Database Users

[HOWTO] Unbrick Hardbricked (stuck onUSB Logo) MeMo Pad ME170CX (and others)

This guide will help you unbrick your hardbricked MeMo pad or possibly other device. For the purpose of this guide, hardbricked will refer to a device's software being damaged to the point where standard procedures and utilities (adb, fastboot, recovery, etc.) will not be able to make the device functional again. In order to be hardbricked, you essentially need to erase or damage the bootloader. Without the bootloader, you can't use fastboot or recovery since all of those things require the bootloader. This guide addresses that situation (your device should be displaying nothing but the USB logo, as seen in the attachment). If you have a working bootloader and can run fastboot commands, THIS GUIDE IS NOT FOR YOU and will only possibly make things worse.
This guide is directed towards the ME170CX, which is also apparently called the ME70C or KO1A; however, the same process should work for other MeMo Pad devices and even other Intel devices. I cannot provide much help for other devices, so try at your own risk.
Do not follow this guide unless it is your last hope or you know what you are doing. I am not responsible for any damage you cause to your device in any way.
We will use the Intel Phone Flash tool, which can be used with a variety of Intel devices to flash firmware. You can use the Manufacturing Flash Tool instead if you'd like.
Here are the steps:
Obtain and install all drivers and software from the bottom of this post.
Download the factory image zip from the manufacturer's website; make sure it matches your device before flashing!. Extract the contents of the zip. Extract the contents of ifwi.zip into the same folder.
Plug in the device and open the Phone Flash tool. In the Phone Flash Tool window, click on "Custom Flash" on the left and pick "system (blankphone)" from the Type dropdown.
For each of the first four files, pick the one that matches:
CLVp_CSAX_FWR_DnX_20.3E.bin for FW DnX
IFWI_v64.25_CSAX_PROD.bin for IFWI
CLVp_CSAX_OS_DnX_20.3E.bin for OS DnX
fastboot.img for OS Image (this doesn't seem right, but it worked for me)
Once the four images are in place, click "Register flash file". At this point, your device should be displayed in the white rectangle on the page and the start flash button should now be clickable. Press the button, and flashing will commence. If you see "Windriver Error: 0x20000015, Timeout expired" in the console, try rebooting the device and flashing before the USB logo comes up (the device will appear in the Flash Tool before the logo comes up).
After a few seconds, you should see the Intel splash screen and you will be taken to droidboot. From there, it should be fairly easy to recover the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you encounter any issues or corrections, please respond to this thread and let me know. Also, I was getting tons of driver errors (Windriver Error: 0x20000015, Timeout expired) the second time I tried to do this. The trick seems to be pressing the flash button before the USB logo appears.
I discovered most of this information from these two resources:
https://www.youtube.com/watch?v=jh89aiepcjQ
http://www.asus-zenfone.com/2014/11/how-to-unbrick-zenfone-5-and-zenfone-6_8.html
REQUIRED DRIVERS AND SOFTWARE
iSocUSB Driver
Intel USB Driver for Android Devices
Intel Phone Flash Tool

Hey @korockinout13!
1st of all, thanks for this, I have hard bricked my ME70cx and I needed a solution...
Unfortunately it is not working... I have followed your instructions but I keep getting the error "Windriver Error: 0x20000015, Timeout expired"
I have reinstalled the drivers (iSOC and Intel USB) but nothing changes, the same error keeps appearing.
You say "The trick seems to be pressing the flash button before the USB logo appears." BUT the start flash button is only clickable AFTER the USB logo appears
Any help shall be appreciated

Premie said:
Hey korockinout13!
1st of all, thanks for this, I have hard bricked my ME70cx and I needed a solution...
Unfortunately it is not working... I have followed your instructions but I keep getting the error "Windriver Error: 0x20000015, Timeout expired"
I have reinstalled the drivers (iSOC and Intel USB) but nothing changes, the same error keeps appearing.
You say "The trick seems to be pressing the flash button before the USB logo appears." BUT the start flash button is only clickable AFTER the USB logo appears
Any help shall be appreciated
Click to expand...
Click to collapse
I literally faught that error for a whole day. I tried 5 different computers, all had that issue. Usually my tablet would connect and disconnect once before the logo came up. Within that brief window, I was able to start the flash and it worked. I'm pretty sure that's what did it. If you aren't seeing this, turn up your PC's volume and listen for the USB sounds.
This whole thing is pretty annoying, but when it works, it works.

Thanks
I shall keep going at it until it works or I find another solution.

PLEASE help me!
korockinout13 said:
This guide will help you unbrick your hardbricked MeMo pad or possibly other device. For the purpose of this guide, hardbricked will refer to a device's software being damaged to the point where standard procedures and utilities (adb, fastboot, recovery, etc.) will not be able to make the device functional again. In order to be hardbricked, you essentially need to erase or damage the bootloader. Without the bootloader, you can't use fastboot or recovery since all of those things require the bootloader. This guide addresses that situation (your device should be displaying nothing but the USB logo, as seen in the attachment). If you have a working bootloader and can run fastboot commands, THIS GUIDE IS NOT FOR YOU and will only possibly make things worse.
This guide is directed towards the ME170CX, which is also apparently called the ME70C or KO1A; however, the same process should work for other MeMo Pad devices and even other Intel devices. I cannot provide much help for other devices, so try at your own risk.
Do not follow this guide unless it is your last hope or you know what you are doing. I am not responsible for any damage you cause to your device in any way.
We will use the Intel Phone Flash tool, which can be used with a variety of Intel devices to flash firmware. You can use the Manufacturing Flash Tool instead if you'd like.
Here are the steps:
Obtain and install all drivers and software from the bottom of this post.
Download the factory image zip from the manufacturer's website; make sure it matches your device before flashing!. Extract the contents of the zip. Extract the contents of ifwi.zip into the same folder.
Plug in the device and open the Phone Flash tool. In the Phone Flash Tool window, click on "Custom Flash" on the left and pick "system (blankphone)" from the Type dropdown.
For each of the first four files, pick the one that matches:
CLVp_CSAX_FWR_DnX_20.3E.bin for FW DnX
IFWI_v64.25_CSAX_PROD.bin for IFWI
CLVp_CSAX_OS_DnX_20.3E.bin for OS DnX
fastboot.img for OS Image (this doesn't seem right, but it worked for me)
Once the four images are in place, click "Register flash file". At this point, your device should be displayed in the white rectangle on the page and the start flash button should now be clickable. Press the button, and flashing will commence. If you see "Windriver Error: 0x20000015, Timeout expired" in the console, try rebooting the device and flashing before the USB logo comes up (the device will appear in the Flash Tool before the logo comes up).
After a few seconds, you should see the Intel splash screen and you will be taken to droidboot. From there, it should be fairly easy to recover the device.
If you encounter any issues or corrections, please respond to this thread and let me know. Also, I was getting tons of driver errors (Windriver Error: 0x20000015, Timeout expired) the second time I tried to do this. The trick seems to be pressing the flash button before the USB logo appears.
I discovered most of this information from these two resources:
https://www.youtube.com/watch?v=jh89aiepcjQ
http://www.asus-zenfone.com/2014/11/how-to-unbrick-zenfone-5-and-zenfone-6_8.html
REQUIRED DRIVERS AND SOFTWARE
iSocUSB Driver
Intel USB Driver for Android Devices
Intel Phone Flash Tool
Click to expand...
Click to collapse
Hello,
My device has a screwed up boot partition, but not the bootloader. My question is, how do I get this to flash without going into the USB mode?

Nandr0idC0nsumer said:
Hello,
My device has a screwed up boot partition, but not the bootloader. My question is, how do I get this to flash without going into the USB mode?
Click to expand...
Click to collapse
If you have a working boot loader, you don't need to do this.

korockinout13 said:
If you have a working boot loader, you don't need to do this.
Click to expand...
Click to collapse
Then how do I unbrick my device? I need to flash a new boot partition.
Some background: I installed the Lollipop update, then flashed the kitkat boot and fastboot IMG files (your average stupid Ryan). Can't get into fastboot anymore

Nandr0idC0nsumer said:
Then how do I unbrick my device? I need to flash a new boot partition.
Some background: I installed the Lollipop update, then flashed the kitkat boot and fastboot IMG files (your average stupid Ryan). Can't get into fastboot anymore
Click to expand...
Click to collapse
What happens instead of fastboot mode?

korockinout13 said:
What happens instead of fastboot mode?
Click to expand...
Click to collapse
"Fastboot Starting...
Fastboot Starting#1...
Fastboot Starting#2...
Fastboot Starting#3..."
Hangs there until rebooting after about 2 minutes."

Nandr0idC0nsumer said:
"Fastboot Starting...
Fastboot Starting#1...
Fastboot Starting#2...
Fastboot Starting#3..."
Hangs there until rebooting after about 2 minutes."
Click to expand...
Click to collapse
Hmm... I don't know what that is. Looks like you're in the same boat as me. I am also trying to force a way in to this mode.

korockinout13 said:
Hmm... I don't know what that is. Looks like you're in the same boat as me. I am also trying to force a way in to this mode.
Click to expand...
Click to collapse
Only thing I can think of is using "adb sideload" and making a ZIP to flash lollipop boot.img and droidboot.img
---------- Post added at 05:49 PM ---------- Previous post was at 05:28 PM ----------
korockinout13 said:
Hmm... I don't know what that is. Looks like you're in the same boat as me. I am also trying to force a way in to this mode.
Click to expand...
Click to collapse
Any other thoughts on what I could try? Leaving to eat in about an hour, and if this ain't fixed by then, I'll probably bring this to bestbuy as well

Nandr0idC0nsumer said:
Only thing I can think of is using "adb sideload" and making a ZIP to flash lollipop boot.img and droidboot.img
---------- Post added at 05:49 PM ---------- Previous post was at 05:28 PM ----------
Any other thoughts on what I could try? Leaving to eat in about an hour, and if this ain't fixed by then, I'll probably bring this to bestbuy as well
Click to expand...
Click to collapse
You have adb? That's not possible unless you are getting past the boot loader.

korockinout13 said:
You have adb? That's not possible unless you are getting past the boot loader.
Click to expand...
Click to collapse
Booting normally results in an "error" screen. randomly spamming vol up+vol down+power (SPAM!) brings up recovery, then do "apply update from adb." it puts it in a special adb where you can only use adb sideload

Nandr0idC0nsumer said:
Booting normally results in an "error" screen. randomly spamming vol up+vol down+power (SPAM!) brings up recovery, then do "apply update from adb." it puts it in a special adb where you can only use adb sideload
Click to expand...
Click to collapse
Hm... seems like you should be able to work with that if you have something flashable.

korockinout13 said:
Hm... seems like you should be able to work with that if you have something flashable.
Click to expand...
Click to collapse
Returned the tablet at Best Buy to get "fixed" (come on bestbuy, I know you mean replaced.) Thanks for your help

Repair
Hi,
I think i can help you out because i worked with the intel tool for weeks now to find a solution to root the me581cl.
Go to my thread and download a newer version of intelPhone tool.
http://forum.xda-developers.com/general/help/root-downgrade-asus-me581cl-t3075678
If you crashed your tab totaly, you must put the 4 OS IFWI,dnx files like in the first post and then also boot.img, fastboot.img, recovery.img.
Uncheck only the ifwi folder, but select it before. So its possible to check blank phone and on demand flash.
Then click start flash and the files get loadet up. Now push vol+ and vol- togehter and plug in the device.
(device must be off before you plug it in. If not, press 10 sec the power button.)
The reest you can read in my thread. A downgrade from Android 5 to 4.4 is also possible.
Good luck

Guys, my ME176CX is shafted after completing the L update, it boots to the android with the red exclamation box...i can get past this by using the volume + & power and arrive in the recovery. from there I have tried the wipe cache/wipe userdata (doesn't help) also i tried to adb sideload one of the roms in the collection of roms thread. no good. ideas??

Any solution?
I have a ME176CX, I upgraded the SO I got the message "it said 'Unable to detect power status' for me was weird but I keep going pressing the volume button it started but in the black screen with this message:
"FastBoot Starting...
FastBoot Starting...#1
FastBoot Starting...#2
FastBoot Starting...#3" I don't know what to do, It doesn't move from this screen.
Man I'm living in Venezuela a bad country to get damaged any gadget everything is 5 times expensive who your country and without any help in our soil by ASUS.

is this solution applicable to non-intel memopad? (e.g. me172V)

playinghier said:
is this solution applicable to non-intel memopad? (e.g. me172V)
Click to expand...
Click to collapse
No, this is very specific to the Intel chipset.

[FIX][Noob Friendly] No recovery, No download mode, No booting android, qhsusb_bulk?

No recovery, No download mode, No booting android, No fastboot? - In this case you are right here!
You are in the following situation:
If you power on your device, it goes to the LG logo and becomes black with running backlight quickly.
You have no access to the recovery mode.
You can't enter download mode.
There is no way to boot into the android system.
Usually your device is shown as qhsusb_bulk in Windows device manager.
Sometimes Windows recognizes about 13 partitions.
What you will need:
A working linux distribution (no way around that, but don't be afraid, e.g. slax)
If you want to run Linux in a Virtual Machine (no installation), preferably the VMWare Player (only for 64bit OSes) or an older Version of VMWare Player that supports 32bit.
A windows machine
A kdz for your device: 1, 2 or 3
The kdz extractor for WINDOWS!
Your broken G2
A micro USB cable
A little introduction:
We saw it a few times in the past months that people did weird things with their phone and didn't have anything more than a bootloader. This means no access to recovery nor download mode nor a booting android system. The last case was @petrasl27 (Thanks for the screenshots btw. ;D ). @bender_007 and @Art Vanderlay did an awesome job and helped petrasl27 to recover his phone within one hour. So thanks to those two! For those who want to read the original discussion, read a few pages here!
This thread here is similar to this one here, but I would say quite a bit easier to understand.
Disclaimer: I am not responsible for your phone. I did everything with my best knowledge, but I can't guarantee that your phone is working afterwards and every single command is written correctly. But I hope so, and it should ofc. If you have any issues, feel free to ask for help. We are kind, no worries. If you find mistakes, hit me up and I will correct them ASAP.
Let's start!
1) Install Linux
The easiest way is just do download the VMWare Player, installing, running it and using the .iso you downloaded before (pick other 3.x Linux Kernel if you downloaded slax). If you are unsure how to get Linux running, google it or ask here. Make sure, the usb port which you are going to use is linked through to the virtual machine.
You can also make the iso bootable and run the Linux as live system.
2) Extract the kdz
Switch to Windows, open the kdz extractor. Tick everything in the upper window, and click on extract kdz. Then open the .dz which just was created in the working directory of the kdz extractor. Tick "aboot_xxxxxx.bin", "boot_xxxxxx.bin" and "laf_xxxxxx.bin" in the lower window and hit extract dz. Then move the .bin files to your Linux desktop by using an USB stick, online storage or something like this.
Rename the files to "aboot.img", "boot.img" and "laf.img".
3) Preparing everything
Remove all your USB devices (except your G2 and your Keyboard & Mouse) from your computer, open a Terminal and type
Code:
ls /dev/sd*
The sda, sda1, sda2 etc. should be the partitions on your computer. But there should be a few others with sdb, sdb1, sdb2, etc. but no more. The sdb ones should be numbered from 1 to 36. This is your G2. Keep in mind how the three letters are (sdb, sdx, what so ever). (Make sure you run this as Super User, if you don't use slax!)
Then type
Code:
gdisk -l /dev/<insert the three letters you found out with the command above>
example:
Code:
gdisk -l /dev/sdb
It should now look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Keep the numbers of the marked partitions in mind. In this case aboot=5, boot=7, laf=23.
4) Preparing everything
If you've managed it to get here, you are almost done. It's almost time for the final step now:
Open a terminal and type
Code:
cd Desktop
ls
You should now see the filenames of the 3 files (aboot.img, boot.img, laf.img) on your desktop in the terminal. If you do not, you either didn't type "cd Desktop" properly (The linux terminal is case sensitive!!!) or you haven't copied the files to the desktop.
5) Flashing the stuff
Code:
dd if=aboot.img of=/dev/<the 3 letters of your G2><the number of your aboot partition>
dd if=boot.img of=/dev/<the 3 letters of your G2><the number of your boot partition>
dd if=laf.img of=/dev/<the 3 letters of your G2><the number of your laf partition>
example (in my case):
Code:
dd if=aboot.img of=/dev/sdb5
dd if=boot.img of=/dev/sdb7
dd if=laf.img of=/dev/sdb23
6) Go back to stock using the kdz method
Now just follow this thread to get back to stock.

Reserved - just in case^^

bricked my lg g2 d802..plz help
i'm from india .
i had installed lollipop 5.0.2 v30b via kdz flash method on my lg g2 d802 (indian version ) .
since then i had issues wirth my bluetooth and wifi.both were not working .
in my attempts to flash back to stock 4.2.2 , i came across ur thread and i flashed "D802_PATCH_RETURN_KK_droidth" via philz latest cwm recovery ,
but after that everything went mayhem ..
i got boot error message repeatedly and was unable to enter even recovery .
after several tries i somehow managed to enter recovery mode , but stil phone wont go past it.
I GUESS I ACCIDENTALLY FLASHED A KERNEL FOR MY OLD GALAXY NOTE(due to confusion between the saved files in the download folder ) , On my g2 too....but not sure...
after i restatred the moB , it wont turn on .
battery was 85 % ..
i'm not a newbie to flashing roms and have done aTLEAST >50 times with my lg g2 and galaxy note 2 and previously sgs2 , but this is the first time i got into a hard brick mode.
when i took the phone to servie center, they told the mob is just out of warranty and so wont get any warrany related help.
they told that the EFS HAS BEEN CONVERTED TO READ ONLY mode somehow due to improper flahing and also added that the EFS IS BEING SHOWN AS 16 PARTITION S.
they tried to repair the boot sector and recovery using OCTOPLUS TOOL BOX , but failed and told me that the latest models like G2 is not supported as if now in their TOOL BOX.
THE ONE suggestion given by them was change of PCB which is almost same as a new mob.
I'M STUCK WITHOUT MY FAV MOB G2 .......PLS HELP ME OUT SOMEHOW AND HELP ME OUT...

hbk4 said:
i'm from india .
i had installed lollipop 5.0.2 v30b via kdz flash method on my lg g2 d802 (indian version ) .
since then i had issues wirth my bluetooth and wifi.both were not working .
in my attempts to flash back to stock 4.2.2 , i came across ur thread and i flashed "D802_PATCH_RETURN_KK_droidth" via philz latest cwm recovery ,
but after that everything went mayhem ..
i got boot error message repeatedly and was unable to enter even recovery .
after several tries i somehow managed to enter recovery mode , but stil phone wont go past it.
I GUESS I ACCIDENTALLY FLASHED A KERNEL FOR MY OLD GALAXY NOTE(due to confusion between the saved files in the download folder ) , On my g2 too....but not sure...
after i restatred the moB , it wont turn on .
battery was 85 % ..
i'm not a newbie to flashing roms and have done aTLEAST >50 times with my lg g2 and galaxy note 2 and previously sgs2 , but this is the first time i got into a hard brick mode.
when i took the phone to servie center, they told the mob is just out of warranty and so wont get any warrany related help.
they told that the EFS HAS BEEN CONVERTED TO READ ONLY mode somehow due to improper flahing and also added that the EFS IS BEING SHOWN AS 16 PARTITION S.
they tried to repair the boot sector and recovery using OCTOPLUS TOOL BOX , but failed and told me that the latest models like G2 is not supported as if now in their TOOL BOX.
THE ONE suggestion given by them was change of PCB which is almost same as a new mob.
I'M STUCK WITHOUT MY FAV MOB G2 .......PLS HELP ME OUT SOMEHOW AND HELP ME OUT...
Click to expand...
Click to collapse
Did you follow the guide? Just do this. If things are unclear, just ask and someone will help you.

I want to download the first linux programme but it is just for windows 64bits. I'm running windows 7 OS 32Bits..

Soufiansky said:
I want to download the first linux programme but it is just for windows 64bits. I'm running windows 7 OS 32Bits..
Click to expand...
Click to collapse
Which one are you refering to?
NVM, adjusted the OP. Either use VirtualBox or download an older version of VMPlayer (which supports 32bit obviously) by picking Version 6.0 as major version.

Sunandroid said:
Which one are you refering to?
Click to expand...
Click to collapse
VMWAREplayer

Soufiansky said:
VMWAREplayer
Click to expand...
Click to collapse
read my post above (edited it).

Sunandroid said:
read my post above (edited it).
Click to expand...
Click to collapse
I can see that it will install Linux OS on my computer , which mean i will have 2OS . Is this safe ? I mean on every boot i should choose the OS to use or what ? Because i never used Linux as i don't need it , but this time it's a must.
Thanks.

Soufiansky said:
I can see that it will install Linux OS on my computer , which mean i will have 2OS . Is this safe ? I mean on every boot i should choose the OS to use or what ? Because i never used Linux as i don't need it , but this time it's a must.
Thanks.
Click to expand...
Click to collapse
No, if you are running it as a virtual machine (in VMWare Player or VirtualBox or whatever), it's like a programm you can start on your windows system. After you've unbricked your device, you can easily uninstall the VMWare Player and there is nothing from Linux anymore.

Sunandroid said:
No, if you are running it as a virtual machine (in VMWare Player or VirtualBox or whatever), it's like a programm you can start on your windows system. After you've unbricked your device, you can easily uninstall the VMWare Player and there is nothing from Linux anymore.
Click to expand...
Click to collapse
I get it , like a virtual OS in the main OS. Installing , will report back.
---------- Post added at 09:40 PM ---------- Previous post was at 09:18 PM ----------
@sunandroid My phone is booting at LG logo and download mode is working , so i see this method isn't for me BUT .kdz method doesn't work , firmware stuck at 24% or 49% , and one LP firmware worked but it just keep rebooting after the process.
Factory reset doesn't work , the blue line down isn't there and it reboot again and again.. Is there a way to boot in fastboot using buttons combinations ? Tried multiple things but didn't work.

Soufiansky said:
I get it , like a virtual OS in the main OS. Installing , will report back.
---------- Post added at 09:40 PM ---------- Previous post was at 09:18 PM ----------
@sunandroid My phone is booting at LG logo and download mode is working , so i see this method isn't for me BUT .kdz method doesn't work , firmware stuck at 24% or 49% , and one LP firmware worked but it just keep rebooting after the process.
Factory reset doesn't work , the blue line down isn't there and it reboot again and again.. Is there a way to boot in fastboot using buttons combinations ? Tried multiple things but didn't work.
Click to expand...
Click to collapse
What button combo do you use to factory reset?

Sunandroid said:
What button combo do you use to factory reset?
Click to expand...
Click to collapse
Volume down + power button , just after LG logo i press them again , then yes , yes , it shows the green android but there is no factory reset ( the blue line isn't there if you know what i'm talking about)
Tried also the same thing then power 3 times , same also..

problem soleved.....finally
Sunandroid said:
Did you follow the guide? Just do this. If things are unclear, just ask and someone will help you.
Click to expand...
Click to collapse
finally , i solved the problem..
with the help of soombons (droidth) , i was able to fix my d802 in just 2 minutes. - USING SRK 2.0 TOOL ...
sharing the link for people with same problems
---
[LG-G2] Unbrick (qhsusb_bulk) by SRK Tool 2.0 (D8…: https://youtu.be/ERZvlJIC9dE
tonnes of thanks to SOOMBONS for the prompt help !..
CHEERS !!!

Can anyone help me out on a D801?
The phone goes into bootloop... the LG logo appears for a few seconds, disappears, then reappears. I'm not able to go into download mode, no fastboot, and also no recovery. When I do the volume down + power button combo I can get to the factory reset screen but selecting Yes both times just sends me back to the same LG logo bootloop.
What is weird is that my phone use to display as QHSUSB_BULK and it would bring up a bunch of drives... but now that doesn't happen and my phone isnt even showing in device manager anymore. Also, my phone used to show the first "Download Mode" splash screen when I held the volume up button while plugging it into my comp but it just does the same bootloop. No more errors... just bootloops...
Do I have to short the capacitors like in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
or this one: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

Soufiansky said:
Volume down + power button , just after LG logo i press them again , then yes , yes , it shows the green android but there is no factory reset ( the blue line isn't there if you know what i'm talking about)
Tried also the same thing then power 3 times , same also..
Click to expand...
Click to collapse
Weird. Did you use this method to go back to stock: http://forum.xda-developers.com/showthread.php?t=2432476
This worked fine for me every time I used it. Try to flash a KK ROM again, but do a CSE flash.
chaitea said:
Can anyone help me out on a D801?
The phone goes into bootloop... the LG logo appears for a few seconds, disappears, then reappears. I'm not able to go into download mode, no fastboot, and also no recovery. When I do the volume down + power button combo I can get to the factory reset screen but selecting Yes both times just sends me back to the same LG logo bootloop.
What is weird is that my phone use to display as QHSUSB_BULK and it would bring up a bunch of drives... but now that doesn't happen and my phone isnt even showing in device manager anymore. Also, my phone used to show the first "Download Mode" splash screen when I held the volume up button while plugging it into my comp but it just does the same bootloop. No more errors... just bootloops...
Do I have to short the capacitors like in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
or this one: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Yeah I guess you have to do as you mentioned. Only thing you could try before doing so:
Hold down the power button for 20 secs. Then wait a few secs and try to get into download mode. Maybe the device shows up as qhusb_bulk again.

Please help, Im stuck!!!
Since yesterday my phone is stuck, only LG Logo, no download mode, no factory mode, no recovery, no nothing but the lg logo.
I tried thw mentioned tool and what the OP posted here, but in both methods I get stuck:
The LG G2 is not recognized as as drive anymore, the one thats supposed to have many partitions, sdb, sdx, what so ever, numbered from 1 to 36.
Without this I cant continue.
Any help? Using D802 international version
Thanks

Batou069 said:
Please help, Im stuck!!!
Since yesterday my phone is stuck, only LG Logo, no download mode, no factory mode, no recovery, no nothing but the lg logo.
I tried thw mentioned tool and what the OP posted here, but in both methods I get stuck:
The LG G2 is not recognized as as drive anymore, the one thats supposed to have many partitions, sdb, sdx, what so ever, numbered from 1 to 36.
Without this I cant continue.
Any help? Using D802 international version
Thanks
Click to expand...
Click to collapse
Do you have a windows machine?
If yes, try this http://forum.xda-developers.com/showpost.php?p=56608822&postcount=2 and see if it is displayed as qhusb_bulk in device manager after you've done this.

Sunandroid said:
Do you have a windows machine?
If yes, try this http://forum.xda-developers.com/showpost.php?p=56608822&postcount=2 and see if it is displayed as qhusb_bulk in device manager after you've done this.
Click to expand...
Click to collapse
Hi, thanks for the quick reply
I have a windows machine, yes, but no idea how to open my device. I hope this wont be necessary...
What happened last: After using a very laggy rom for over a week, I decided to flash PA. I wiped everything except the format, so data/media is kept... i guess that the flash didnt went well, and after reboot im stuck at LG logo... manually putting it into recovery isnt working anymore.
When I connect the phone to the pc only the "LGE Android MTP Device" is identified but with a fail (yellow triangle and exclemation mark in device manager).
SRK Tool -> Disk Managment Tool shows only Disk0 which is c:
In the virtual machine, under VM> removable devices I can see the LGE Android, and when I connect it (disconnect from host) nothing changes, no sdx, sdb or anything like this, only sda (C
I installed the LG Drivers but it wont help. Here I am, with a bricked phone
What do you think?
Thanks

Batou069 said:
Hi, thanks for the quick reply
I have a windows machine, yes, but no idea how to open my device. I hope this wont be necessary...
What happened last: After using a very laggy rom for over a week, I decided to flash PA. I wiped everything except the format, so data/media is kept... i guess that the flash didnt went well, and after reboot im stuck at LG logo... manually putting it into recovery isnt working anymore.
When I connect the phone to the pc only the "LGE Android MTP Device" is identified but with a fail (yellow triangle and exclemation mark in device manager).
SRK Tool -> Disk Managment Tool shows only Disk0 which is c:
In the virtual machine, under VM> removable devices I can see the LGE Android, and when I connect it (disconnect from host) nothing changes, no sdx, sdb or anything like this, only sda (C
I installed the LG Drivers but it wont help. Here I am, with a bricked phone
What do you think?
Thanks
Click to expand...
Click to collapse
Are you sure you can't get into download mode? (hold down the power button for 20 seconds (not shorter!), then holding the vol+ button and connect the phone to a computer)?
I could imagine that you can enter the recovery after holding down the powerbutton for 20 seconds with the button combo. I think so, because the kernel must be working somehow since it still manages to get shown properly on windows.
If none of the options above is working, the pin shortage is probably the easiest way to get into qhsusb_bulk and start freshly (following this thread).

[GUIDE] Fix a bootloop on a rooted Zenfone 2

Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:

i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!

Worked! Thanks!
Thank you so much! :good:
It worked for me. Although I had to clear cache and dalvik cache before installing the zip, otherwise my phone would reboot into fastboot when trying to flash the zip.
And best of all: I didn't loose any data!! Just had to root again using method 3 and install busybox.
I edited my build.prop because on the Amazon App Store there is an app (Navigon Europe) that can't be installed because Amazon says my device would be incompatible which it isn't because the Play Store says it's fine. Anyway, upon rebooting I was stuck at the splash screen. Luckily I was still able to get into fastboot...
Thanks again!

Still doesnt boot up
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance

pozum said:
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance
Click to expand...
Click to collapse
Tried other usb ports and cables? do you have all necessary drivers?

ElmirBuljubasic said:
Tried other usb ports and cables? do you have all necessary drivers?
Click to expand...
Click to collapse
yes and yes, different ports, different cables, 2 different computers - nothing... thanks

Same problem
I'm having the exact same issue as Pozum. ADB won't detect device. It won't boot. Is it completely bricked or can I do something?

try flashing full rom from SD card, rename it so that it can be recognized.
Sent from my ASUS_Z00AD using Tapatalk

luisoman2000 said:
try flashing full rom from SD card, rename it so that it can be recognized.
Click to expand...
Click to collapse
I have the stock android recovery utility. It doesn't give an option to flash/install anything. Or am I missing something?

Help
hello ...i recently rooted rooted my zenfone 2 and deleted the bloatware . I have and app call kingroot which i used to uninstall those apps ... this app also has a thing called Purify . i used it and it told me to restart and so i did . now the phone is stuck in bootloop . This is the 1st time I've restarted after rooting . Will your process work on mine ? Thanks in advance

I think yes, try it

Mael_RadecFR said:
Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
View attachment 3458839
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
View attachment 3458828
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
View attachment 3458829
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
View attachment 3458830
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
View attachment 3458840
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
View attachment 3458841
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:
Click to expand...
Click to collapse
Why in the **** did you link the french site to this?

This does not work because when the phone is bricked the SD card is not mountable.

Thanks the solution is jst perfect BUT AFTER UPDATE TOUCH PANEL DONT WORK

QA88 said:
Hello buddy,
I really need your help. I rooted my Asus with your method. But at that time you had not post CWM Recovery. Unfortunately, my nephew play with my Asus then he touch update OTA. Finally My device being stuck on Asus logo, while it doesn't have CWM Recovery.
Could you please give guidance
Click to expand...
Click to collapse
I brought you here, check on first post, hope it help. Good luck

Hi there, hope there's a chance of a reply !
So I've got the blinking Android robot with red explanation mark! and I'd just like to know how long it takes for the phone to reload after installation?
Its stuck on the Asus boot up screen with the loading symbol under it !

I did the same thng.
chetank08 said:
i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!
Click to expand...
Click to collapse
Hello. I believe I did the same exact thing . Did you by chance ever get back into Recover y mode or get the PC to recognize your phone. I'm a total novice with this, and very lost. Thank you.

Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1

i was hope ... but
Hi! there.
i spend last to days literelly trying to fix my zf2 ZE551ml, it gets frozen when i wipe cache so i force power off... what a mistake.
i was trying to fix it, and i got it worst. i think i erase recovery menu, so i can't adb sideload, fastboot saids that can not load image system.img, asus flash tool said "flash image failure (failed with error #1), xFSTK works to bring fastboot menu, but since i don't have the file to put on OS dns space, it didn't work, but, after hours and hours, in my last try of a long nigth, i did this guide.
when i see a cwm icon, i can't believe it!! almost made my entire two days, but suddenly, it was all sad, when i tried to install from external sd card it says that there is an error. And the problem still there. here is an option to install zip by sideload, but in de pc said not device detectec.
i really don't know what to do, i'm really tired, and my options are getting over...
any ideas??
Thank you all!!

maciek90 said:
Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1
Click to expand...
Click to collapse
Thank you for suggesting this guide! It did help me to get back into the recovery mode, however, after following the steps within the guide very diligently. I am still unable to get past the initial loading screen. . I received the permissions denied error just as the post suggested I would. I wiped the cache partition at the end of following the steps as suggested. Still. It will not load to the Welcome screen .

Lg g3 auto-rec "hard brick" fix

Hello everyone, first let me give major props to my man @bender_007 for creating the amazing LG G Series Autorec Apps which make installing TWRP on LG G Devices a simple process and for also helping me and others who ignorantly misused his app, thanks B!
Anyway recently I bought a LG G3 on Verizon that was on 35b 5.1.1 Lollipop and I rooted. Boy was I eager to get some TWRP poppin on this beast, however flashing TWRP thru Flashify and TWRP Manager left me unsuccessful giving me Secure Booting Error. So desperate I seen Autorec on the Play Store, installed immediately. From there I went through the app's proccesses and from there attempted to boot into recovery hoping for some success.... I did not realize this was went for 24b 5.0.1 until it was late, I mean hey he says it in the description. The phone was dead it wouldn't show anything on the display when I held the power button and it only vibrated, I was f***ed.... At least that is what I thought. I used the method below that me and @bender_007 were collaborating upon as he tried to help me. So please give him credit. I cannot guarantee this will work for you but it worked for me and you don't have to worry about opening up your phone and shorting pins, that nonsense if this works for you.
MATERIALS
A FUNCTIONAL COMPUTER (PREFERABLY WINDOWS, I USED WINDOWS 7)
LG FLASH TOOL 2014: http://www.mediafire.com/?fwrcd3pdj0svjtb
LG DRIVERS-
UNIVERSAL: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
VERIZON:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427
THE LATEST KDZ FOR YOUR PHONE MODEL (GOOGLE IT)
Your Dead but Still Amazing LG G3 and a USB Cable
Note: IF DONE PROPERLY YOU WILL STILL HAVE ALL YOUR EXSISTING DATA PRE-BRICK
PROCEDURE
1. Gather all materials, and know the locations of all your downloaded files.
2. Install the drivers for your phone.
3. Unzip LGFlashTool_2014.zip
4. Move the .KDZ you should've downloaded to the LGFLASHTOOL_2014 folder.
5. Open Device Manager (press start, type in Device Manager into search bar, hit enter)
6. Click View, "Show Hidden Devices"
7. PLUG in USB CABLE TO COMPUTER ONLY!
8. THIS STEP IS VERY VERY VERY IMPORTANT! TAKE THE BATTERY OUT OF YOUR LG G3. PUT IT BACK IN. CLOSE THE BACK. HOLD VOLUME UP ONLY, WHILE HOLDING POWER UP DO NOT LET GO PLUG IN OTHER HALF OF USB CABLE INTO PHONE. KEEP HOLDING VOLUME UP FOR 20 SECONDS. YOURE PHONES SCREEN WILL STILL BE BLACK AND IT SHOULDVE VIBRATED ABOUT 2 SECONDS AFTER YOU PLUGGED IN WIRE (You'll know when you do it right when COMPUTER says installing drivers in bottom right corner.)
9. In Device Manager under Modems there should be something like LGandroidNET I DONT REMEMBER EXACTLY THIS IS ALL OFF THE TOP OF MY HEAD. Anyway, if it says that then you are good, believe it or not your in download mode. (IF YOU DO NOT SEE THIS REPEAT STEP 8)
10. Go to LGFlashTool_2014 folder and run the LGFlashTool2014.exe application.
11. Change PhoneMode to Emergency
12. For "SELECT KDZ FILE" open the folder of the the FlashTool, it should be on it by default and pick the KDZ file.
13. Click "Normal Flash"
14. On the next SCREEN click "START" at the bottom
15. Now there should be a pop-up that says "Select Country & Language" Do not mess with this, just click "OK"
16. There should be a SCREEN now that has a % or whatever... From HERE TO THE END OF IT DO NOT UNPLUG YOUR PHONE!!!
17. When you hit like 85% your phone will boot up do not UNPLUG still and once it hits 100% your done! Safe to UNPLUG and YOU FIXED YOUR PHONE!!!!!!
If you have any questions please ask I have pure empathy for anyone who goes through this hell.

The first time I attempted to connect the phone I successfully had the phone under the modem tab. After being unable to find a .KDZ file (after a minute of searching) I stupidly tried another approach. Now after that not cooperating, I came back to attempt this again after finding a .KDZ file and am unable to set up the device properly to show under the modem tab. I'm following your instructions exactly and gave no luck. Any idea why this would be happening?

wombatthing said:
The first time I attempted to connect the phone I successfully had the phone under the modem tab. After being unable to find a .KDZ file (after a minute of searching) I stupidly tried another approach. Now after that not cooperating, I came back to attempt this again after finding a .KDZ file and am unable to set up the device properly to show under the modem tab. I'm following your instructions exactly and gave no luck. Any idea why this would be happening?
Click to expand...
Click to collapse
Okay I'm here to provide my best assistance and for that you'll have to answer a few questions?
1. What is your device model? ex. VS985 Verizon
2. What KDZ did you attempt to flash? ex. VS98547a_01.kdz
Looking forward to your reply.
Sent from my VS985 4G using Tapatalk

@wombatthing I would go to device manager go to view "Show Hidden devices" then disconnect your phone take out battery put it back in close back then hold volume up for 20 SECONDS while doing that connect to computer. It probably won't say installing drivers because you said it worked the First time, from there see if it's under Modems. Good luck my friend in here for any questions
Sent from my VS985 4G using Tapatalk

Will this method keep all my files that were stored in the internal memory? I'm not worried about the device, i just want my files! Camera pictures etc.
Edit. I tried it but in DIAG mode because i'm afraid emergency can delete my files? I can see the "LGandroidNET " but no vibration and seems like the driivers never install properly. My phone is completely dead.
@bender_007 @OneShotGoGetter
Thanks

Ray1000 said:
Will this method keep all my files that were stored in the internal memory? I'm not worried about the device, i just want my files! Camera pictures etc.
Edit. I tried it but in DIAG mode because i'm afraid emergency can delete my files? I can see the "LGandroidNET " but no vibration and seems like the driivers never install properly. My phone is completely dead.
@bender_007 @OneShotGoGetter
Thanks
Click to expand...
Click to collapse
My friend all is good. First of all as long as it says LGandroidnet you are good you should be in download mode, in lg flash took for mode click emergency and not diag then click normal flash THIS WILL KEEP YOURE DATA IF YOU SEE CRS FLASH OR SOMETHING LIKE THAT THEN ITLL RESET YOURE PHONE just do Emergency and Normal Flash and it should work. Hope I help if you have questions please ask.

@Ray1000 "Emergency" Mode is just Download Mode flashing. Diag is not that's why you were unsuccessful.

Thanks for this! I'm getting stuck at the end (step 16) when the flash tool says:
"Problem with communication between cell phone and PC.
Please disconnect the cable from your cell phone in order and remove and connect the battery. Power on your cell phone and press the Restart button to resume update. If LG Support Tool is stopped abnormally, try with [Options]-[Upgrade Recovery] in tool menu."
I've tried just clicking the retry button, and also unplugging the phone and putting it in recovery mode again before clicking retry. Neither has worked so far. Any thoughts?
Phone is D855, kdz version is D855V20b_00

For all people with Windows 10 an problems with drivers (device is detected by Windows but app is not connecting). Decompress de correct cab for your Windows version, and update the driver "Qualcomm HS-USB QDloader 9008" with the path you used to extract. Now this driver isn't advertising that isn't signed anymore, and all apps will connect with your LG G3
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x86
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x64

mackleroar said:
Thanks for this! I'm getting stuck at the end (step 16) when the flash tool says:
"Problem with communication between cell phone and PC.
Please disconnect the cable from your cell phone in order and remove and connect the battery. Power on your cell phone and press the Restart button to resume update. If LG Support Tool is stopped abnormally, try with [Options]-[Upgrade Recovery] in tool menu."
I've tried just clicking the retry button, and also unplugging the phone and putting it in recovery mode again before clicking retry. Neither has worked so far. Any thoughts?
Phone is D855, kdz version is D855V20b_00
Click to expand...
Click to collapse
Sorry for the late response. First of all you are welcome. I don't know if you fixed the problem yet but I'll help anyway. First remove youre battery for at least 10 seconds then put battery in, hold up and connect charger for 20 seconds. Of you are unsuccessful try reinstalling drivers. Best of luck my friend.
Sent from my VS985 4G using Tapatalk

Hi, I have tried your method but get stuck on "Problem with communication..." Is this a problem specific to windows 10?
I have attempted to update the Qualcomm HS-USB QDloader 9008 but cannot see it in device manager.
Any help would be greatly appreciated!

Perezvon said:
Hi, I have tried your method but get stuck on "Problem with communication..." Is this a problem specific to windows 10?
I have attempted to update the Qualcomm HS-USB QDloader 9008 but cannot see it in device manager.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Im having the same problem!!!!!! I've tried everything. I will let you know if I fix it and please let me know if you get your's running?

Does anyone know if this method will work for the Sprint LS990 variant? I too had my phone broke by autorec and I lost download bit have access to TWRP and can flash roms but can't do a factory reset with the LG Flash Tool.
Sent from my LG-ls990 using Tapatalk

Failed to flash
Hi,
Thank you for this post. But unfortunately I can not get back my device. What happened was I bricked my phone while flashing TWRP. It's a G3 D855 and does not power on at all. Screen is blank, no LED or vibrate. I tried volume up/down combinations with power button but nothing happens. However when I connect it to PC, device manager shows it under Modem and COM ports.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to flash a stock ROM using your method. But I got following error during process.
The only problem was phone did not vibrate when I connect it as you mentioned.
Do you think my phone is gone forever? Is there any other way? Appreciate a reply.
Thanks!

i also cannot find the Qualcomm's driver on windows 10 & phone looses communication with flash tool..

vajee555 said:
Hi,
Thank you for this post. But unfortunately I can not get back my device. What happened was I bricked my phone while flashing TWRP. It's a G3 D855 and does not power on at all. Screen is blank, no LED or vibrate. I tried volume up/down combinations with power button but nothing happens. However when I connect it to PC, device manager shows it under Modem and COM ports.
I tried to flash a stock ROM using your method. But I got following error during process.
The only problem was phone did not vibrate when I connect it as you mentioned.
Do you think my phone is gone forever? Is there any other way? Appreciate a reply.
Thanks!
Click to expand...
Click to collapse
the same thing happened to me, just dont close the error notification and move it to the side, so you can see the cellphone is upgrading, dont close the error message until your cellphone boots, this worked for me

ayarihime said:
the same thing happened to me, just dont close the error notification and move it to the side, so you can see the cellphone is upgrading, dont close the error message until your cellphone boots, this worked for me
Click to expand...
Click to collapse
Hello. I managed to get my device to work. Flashed a stock MM rom and now stucked with damn Mcfee kill switch. Can not go to download mode either . Any idea how to fix this? Thanks!

Hi how did you manage to fix it @vagee555? I am receiving the same error message: Problem with communication between cell phone and PC

mjmaxint said:
Hi how did you manage to fix it @vagee555? I am receiving the same error message: Problem with communication between cell phone and PC
Click to expand...
Click to collapse
Hello, I had to short some other two pins to get it identified by my PC. The pins mentioned it this post did not work for me. Follow the link given below and it will work for you. Thank me later.
http://forum.gsmhosting.com/vbb/f494/how-hard-unbricked-lg-g3-all-variants-fix-qhsusb-bulk-_-qualcomm-9008-a-2029025/

He guys thank you very much. My LG3 was already down for months after many failed attempts and I was about to bin it. Decided to give it one last try, found your instructions and it works, I now have Marshmallow!! (However I downloaded the KDZ file from "downloadmirror.de" and I am not sure if that was a good idea.

Huawei P9 Lite The phone does not get up / 5% instalation error / soft brick?

Hi!
As in the title, something wrong with my P9 Lite happened. Namely, the day before yesterday he decided to turn off by himself with a 50% battery there, but turned on normally after 2minutes. At night from Wednesday to Thursday it discharged and in the morning after charging I couldn`t start it.
The phone either booted and stopped several times on the Huawei logo and the note "Powered by Android". I can enter by using a key combination the eRecovery mode. Ultimately, it started up one time, and it worked until the evening and until it was discharged again. After that it has been charged to 60%, one time he turned on but after an hour of further charging he fell on the amen. I've been trying to fight him since the morning that maybe he'll turn on like yesterday, but no. I had this situation for the first time in August 2018, then in February and July 2019 with that it was probably a decent brick then, because this black screen was constantly displayed with an exclamation mark and some error. A visit in smartphone service has always helped, but I can't spend 80 PLN again to fix that issue. After the repair in July, I specially wrote the system version so that I would have knowledge for the future in the event of a repeat. The phone had the firmware as below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Today I downloaded the system from this link: huawei-firmware.com/rom/huawei-p9-lite/vns-l21/9618
However, at 5% installation the error crashes and I can only restart the phone. I tried using two different sd cards, so the option of the card being faulty is 99% out of the question. I hope that some good soul will help me, because I believe that I can solve this problem independently at home and not necessarily after paying with a GSM spec. : P
I forgot to add that the phone has not been updated since it was repaired or anything. I didn't do any treatments myself with loading custom systems. He just turned himself off, without any previous signs of malfunction and end. I was surprised that the phone doesn`t want to accept the software that was uploaded by a service technician ... but maybe I am doing something wrong.
At the end fastboot situation:
PHONE: unlocked
FRP: locked
EDIT:
In another forum I got instructions to upload rollback and then soft "C432B160" and everything will be good. I took it up and the rollback installation was completed, after a minute the phone rebooted. Unfortunately, this problem caused another problem, because since I installed rollback I can`t enter the erecovery mode, where I have possibility to shut down...so phone stuck with the Huawei logo all the time. I was supposed to upload this software, but I had to leave the house and the phone was completely discharged when I returned. From that moment only fastboot mode starts, or after switching on and trying with different phone buttons, it always becomes a logo and got freezed. I was charging it for an hour, but after disconnecting from the charger the LED was blinking red and I saw on the screen message about 0% battery. After that another situation...I connected it to the charger and after a second showed me message of 100% battery, but after a second phone started automatically and hung on the logo again. After unplugging it from charger and trying to start without charging, the LED flashes red and message about disscharge was on the screen. Now I`m seriously starting to wonder, if anything from this phone will still be..... :/
Links to rollback and software (according to which I did not manage to upload before discharging the phone):
http://download-c1.huawei.com/downlo...00&siteCode=pl
http://huawei-firmware.com/rom/huawei-p9-lite/vns-l21/9571

Nicramcio said:
Hi!
As in the title, something wrong with my P9 Lite happened.
Namely, the day before yesterday he decided to turn off by himself with a 50% battery there, but turned on normally after 2minutes. At night from Wednesday to Thursday it discharged and in the morning after charging I couldn`t start it.
The phone either booted and stopped several times on the Huawei logo and the note "Powered by Android". I can enter by using a key combination the eRecovery mode. Ultimately, it started up one time, and it worked until the evening and until it was discharged again. After that it has been charged to 60%, one time he turned on but after an hour of further charging he fell on the amen. I've been trying to fight him since the morning that maybe he'll turn on like yesterday, but no. I had this situation for the first time in August 2018, then in February and July 2019 with that it was probably a decent brick then, because this black screen was constantly displayed with an exclamation mark and some error. A visit in smartphone service has always helped, but I can't spend 80 PLN again to fix that issue. After the repair in July, I specially wrote the system version so that I would have knowledge for the future in the event of a repeat. The phone had the firmware as below:
Today I downloaded the system from this link: huawei-firmware.com/rom/huawei-p9-lite/vns-l21/9618
However, at 5% installation the error crashes and I can only restart the phone. I tried using two different sd cards, so the option of the card being faulty is 99% out of the question. I hope that some good soul will help me, because I believe that I can solve this problem independently at home and not necessarily after paying with a GSM spec. : P
I forgot to add that the phone has not been updated since it was repaired or anything. I didn't do any treatments myself with loading custom systems. He just turned himself off, without any previous signs of malfunction and end. I was surprised that the phone doesn`t want to accept the software that was uploaded by a service technician ... but maybe I am doing something wrong.
At the end fastboot situation:
PHONE: unlocked
FRP: locked
EDIT:
In another forum I got instructions to upload rollback and then soft "C432B160" and everything will be good. I took it up and the rollback installation was completed, after a minute the phone rebooted. Unfortunately, this problem caused another problem, because since I installed rollback I can`t enter the erecovery mode, where I have possibility to shut down...so phone stuck with the Huawei logo all the time. I was supposed to upload this software, but I had to leave the house and the phone was completely discharged when I returned. From that moment only fastboot mode starts, or after switching on and trying with different phone buttons, it always becomes a logo and got freezed. I was charging it for an hour, but after disconnecting from the charger the LED was blinking red and I saw on the screen message about 0% battery. After that another situation...I connected it to the charger and after a second showed me message of 100% battery, but after a second phone started automatically and hung on the logo again. After unplugging it from charger and trying to start without charging, the LED flashes red and message about disscharge was on the screen. Now I`m seriously starting to wonder, if anything from this phone will still be..... :/
Links to rollback and software (according to which I did not manage to upload before discharging the phone):
http://download-c1.huawei.com/downlo...00&siteCode=pl
http://huawei-firmware.com/rom/huaw...
Your device is natively single or dual sim ?
Click to expand...
Click to collapse

Dadditz said:
Hey dude, let me know if i understood well...
Your device won't boot up anymore, isn't it ?
VNS-L21C432B120 ?? It's one of the oldest firmware you can have..
I really don't know if i can help, but if you agree we can give a try..
Your device is natively single or dual sim ?
Click to expand...
Click to collapse
Yas, my device won`t boot up since 1st of July and I don`t know why...because I don`t tried to update firmware, unlock bootloader etc.
I know that, but year ago I have a same problem and GSM service installed that soft.
My device is dual sim.
Thanks for help!

Nicramcio said:
Yas, my device won`t boot up since 1st of July and I don`t know why...because I don`t tried to update firmware, unlock bootloader etc.
I know that, but year ago I have a same problem and GSM service installed that soft.
My device is dual sim.
Thanks for help!
Click to expand...
Click to collapse
Ok let's go..
Take a working (at least 4gb) SD,
move away all your stuff then format it as FAT32.
Download this >> update.zip << file (VNS-L21C432B160/dual sim).
Unzip it, you find UPDATE.APP file.
Turn off the phone.
On your PC create a folder and rename it DLOAD.
Copy/paste (only) UPDATE.APP file into DLOAD folder
and put it into SD, then insert the SD into your device.
Turn the device on keeping vol+ & vol- then power button
all together till an update screen appears.
Ok, release now the buttons...
After the flashing process, your device should reboot to system.
If passes over 15 mins, reboot into the e-recovery
(press vol+ & power button) and do a factory reset + wipe cache.
Done !!
NOTE: the firmwrare link is taken using Firmware Finder repo,
all credits go to this fantastic app team/users that created it.

Dadditz said:
Ok let's go..
Take a working (at least 4gb) SD,
move away all your stuff then format it as FAT32.
Download this >> update.zip << file (VNS-L21C432B160/dual sim).
Unzip it, you find UPDATE.APP file.
Turn off the phone.
On your PC create a folder and rename it DLOAD.
Copy/paste (only) UPDATE.APP file into DLOAD folder
and put it into SD, then insert the SD into your device.
Turn the device on keeping vol+ & vol- then power button
all together till an update screen appears.
Ok, release now the buttons...
After the flashing process, your device should reboot to system.
If passes over 15 mins, reboot into the e-recovery
(press vol+ & power button) and do a factory reset + wipe cache.
Done !!
NOTE: the firmwrare link is taken using Firmware Finder repo,
all credits go to this fantastic app team/users that created it.
Click to expand...
Click to collapse
Thank you, but I tried to install by dload method some kind of softwares B120,130,150,160 if I remember...but no effects. In other forum, they said that I need to install rollback, and after that firmware B160. Ok, I installed rollback perfectly but after that I can`t go to erecovery mode...only fastboot is avaliable and whene I turn on phone it would stuck on Huawei logo. Now it`s discharged and i don`t have any idea how can i charged it to over 30% of battery.

Nicramcio said:
Thank you, but I tried to install by dload method some kind of softwares B120,130,150,160 if I remember...but no effects. In other forum, they said that I need to install rollback, and after that firmware B160. Ok, I installed rollback perfectly but after that I can`t go to erecovery mode...only fastboot is avaliable and whene I turn on phone it would stuck on Huawei logo. Now it`s discharged and i don`t have any idea how can i charged it to over 30% of battery.
Click to expand...
Click to collapse
Dude if there is some hardware problem
it will be a little difficult to recover..
so when you bringed it to service have they replaced the motherboard?
If not you may still have hardware problems, but let's keep this aside ...
Try again what i wrote..
In the meantime I give you the correct rollback link, maybe you used the wrong one.
Dude, the rollback package is used only to revert from android 7 to android 6.
In order to unbrick the device, in android 6 environment, dload method is enough..
Visit the UNIFIED HELP THREAD, post #6, see by yourself..

Dadditz said:
Dude if there is some hardware problem
it will be a little difficult to recover..
so when you bringed it to service have they replaced the motherboard?
If not you may still have hardware problems, but let's keep this aside ...
Try again what i wrote..
In the meantime I give you the correct rollback link, maybe you used the wrong one.
Dude, the rollback package is used only to revert from android 7 to android 6.
In order to unbrick the device, in android 6 environment, dload method is enough..
Visit the UNIFIED HELP THREAD, post #6, see by yourself..
Click to expand...
Click to collapse
I know it`s some kind of big problem.
3 times it was unbricked in service, but that is non authorized and they don`t do anything with motherboard...only installed me somehow new software for money circa 20 USD/EUR.
Okay i`ll try that tomorow and show results. I keep my fingers crossed, that my Huawei tomorow boot normal.

Nicramcio said:
I know it`s some kind of big problem.
3 times it was unbricked in service, but that is non authorized and they don`t do anything with motherboard...only installed me somehow new software for money circa 20 USD/EUR.
Okay i`ll try that tomorow and show results. I keep my fingers crossed, that my Huawei tomorow boot normal.
Click to expand...
Click to collapse
Sorry, i forgot to add the LINK to correct rollback package,
here you are..
Cheers
Edit: next time, maybe tomorrow i will post how to extract
firmware (BOOT,RECOVERY,SYSTEM) from UPDATE.APP
and how to flash it via fastboot commands.

Dadditz said:
Sorry, i forgot to add the LINK to correct rollback package,
here you are..
Cheers
Edit: next time, maybe tomorrow i will post how to extract
firmware (BOOT,RECOVERY,SYSTEM) from UPDATE.APP
and how to flash it via fastboot commands.
Click to expand...
Click to collapse
I don`t have time to do something with my bricked phone over a week, but today I tried to install software B160 and rollback by dload mode. It didn`t work. I can`t charge my phone over 30% of battery, and when I plug off the charger, phone have probably not enough battery to turn software installation. Also when I tried to hold 3 buttons, and then connected the charger cable...the installation didn`t start. So I think, that you must tell me how to flash soft via fastboot commands...because this is the only one mode that I can turn on my phone. I feel completely helpless, because today my replacement phone broke...so I have to bring Huawei back to life.
EDIT:
I forgot to mentioned...When i hold 3 buttons to start installation process phone vibrate one, then shown red lightning sign that battery is empty, and LED flashed 3 times red...then screen go black and device is powered off...nothing else. Also I tried 4 different SD cards, so I think now the problem with dload mode is that phone is not charged over 30 or 50% (I don`t remeber that) of battery what is required to start the installation process.
Also when I try to charge it, only LED flashes red all the time and on the screen I don`t have information that phone is charging.

Nicramcio said:
I don`t have time to do something with my bricked phone over a week, but today I tried to install software B160 and rollback by dload mode. It didn`t work. I can`t charge my phone over 30% of battery, and when I plug off the charger, phone have probably not enough battery to turn software installation. Also when I tried to hold 3 buttons, and then connected the charger cable...the installation didn`t start. So I think, that you must tell me how to flash soft via fastboot commands...because this is the only one mode that I can turn on my phone. I feel completely helpless, because today my replacement phone broke...so I have to bring Huawei back to life.
EDIT:
I forgot to mentioned...When i hold 3 buttons to start installation process phone vibrate one, then shown red lightning sign that battery is empty, and LED flashed 3 times red...then screen go black and device is powered off...nothing else. Also I tried 4 different SD cards, so I think now the problem with dload mode is that phone is not charged over 30 or 50% (I don`t remeber that) of battery what is required to start the installation process.
Also when I try to charge it, only LED flashes red all the time and on the screen I don`t have information that phone is charging.
Click to expand...
Click to collapse
Hi dude,
I suspect your device has some serious hardware problem.
If the device has fallen off, it may have broken or unstuck / unsoldered something,
hence the need for a check by specialized technicians / service point.
I suggest, if you have the possibility,
to replace the device with a new or even used one,
functioning and a little more updated / upgradeable.
But trying won't cost anything, so let's do it !!!
Make sure you have minimal adb & fastboot
or a complete platform-tools (link in the same page / it's your choise)
and huawei drivers /HiSuite on your PC,
then in fastboot mode do the command > fastboot devices.
If you have a response like > numbers/letters........device <
then you're ok to go, otherwise it means your PC don't "see" your phone...
From XDA download Huawei Update Extractor and use it
to extract BOOT.img, RECOVERY.img (not RECOVERY2.img)
and SYSTEM.img from your UPDATE.APP file
you extracted from update.zip...(see attachment)
Put those three files into a folder and rename it as you want
(maybe the same where you extracted UPDATE.APP),
then tap in the folder address bar (see attachment) and type cmd then hit enter.
A command window will appears, now you're ready to flash.
In order type following commands:
1 - fastboot flash boot BOOT.img; (let it flash)
2 - fastboot flash recovery RECOVERY.img; (let it flash)
3 - fastboot flash system SYSTEM.img; (let it flash)
Once finished type > fastboot reboot and cross your fingers...
If all will take right direction your device will reboot correctly,
otherwise (if passes over 15 mins) reboot recovery (vol+ & power buttons)
and do a factory reset..
Hope sincerely it will boot up... :angel:
P.S.: I don't know why i can't post jpg directly, so i zipped into one file...

Dadditz said:
Hi dude,
I suspect your device has some serious hardware problem.
If the device has fallen off, it may have broken or unstuck / unsoldered something,
hence the need for a check by specialized technicians / service point.
I suggest, if you have the possibility,
to replace the device with a new or even used one,
functioning and a little more updated / upgradeable.
But trying won't cost anything, so let's do it !!!
Make sure you have minimal adb & fastboot
or a complete platform-tools (link in the same page / it's your choise)
and huawei drivers /HiSuite on your PC,
then in fastboot mode do the command > fastboot devices.
If you have a response like > numbers/letters........device <
then you're ok to go, otherwise it means your PC don't "see" your phone...
From XDA download Huawei Update Extractor and use it
to extract BOOT.img, RECOVERY.img (not RECOVERY2.img)
and SYSTEM.img from your UPDATE.APP file
you extracted from update.zip...(see attachment)
Put those three files into a folder and rename it as you want
(maybe the same where you extracted UPDATE.APP),
then tap in the folder address bar (see attachment) and type cmd then hit enter.
A command window will appears, now you're ready to flash.
In order type following commands:
1 - fastboot flash boot BOOT.img; (let it flash)
2 - fastboot flash recovery RECOVERY.img; (let it flash)
3 - fastboot flash system SYSTEM.img; (let it flash)
Once finished type > fastboot reboot and cross your fingers...
If all will take right direction your device will reboot correctly,
otherwise (if passes over 15 mins) reboot recovery (vol+ & power buttons)
and do a factory reset..
Hope sincerely it will boot up... :angel:
P.S.: I don't know why i can't post jpg directly, so i zipped into one file...
Click to expand...
Click to collapse
Oh men i appriciate that you wrote everything. Only one problem, I can`t download the zipped file. :/ Also I keep in mind another type of solution for my Huawei, but more on that later. Now I gonna try to flash software by fastboot my hero.
EDIT: beginning gone well
EDIT2: commands not work properly. I done everything like you told me, but you can see error in cmd (cmd is enabled as administrator).

I download adb from this tutorial:
https://www.youtube.com/watch?v=OKRTbv-6Kzc
because previous didn`t work.
As you can see I typed "fastboot flash boot BOOT.img" as you told me, but I get info FAILED. :/
Searched for information and I found, that I need to unlock bootloader once again...and after that every command should work.

Nicramcio said:
I download adb from this tutorial:
https://www.youtube.com/watch?v=OKRTbv-6Kzc
because previous didn`t work.
As you can see I typed "fastboot flash boot BOOT.img" as you told me, but I get info FAILED. :/
Searched for information and I found, that I need to unlock bootloader once again...and after that every command should work.
Click to expand...
Click to collapse
Good work dude.
I previously readed on your post
phone = unlocked
frp = locked
i was thinking you was ready to flash
but evidently that was not correct...
For some unknown reason i cannot post
screenshots so i decided to add them on postimage...
As you can see they are quite same as yours...
https://i.postimg.cc/fTNZvWY9/VNS-L21-C432-B160.jpg
https://i.postimg.cc/x1s2YKhv/Extractor-select-your-update-app-file.jpg
https://i.postimg.cc/5t6MtXWZ/extract-BOOT-RECOVERY-SYSTEM.jpg
https://i.postimg.cc/LswFgmHh/open-command-window2.jpg
Let me know how the work goes on ...
Cheers

Dadditz said:
Good work dude.
I previously readed on your post
phone = unlocked
frp = locked
i was thinking you was ready to flash
but evidently that was not correct...
For some unknown reason i cannot post
screenshots so i decided to add them on postimage...
As you can see they are quite same as yours...
https://i.postimg.cc/fTNZvWY9/VNS-L21-C432-B160.jpg
https://i.postimg.cc/x1s2YKhv/Extractor-select-your-update-app-file.jpg
https://i.postimg.cc/5t6MtXWZ/extract-BOOT-RECOVERY-SYSTEM.jpg
https://i.postimg.cc/LswFgmHh/open-command-window2.jpg
Let me know how the work goes on ...
Cheers
Click to expand...
Click to collapse
Grazie molto!
I done everything with software, step by step just like in your images...
...but again no working commands.
I`ve got only info in CMD that FAILED (remote: Command not allowed).
In other threads I menaged to get info that,
if phone has never been rooted and get custom ROM the bootloader is not unlocked and I need to relock it.
The threads are old and then you have to get a special code from Huawei site,
and then tap fastboot oem unlock "special number" or something like that.
Now I don`t know how to get that code and is there any way to try unlock bootloader and take a step forward?
Yas, we done step forward tomorrow because we know that PC see my device correctly,
we have good firmware but CMD commands caused another problem. :/

Nicramcio said:
Grazie molto!
I done everything with software, step by step just like in your images...
...but again no working commands.
I`ve got only info in CMD that FAILED (remote: Command not allowed).
In other threads I menaged to get info that,
if phone has never been rooted and get custom ROM the bootloader is not unlocked and I need to relock it.
The threads are old and then you have to get a special code from Huawei site,
and then tap fastboot oem unlock "special number" or something like that.
Now I don`t know how to get that code and is there any way to try unlock bootloader and take a step forward?
Yas, we done step forward tomorrow because we know that PC see my device correctly,
we have good firmware but CMD commands caused another problem. :/
Click to expand...
Click to collapse
Due to the conditions your device is in,
I don't know if you can unlock the bootloader.
To read the code you can use DC-Unlocker
(PC or smartphone versions), buy credits for € 4 and try.
The risk is that if it doesn't work, you throw away your money.
A user HERE suggested the idea of using a method
a little more spartan and without money,
but honestly I have never tried it and you could physically break something ...
The choice remains yours, keep me informed for future developments.
P.S .: Bardzo dziękuję za opinię ...

Dadditz said:
Due to the conditions your device is in,
I don't know if you can unlock the bootloader.
To read the code you can use DC-Unlocker
(PC or smartphone versions), buy credits for € 4 and try.
The risk is that if it doesn't work, you throw away your money.
A user HERE suggested the idea of using a method
a little more spartan and without money,
but honestly I have never tried it and you could physically break something ...
The choice remains yours, keep me informed for future developments.
P.S .: Bardzo dziękuję za opinię ...
Click to expand...
Click to collapse
Ciao!
I`ve tried to use this spartan method...but all that nordic combinations were useless...because I still have fake unlocked bootloader. I`ve decided that motherboard in my phone is a piece of **** and merda, so I`ll buy a little damaged phone. The cost of it is 27EUR, so it`s around DC-Unlocker+DC-Phoenix...but I`ll get a device that work properly and have some scratches.
I don`t want to spend money to my damage and dumping motherboard...because I have done this in the past 3 times (the cost of these repairs are around 60EUR). If I had enough knowledge that my motherboard will break down regularly in the future, I`ll buy used P9 Lite much much earlier.
https://allegro.pl/oferta/huawei-p9-lite-lekkie-pekniecie-prawy-gorny-rog-9523407957
Thanks you all, because we tried a lot of methods and solutions! I'm really thankful for all help!
Grazie mille Dadditz mio eroe. Ciao ragazzo! :laugh:

Nicramcio said:
Ciao!
I`ve tried to use this spartan method...but all that nordic combinations were useless...because I still have fake unlocked bootloader. I`ve decided that motherboard in my phone is a piece of **** and merda, so I`ll buy a little damaged phone. The cost of it is 27EUR, so it`s around DC-Unlocker+DC-Phoenix...but I`ll get a device that work properly and have some scratches.
I don`t want to spend money to my damage and dumping motherboard...because I have done this in the past 3 times (the cost of these repairs are around 60EUR). If I had enough knowledge that my motherboard will break down regularly in the future, I`ll buy used P9 Lite much much earlier.
https://allegro.pl/oferta/huawei-p9-lite-lekkie-pekniecie-prawy-gorny-rog-9523407957
Thanks you all, because we tried a lot of methods and solutions! I'm really thankful for all help!
Grazie mille Dadditz mio eroe. Ciao ragazzo! :laugh:
Click to expand...
Click to collapse
I am in complete agreement with you, you made the right choice.
I was very happy to try to help you, especially because
you are a polite and kind person.
I hope to meet again in the future, but not for device's issues ... :highfive:
I wish you all the best.
Regards

stuck on 5% , software install failed, getting package info error
i used huawei p9 lite vns L22 dual sim , device has got failed verfication ,asking for update latest version, then its stuck on 5% .software install failed, i have a poor knowledge about techniqal issues, please help me out