Related
I have a HD mini and have somehow managed to change the clock n the tray to an analog clock the problem is the power icon is over the top and I can't see how to change it back I assum it was digital before. I have seen some posts about holding on the clock but as the power icon is over the top all i get is the notifications manager. Any ideas anyone?
Thanks.
How did you do it ?
If you tried to fix the registry or something . Just change the value back.
--------------
I couldn't figure it out.
Had to clear the Phone - restored it to original settings.
Please include proper instructions/warnings from next time
littlerich said:
I have a HD mini and have somehow managed to change the clock n the tray to an analog clock the problem is the power icon is over the top and I can't see how to change it back I assum it was digital before. I have seen some posts about holding on the clock but as the power icon is over the top all i get is the notifications manager. Any ideas anyone?
Thanks.
Click to expand...
Click to collapse
I had the same problem, I didn't know how it happen. but I had to hard reset my phone
hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.
yiants said:
hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.
Click to expand...
Click to collapse
how does it look like? any screenshoot?
yiants said:
hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.
Click to expand...
Click to collapse
Wow, it works, but effectively in my ROM version 136.xxxx the analog clock is hiddend by the power icon and become unusable.
For whose they do not understood :
When the screen is LOCKED, the top bar apears. You press on this top bar for a while and when you relase it you receive a menu permitting to toggle the clock from analog to digital or reverse.
moscard said:
the analog clock is hiddend by the power icon and become unusable.
Click to expand...
Click to collapse
That's what I noticed. Pity!!
Hi I just got a Nexus 6p and its been great but I have low vision and if I keep the option turned on the phone, it becomes very laggy so I would like to only use it when I need to.
Help would be greatly appreciated!
Thank you .
This isn't exactly what you wanted, but it's kind of close...
I use ADW as my launcher, which allows me to set custom shortcuts on my home screen. Other launchers might offer the same functionality.
I long pressed on my home screen and selected the Add tab on the popup. I then tapped Custom Shortcut, and tapped "Pick your activity." Next, I tapped Activities, scrolled down to Settings and expanded the list. It's rather long, but in that list there is one called "Accessibility(.Settings$AccessibilitySettingsActivity)". I selected that one, gave it a name (what it displays under the icon), and pressed OK. This created a settings gear icon on my home screen that when tapped goes straight to the accessibility options in the settings menu, and then you can tap the toggle for Magnification.
Alternatively, you should be able to do the same thing with Tasker if you have it installed and it's a bit easier. Make a new Task, give it a title (anything) and press the plus to add a step. Select Settings, then Accessibility settings (first option). There is some "if" options, but you can just tap your back button to go back to the step list. Create a widget for Tasker (1x1 task) and select the name of the task you just created. You then need to select an icon for the "widget" by tapping the icon in the lower right that looks like 9 squares in a grid. There are a bunch of built in icons you can choose from, or use your own. The result will be an icon on your desktop that goes to the accessibility options screen, allowing you to quickly toggle the magnification gesture.
Again, sorry this isn't exactly what you asked for, but it would save some taps. Luckily the mag gesture toggle is high enough in the list of options that it should always be on the screen when you open the accessibility settings, so you won't need to scroll.
Lastly, if you are rooted, you could use Tasker to also hit the toggle for you. If you want instructions for that, please do let me know and I'd be happy to share how to do that. It would allow you to tap the "widget" and it would then launch the accessibility settings, wait a second and then tap the toggle, and go back to the home screen. That way you wouldn't need to toggle it yourself.
fury683 said:
This isn't exactly what you wanted, but it's kind of close...
I use ADW as my launcher, which allows me to set custom shortcuts on my home screen. Other launchers might offer the same functionality.
I long pressed on my home screen and selected the Add tab on the popup. I then tapped Custom Shortcut, and tapped "Pick your activity." Next, I tapped Activities, scrolled down to Settings and expanded the list. It's rather long, but in that list there is one called "Accessibility(.Settings$AccessibilitySettingsActivity)". I selected that one, gave it a name (what it displays under the icon), and pressed OK. This created a settings gear icon on my home screen that when tapped goes straight to the accessibility options in the settings menu, and then you can tap the toggle for Magnification.
Alternatively, you should be able to do the same thing with Tasker if you have it installed and it's a bit easier. Make a new Task, give it a title (anything) and press the plus to add a step. Select Settings, then Accessibility settings (first option). There is some "if" options, but you can just tap your back button to go back to the step list. Create a widget for Tasker (1x1 task) and select the name of the task you just created. You then need to select an icon for the "widget" by tapping the icon in the lower right that looks like 9 squares in a grid. There are a bunch of built in icons you can choose from, or use your own. The result will be an icon on your desktop that goes to the accessibility options screen, allowing you to quickly toggle the magnification gesture.
Again, sorry this isn't exactly what you asked for, but it would save some taps. Luckily the mag gesture toggle is high enough in the list of options that it should always be on the screen when you open the accessibility settings, so you won't need to scroll.
Lastly, if you are rooted, you could use Tasker to also hit the toggle for you. If you want instructions for that, please do let me know and I'd be happy to share how to do that. It would allow you to tap the "widget" and it would then launch the accessibility settings, wait a second and then tap the toggle, and go back to the home screen. That way you wouldn't need to toggle it yourself.
Click to expand...
Click to collapse
Thanks a lot!
So it sounds like theres no way to make a widget the will toggle it specifically, without rooting my device.
And if I do root it and use Tasker it will take almost the same time as if I didn't.
If thats no other way then I guess I should root it even though Id prefer not too.
Unless theres another way, Instructions would be great! Thanks again!
Are you familiar with Tasker? It's a paid app, but it's absolutely worth it and you'll find lots of uses for it. I use it to auto reply to text messages while I'm driving, mute my phone when I'm at work (calendar based) turn on wifi when I'm at home (location based), etc.
First thing you need to do is find the location of the toggle on the screen. Go to Developer Settings and turn on "Show Pointer Location". This will make a gray bar at the top of your screen that lists your X and Y coordinates at the top when you are touching the screen. Go to the accessibility settings and touch the toggle, taking note of what the X and Y coordinates are for that touch input.
To simulate touch input, can make a task that opens the accessibility settings as I described above, then add a "wait" command (Task > Wait), enter a value of 1 second. Next enter a command for Code and select Run Shell. Under the command, type "input tap x y" where x and y are the x and y coordinates that you found for the toggle. Make sure the "use root" box is checked. Lastly, add a Tasker command to go to the home screen (back to where you started with the "widget").
Back all the way out of Tasker to save that task, then go back in and press the play button at the bottom left side to test your setup. You should see it launch the accessibility settings, wait a second, toggle, and go home. The first time you run it you will need to grant Tasker root permissions, so be ready for that. If you're not quick to approve it, the task may proceed and go to your home screen before you press approve, so you might need to run it again a second time after you approve it.
If you need more help with, or have any questions, please do let me know. Happy to help.
fury683 said:
Are you familiar with Tasker? It's a paid app, but it's absolutely worth it and you'll find lots of uses for it. I use it to auto reply to text messages while I'm driving, mute my phone when I'm at work (calendar based) turn on wifi when I'm at home (location based), etc.
First thing you need to do is find the location of the toggle on the screen. Go to Developer Settings and turn on "Show Pointer Location". This will make a gray bar at the top of your screen that lists your X and Y coordinates at the top when you are touching the screen. Go to the accessibility settings and touch the toggle, taking note of what the X and Y coordinates are for that touch input.
To simulate touch input, can make a task that opens the accessibility settings as I described above, then add a "wait" command (Task > Wait), enter a value of 1 second. Next enter a command for Code and select Run Shell. Under the command, type "input tap x y" where x and y are the x and y coordinates that you found for the toggle. Make sure the "use root" box is checked. Lastly, add a Tasker command to go to the home screen (back to where you started with the "widget").
Back all the way out of Tasker to save that task, then go back in and press the play button at the bottom left side to test your setup. You should see it launch the accessibility settings, wait a second, toggle, and go home. The first time you run it you will need to grant Tasker root permissions, so be ready for that. If you're not quick to approve it, the task may proceed and go to your home screen before you press approve, so you might need to run it again a second time after you approve it.
If you need more help with, or have any questions, please do let me know. Happy to help.
Click to expand...
Click to collapse
I just realized I need to buy an adapter for that USB C lol.
Before I go ahead with all of this work, your completely sure there is no other way to toggle magnification without rooting?
Thanks!
drewtass said:
I just realized I need to buy an adapter for that USB C lol.
Before I go ahead with all of this work, your completely sure there is no other way to toggle magnification without rooting?
Thanks!
Click to expand...
Click to collapse
Sorry for the delay. I am not aware of any widgets. I couldn't find a widget on the Play Store or light Google searching.
Regarding the adapter, the 6p should have come with a short USB A to USB C cable specifically for connecting to a PC.
drewtass said:
Hi I just got a Nexus 6p and its been great but I have low vision and if I keep the option turned on the phone, it becomes very laggy so I would like to only use it when I need to.
Help would be greatly appreciated!
Thank you .
Click to expand...
Click to collapse
Have you used the built in magnification gesture? You turn it on in accessibility settings, then when you need something to be bigger, just tap the screen 3 times rapidly. You can use pinch to zoom to adjust the text size. When you're finished with it, tap the screen 3 times again. I use it when an app's text is just too small.
EMcTx said:
Have you used the built in magnification gesture? You turn it on in accessibility settings, then when you need something to be bigger, just tap the screen 3 times rapidly. You can use pinch to zoom to adjust the text size. When you're finished with it, tap the screen 3 times again. I use it when an app's text is just too small.
Click to expand...
Click to collapse
Haha Yes I have tried it you have to tap your finger 3 times to magnify which means every time you tap something once it waits to see if you will tap more times and cause slight lag.
Niceeee idea bro, i will try it
moqueet said:
Niceeee idea bro, i will try it
Click to expand...
Click to collapse
Are you saying you will try to make a widget like this?
fury683 said:
Sorry for the delay. I am not aware of any widgets. I couldn't find a widget on the Play Store or light Google searching.
Regarding the adapter, the 6p should have come with a short USB A to USB C cable specifically for connecting to a PC.
Click to expand...
Click to collapse
No problem!
Lol I was so excited for my new phone I never checked but I found it !
Thanks I will root it when I get the chance.
i have the same exact problem,i absolutely love the feature as i wouldn't be able to use any phone with out it but it also gets frustrating sometimes (the touch delay) for example in the dialer app or Instagram.
a toggle in the notification panel would be great or an app through which you specifically enable/disable the gestures for each individual app.
any other alternative would be appreciated, somebody posted the same issue here with a possible fix (which i am not exactly sure how to implement) https://code.google.com/p/android/issues/detail?id=39685
hassanabid94 said:
i have the same exact problem,i absolutely love the feature as i wouldn't be able to use any phone with out it but it also gets frustrating sometimes (the touch delay) for example in the dialer app or Instagram.
a toggle in the notification panel would be great or an app through which you specifically enable/disable the gestures for each individual app.
any other alternative would be appreciated, somebody posted the same issue here with a possible fix (which i am not exactly sure how to implement) https://code.google.com/p/android/issues/detail?id=39685
Click to expand...
Click to collapse
Nice to know I'm not the only one.
Sorry for the late reply been busy with school. It would be nice to have this option maybe like a button shortcut .
Hey guys so that way of using tasker is very slow and not feasible.
Is there any other way of making a quick toggle magnification gestures. It would be nice if I could hold the menu button to enable it. (IPhone tripple tap home button to toggle)
Thanks again.
I have low vision as well and have also found that leaving the magnification gesture turned on causes the phone to be laggy even when I don't actually have the magnification turned on. Instead of using that, I rooted my phone, changed the global DPI and I use App Settings (an Xposed module) to increase the font size in some apps or force the standard DPI in apps that have issues with the custom one.
There's a gestural workaround I've employed: if instead of just putting down my finger I drag my finger slightly (in any direction) then the lag almost disappears. Doing this helps a lot but obviously its a bit of an awkward gesture.
Al--g said:
There's a gestural workaround I've employed: if instead of just putting down my finger I drag my finger slightly (in any direction) then the lag almost disappears. Doing this helps a lot but obviously its a bit of an awkward gesture.
Click to expand...
Click to collapse
How did you set it up?
There's no set up. I just do that gesture to get the scrolling to stop when I have magnification enabled.
GuinnessX said:
How did you set it up?
Click to expand...
Click to collapse
Quick how to for any other S7 Active owners who like me were disappointed that the Active Key could not be used as a dedicated flashlight button.
I used the Tasker app with the free App Factory plugin to create an app that toggles the flashlight state.
1. Open Tasker and create a new task (I called mine Flashlight Toggle)
2. Click the Add action button (the + at the bottom) and the Select Action Category window will pop up
3. Type Torch into the filter at the bottom of the Select Action Category window
4. In the Action Edit screen select Toggle from the dropdown in Set
5. Press back to return to the Task Edit screen
6. In the lower right press and hold the icon button and assign the task an icon
7. Press back to return to main Tasker screen - press and hold on the Flashlight Toggle task (or whatever you called it) task to highlight it
8. Select Export from the menu button in the upper right and export as an app.
8a. You may need to install the apk you just created manually depending on permssion settings with tasker (thanks for heads up 78c10)
9. Now open Settings and Navigate to the Active Key settings
10. You should have an app named Flashlight Toggle that you can now assign to the Active Key
Congratulations, you now have a dedicated flashlight button on your S7 Active.
I don't mean to sound critical, so please forgive me, but wouldn't it have been easier to download a flashlight app, and set it to the button?
I personally can't believe you didn't get more feedback on this. What a beautiful, elegant solution.
I was shocked to find that there was no option available to bind a long press of the action key to flashlight, how stupid. You fixed it, and you fixed it in a beautiful way! Thanks.
@Chr0nos77 I had done this previously, but was plagued with either apps that would then open and not turn off the torch by holding it, or having ads emblazoned across my device.
Smooth solution. The only thing that differed from the instructions is that after I exported the app, I had to install it before I could use it. So, I guess don't miss out on that step.
For some reason, I had to factory reset my phone to get the app factory to install. Oh well.
Only problem I'm having with this is that even though I have the app in my whitelist, if the phone is in deep doze the button does not reliably launch the flashlight. Have to press unlock button first then the active key. Still good but would be good if I could somehow force it to work with aggressive doze.
Is there a way to set the flashlight to full brightness? When you turn on the flashlight in the notification panel, it's only set to 30% of it's brightness, but when you open the Activity Zone, you can turn it all the way up to 100%, is there some way to make the 100% setting standard?
Hello. Tasker cannot support Torch in Android 5.0.1. Is there some other way to do it?
akran said:
Hello. Tasker cannot support Torch in Android 5.0.1. Is there some other way to do it?
Click to expand...
Click to collapse
I'm not sure in 5.0.1 - I used this with my S7A which was Android 6 out of the box.
gotta say.. works VERY well
Thank you for this, I've been looking for a way to be able to skip tracks with the active key and found a way to do it using the same logic you described here (made an app for next track and on for previous). If anyone is interested let me know and I'll put instructions for how I did it.
miniminus said:
gotta say.. works VERY well
Click to expand...
Click to collapse
kuaka said:
Quick how to for any other S7 Active owners who like me were disappointed that the Active Key could not be used as a dedicated flashlight button.
I used the Tasker app with the free App Factory plugin to create an app that toggles the flashlight state.
1. Open Tasker and create a new task (I called mine Flashlight Toggle)
2. Click the Add action button (the + at the bottom) and the Select Action Category window will pop up
3. Type Torch into the filter at the bottom of the Select Action Category window
4. In the Action Edit screen select Toggle from the dropdown in Set
5. Press back to return to the Task Edit screen
6. In the lower right press and hold the icon button and assign the task an icon
7. Press back to return to main Tasker screen - press and hold on the Flashlight Toggle task (or whatever you called it) task to highlight it
8. Select Export from the menu button in the upper right and export as an app.
8a. You may need to install the apk you just created manually depending on permssion settings with tasker (thanks for heads up 78c10)
9. Now open Settings and Navigate to the Active Key settings
10. You should have an app named Flashlight Toggle that you can now assign to the Active Key
Congratulations, you now have a dedicated flashlight button on your S7 Active.
Click to expand...
Click to collapse
bandario said:
I personally can't believe you didn't get more feedback on this. What a beautiful, elegant solution.
I was shocked to find that there was no option available to bind a long press of the action key to flashlight, how stupid. You fixed it, and you fixed it in a beautiful way! Thanks.
Click to expand...
Click to collapse
78c10 said:
@Chr0nos77 I had done this previously, but was plagued with either apps that would then open and not turn off the torch by holding it, or having ads emblazoned across my device.
Smooth solution. The only thing that differed from the instructions is that after I exported the app, I had to install it before I could use it. So, I guess don't miss out on that step.
For some reason, I had to factory reset my phone to get the app factory to install. Oh well.
Click to expand...
Click to collapse
can anyone give me the apk that the app creator made?
muneebrocks said:
can anyone give me the apk that the app creator made?
Click to expand...
Click to collapse
Yes!
Here is a link: https://drive.google.com/open?id=0Bw15QUNVlpHoMjdqdWVJbXh2YjA
All credits to Kuaka! Thanks for this nice tweak!
Arteush said:
Yes!
Here is a link: https://drive.google.com/open?id=0Bw15QUNVlpHoMjdqdWVJbXh2YjA
All credits to Kuaka! Thanks for this nice tweak!
Click to expand...
Click to collapse
thank you so much
i made a bixbybutton app using this method,
to enable our activity button, to be a bixby button
(i included it into the Ufrim modder
Is it possible to use this Tasker and create mobile data button/apk to toggle on/off data for Oreo?
dedicha said:
Is it possible to use this Tasker and create mobile data button/apk to toggle on/off data for Oreo?
Click to expand...
Click to collapse
https://www.xda-developers.com/how-...ttings-tile-toggle-on-samsung-galaxy-devices/
patzyalex said:
https://www.xda-developers.com/how-...ttings-tile-toggle-on-samsung-galaxy-devices/
Click to expand...
Click to collapse
Unfortunately, not working on my phone, maybe because of oreo update.
dedicha said:
Unfortunately, not working on my phone, maybe because of oreo update.
Click to expand...
Click to collapse
It does work on Oreo and not only for me, other users report it as well.
patzyalex said:
It does work on Oreo and not only for me, other users report it as well.
Click to expand...
Click to collapse
I have tried it, it just reordered the position of the icons, no mobile data toggle
Finally, success!
I read another command in the posts, that did the job!
Just put that command in the adb shell:
settings put secure sysui_qs_tiles "$(settings get secure sysui_qs_tiles),MobileData,Hotspot"
I have no idea why the first one did not do it and what exactly is the difference, but this command did it !
I DLed this
https://apkpure.com/flashlight-toggle-simple-and-minimalist/com.nomadicratio.flashlighttoggle
its quick... a bit of a screen white for a split second but then it turns on and off just fine
Hi all,
I got my phone yesterday and moved from my OnePlus One to this new and awesome phone.
In my 1+1 while pressing the GPS (location) option in the notification bar its open a section where you can choose between the different GPS modes (off, device only, battery saving and high accuracy). While in this phone when you press the GPS icon its only turning on and off without any option changing the mode (I have to long press in order to get the settings and then change the mode.)
There is any way to make it the same as my 1+1? I'm gonna root my phone in a few days if it matters.
Thanks!
This option is in los, not in oos. Your oneplus one is on oos?
Long press the location toggle in the pulldown and you can change the GPS/location options you seek
bretzelpopo said:
This option is in los, not in oos. Your oneplus one is on oos?
Click to expand...
Click to collapse
I think my 1+1 is on lineage os
Eric214 said:
Long press the location toggle in the pulldown and you can change the GPS/location options you seek
Click to expand...
Click to collapse
I know that you can long press and get to the settings and change it. I'm looking for the faster way to change between battery saving and high accuracy.
liadatz said:
I think my 1+1 is on lineage os
So you have to switch Lineage, if you want that feature
Click to expand...
Click to collapse
Hi guys,
I really don't understand how work permanent notifications on this device.
I'm aware we can manage them for each app from notification panel, and from "Notification Menu".
- I can't prevent a specific app to put notifications on lockscreen without disabling "All Notifications" on lockscreen from "Notification Menu",
- I can't prevent a specific app to appear in status bar :cyclops:
I've got a OP5 and I can tuneup apps like I want without problem, but not with this device.
Do you have any piece of advice or special app to use to do what I want ?
Bye.
[Edit] : Well, it seems that to be able to hide a specific app from lockscreen, I have to put a PIN/schema or some sort of security to have the option to hide on lockscreen
When you get notification, long press on it and there would be options. You can select more options, and there's an option for lockscreen.
goorek said:
When you get notification, long press on it and there would be options. You can select more options, and there's an option for lockscreen.
Click to expand...
Click to collapse
Thanks, lockscreen option appears after I put a PIN code.
Last thing I have to find is how to prevent apps to put notification in statusbar.
The same way, long press notification and block all.
goorek said:
The same way, long press notification and block all.
Click to expand...
Click to collapse
No, I don't want to block all.
I want some apps to put notification in notification panel only, but not in statusbar.
I have "services" like Tasker, Viper4Android, Mi-Fit who put permanent notification in order to stay alive (I suppose), they don't bother me in notification panel, but I don't want to see them in status bar.
chrissss91 said:
No, I don't want to block all.
I want some apps to put notification in notification panel only, but not in statusbar.
I have "services" like Tasker, Viper4Android, Mi-Fit who put permanent notification in order to stay alive (I suppose), they don't bother me in notification panel, but I don't want to see them in status bar.
Click to expand...
Click to collapse
Enable system ui tuner, enable power notifications in there and then you can set level of each app separately with long tap on notification. Exactly what you are looking for.
_mysiak_ said:
Enable system ui tuner, enable power notifications in there and then you can set level of each app separately with long tap on notification. Exactly what you are looking for.
Click to expand...
Click to collapse
Many thanks, System UI Tuner was activated but I've not seen Notification option.
Last think I've to find is how to assign ''Menu Key'' to one of the hardware keys without having to install a third-party app (actually I have ButtonMapper) .
In Titaniumbackup I can't access ''Menu'' without ButtonMapper.
chrissss91 said:
Many thanks, System UI Tuner was activated but I've not seen Notification option.
Last think I've to find is how to assign ''Menu Key'' to one of the hardware keys without having to install a third-party app (actually I have ButtonMapper) .
In Titaniumbackup I can't access ''Menu'' without ButtonMapper.
Click to expand...
Click to collapse
Yeah, it's hidden a little bit
For the button remap - it might be possible to remap the HW buttons by system files modification, though probably not worth the effort. With Button Mapper you have effectively several additional fully customizable "buttons" (double tap + long tap)..