Alt+S u get a 2 extra slots to select. And i have selected that slot called "AUTH" and selected that AUTH file which was in the sp tool folder only. And Then i flashed. But it still gave me error's. So i chose the framework(pure, stock, original rom) )for me it was 14s) and i flashed it BOOM!!!!
IT WORKED
So after the flash i found out that my phone ran out of juice and it was power off and thats why the flashed worked.But if ur phone still got juice u better lay it off for a day or two to let the phone ran out to juice!
IF U GOT IN THIS **** I'LL BE GLAD TO HELP Y'ALL...... PEACE..:angel:

M.Rohit Kumar said:
So i read many pages in many sited and came to know that my phone got bricked. And they actually solutions and i was trying em from days now and this is the results i get!!!
In SP TOOL i when i click download and then i plug in the cable and then my phone to the cable. it shows something like this
but then it connects it pops up this error:crying:
And after a few struggle holding the volume up button and again connecting the phone it finally starts but it always stops at 10sec(refer to image 3) and the port seems to change very time. and it keep on connecting and disconnecting... image 3
SO ANY SOMEONE IF YOU HAVE BEEN IN THIS POSITION. PLEASE HELP ME :fingers-crossed:
Click to expand...
Click to collapse
Which error were you getting like 2004 or 2005 in sp tool cause i was also having the problem flashing the ROM.
I am not able to see the images you had posted.

Yes it's 2004 and 2005. But I have recovered form the brick.. so you have the same problem like when you connect you phone to PC, screen black and only red led light It's connects and disconnect's in some seconds or minutes!. And I have posted the solution for it in my second post. I recommend you to read it. If you need any help. Just ask:good:

M.Rohit Kumar said:
Yes it's 2004 and 2005. But I have recovered form the brick.. so you have the same problem like when you connect you phone to PC, screen black and only red led light It's connects and disconnect's in some seconds or minutes!. And I have posted the solution for it in my second post. I recommend you to read it. If you need any help. Just ask:good:
Click to expand...
Click to collapse
Yeah bro, I was getting the error 2004 and i tried everything(except your suggestion) but unable to succeed. So i gave my phone to service center on September 7 and waiting to get it back till now(LOL).
BTW thanx for the walkthrough i will surely try this if something wrong happens to my phone:good:.

Hey man... I can still help you!! If you can just take your phone from the "service center"... They will ask extra money and kinds of things... I suggest you to bring back your phone so that I can help ya!:angel:

M.Rohit Kumar said:
Hey man... I can still help you!! If you can just take your phone from the "service center"... They will ask extra money and kinds of things... I suggest you to bring back your phone so that I can help ya!:angel:
Click to expand...
Click to collapse
Not possible. They had send it to company.

Ankit Singh said:
Not possible. They had send it to company.
Click to expand...
Click to collapse
Hmm OK... Good luck

Hi, i have the same problem, only that the phone connects to the PC if im holding volume up button and for a second or two... Where did you find that .auth file? I have 3 different sp flash tools and none of them have that file.
Thanks for your help

This is the sp tool i use and it contains the auth file too! And sorry of late reply... hope it help you too.. and dont get frustrated just keep on trying you will get there!!
https://drive.google.com/open?id=0B6N9p5E5vRISTndrZ3pLMG9pSFk

Help me
Bro I also have a se prblm yrr... Aaj have told above that alrdy I have done no rpson any other solution pls tellll gussa pass humble rqst yrrrrr

Have you tried using the sp tool with the auth file?

I have the phone bricked
M.Rohit Kumar said:
SOLUTION
After a long struggle of 4 to 5 days i got it solved.
i downloaded this sp tool which got some extra files like when u press Ctrl+Alt+S u get a 2 extra slots to select. And i have selected that slot called "AUTH" and selected that AUTH file which was in the sp tool folder only. And Then i flashed. But it still gave me error's. So i chose the framework(pure, stock, original rom) )for me it was 14s) and i flashed it BOOM!!!!
IT WORKED
So after the flash i found out that my phone ran out of juice and it was power off and thats why the flashed worked.But if ur phone still got juice u better lay it off for a day or two to let the phone ran out to juice!
IF U GOT IN THIS **** I'LL BE GLAD TO HELP Y'ALL...... PEACE..:angel:
Click to expand...
Click to collapse
I have the same problem like when you connect you phone to PC, screen black and only red led light It's connects and disconnect's in some seconds or minutes.
HOW I RESOLVE THIS? HEEEEEELP!

SP TOOL
Try using the SP TOOL .. LINK IN THE OTHER DESCRIPTION

M.Rohit Kumar said:
SOLUTION
After a long struggle of 4 to 5 days i got it solved.
i downloaded this sp tool which got some extra files like when u press Ctrl+Alt+S u get a 2 extra slots to select. And i have selected that slot called "AUTH" and selected that AUTH file which was in the sp tool folder only. And Then i flashed. But it still gave me error's. So i chose the framework(pure, stock, original rom) )for me it was 14s) and i flashed it BOOM!!!!
IT WORKED
So after the flash i found out that my phone ran out of juice and it was power off and thats why the flashed worked.But if ur phone still got juice u better lay it off for a day or two to let the phone ran out to juice!
IF U GOT IN THIS **** I'LL BE GLAD TO HELP Y'ALL...... PEACE..:angel:
Click to expand...
Click to collapse
bro i drained my full battery and tried to flash my phone still i get a message device not recognised.. help me.. what should i do now? my phone is bricked there is no OS inside get stucked on bootloop.. unable to recognised by pc.. help me please

This phone takes its own time , so dont give up it will work out one day. Mine took more than 10 days to wake up from its deep sleep.Good luck

Same problem bro....
M.Rohit Kumar said:
Yes it's 2004 and 2005. But I have recovered form the brick.. so you have the same problem like when you connect you phone to PC, screen black and only red led light It's connects and disconnect's in some seconds or minutes!. And I have posted the solution for it in my second post. I recommend you to read it. If you need any help. Just ask:good:
Click to expand...
Click to collapse
Bro please i need your help very bad......please guide me through this so called BRICK. I showed my phone to many local mobile repairers but no one can fix it. I found this post helpful but the only problem is that i cannot connect my phone to PC due to constant disconnections and connections i don't know why that is happening.
:crying: Bohot din ho gaye hai mera phone ese hi pada hai......UR MY LAST HOPE bro....even a little help would be appreciated a lot. Can we get in touch on whatsap or anything? :/

If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeEcoUnofficial
Thanks all of u

My phone not working showing green light continuously when I remove from charging also ,tried volume + power button going to recovery mode showing update systems and clear data ,I tried update system but showing failed to update,cause :installation package not found but I didn't try clear data because afraid of loosing all data pl advice

Plz help me my phone was bricked letv 1s I also installed the 14s rom and it was still dead plz help me

oneplus 6T stuck on fastboot bootloop

hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:

ritork said:
hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:
Click to expand...
Click to collapse
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/

Ethos001 said:
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/
Click to expand...
Click to collapse
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ritork said:
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
Click to expand...
Click to collapse
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:

Ethos001 said:
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:
Click to expand...
Click to collapse
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate

ritork said:
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate
Click to expand...
Click to collapse
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Thanks again mate <3

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?

HackerGames197 said:
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?
Click to expand...
Click to collapse
PM me

Gracie mille !!! First brick and i hope never again but you where there.. Huge thanks.

Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.

bigmikey307 said:
Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.
Click to expand...
Click to collapse
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.

Micheal86 said:
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Hope this helps

I have the same problem
PLeaseeee help me I have a rooted oneplus 6t. I performed a backup and wipe in hope to clear a problem and am now stuck in fastboot mode. Im pretty sure as I tried to reboot it said no os detected, and then I got stuck. I have tried to install the latest oxygen os by manualling flashing 4 files. all tutorials i read have bootloader and other files while i just have - system_matrix , system_manifest , vendor_matrix, vendor_menifest (XML files by the way). I have flashed these files and rebooted only to go back to the fastboot screen.

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing ?
And my bootloader is also locked how can i solve this problem pls help me

For anyone running into a similar problem these are the steps I used
1. Download and extract files
a. Qualcomm drivers
b. MSM Oneplus 6t download Tool
2. Disable Driver Signature Enforcement by restarting your pc whilst holding shift, Choose trouble shoot, then going into more recovery ,select Advanced Options > Startup Settings > and then click on Restart.
3. Now PC will restart and Now you will see a list of startup settings that you can change. Select option 7 ‘Disable Driver Signature Enforcement’ by clicking f7
4. Now switch off your phone (by navigating through fast boot options)
5. While switched off hold both vol up + down for 5secs before connecting to your pc. *Your pc should recognise a phone is connected however nothing will be displayed on your phone*
6. Open device manager from start- Under Other devices there should be your phone (although it will be called smthn else), right click that and select update drivers
7. Browse computer for driver software and select folder with extracted QUALCOMM drivers (for me it was called unbrick).
8. The open the MSM application (run as admin tho) it should say device connected
9. Press start and you download should start- if error occurs or download stops unplug, power on, power off and the plug it again, now it should be fine.
10. Wait for download to finish and then your phone should be rebooted
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
mohitgaba14 said:
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing
And my bootloader is also locked how can i solve this problem pls help me
Click to expand...
Click to collapse
Look at the post above